Hot Licks Flame Thrower Kit Install Ford Focus ST
ฝัง
- เผยแพร่เมื่อ 3 ต.ค. 2024
- Step by step video on how to install the Hot Lick Flames On Command Exhaust Flame Thrower Kit on a Ford Focus ST. Kit was purchased directly from Hot Licks and I will provide a link below. www.hotlicksex...
Note: This kit is designed for off road and track use only and is not recommended for cars with catalytic converters, use at your own risk.
#fordfocusst #fordfocusrs #carmods #fordperformance - แนวปฏิบัติและการใช้ชีวิต
Best dad award goes to this guy
Amazing!
Can you turn the button on and off while driving? Or will you have to stop the car
i have the kit sitting in my garage just been a little nervous to put it on...
DOES THE CHECK ENGINE TURN ON??????
Thank you for the amazing tutorial. Been thinking about doing this to my ST! One thing I’m curious about is if you have a crackle tune, can you get loud pops with flame. How do you mess with/time the button if you have crackles.
Yes he does have a crackle/pop tune from edge autosport and from stratified. He does get pops that are super loud with the flame as well especially while using the switch and downshifting.
@@BLUECOLLARGARAGEalright that solidifies my purchase lol. Thank you!! Can you post a short film or a regular video of sound clips. Revving, “launch control”, red line, downshifts, while driving, etc. Also does your son have an Instagram?
I’ll try to get my son to do some more videos and I’ll get you his instagram and TikTok.
I thought the flame would mess up the turbo
No issues to far. The fuel doesn’t ignite till it hits the spark plug at the tailpipe.
Just one doubt since I don't speak English. where the red and black wires that enter the fuse box are connected?
Red wire goes to coils and switch, black wire goes to switch and fuse box.
While driving and doing it do you want to fully let off gas or give it a little gas?
Give it gas
What wire am I looking up for the ignition signal ????
🔥
I know vid is a little old but is it possible to shoot flames in an automatic while driving or is it only possible in a manual?
I have this on my car, when you’re driving do you use the same method as when parked or can you just go into high rpm and press button ?
Yep pretty much, you can also do it while downshifting.
have you had any problems with it also is there any Cadillac converters on the car
No issues at all. Car is cat less it is not recommended to run this with the cat intact.
My check engine light is on what should i check i installed everything
Is the car running just fine? If so just run down to your local auto parts store and have them scan for codes to help pinpoint what the issue is.
@BLUECOLLARGARAGE it's gone now it went off on its own 😅 but I can't shoot any flames I have a 2014 toyota corolla s , do I have to be stationary or just rolling in the road bc I don't wanna push it and it cut off my car while it's moving
Having trouble finding anyone to install my flame kit 😒. Do you know anyone close to New Orleans, Houston, Alabama area I’m from the 504
Sorry bud no one that I know of down in that area.
What tail lights are those? Hard to find clears for my 2013 st
Found them found them off of eBay
Can you make a video explaining how to use the button correctly
I will see what I can do.
@@BLUECOLLARGARAGE ok thank you
Do you need a full straight pipe for the kit to work?
It will still work with mufflers but for best results yes straight piped.
I guarantee you make over 400HP with these cars or just have bigger injectors pushing more fuel you with blow the exhaust off with the flames you get, my fiesta makes almost 400hp and WOT I let off and it will shoot a big $ss flame
Any way we can get a rpm video mine won’t shot the flames it won’t ignite just pops
Same here if u found the fix pls lmk