A very worthy restoration of a very old hand cranked grinding stone,it will make a lovely display in a school of engineering for a typical example of the old ways,gets my 5 ☆ rating
You should look up the hand cranked hammer drill, I wish someone had recorded that restoration. It's nice to have these restoration videos, really let's you see how it works.
Monsieur, vous avez restauré cette vieille meule pour qu'elle soit non seulement belle à regarder mais aussi très utile. Un simple homme l'a conçu il y a longtemps et il en serait très fier. Voilà un petit morceau de notre histoire partagée.
J'adore regarder les vidéos de restauration d'objets anciens. Je trouve que c'est respecter le travail des anciens que de remettre ces objets en état neuf. Pour moi, l'antiquaire qui veut que l'objet soit "dans son jus" est un parfait gland. Un objet d'usage et l'histoire de ceux qui l'ont maniés ne sont respecté que dans un bel état. Pas avec une tonne de rouille, fut elle amoureusement patinée.
Very nice. Just a couple of suggestions. I would paint the name emblem black, or possibly a different color to make it stand out more. I would also make the legs the width of that standing edge on the frame. The standing edge is there to help keep the legs from moving, but it only works if you have a leg that fits snug to the edge. That is also why there is only one bolt. I am guessing a 2x4 is about right. Your legs will not be stable for long. Did you use that old fence post to preserve the old look? Good idea, but they are not wide enough. And last, I would bush that stone somehow so that it won't move on the axis and then dress the stone.
Cette vidéo ainsi que celle avec la brouette aurait fait grand plaisir à mon grand'père, lui qui fut carrossier, charron, maréchal ferrand puis garagiste. Le travail du bois, c'était sa grande passion. Et les meules à eau, il y en avait une en état de marche dans son jardin.
Great restoration, particularly the welding. Shame you did not reface the stone. Grande restauration, particulièrement la soudure. Dommage que vous n'ayez pas refacé la pierre.
EXTRA ! aucun nombrilisme ni égocentrisme épuisant JUSTE LA BEAUTÉ DU TRAVAIL,LE TALENT ET LA RÉUSSITE ! merci a vous et bravo pour cet instant de plaisir partagé ;-) (abonné et pouce bleu )
Looks nice! One thing, the large holes on the top of the axle brackets are there so that you can pour Babbit bearings for the axle. There are several good instruction videos on TH-cam on the process.
Not like it is. It will not last very long without Babbitt bearings. And the legs are wobbly - since they are not flat on the tank side nor are they shaped to the channels.
That looks really nice ! You are the only other person I know that uses MIG to weld cast iron, it is said that this is impossible as it will crack while cooling, but I have used this a lot on exhaust manifolds with complete success, now you need to make a Shave Horse ! Chris B.
look at that beautiful patina even after cleaning it up with a grinding wheel, that's a good solid piece of iron right there, great little tool, grind some corn or whatever and sharpen a knife at the same time!
Great restore! Loved seeing the metal working to fix all the broken parts. If I could as for one thing it would be electric rust removal and/or sand blasting. Thank you for making these videos! Please keep them coming they are inspiring!
Wieder ein wunderbares Restaurationsvideo, auch wenn es fast schief gelaufen wäre. Zum Glück kam die Katze noch vorbei und hat vor dem Zusammenbau nochmal alle Teile gecheckt ;)
Good job so please use a wire brush more strong, what you use just remove superficial oxide do not expose the metal. also is better finish if you use filling premier, one or two hands as required, and some sand paper before paint on casting
Génial je découvre tes vidéos je les trouve très chouettes. Ca m'inspire, je pense avoir une maison dans pas longtemps, perdue dans la forêt, je vais pouvoir avoir un petit atelier en attendant je regarde tes vidéos ça me donne des idées ;)
J'aime bien votre restauration ! Mais les vis BTR , c'est dommage , çà fait pas d'époque !!! I like your restoration ! But the screws BTR, it's a pity, there is no era !
It looks like there was originally babbitt material around those axles. I can't think of any other reason there would be such a large opening for them to spin in.
Pas de coup de patte du Rôminet, cette fois-ci? Il ne faisait que passer? :) Toujours du beau boulot, par contre! J'aime bien vos vidéos! Merci de les partager! Bien le bonjour de Montréal! :)
Look up a tool called a Dressing Tool. It's used to true up the surface of grinding stones on bench grinders. Maybe you could use one or a couple to true up yours? Just an idea. Anyways, great build video!
A very worthy restoration of a very old hand cranked grinding stone,it will make a lovely display in a school of engineering for a typical example of the old ways,gets my 5 ☆ rating
You should look up the hand cranked hammer drill, I wish someone had recorded that restoration. It's nice to have these restoration videos, really let's you see how it works.
Galinhas pitadinha
Gj guys
Queria ver la makina de punto casera
What do you mean show piece I would use that every day
Love the style on this one.
Monsieur, vous avez restauré cette vieille meule pour qu'elle soit non seulement belle à regarder mais aussi très utile. Un simple homme l'a conçu il y a longtemps et il en serait très fier. Voilà un petit morceau de notre histoire partagée.
Wow, that thing must be old one, never seen a cast iron water bucket on grinding stone machine. Your welding repair is great.
J'adore regarder les vidéos de restauration d'objets anciens.
Je trouve que c'est respecter le travail des anciens que de remettre ces objets en état neuf.
Pour moi, l'antiquaire qui veut que l'objet soit "dans son jus" est un parfait gland.
Un objet d'usage et l'histoire de ceux qui l'ont maniés ne sont respecté que dans un bel état.
Pas avec une tonne de rouille, fut elle amoureusement patinée.
Great job but get rid of those modern bolts. And get the stone trimmed in a stone yard. It will greatly increase its value.👍
Водяное колесо?А может все-таки точило?
Good job, and nice welding on that cast iron.
Very nice. Just a couple of suggestions. I would paint the name emblem black, or possibly a different color to make it stand out more. I would also make the legs the width of that standing edge on the frame. The standing edge is there to help keep the legs from moving, but it only works if you have a leg that fits snug to the edge. That is also why there is only one bolt. I am guessing a 2x4 is about right. Your legs will not be stable for long. Did you use that old fence post to preserve the old look? Good idea, but they are not wide enough. And last, I would bush that stone somehow so that it won't move on the axis and then dress the stone.
Блин, я подумал он будет пескоструй использовать! Да и это не восстановление!!!
Beautiful restoration job. I think it's very satisfying to bring this old equipment back to its working life! Thanks for sharing!
It's amazing that the nuts & bolts wren't completely fused. Must be some of that good ol' American Iron.
... And to think he did it all without once mentioning how "IMPOSSIBLE" the restoration was!
Nice work.
La verdad me gusta ver restaurar las antiguedades. Es interesante y se aprende.
Top top top ! Un magnifique travail !
beautifully restored with rustic finish. adorable!
Wonderful piece you’ve restored.🙂
That welding work was great. Really loved the repair job.
Cette vidéo ainsi que celle avec la brouette aurait fait grand plaisir à mon grand'père, lui qui fut carrossier, charron, maréchal ferrand puis garagiste. Le travail du bois, c'était sa grande passion. Et les meules à eau, il y en avait une en état de marche dans son jardin.
Nice one all that work paid off . looking good now it's finished old school style 😎
C'est super de "redonner vie" à tous ces outils qui ont toute une histoire derrière eux.Merci .Thanks
Beau travail ! félicitation!! c'est toujours émouvant de redonner vie à de vieux outils oubliés. Merci pour cette vidéo!
Once again going where many would just say to far gone! Fantastic.
You truly are a Perfectionist, The way you pay attention to the smallest of detail is impressive, , ,👍👍👍👍👍
Great restoration, particularly the welding. Shame you did not reface the stone.
Grande restauration, particulièrement la soudure. Dommage que vous n'ayez pas refacé la pierre.
Yeah very well done ,only I would use grease rather than a liquid oil.
oil spots maybe a really thick oil and just a few drops before use
BRAVO Monsieur d'avoir su refaire ces gestes de nos pères...
Excellent job well done.
I'm always astounded by the durability of wood.
just brilliant a man after my own heart
¡Felicidades! Está genial tu trabajo!! : )
EXTRA ! aucun nombrilisme ni égocentrisme épuisant
JUSTE LA BEAUTÉ DU TRAVAIL,LE TALENT ET LA RÉUSSITE !
merci a vous et bravo pour cet instant de plaisir partagé ;-) (abonné et pouce bleu )
Chapeau bas ! Vivement la prochaine video
Excellent restoration , another piece of history saved
Looks nice! One thing, the large holes on the top of the axle brackets are there so that you can pour Babbit bearings for the axle. There are several good instruction videos on TH-cam on the process.
Les pattes en bois sont superbes... belle restauration
This is the real deal! A little love and sweat goes a long way. Ready for the next generation.
Not like it is. It will not last very long without Babbitt bearings. And the legs are wobbly - since they are not flat on the tank side nor are they shaped to the channels.
Excellent craftsmanship buddy. 🤔
If you are able to retain it your next generation will also value it, i am sure.Very nostalgic project.
That looks really nice ! You are the only other person I know that uses MIG to weld cast iron, it is said that this is impossible as it will crack while cooling, but I have used this a lot on exhaust manifolds with complete success, now you need to make a Shave Horse ! Chris B.
look at that beautiful patina even after cleaning it up with a grinding wheel, that's a good solid piece of iron right there, great little tool, grind some corn or whatever and sharpen a knife at the same time!
Love your work.
Beautiful restoration.
Nice Job !!!
Je découvre votre chaîne ,et se que vous faites est super de restaurer ses objets anciens .bravo à vous !!👍👍👍
Very cool!!! Great work.
Awesome, felt very happy
Wonderful video, thanks!
Wow, that is a beatiful resto! Great job!
Que bonito es devolver a la vida una joya como esta.
Felicidades
Great restore! Loved seeing the metal working to fix all the broken parts. If I could as for one thing it would be electric rust removal and/or sand blasting. Thank you for making these videos! Please keep them coming they are inspiring!
Wieder ein wunderbares Restaurationsvideo, auch wenn es fast schief gelaufen wäre. Zum Glück kam die Katze noch vorbei und hat vor dem Zusammenbau nochmal alle Teile gecheckt ;)
Wow.: great job.
very satisfying video. feel like I have been productive just watching it. lol
OMG!! Seamus Levine has been transformed into a Machine!! @8:15 (Family Guy Reference).
Very nice
Salut c’est une très belle restauration 👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍
Nice. Excellent filmwork too.
What a wonderful work
Bravo love it love it ...
Que legal ! tenho um desse aí só que e menor
Brilliant!
Nice restoration. I need that to buff my car.
Felicidades!! Buen trabajo!!
Maravilhoso !!!
Good job so please use a wire brush more strong, what you use just remove superficial oxide do not expose the metal.
also is better finish if you use filling premier, one or two hands as required, and some sand paper before paint on casting
Perfect video.
Does anyone else feel relaxed watching this?
Génial je découvre tes vidéos je les trouve très chouettes. Ca m'inspire, je pense avoir une maison dans pas longtemps, perdue dans la forêt, je vais pouvoir avoir un petit atelier en attendant je regarde tes vidéos ça me donne des idées ;)
@@ladbrestorationerci. Ca marche bien ce genre de meule ?
Cool project. Nice job
J'aime bien votre restauration !
Mais les vis BTR , c'est dommage , çà fait pas d'époque !!!
I like your restoration !
But the screws BTR, it's a pity, there is no era !
Was the original color green? What wood did you guys use? It ended up looking good.
Muy buen video amigoo!!! sigue asi
Hola, dos cositas: NO LE HAGAS CASO A LOS QUE NO LES GUSTA. A mi me ha gustado mucho. La otra, muy buen trabajo. Like y suscrito !!
@@ladbrestoration Gracias a ti y estaremos en contacto, pasate por mi canal a ver que te parece y me comentas. Gracias.
super !!
It looks like there was originally babbitt material around those axles. I can't think of any other reason there would be such a large opening for them to spin in.
Cat is awesome:)
溶接するところすんげぇ好き
La restauración es muy linda. Pero le hubiera cambiado las chunaseras Para que rodara con más balance. PERO LUCE MUY LINDA. ! FELICIDADES 🎊
Pretty damn good restoration.........
Bravo!
fabulous! What a father and son project... thanks for the share.
Good one! But your angle grinder needs a repair on cable, i saw wires.
عمل متقن .
yo tengo una de estas, es increible ver otra igual.
Very nice restore job. It'll last another 50 years.
Excellent restoration. I would have liked to see the company logo restored, perhaps in gold, but that's quibbling.
You are honest to your work. And very hardworking too. A Salute to you sir.
Pas de coup de patte du Rôminet, cette fois-ci? Il ne faisait que passer? :)
Toujours du beau boulot, par contre! J'aime bien vos vidéos! Merci de les partager! Bien le bonjour de Montréal! :)
Very nice.
Enjoyed amd Thumbs Up
What welding process was that? MMA/stick/ARK?
very very nice ..i love it
Cool 🔥🔥🔥👍👍👍
Look up a tool called a Dressing Tool. It's used to true up the surface of grinding stones on bench grinders. Maybe you could use one or a couple to true up yours? Just an idea. Anyways, great build video!
Great!!! :D
very good work keep moving
I really like this.
good restored man
I suggest you to get some rust remover. It would save u time and preparation for painting would be significantly better.