Lexus Toyota Code P1349 Diagnose and Fix
ฝัง
- เผยแพร่เมื่อ 5 ก.ย. 2024
- The car in this video is 2000 Lexus GS300. The oil control valve was good. The MIL was on because the filter was completely blocked by Sludge Buildup. The code never comes back after replace with the cleaned filter.
I just redid my 2zz lift OCV today and I got my lift back with no clicking or RPM cutoff early on.
My filter screen was SUPER clean and spotless. The OCV itself is super clean but it malfunctioned because the unit won't engage at lift.
Installed a brand new aftermarket one and the car is back to its old self again.
Great video! Helped me get going in the right direction.
Glad it helped.
was thinking this was reason for a sporadic miss now I believe it is an injector leaking at idle and not under load causing a misss
on minute, seconds 3:30 lower of the vvt that 1/8' pipe were is connected too. thanks
what are the cables that you used to apply the 12 volts called?
I was have same this issue, code p1656 I shange the timing sensor and oil filter without solve this issue, that problem is was from computer engine
That aint the problem, it the Timing belt stretched. Replace your timing belt
What is the name of the small oil filter? All searches just turn up full size ones. Thanks for the video.
I have same question I don't know the filter name and where is it
Thank you.
Hope the video help.
Hello nice Video does the engine light come back on ? or is the Problem fix and your engine is runnig good ?
thanks for the video.. i replaced my ocv and my screen filter with toyota oem.. but that P1346 code is always pending... sometimes car hesitates and sometimes it runs perfect the cel comes and goes when ever it wants.... i read that code is for a timing belt skipping a tooth.. im just frustrated
Mike Kay did you get it fixed ?
i’m currently having the same problem did you fix it?
Yes, those codes mean timing belt is off and not the solenoids
Clean the filters first then reset the code/s.
I changed ocv and cleaned filter and I still get the code??
What is the name of the small oil filter
Hi @expandableme , where do I locate my valve in 2006 IS250? Much help needed.
This link may give you the answer. Looks like there are two valves. One is on intake and the other is on the exhaust side.
ww2.justanswer.com/uploads/SK/skyvisions/2014-08-17_014813_08_is250.jpg
+ExpandableMe thank you so much!
Has the engine light come back on
i got a 99 lexus rx300 3.0 did the timing and water pump because had an oil leak coming from the crankshaft seal front no also changed engine oil no check engine light before but after got this code p1349 bank 1 and car seems like shutting off could it be due to this sensor?
No. Very likely due to problems with the timing belt replacement.
If it said vvt then yes thats your problem and most likely only problem
hey nice video what was the small filter called to look it up ?
VVTi oil control filter
not common if you change your oil looks tell the whole story
juan rodriguez Yup same thing I was thinking.
clean up the filter on banjo bolt
what was your symptom of error for those of us that don't have check engine lights and like to work on cars like its the 70s
I wouldn't know the symptom was there if the check engine light wasn't on. Sensitive drivers might notice a small power loss in high rpm and fuel economy.
FYI is is no longer the 1970s, you couldn't ask people online for help then either.
Perfect way to bench test this..Clips are firmly attached to the solenoid and tapping the Battery with the loose lead.. The GS motor is uniquely different than the ES.. His OIL is filthy...Just saying
What did you use to clean it?
Clean with brakes cleaner along with a tiny glasses flat head screw driver to remove oil sludge. I would head to dealer for a new filter if it wasn't on the weekend.
Hey man did your code ever come back? I cleaned mine and it was ok for a while but it came back.
Never.
+ExpandableMe OK. I think I have more serious problem because my filter and control valve are very clean.
+Super Vitz
Did you test the control valve as I did in the video?
+ExpandableMe Yes I tested with 12v and it works like yours.
+Super Vitz
I would Check for cracks/broken wires. If good, replace the oil control valve or require some advance computer diagnostic. Assuming you have no other codes?
Hi there. Can I clean the filter with petrol (gasoline)?
Try it and let us know. I cleaned mine with brake cleaner.
I cleaned the filter with clean cloth, it was not dirty and I could see it through.
i.imgur.com/NbxsYk9.jpg
+El Peters
Looks good. Mine was completely blocked.
CHANGE OIL DONKEI HEAD