Nice quick tutorial on wood finishes. Like how u broken the different types down to 3 groups and how u explained them. I've basically just been using "tung oil" and a wax finish but now want to experiment a bit more after seeing this video
Hi just discovered your channel 👏👏, hope you don't mind me asking but after some advice if possible, I've recently moved into a log cabin and have sanded the walls with p120 on my horbital sander, Whats happened is its left white marks where sanded which I would expect, but the problem i have is when re varnishing it doesn't cover the white up, I've tried a water based and a yacht varnish but still shows very badly, Just wondered if you had any advice what else I could try. Many thanks regards gary
I recommend reading the Bob Flexner book "Understanding Wood Finishing" if you want to know finishes. It breaks many of the myths that still exist about finishes. For example, we can know what's in these finishes. Most of the information about what's in the products is published for chemical industry people but not woodworkers.
what is varnish exactly? the term seems to be misused as both a specific and general term. what is in varnish? is shellac varnish or is it a type of varnish? confusing
Just a trick for mixing those finishing products in a can: instead of just using a stick or wood leftover I prefer an old hand mixer which would be too weak for kitchen duty. Instead of throwing it away, re-use it to mix those wood finishers and then immediately clean the excess from the metal parts of the mixer. This would make a very well mixed product in a matter of seconds.
I'm not an expert but I built a cedar table and bench for our patio and used Minwax tongue oil. As needed I'll just add another coat to it. No sanding needed.
I consider the wood working community on Y/T to be priceless for beginners like myself. Almost any question will receive numerous suggestions. I hope to someday reach a level where I can offer help. Thank you all !
The best product I've found to ebonize wood is black ink. A big bottle is sold by office supply places, and is inexpensive. The Speedball brand of India ink what I have used. It dries really fast and looks great.
Can you help me out, I'm regularly confused by the term, "varnish." What exactly did you add to the Danish oil? In addition, I also hear polyurethane referred to but rarely is it stated as water or oil based. I guess it's assumed to be oil based most of the time but with all the advances in water based products maybe that's wrong.
If I am correct, most "varnishes" are a hard film. Polyurethane for example. Poly does come in water or oil-based versions. It should be clearly (although sometimes in small print) marked on the front of the label. From my personal experience, water based poly usually has a milky look until it cures. I hope this helps, but I could be mistaken. "Stumpy Nubs" has some decent finish videos as well that might be worth taking a look at. Not that Colin does a bad job!
Dyes are a helluva subject. I bought a Keda powder dye kit with the intent of using it to see if I could dye some wood purple. Well, it turns out that figuring out color mixtures is NOT intuitive AND the dyes are incredibly difficult to work with in terms of mess and staining stuff (eg, fingers!!!!!!!!!!!). I never got the color I wanted, BTW.
I read an article on black dye and they used India black ink and that is the best, pure black can’t see the difference between ebony and the dye. One application is enough
Suzy, Jonny, Michael, Georgi(Yorgos), being civilized kept sending cools tips, all others shut up and stayed in check. They had never seen wood before.
For a very dark and beautiful black, I use India ink. Very easy to apply and finish.
Great job!
Thank you, Colin. Great walk-through Wood Finish options.
Now THAT was educational. Thanks Colin
Nice quick tutorial on wood finishes. Like how u broken the different types down to 3 groups and how u explained them. I've basically just been using "tung oil" and a wax finish but now want to experiment a bit more after seeing this video
Excellent video, Colin! Thanks a bunch! 😃
Stay safe there with your family! 🖖😊
Hi just discovered your channel 👏👏, hope you don't mind me asking but after some advice if possible,
I've recently moved into a log cabin and have sanded the walls with p120 on my horbital sander,
Whats happened is its left white marks where sanded which I would expect, but the problem i have is when re varnishing it doesn't cover the white up,
I've tried a water based and a yacht varnish but still shows very badly,
Just wondered if you had any advice what else I could try.
Many thanks regards gary
What a wealth of information. Thank you very much. I will experiment.
Thanks for sharing those tips and the make!
Great video, Colin! Thanks for sharing your knowledge.
Colin, for ebonizing, I actually use Speedball Super Black India Ink. It works very well.
I recommend reading the Bob Flexner book "Understanding Wood Finishing" if you want to know finishes. It breaks many of the myths that still exist about finishes. For example, we can know what's in these finishes. Most of the information about what's in the products is published for chemical industry people but not woodworkers.
Always informative and helpful, thanks
what is varnish exactly? the term seems to be misused as both a specific and general term. what is in varnish? is shellac varnish or is it a type of varnish? confusing
Just a trick for mixing those finishing products in a can:
instead of just using a stick or wood leftover I prefer an old hand mixer which would be too weak for kitchen duty. Instead of throwing it away, re-use it to mix those wood finishers and then immediately clean the excess from the metal parts of the mixer. This would make a very well mixed product in a matter of seconds.
So helpful. 😊
👍👍👍Thanks
Can you expand on the Varnish you use for your own mix?
I have the same doubt
For an item that will be outside like a patio chair, would you stain, dye or paint it? Thank you!
I like to stick to cedar for outdoor stuff and don’t treat them at all. If I use anything else I tend to paint it or apply a Spar Urethane finish.
Thank you both. I’m very new to any type of woodworking. Appreciate you sharing your experience.
I'm not an expert but I built a cedar table and bench for our patio and used Minwax tongue oil. As needed I'll just add another coat to it. No sanding needed.
I consider the wood working community on Y/T to be priceless for beginners like myself. Almost any question will receive numerous suggestions. I hope to someday reach a level where I can offer help.
Thank you all !
@@bwhite661 that’s a good idea if you don’t want the cedar to do that natural weathered cedar look. Some people like it and some don’t.
By the look of all the finishes you showed and seeing they're all in dual language English/french I was wondering if you're from Canada?
The best product I've found to ebonize wood is black ink. A big bottle is sold by office supply places, and is inexpensive. The Speedball brand of India ink what I have used. It dries really fast and looks great.
What finish would you use on a new workbench. One has Baltic birch plywood, and the other has southern yellow pine. Again, both are new.
thanks
Ive been slapping everything with walnut danish oil.
Can you help me out, I'm regularly confused by the term, "varnish." What exactly did you add to the Danish oil? In addition, I also hear polyurethane referred to but rarely is it stated as water or oil based. I guess it's assumed to be oil based most of the time but with all the advances in water based products maybe that's wrong.
If I am correct, most "varnishes" are a hard film. Polyurethane for example.
Poly does come in water or oil-based versions. It should be clearly (although sometimes in small print) marked on the front of the label. From my personal experience, water based poly usually has a milky look until it cures.
I hope this helps, but I could be mistaken. "Stumpy Nubs" has some decent finish videos as well that might be worth taking a look at. Not that Colin does a bad job!
Putting black over blue (or mixing blue with black) does create a darker black. In Pantone color chart, it is called "process black".
Dyes are a helluva subject. I bought a Keda powder dye kit with the intent of using it to see if I could dye some wood purple. Well, it turns out that figuring out color mixtures is NOT intuitive AND the dyes are incredibly difficult to work with in terms of mess and staining stuff (eg, fingers!!!!!!!!!!!). I never got the color I wanted, BTW.
I read an article on black dye and they used India black ink and that is the best, pure black can’t see the difference between ebony and the dye. One application is enough
Suzy, Jonny, Michael, Georgi(Yorgos), being civilized kept sending cools tips, all others shut up and stayed in check. They had never seen wood before.
12:26 "because we purchase the Shit"
😭😭😭😭 wood polish is my big trouble.
He eats the same peanut butter I do.
Shellac and Tru oil are a good choice..