Car Fender repair rust & paint at home Diy
ฝัง
- เผยแพร่เมื่อ 22 ก.ย. 2017
- Just Launched the Website: mad-4-motors.com/
Step by step guide on how to repair rust at home with little cost.
East diy job you can do on your own car with great results!
How to paint your hood complete guide: • How to Paint Your Car ...
Products used:
Clearcoat aerosol- amzn.to/2ANeEUJ
Primer Aersosol- amzn.to/2DctNR7
Sandpaper assortment- amzn.to/2RSrcUg
Masking Tape- amzn.to/2RLsZuy
Tack cloth- amzn.to/2RK60jv
Body Filler Bondo amzn.to/2Mai48q
Bumper scuff damage I repaired and paint video here! • How to remove Paint Sc...
Facebook- / mad4motors
Disclaimer:
Due to factors beyond the control of Mad4Motors, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. Mad4Motors assumes no liability for any property or personal damage that may arise from doing a repair on your vehicle after watching any of my repair video's. Due to factors beyond the control of Mad4Motors, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Again Any injury, damage or loss that may result from improper use of tools, equipment, or the information contained in this video is the sole responsibility of the user and not Mad4Motors. - แนวปฏิบัติและการใช้ชีวิต
Bumper scuff damage paint and repair video here! th-cam.com/video/iamZLthlfG0/w-d-xo.html
Mad4Motors ive never seen a professional auto repair shop use csn spray paint .
I have rust on fender on my 2000 Chevy Astro what's the steps for me to do I sand it down. To the bare metal but in the middle it's soft a little but when I feel behind the fender it's no hole or nothing but it's under even now do I need Bondo or what I don't know never did this before
Mad4Motors do you need to buff it after it fully cures about 2-3 weeks....?
rattle can master, my buddy built a basic motorcycle based on a wide glide, he had about 6 grand in it. rattle can painted the tins with Wal Marts best. It was sharp. looked like a nice customized wide glide with an S & S motor. sold it for 12 k. thanks, some people make it look like brain science.
@@R-Mc 12m,
2
Having done the same type of repair, I would like to share some advice:
- Use an acidic rust neutralizer to get rid of the rust you couldn't sand off
- Use a zinc protector spray before applying the filler (the filler is full of water)
- Do not wet sand the body filler
- Do not sand down the whole part to clear coat it, try to keep the repainted area small
- After a week of so wet sand the whole piece with a 2000 sand paper then polish (the paint color will then be uniform)
Michael Henriks yes filler and water no good
Only thing i don't agree is not to wet sand the body filler...
Aaron Hudson water in the body filler will not only make the metal rust but also crack overtime. Your choice
I think that's what I did wrong when repairing rust spots in my 2010 F150. I sanded it down Bondo primed wet sanded to get smoother finish painted and clear coat. for someone who's not a profession that came out pretty well looking!!! until 6 months later rust start the show through! now it's about a year later and it's getting worse. I wasn't sure what I did wrong but now I think I do.
Michael Henriks. Hey thanks for your input. I'm getting ready to do some work and will definitely refer to your suggestions.
thank you my friend you've saved me a fortune !
I hope you're getting paid fairly by TH-cam, because you sir are a legend. Another brilliant video 😀
Good effort at home..But, you should remove all the rust first inside and outside ie remove the arch liner at least to do this.You have not removed any exterior parts and eventually the paint will flake from these areas.You have filled over the rust and have also used water over bare metal and filler that is porous.An acid etch before primer will also help to keep the rust at bay.
You did an fantastic job with the tools at hand and have given many people really good knowledge on what you did,keep up the good work .
So a tiny bit of rust, in the end you did the whole wing that will stand out like a sore thumb
This video saved me 900 quid. I done this sort of thing simular to my car. Ok it's not as good as this but it looks 90% better than it did before. Thanks so much
This is a great cheap and cheerful repair for a car that you are trying to get another year or two out of.
Great video man!!! I’m about to try that on a whole skid steer
Well done mate. Nice tips there and for the novice with a runabout this is more than fine!!
Good eddort
Intelligent overview of rust & paint job. Looking forward to more videos.
Rust treatment and primer prior to filler. Don’t use any water until you flat your final coat otherwise you risk trapping moisture and causing further corrosion. Don’t mask panel lines on the same plane - blend.
Great video for a quick temporary fix but a few things.
1. Always treat the bare metal with a rust inhibitor or zinc primer.
2. Your better of just spray the whole panel evenly with base coat to stop the blending showing through the laquer.
3. Once the laquer has hardened after 48hrs 1500grit wet and dry it till it's eggshell then bring back the shine with cutting compound & a polisher, it will come out like glass.
Good job mate. Thanks!
Definitely You tube is for people like you !!! Your video materials are helpful and very good.
YOU JUST SAVED MY LIFE THANKS! good job looks nice better than paying someone hundreds of $ to do it when you can do it yourself
Excellent video. You make it look easy
Good instruction. Thanks for sharing.
Thanks for video will be doing this to my fender.
Thank u for this video now im inspired to do my rust issues by my self
Gostei do serviço "reparos" , achei muito bem feito , parabéns ...
Me inscrevi no canal ....
The rust will be back sooner than later because it's not near gone. It's evened out, flattened and painted over. And the painting with both color and clear coat should be applied with large movements from off of the part and over it all and out again in a steady motion. Never small movements pressing and letting off the nozzle while directed onto what you're painting.
The big problem here is usually the back side of the rust since the pores usually goes right through. I have found motorcycle chain grease in spray to be quite good in sealing existing rust and keeping it from growing. The inside should be cleaned with a steel brush or something to get the bare metal/rust exposed. Then sprayed with grease. And after some while maybe a spray with a rust protector keeping the grease from drying or getting washed off.
Oh my gossssssh!!! That is sooooo amazzzzing!! I hope I can find the colour code to my Nissan. What a great job!!
Thanks for sharing! 😊
Boss accent! nice job, quick and easy.
Fantastic. Appreciate this excellent guide. Please can you tell me what grit flappy disc you used in the grinder?
What a beautiful job!!!
rust in peace
Vulkanudbrud Pro
countdown to extinction
Rust in piece... Polaris.
what a result , top , got a 2 inch knock on my wheel arch i think i tackle it after whatching this , thanks
Really enjoyed,will give it a bash myself thanks.
Rust and paint DIY with Connor mcgregor.
What a minty comment lmfao
😂😂😂😂
Conna Mccloud of the Clan Mcloud
2 nap és újra rozsdás le. Ez igazi taknyolás.
You can get a ready painted new wing/fender for £95 delivered here in the UK ( not sure how much that is in USD ) but to me it’s just not worth bothering by the time you’ve bought the paint/bondo etc you’ve spent half as much if not more than a new one
Nice job thanks for all the great tips
thx!
Hi mad4motors i decided to try a similar thing on my focus mk2, didnt come out as well as i thought, still yet to polish but hoping ive put enough clearcoat on, i couldnt get the original shape back but better than it looked before haha
Thank u , u did a great job 👏🏻👏🏻👍🏻👍🏻
Quick, tidy and thrifty job! 👍👍 Greetings from Oklahoma
thanks for the instructions
That's bright the rest of it needs done it's a 20year old car looks a different shade of gold on the wing probably needs a polish to fade it in but good job on the cheap cheers mate saved me a fortune but my wing's are coming off the car and inside the arch is getting done aswell to last as long as the out side then back on to finish the filler n paint n polish after with good quality polish with very very fine grit 😎😎😎
It’s awesome and really helpful
Bien trabajo amigo te felicito gracias x mostrarnos tu trabago
Desafortunadamente su trabajo no es corecto. Uno o dos meses y él tiene que hacer de nuevo
I’ve recently stumbled upon your videos. They’re bloody great. All the best from the UK
Great video, well done, good accent too
Nice job! Have done this in past, only problem even with the "rust stop" over rust within a month it will bubble from behind fender. Loosing battle, nice to do if selling car right after doing it.
True ideal if you selling or use the same process on a new fender
Very good teacher you are!!
Super cool. I'll try it in my car. Thank you!
am needing to do the same myself, that was the dogs, so many experts out there, but looks a fantastic fix to tide you over.
Do yourself a HUGE favor and forget what you just saw... There are plenty of good uploads (some are even by professional painters) showing the average guy how to get a nearly professional job at home with rattle cans, on a budget... This is NOT one of those videos.
Not trying to be a dick here, but it sucks to waste time and money if you don't have much of either. Good luck.
Thank you so much for this! You are so good at what you are doing! GODBLESS
PAPABLESS
conor mcgregor working as a mechanic now i see 🤣
He did pretty good I'm just going to half ass my shit to stop the rust from putting holes in my fenders then paint it with spray paint
How is this repair holding up. Great video!
incredible job- thanks
Bem que poderia ter a legenda kkkk mesmo em inglês, consegui entender e gostei do vídeo.
Nice video clear instructions
Hameed Khan terrible video
Looks beauty bud. Very nice video.
Thank you for sharing,I feel more confident cause my problem is somewhat what you are showing .
A golf which is 04 and you sprayed one panel nice wee 50 grades of gold
No body shop will warranty rust repairs. You can spend thousands and have the rust still come back...This is a good video for people who don't want to spend $$$ at a body shop and still have the rust come back. I've done that before and it sucks.
Great videos Mad4Motors 👍🏼
Exactly what I need to keep myself busy these days . Thank you sir .
Should’ve sanded the rust down a lot more and even some good metal. This rust will come back fairly soon
Yes was just thinking the same thing . Also on a rust repair like this , the inside of the wing would need treated and filled to stop it rusting from from behind as that did not look like just surface rust, A quick fix that, that is all it is. Would be good for about 2 weeks, especially here in the UK
@@mwc66 Did the same repair on my mercedes and after 3 years it still looks good and i do live in a country where they salt the roads like crazy
Yep, such a half assed job
So you guys watch this video for the only purpose to talk shit to this guys work?
@@lamuerte60106 no I watched the video because it’s satisfying to see it be done righr
Nice man!!!!
Good helpful video thanks
You make it look so easy but I can try on my car gotta touch up and area that got scraped against a pole above back passenger wheel well. My only issue is trying to find my cars colour match I got sand paper got the clear coat just need to find the base coat that matches
Good job 👍 I did the same great 👍 you do this so the rust won’t spread :)
Rust never sleeps
This video saved me a lot of money...thanks
@Mad4Motors how long did it hold? Thank you for your clear and informative videos.
What products did you use for stopping the future rust?
Thank you! Great overview of how to handle minor rust repairs.
Overall it looks really good. If you had spent a little more time those low spots on the seam could have filled.
Good job bro
Enjoyed that but is there any hope for a vw polo 56 wheel arch! ...wish be luck..cheers
Tenga su like, buen hombre.
Thanks connor
Make sure to seam seal the back or itll come right back and through
Great video for the diy projects, thank you!
you did a great job but i advice to use mastic resine it is verry strong and it doesnt break by the time go :)
👍goob job
Wheel arch rust comes from the back side. Washing the mud and salt from the inside lip of all the fenders frequently will prevent this kind of rust from even starting.
could you use a rust remover gel such as jenolite and normal sand paper instead of using a flat disc sander?
can you tell me, please what sizes did you use for the emery ?! I didn't remember very well from the video. I can also wipe it with kitchen towels if I don't have one.

rust remover/converter must be used before the filler
Nice!! I will paint my 2000 Camaro I don’t used so I’m going to practice!! And have ready to drive!!
👏👏👏 good job! I have a problem in my like that.... So, your video give corage to fix mine!!! 😁
You can do it!
Pěkná prasárnička. Vždyť ten blatník musel bejt orezlej i zevnitř. Za pár týdnů ta rez pěkně zase přeleze na ten venek.
Nagyon fasza lett.Most gyorsan add el mert pár nap mulva átüt újra a rozsda
Very good video. Thanks
nice werk mister!
use green fiberglass in the can its waterproof it will last longer than bondo but put the fiberglass first then bondo for the fine finish
Watching this video. I realised you're 'the flash'
You are very good I wouldn't complain for a home DIY job, if u didn't tell me your a DIY I'd think it's a professional job 👍
Love your videos, question: why would I use a grey primer?
You can see defects much easier with grey primer...mm
Going to do mi e over this weekend but need to find the same colour as my car transport cy green 🤔🤔
Thanks
Good work m8💪. Name the products you used please.
Sir im serious this video is so gUddd
Thank u sir..
Is it possible to get that wheel arch cut out and have a fabricated one welded in? Cuz mine is really bad
Very good!
That’s brutal!
Do you usually wait turdy minutes before sanding the filler.
nice job very clean
Thanks
Looks better than really good. It's a professional diy job,I'd a thought it went to a shop!
Thanks 😊