Just had engine replacement on my ‘04 645ci and 6/8 cylinders misfiring😢 doing my spark plugs tmrw, no more shade-tree mechanics, this video helps me a lot🙏🏽🙏🏽🙏🏽
Great video techniques; it's easy to see what you're doing. My only suggestion is to number the cylinders in your headers the same as they are numbered in firing order by BMW.
if you plan on reusing the old ignition coils and one of them is going out aka misfiring then you would have to test them one by one to find the one that is misfiring (you check them by disconnecting them one by one; if you unplug that bad one the engine will adjust and run better than with the bad coil connected
A code reader will name the cylinder # that is misfiring. My tip was geared to help those who have a code see how the cylinders are numbered. No need to check each coil until you find the bad one, if you have a code reader.
Thank you very much for this video; it gave me the confidence to tackle this job on my 2005 645ci. One new tip for Coil# 8 (back driver side): use a stubby wrench and slide into the coil handle to pop it loose. Waaay easier to get out. Also, I didn’t need anything but my fingers and less than 2 mins to push new coil in.
Hey bro do you have an email I can reach you by say if I still have a misfire I change my spark plugs coils everything in the sensor bank 1 why would I still be getting a misfire from 1 2 3 and 4 and I change the fuel injector one of them
Just had engine replacement on my ‘04 645ci and 6/8 cylinders misfiring😢 doing my spark plugs tmrw, no more shade-tree mechanics, this video helps me a lot🙏🏽🙏🏽🙏🏽
That engine seems like a nightmare to work on. I can only imagine doing the valve cover gaskets. Nice work.
Yea it was pretty annoying to get to the last corner spark plugs...
My korean brotha 🇰🇷 coming thru with a very clear tutorial. Ty sir
My brotha from another motha. Thanks for the love my guy
Great job, and all that work for just a couple of sparkplugs.
they are truly the ultimate driving machine when maintenance is kept
Thank you bro I'm going to change my spark plugs tomorrow morning i just need to know how to figure out how to get to those two in the back
Great video techniques; it's easy to see what you're doing. My only suggestion is to number the cylinders in your headers the same as they are numbered in firing order by BMW.
wrong it does not matter if and only when replacing with new ones..
if you plan on reusing the old ignition coils and one of them is going out aka misfiring then you would have to test them one by one to find the one that is misfiring (you check them by disconnecting them one by one; if you unplug that bad one the engine will adjust and run better than with the bad coil connected
A code reader will name the cylinder # that is misfiring. My tip was geared to help those who have a code see how the cylinders are numbered. No need to check each coil until you find the bad one, if you have a code reader.
What do you mean by numbering them because I’m putting brand new ignition coils in?
Thx. What is tge torque spec on 04 645cic?
I did evap purge on mine, same exact part as you hold. Wasnt hard at all
Luv the vid i just bought one when u start it and drive it boggs down then i let it warm up alil and it runs great is that a fouled out plugg??
What size socket?
Hello, how much torque or NM do i need to install the spark plug?
14lb
Knew id find this spec in comments😂, ty
I’m curious, what tool do you use on the 8th spark plug to reach the spark plug?
Watch from 4:46
Thank you very much for this video; it gave me the confidence to tackle this job on my 2005 645ci. One new tip for Coil# 8 (back driver side): use a stubby wrench and slide into the coil handle to pop it loose. Waaay easier to get out. Also, I didn’t need anything but my fingers and less than 2 mins to push new coil in.
Hey bro do you have an email I can reach you by say if I still have a misfire I change my spark plugs coils everything in the sensor bank 1 why would I still be getting a misfire from 1 2 3 and 4 and I change the fuel injector one of them
Check your fuel injector connection with the whole rail. Some of them pins could be stuck
What do you mean by torque to spec?
Usiang a Torque wrench. Tighten to specification as required.
I’m so annoyed. I just paid $1000 to change the spark plugs and coils. I should have done it myself ☹️
Stealerships!!!!!
after you started it, sounds like your gonna need some new pulleys soon.
Oh yes! I checked the pulleys the other day and they were okay but I need to replace the water pump :( Bearings are shot on that...
I found a good complete Gates pully/belt kit on Amazon.
Where are u bro??
Atl
I need help with my series 6 2005
How many ft pounds?
2:34 where can I get that jewish brand set? They look pretty solid
It is easier to change your car 🚗
Get me another car then.
@@HansGarage 🚗