Thank you, sir. I appreciate you still tuning in! You gave me some advice on videos not too long ago, I'm hoping to add some of those elements to the channel. I hope you are well!
We’ll darn, I noticed my floor in that same area by the little water drain is a little soft but I don’t want to rip it apart because it’s still a nice boat
I wouldn't do it if you're not ready to tackle the whole project. You can cut out the soft spot and fiberglass a new piece in, but it's still a process!
When removing top cap (after motor) remove rubber from boat rail then drill out all the rivets (there will be ALOT). I built a cradle onto my trailer and theres a guy in Arkansas youtube channel JMINK who did a similar project. Many prefer a lift to separate but I got a few neighbors and my loving wife to help and we managed to get it off and flipped over to set top cap on blocks. From that point I tore out the floor and used multitool to cut around edges... Transom is worth a look as its easier to replace here. I also used two 2x4s with slots cut with circular saw to set on top of hull to help prevent flex. Important note. Splash well will be fiberglassed to the interior of transom... With some elbow grease and a flat prybar you can wedge them apart.
I sent you some links (possibly better alternatives)... already with Outboards... lol (Check comments in your last video) You're going to need an 85 gallon Shop Vac Dude...!
I’ve been watching your videos and have enjoyed everyone of them. Thank you for the words of your ministry too!
Thank you! Where is your business located?
Excited to see the boat progress ! Wow also almost 2500 subscribers!! Praying for your congregation!
Thank you, sir. I appreciate you still tuning in! You gave me some advice on videos not too long ago, I'm hoping to add some of those elements to the channel. I hope you are well!
Good to see ya & hope all is well. Stay cool.
I will certainly try! Thank you for always checking in!
We’ll darn, I noticed my floor in that same area by the little water drain is a little soft but I don’t want to rip it apart because it’s still a nice boat
I wouldn't do it if you're not ready to tackle the whole project. You can cut out the soft spot and fiberglass a new piece in, but it's still a process!
I’m having withdrawals from knowing what’s become of this boat. 😂
Man, I’m going to get to it this month, I promise!! I miss working on the boats and making videos!
@@PastoralHomesteadOutdoors lol believe me I know the feeling, I bought a 1990 Nitro I’m doing the same to because of your videos
Where are you at in the progress of this boat
Ugh...pulling the motor off Friday after Thanksgiving! Thanks for sticking around!
When removing top cap (after motor) remove rubber from boat rail then drill out all the rivets (there will be ALOT). I built a cradle onto my trailer and theres a guy in Arkansas youtube channel JMINK who did a similar project. Many prefer a lift to separate but I got a few neighbors and my loving wife to help and we managed to get it off and flipped over to set top cap on blocks. From that point I tore out the floor and used multitool to cut around edges... Transom is worth a look as its easier to replace here. I also used two 2x4s with slots cut with circular saw to set on top of hull to help prevent flex. Important note. Splash well will be fiberglassed to the interior of transom... With some elbow grease and a flat prybar you can wedge them apart.
That's excellent advice! Thank you! I might reach out if I have any questions!
So you ended up scrapping this boat?
No sir, we have just fallen behind
@@PastoralHomesteadOutdoors no worries sir, looking forward to seeing it again some day!
I sent you some links (possibly better alternatives)... already with Outboards... lol (Check comments in your last video) You're going to need an 85 gallon Shop Vac Dude...!
Is that Ben Shapiro in the background? OFFS
I keep him around for special appearances. It's expensive but totally worth it!
I sent you an email to your hotmail account. Lemme here back from you.