Go-Devil Plastering by the professionals
ฝัง
- เผยแพร่เมื่อ 30 ก.ย. 2024
- Plastering by the professionals.
Two-coat stucco system, traditional repairs for DIYers.
Stucco thickness how thick can you apply it?
This work involves applying the stucco and leaving it alone so that you don't break the stucco packs. Usually, only advanced masters can do this on the same day. No, I'm not trying to toot my horn.
98 percent of all folks should apply a few coats on different days, or the dropouts out will be often.
For immediate bids, send pictures to Jay or myself at our sites below.
www.StuccoPlas... Kirk’s website.
www.GiordanoPl... Jason’s Website.
Hello, my DIY homeowners, young apprentices, and even seasoned journeymen plasterers.
Watch and learn how we stucco professionals show how to spread or apply back-to-back coats of stucco on the same day or simultaneously.
Key Tip, the stucco lath can’t be too tight. It must be attached normally so the stucco has something to grip.
We have no secrets in stucco applications, just learned common sense.
Oaky, since this wall is double the average stucco thickness.
For any stucco applied more than one inch, gravity dictates that gravity will do the rest if more than an inch is applied.
• Foundation repairs on ... How to apply stucco six inches thick.
So if you’re working around the other side of the house, we might hear that familiar sound, like cows craping on flat rocks.
Allow me to explain to all why this can not happen.
Common sense says the first coat should be accelerated stucco or sticky hot mud mix engineered to set fast. Now take the paper. The paper will assist me by sucking the moister out of the new plaster.
This action helps to set that all-important first coat.
With same-day stuccos, apply or trowel it on, then allow it to set. Don’t play with it or over-trowel it. Why? Perhaps many folks won’t understand.
If you continue to trowel or mess with it, you will “BREAK THE PACKS,” don’t do that!
Give the stucco at least 15 minutes to a half-hour before applying the next coat, or most will slide off.
So do not over-trowel any same-day cement materials.
This great truth is that 90 percent of even professional plasterers “Do not understand!”
Learn to know when to stop playing, troweling, and darbying the newly applied stucco.
Simply allow it to just set!
We make it look as natural as white rice. But the truth is you are not supposed to do what you witness in this video. For us, it’s just another day at the office.
I spread three cement coats, roughly about 5 to 7 wheel barrels of stucco, on this one stretch;
The key to achieving this is to have the correct number of accelerators in each wheel barrel of mud.
Did you folks know that when you apply the first coat, if it’s in the sun that heats up the paper, the paper absorbs the water from the stucco extremely fast, setting the first coat quickly.
The real question is how does one keep a shirt that white while working
Thats easy my friend, I have to wash my own clothes.💃
This is art in its truest form & this dude is a master.
Good evening Fwl my friend, you are too kind, thank you.
Bringing peace, love, and harmony to plastering
The complete plastering encyclopedia on video, by the plastering messengers of TH-cam
merry Christmas kirk jason and family and a great hoilday and safe one. all way from UK
No worries MC Handy Services from the Giordano services have a good holiday out in the UK.
best wishes,
Happy holidays from the Giordano clan
i never do any of this but I enjoy this vidios
Greetings You Tube Rafa, thank you, you may get to want to try your hand at stucco yet.
Cheers,
Happy holidays also from the Giordano family
Best wishes Kirk from the Netherlands
Howdy Warrior Dude from the Netherlands, thank you my warrior friend,
Cheers,
Happy holidays also from the Giordano family
Awesome Kirk,,from a 71 yo spread from the UK, PS,,started when I was 14,!,,warmest regards and respect from Dave, 👏🏻👏🏻👏🏻
Good evening Dave Dude, I like the fact you have a mere 51 years in plastering, but you plasterers from the UK make us USA plasterers, seem like sissies, as you guys work your arses off and love it, we hardly work and wine all over each other about stuff that don't amount to nothing.
Best wishes my plastering spring chicen UK pal.
Live long, and plaster
Plastering tips and techniques
I gotta say Kirk that if someone can't figure it out after
watching your episodes here online, they must have
their sound shut off in their head and have their eyes
glued shut too! Your videos are some of the best on the
job training videos I have ever seen!!
I've poured and finished a lot of concrete in my time,
but I have never done any plastering or stucco before
now! I really like your videos because I know I can use
them for a small job thst I'm doing! Thank you
Good evening Doug, I like your style, thank you, my friend.
Bringing peace, love, and harmony to plastering
The complete plastering encyclopedia on video, by the plastering messengers of TH-cam
plaster poet
@@hatzlmike1 🍻😉
Hi Kirk long time no speak I've missed your informative vids anyway hope your doing well and by the way you still have the best hair on TH-cam
Howdy my friend Lion eyes, thank you as this is humorous comment to start my day with.
best wishes
Happy holidays from the Giordano clan
Dude. We're do you get your shirts? Love it.
Good afternoon Phil, Salvation Arm, usually two bucks a shirt. Crazy paying big dough for work shirts.😉
Bringing peace, love, and brotherhood back to the old fashioned 🌎 “Plastering.”
The most comprehensive encyclopedia of plastering on video, by the plastering messengers of TH-cam.
Over 800 videos 🎭 👀💃
Wow, your knowledge and skill in what you do is truly amazing and a joy to watch, thanks for the vids
Howdy Alex , thank you
Live long and Plaster
plastering and teaching video’s
The stucco Samurai ! Kirk !
Thanks, buddy !
Wulfy
Good evening Wulf dude, I like your style, thank you.😉
Note: anyone with a question, type it into our Stucco/Plastering channel, and like magic, a video will appear to explain how it's done.
This feature is miles ahead of any plastering forum. 🥳
www.giordanoplastering.com/
Even though you're showing how to do it, it still takes time to master
I tried to do this by myself... never again, hardens to fast in South Carolina
Howdy Tatunka, it's really about mastering or knowledge of cement plasters, this is 70% of the trade, the other 30% is application.
I can choose cement plasters that sets in five minutes or 2 hours, it's about knowing which one will fit the need and the temperature that day, FYI, I do use accelerator and retardants depending on working in 30 to 100-degree weather.
May peace, love, and happiness, find you and yours, always
Kirk Giordano Plastering tips
@@StuccoPlastering You're the man , I'm watching your videos to learn the tricks of the trade. .... Fine tune myself.
Liberace ? hehe was he known to push hard ?
sorry brother, I don't understand this comment?
Thank you Kirk once again. May you be blessed during this time of year.
Howdy Robert dude, thank you
Live long and Plaster
Teaching the world how to plaster one Video at a time.
Not getting the message at all, THE MESSAGE IS: DO 1 THING AND DO IT WELL..FIND YOUR "THING" YOU LIKE TO DO AND KNOW IT FRONT TO BACK AND....BACK TO FRONT..
Exzackory. 🍾
Extremely great videos Kirk and family and friends 👍💪
Good evening El Wrencho, I sho-nuff like your style, Thank you.😉
Note: anyone with a question, type it into our Stucco/Plastering channel, and like magic, a video will appear to explain how it's done.
This feature is miles ahead of any plastering forum. 🥳
www.giordanoplastering.com/
Great job; good thick application of 2 coats so the stucco on top will look uniform and level.
Thank you.🕵🏼
Thanks for the video guys. Merry christmas to all of you from Adam in Sydney Australia.
Greeting Adam Edgar from Sydney Australia, thank you,
Cheers,
Happy holidays also from the Giordano family
Kirk you’r good at what you do. You’r also the best teacher of masonry, plastering, all included. No person will just go into you’r business. Only watching and listing to you is
never nearly enough. To have you’r years of experience and being talented you. This is,
no doubt, the magic we see. I love watching you ,and family do such beautiful work!
Howdy Joseph, you my friend have a wonderful way with words, thank you,
Cheers and have a good and healthy new year,
Kirk and Jason giordano
Howdy mr. Kirk! Saying biggest Hello from Russia) I like your possitive attitude, you are a happy man to do what you really love and good at, and have such a beautiful family in every way! Doing renovations and remodelings myself and enjoing it, that's the only way) My best wishes to you, sir, and to all Giordano family!
Morning Denis from Russia, thank you
Best wishes and have a happy and prosperous new year my friend.
kirk giordano plastering
Nice video. That's what I mean Kirk about the poor workmen ship of some tex cote applicators. Guys didn't even mark off that electric box. Gives guys like me a bad rep. I love my work. I take my time to do things right. As why I enjoy watching you good fellas work. I learn alot from ya. Keep up the good quality work. Shout out Jordano plastering from just been improved painting. 👍
Greetings Cesar Dude, thank you my friend, we do it right the first time or come back and do it right on our own time and dime.
Live long and plaster
Answers to life’s stucco and plastering questions
Merry Christmas Master Kirk !!!
Howdy DIS Vincennes, I like your style, you too have a great holiday.
best wishes,
Happy and safe holidays from the Giordano clan
I have a contractor and tells me he can do stucco over my wood siding on my house front wall within 3 days. ~400 sq ft. Is that possible?
That’s easy work dude let them do it
We can do it in one, so yes, of course it's possible. It depends on the size of a crew and their harmony.👨🏻🔬
Why is there a need for separate scratch and brown coats? Why can't you just put it on 3/4" thick in one coat?
Excellent question, It's more difficult than we make it look, (98 percent of all people can't do it as it takes so much time in, and one has to be an expert in applications and materials. Hence for over half a century, they say to apply one coat at t a time.👨🏻🔬
Love your videos man. Do you have any videos on how to do stucco bands? I love to see that, so i can do it at bome. Thanks for taking the time to make all this videos
Good evening Jorge, of course, we do, there's nothing in regards to stucco we have not shone how we do it.
Type in, how to install styrofoam, on our channel, then like magic at least two to five videos should appear that shows with explanation how we do it.
Welcoming, peace, love, and brotherhood, back into the 🌎 of Plastering.
Bringing you the most comprehensive encyclopedia of free plastering video’s ever put together,
by the plastering messengers of TH-cam.
Kirk and Jason Giordano with over 800 videos 🎭 👀💃
These guys produce great videos. I watched so many of them and ended up doing a small project in my front yard. Turned out great due the Giordano's sharing their knowledge.
@@jimh581 Evening Jim, thank you
I think its about time you brother Lou says something
COME ON LOU we met Kirks kids and wife, beautiful family by the way, now we want to hear about you a little more
Howdy Michele, I will ask luuu to say something, more than likely it will be " get that f#$%@k camera out of my face"
My brother Luuu, is the guy whos up at 5 am every morning cleaning the entire block for countless years, but hates being on camera, things that make you go hmmmm.
Live long and plaster
Sharing plastering information
hi, i hope your health is doing well. we live in sac. do you leave bay area for jobs? take care
Howdy Crocket dude, thank you, sometimes we do however Sac is close to a 2 hour drive these days with 24/7 traffic.
If we keep filling all the land, soon I will have no space to ride my horseie, kidding I don't really have a horse.
best wishes
Happy holidays from the Giordano clan
Have a good one guys dont drink too much :):)
Howdy Mac, too late,
chrees me fellow plasterer
Merry christmas and Happy holidays from all of us
the consistency of your mud is always so perfect. Im jealous..
Howdy, this is because my son, Jason is also a plastering contractor, but hod carries too, "mixes mud" when we do video's or my brother Luuuu, mixes, both have many years mixing all cementitious material's well.
This is the main reason I appear to be a very good plasterer. But then again I used to mix for a couple of years before plastering. one has to walk before he can run.
May peace, love, and happiness, find you and yours, always
Kirk Giordano Plastering tips
Merry Christmas from Australia Guys !!
Greetings Serge from the land down under,
Merry christmas to you and yours also and
Happy holidays from all of us
F#cking amazing skills!!! Thanks for sharing. True craftsmanship.
Evening Patrick, thank you, my friend.😏
Merry Xmas to entire Giordano family, from Italy!
Greetings Harles from Italy, thank you,
best wishes,
Merry christmas and Happy holidays from all of us too
The force is with you Kirk! Merry Christmas and a Happy New Year to you and your family bud.... Cheers!!
Greetings Junior Jones, thank you,
Cheers,
Happy holidays also from the Giordano family
Love your work ... God bless your company and your family
Good evening Jeramy, what a nice thing to say, thank you, my friend.
Note: anyone with a question, type it into our Stucco/Plastering channel, and like magic, a video will appear to explain how it's done.
This feature is miles ahead of any plastering forum. 🥳
www.giordanoplastering.com/
Guy never gets a drop on that white shirt.
Good evening Hector, If I do the lye from that stucco, eat's the shirt.
Kind of like battery acid. Thus I'm clean as a while, well, most of the time. 🍻
great video bud 👍 top man from a fellow spread from the UK 👍👍
Good evening rock and roll dude and my fellow plasterer.
Live long and plaster
Sharing the plastering knowledge
My parents got a quote for 65k, restucco. Can't afford it right now. I learned about artificial stucco but I'm a cook and this is new to me
Man, they must own a mansion. 😏
They must be older people and the contractors thought it would be nice to take advantage of them. Did you mean $6500.00?
just again I really love these videos you make thank you
Howdy equipment dude, you my friend are on fire with that comment, thank you.
Happy holidays and a merry christmas,
Cheers,
Kirk and Jason's Plastering tips
true plastering legend, talking and working at the same time. big fan from Israel
Good morning Hundi, my friend from Israel, LOL.
Personally talking while working is no different than joking to all the other guys while at the same time working, which we did thousands of times with every job, crew, and company that I've worked for.😉
Our unique plastering Tip: all subscribers or anyone who stumbles on our channel with a question, type it into our Stucco/Plastering channel, and like magic, a video will appear to explain how it's done.
This feature is miles ahead of any plastering forum. 🥳
Kirk & Jason Giordano Plastering
Free Palestine
The perfect video for doing 1 coat stucco, very thing I needed to know.
Thanks Kirk and crew you guys are awesome.
Howdy William, you can depend on us for sound advice.🕵🏼
Boy you do it the her a way.for so many years in the trade., I'm surprised. No wonder you come up with so many hollows. A swimming pool trawel.l Browning.
Good afternoon George dude, so you say, who are you what are your credentials? 🤔
no name or personal thumbnail, too frightened?😏
If there was an easier way to apply two inches of stucco I would know the answer and with many different and alternative ways to achieve it.
Thus, there is no easier way, except to perhaps leaving you for three days to prove me wrong, note the minutes on the clock as it was ticking.
There's re also no hollows except the area where your brain should be.
You're ignorant and don't even belive your own eyes.😉 FYI, get spell check since you can't spell well.
Kirk and Jason Giordano, together we have provided to all folks throughout the world the most complete plastering encyclopedia ever created online.
The plastering surgeons of TH-cam, with well over 850 'free' self-help videos 🎭 👀💃
Bringing peace, love, and brotherhood back into plastering.🏝🎆
www.nps.gov/tps/how-to-preserve/briefs/22-stucco.htm
George Nerren, if I were you I would fix that comment by taking it away. Learn your grammar before posting comments...and make sure you know what you're talking about while you're at it. But I'm just refrasing Kurt, he said it all already.
one thing they don't know is you make it look soo easy haha merry christmas guys thanks for the video enjoy your family and friends and take it easy :)
Howdy equipment dude, that's a fact as we did the other 3 sides of this before this video, this was the last wall, we paced ourselves to not be too beat up in case we were going to do this video,
Happy holidays and a merry christmas,
Cheers,
Kirk and Jason's Plastering tips
Guy looks somewhat like Skip Bayless lol
Good evening Julian, LOL, thank you, my friend.😉
Our unique plastering Tip: all subscribers or anyone who stumbles on our channel with a question, type it into our Stucco/Plastering channel, and like magic, a video will appear to explain how it's done.
This feature is miles ahead of any plastering forum. 🥳
www.stuccoPlastering.com
www.bayareastucco.com
Merry Christmas guys thanks for all the videos throughout the years
Howdy Isidro, no problemo, it has been our pleasure,
Merry christmas and Happy holidays from all of us
Boy you are great! Thanks for the tips.
Howdy Frank Dude, you're welcome,
Cheers,
Kirk giordano’s rendering tips
Merry Christmas Kirk!
Howdy Paintbrush dude, thank you my friend,
Cheers,
Happy holidays also from the Giordano family
You are good man 💪🏻💪🏻💪🏻💪🏻💪🏻💪🏻💪🏻💪🏻💪🏻💪🏻
Thank you, Antonio,
May peace, love, and happiness, find you and yours, always
Kirk Giordano Plastering tips
You are a good man kirk and a true craftsman.
Evening Dave Dude, your too good to me, captain. Cool hand Luke. th-cam.com/video/_WUyZXhLHMk/w-d-xo.html. 😀
Note: to all subscribers or anyone who stumbles on our channel with a question, type it into our Stucco/Plastering channel,
and like magic, a video will appear to explain how it's done.
This feature is miles ahead of any plastering forum. 🥳
This is so helpful to see. My siding is like this, top stucco is the old 70's speckled rock and glass-chips stucco, then wood on the bottom. I had the wood torn out. Now I have to fill in the bottom with stucco. The top I was told to pressure wash it before I add new mortar to cover it. Does it really matter? All the siding will be one fluent and smooth texture of stucco from top to bottom. I was told that the top and bottom will show a distinction with the old stucco on the top and the fresh stucco on the bottom because of the different absorption. I plan on painting all the siding white after it's all dried. Any thoughts or suggestions? I want this to go smoothly and this is in southern sunny Alberta Canada so here by September/October the temps will be from 20's Celciuls dropping down to 12 C on some cooler days by that time. Any thoughts or suggestions?
@@therenaissancewoman2080 Your guy is correct, stucco won’t adhere to any substrate that’s not clean enough to eat off. As far as it all blending in well, depends on who’s applying the stucco. We could blend it all in thus if we can others can too.
@@StuccoPlastering After pressure washing the old pebbly stucco, that was also painted over 18 years ago, can I use the Quikrete Concrete Bonding Adhesive? Will this be ok since there's old paint on the rocky stucco? I'm guessing a lot of the pressure washing will lift some of that old paint off.
@@therenaissancewoman2080 Pressure washing any panted surface will usually only remove 1 to 5 percent, the idea is to not only remove what is loose but to clean the surface so that the bonding agent adheres thus you new stucco will. Cheers
merry xmas kirk and crew from keys plastering ni
Howdy Mark me fellow plasterer, thank you,
Cheers,
Happy holidays also from the Giordano family
Kirk what brand and the item number is your back support.
Evening Robert dude, the link below is what I generally wear.
amzn.to/2l2mlh0
Live long, and plaster
Plastering tips and techniques
I had to get diffrent brand. It is working great. thank you Stucco on.
Good teachers
Thank you, my friend.🧑🏻🏫
Merry Christmas. All the best for 2017
Howdy Scott, same to you my brother,
enjoy the holidays and a merry christmas
Kirk and Jason's Plastering tips
Greetings from Mexico
Hola, my friend.💃
Merry Christmas to you too Joe Donald family
Greetings Luciano, thank you,
Cheers,
Happy holidays also from the Giordano family
Thank you for the video.
Good evening Summer breeze, no worries, we were having fun.
Note: to all subscribers or anyone who stumbles on our channel with a question, type it into our Stucco/Plastering channel,
and like magic, a video will appear to explain how it's done.
This feature is miles ahead of any plastering forum. 🥳
Kirk Giordano Plastering
Merry Christmas guys 🙌🏻🙌🏻🙌🏻🍻🍻
Howdy Luke thank you and may the force be with you,
best wishes,
Happy holidays also from the Giordano family
My very best wishes to you and your family.
Greetings Jock Dude, thank you my friend,
best wishes and a
Merry christmas and Happy holidays from all of us
Great to an artist craftsman at work, simply the best👍👍👍👍👍
Nice job Kirk!! Hello from Tj Baja!!
Good afternoon Mr. Lopez from Baja,
thank you,
wish I were in Baja!
Live long and plaster
teaching plastering video’s
Kirk Giordano plastering Inc. been watching you videos for at least a year now! I'm a swimming pool maker, any tips on pool plastering?? Thanks!! And best of wishes for you and your family!!
Good afternoon Lopez, I would advise what you already know, work your way out with a competent crew and use the trowels in the video below to save much time with joints and or trowel lines.
Live long and plaster
teaching plastering video’s
th-cam.com/video/X_SRyTIVMbU/w-d-xo.html
You wouldn’t get away with that finish in England or Great Britain we use hard floats only time you use sponge is to clean the edges
LOL, whats Bullocks meaning in the UK?
@@StuccoPlastering hard floats on sand and cement and hydro lime renders to a smooth finish that’s what Bullock means mr Giordano been a plasterer for over 30 years it’s called a smooth coat finish
And it’s mr Bullocks to you lol
A bullock is a Scottish name and it means young bull
@@paulbullock3831 Thanks for the tip.
Merry Christmas Giordano Family from sunny South Africa. Just want to say that I appreciate the videos. I have learnt tons of information. Kirk, love the way you present the video! Jason, well done on the video work. Take care and enjoy the day
Howdy Eric from South Africa, thank you my brother, Jason does do a good job with the video stuff, me I have to do the works anyway and can ramble while I work anyday.
Happy holidays and merry christmas, remember lad, leave the drinking to us professionals, thus avoiding the free matching handcuffs.
Kirk giordano Plastering
Love your videos learned a lot. I have a situation. A guy came over to do my stucco. He grind lots of lines in my stucco. He put caulking in between the cracks. he didn’t finish now I have lines all over my wall. How can I fix that? Thanks
Howdy, that's a mighty weird thing to do. You can pressure wash the home apply a bonding agent and apply a new color surface to it.
Hello there and HAPPY NEW YEAR!! I've purchased a house built circa 1910. aluminum over lap siding with plaster interior walls. some walls have bead board. several rooms have horizonal and/or vertical cracks. sine have cracks in the corners. how can I tell if this is a serious problem or normal cracks that just needs patching? I know this is hard without actually seeing it. maybe I could get a few pics or short video for you if needed. or you can tell me just hire a "professional" in my area. lol. Love your vids and looking forward to more. take care and GOD BLESS you and yours.
Howdy Jim, with interior cracks caulking is the best solution as these cracks are normal which indicates the home is flexing and moving a bit, completely normal.
Jason and I as well as the rest of our Giordano clan wish to thanks all of our subscribers and those who stumble on our videos a happy & prosperous new year.
Kirk Giordano’s Rendering how to video’s
all the best kirk and family love your vids i have learned heaps, HAPPY NEW 2017 from sydney AUSTRALIA.
Greetings Javier from Australia, thank you,
Cheers,
Happy holidays also from the Giordano family
Pretty impressive 👌.
Howdy Joseph, another day at the office, a fun day indeed. 😉
Bringing peace, love, and brotherhood back to the world of Plastering. 🌍
With over 850 educational and free TH-cam videos, by your favorite plaster geek,
🤓 and my son, Jason, the bearded plasterer.💃🧘🏻🧞♂️🎉
Good day, SR. Kirk, God gives you great health. Talking and working at the same time. That’s great. Thanks for your videos. Great work, great experience. Thanks, God bless you and your family and business.
Evening Ricardo, thank you, my friend; yes, God has blessed us in many ways. The best way was forcing us to climb the mountain no matter how many times we failed.😉
I always pray not for wealth but more guidance and knowledge.🤔
Note: to all subscribers or anyone who stumbles on our channel with a question, type it into our Stucco/Plastering channel,
and like magic, a video will appear to explain how it's done.
This feature is miles ahead of any plastering forum. 🥳
That was excellent, nice work, good conversation, and I really learned something….Thanksgiving is next (2021)
Happy thanksgiving 🦃 and Buon Natale
Evening Frangie, thank you, my friend.
Far away across the sea in sunny Italy, There's a quaint little town, Not a clock has been wound, For over a century.
They don't know the time or year, And no one seems to care, And this is the reason the Christmas season, Is celebrated all year.🥂
th-cam.com/video/hqOKOrOLL3A/w-d-xo.html/
I've been coming back and "liking" these videos I've watched before ... Lol , while binging in the past , I just forgot to !! 😁
Howdy Joe, you just keep coming back, we're here for you brother. 😉
merry xmas giordano family. think its awsome that you include your family. been plastering 20+ years and i always learn from your videos. thanx for sharing your knowledge and skill!
Howdy James my fellow plasterer, I could do my job without my family as you well know plastering is a team effort.
Happy holidays and a merry christmas,
Cheers,
Kirk and Jason's Plastering video's
Yesterdays old news papers , love when you said that , lol , Hi Kirk and family from the U.K .
Your videos are great mate , love watching them and thankyou for so much info and showing step by step how to approach a project .
Keep making them videos , the news may be yesterday but your skills are invaluable - wishing you and everyone a great 2024
Howdy Peet, man, I like you're style, thank you. All can depend on us for sound work and or advice.
Merry Christmas Kirk. I do this stuff all day everyday for 17 years and for some reason I love to watch these vids. Thank you for the pride and professionalism you exhibit and thank you for the pride you've instilled in me. Keep on keeping on and stay strong :)
Greetings Michael it's alway nice to here from me fellow plasters, especially from the guys who do this stuff day every day, tough thing to do all right as it's often dirty and physically challenging especially after we eat a huge lunch.
Cheers,
Happy holidays also from the Giordano family
Merry xmas brother videos r great
Greetings Carmen, thank you, we have fun making them,
Cheers,
Happy holidays also from the Giordano family
Thank you for posting the content, I learned a lot from you, a big hug from here in Brazil. God bless you.
My pleasure!👨🏼🎨
I tuned in about 6 months back after finding one if you caulking videos and have been addicted ever since! It's great to watch such skilled guys at work. Have a great Christmas and catch you in the new year 😃.
Howdy Fish Dude, you my friend are on fire with that comment, thank you,
Cheers,
Happy holidays also from the Giordano family
I remember your tip very well. I made the mistake of messing with it and could not get that cement to hold back up. It was perfect at first shot and I should have left it 5 minutes before coming back to it.
Howdy my friend, happens to the best of us, Happy new year.
Merry Christmas keep on trucking in 2017 clan Giordano . Learnt a lot from you guys cheers Martin .
Greetings Martin, thank you
Merry christmas and Happy holidays from all of us
You doing this so easy, like eating peace of pie 🥧
I got try on my house something somehow, but I'm afraid to start to mess up
Thank you for showing your skills
Good morning Pal Pal, it like anything takes practice.😉
why didn't you have them kill that circuit and unscrew the box from the wall to bring the conduit away from the wall ???
I didn't want them to have me arrested, which is a good reason for me. I wouldn't recommend to them either that they should start dating other couples either. I was hired to repair the stucco, that's all.😉
we love you guys
Howdy Duke Dude, thank you,
Live long and Plaster
Kirk's teaching video’s
Hi Kirk,
I just remove some sliding glass doors and framed a wall in its place. Problem is there is 1.5 inches from the plywood to the existing stucco wall. Can I use multiple layers of scratch coats to bring the thickness closer together before the brown and finish coat? Thanks!
Hi John, absolutely.😉
Thank to you and very important team have done my second stucco hear in milwaukee on my own now they turn out text book thanks what i was taught and your videos , i take thing seriously and study the materials like home work . Thank you please keep sharing if i can go visit you guys that would be of great inspiration. Great job with the camera .
Howdy Rafael , thank you, you my friend have a wonderful way with words
Live long and Plaster
plastering and teaching video’s
celtic vs rangers tomoz. hope your taking a break enjoying the old firm game.great vids kirk.
Howdy David, thank you
we're relaxing from work,
Cheers and happy holidays from the Giordano family
This is a great video and I learned a lot. I am ready to start it in my home. I couldn't get the same product (Rapid Set- Stucco Mix) here in Hollywood, Florida. Thanks for your teachings.
Hello, Google, "Plastering yards near me" for the materials.😉
Feliz navidad 🎄
Cool beans, Daddieo.👨🏻🏫
Love you guys! You've helped me so much and saved me a lot of money. Keep making these wonderful instructional videos. You're awesome!
Good evening Marilou Darling, thank you, Cheers.😏Our unique plastering Tip: all subscribers or anyone who stumbles on our channel with a question, type it into our Stucco/Plastering channel, and like magic, a video will appear to explain how it's done.
This feature is miles ahead of any plastering forum. 🥳
www.stuccoPlastering.com
Kirk you are a great dude and your videos are such a pleasure to watch. The Giordano family must be extremely proud. Hard to find pros like you these days. I wish you all the success in the world
Thank you, my friend.🕵🏼
Hey Kirk love your work brother can you buy this mortar here pre mixed is this basically a type S mortar your using
We used eisenwall for this wall, you can buy, "Rapid Set Stucco'" at home Depot, it's the same stuff only you just add water. With Eisenwall we add water and sand.👨🏻🔬
hey kirk can i put more than 1coat of dash finish on in a day or do i have to wait 24 hrs to apply a second or third dash coat . also, after applying bonding agent to a painted stucco area how long do i wait for the larsens bonding agent to dry before i can start applying a smooth coat to cover other peoples botched stucco match and also how long before i can start my dash after the smooth coat? i actually love doing this for customers and the results myself people love it when you can match botched stucco repair
Hi Johnny, as soon as a dash coat drys, you can apply another 50 if daylight allows. Most bonding agents take about ten to twenty minutes to dry.
love your vids -- but you might be able to work faster -- in uk they would but board under the wall with tin bath of plaster, and lift plaster up the wall from the bath (or large wood board), to save time - for interior plaster on brick - 1/2-1 inch base coat (thick brown) top coat (1/16 thin pink)
Good evening Manxman, my fellow plasterer from the UK. indeed there are many ways to skin a cat.
Welcoming, peace, love, and brotherhood, back into the 🌎 of Plastering.
Bringing you the most comprehensive encyclopedia of free plastering video’s ever put together,
by the plastering messengers of TH-cam.
Kirk and Jason Giordano with over 800 videos 🎭 👀💃
How would you repair a stucco finish that has been painted over the years and has shiners in it where paint and finish were scraped off in the past. It is a tudor style home with stucco inset between trims. I figure based on what I have watched,,,, remove loose stuff (there is not much), apply glue, apply skim coat of stucco 3/8" and use green trowel to finish? Can you give more detail dos and donts?
Take a grinder to it and scratch as much of the paint as possible.
If you do try it make sure you wet the area before applying the glue. You can also mix portland cement and water into a paint like consistency and brush it on. Just make sure you wet the area first. Or take a grinder and make little "X" marks throughout the area, not too deep just score it lightly.
It's June now and 4 yrs into the future but merry Christmas to you guys too!
Johnnny boy, things that make you go hmmmm
Kirk G you are the man! You have given the world a great gift of sharing your talent and knowledge and passion for quality plastering. I have spent may hours watching your videos and they gave me the confidence I needed to do some of my own stucco work. Not a big job but two brick piers in the front of the house so very visible. Well they turned out pretty good even after doing a hand thrown dash coat just like Uncle G. taught me. Thanks so much for your videos and your style. I love watching your channel. Nobody out there has the confidence and know-how to share what some would consider "trade secrets". Thanks again, YOU ROCK!
Howdy Surfer Dude, thank you for those kind words, my friend.
Bringing peace, love, and brotherhood back to the world of Plastering. 🌍
With over 850 educational and free TH-cam videos, by your favorite plaster geek,
🤓 and my son, Jason, the bearded plasterer.💃🧘🏻🧞♂️🎉
Some of your other videos suggest / show using Weld-Crete along the mated edges and the pre-existing stucco wall surface. Why not here?
Good afternoon Mark, we double lath the top, thus possibly avoiding a hairline crack. Plus, not all the bonding agents we use are blue. Some are white, which don't show when dry.
Such as Quikrete bonding agent I sometimes purchase when at home depot.
This video was about a three-coat same day system, not the double top lath or use of a bonding agent.
peace, love, and harmony to all
Sound Plastering tips for the DIY’er, apprentice plasterer or the Plastering experts
Thanks Kirk for sharing your 30 plus years of knowledge!!! Youll be rewarded one way or another for helping fellas out!! Good Luck!!
Good afternoon Ricky dude, you, my friend have a wonderful way of viewing life. Thank you.
Kirk and Jason Giordano, together we have provided to all folks throughout the world the most complete plastering encyclopedia ever created online.
The plastering surgeons of TH-cam, with well over 850 'free' self-help videos 🎭 👀💃
Bringing peace, love, and brotherhood back into plastering.🏝🎆
www.nps.gov/tps/how-to-preserve/briefs/22-stucco.htm
*Kirk looks like a Firefighter 🤣*
Good evening Im Dude, I take no office to this.
Bringing peace, love, and harmony to plastering
The complete plastering encyclopedia on video, by the plastering messengers of TH-cam
Kirk Giordano plastering Inc. *Im dude? Wow pure professionalism Giordayno dude*
he looks just like Tommy Gavin from Rescue Me
Luuuuuuuuueeeeeee
Evening Joel Dude, sounds like in the Movie, "Deliverance," starring, Bert Renolds.
Cheers, peace, harmony & happy holidays
Sound Plastering tips from your favorite stucco geeks
The best way to match The existing tex coat is spraying stucco with hopper sprayer
Evening Jesus Dude, I could have done it either way.
Cheers, peace, harmony & happy holidays
Sound Plastering tips from your favorite stucco geeks
Hey Kirk did you guys apply around the corner that day as well ? Or is it alright to stop a base cost application on a corner bead ?
Hi james, indeed we did go around a bout ten feet.🕵🏼