Gotta love how I found you cause I was having issues with a dodge transfer case years back and someone told me about this awesome walk thru of rebuilding it some lanky Canadian was doing and how it was worth the time to watch it done and explained properly. Now you’re building $100k race cars and project car budgets to match and doing missions to the Philippines. Great to see your growth brother.
"Inverted torx" is known as an etorx (external torx) and they're actually really good fasteners. The socket locks on so much better than a standard hex and they handle a fair bit of force.
This is great stuff and why I watch your channel. I have a 2003 Suburban and a 2007 1 ton Duramax pickup with an Allison transmission. I will refer to this to fix the seat in the Suburban.
Im not a gm man ive always been a dodge guy but i have always liked those style tow mirrors for gm trucks i think that style mirror looked alot better than any other full size gm mirrors. Id drive that truck too even tho im a dodge man
I'm pretty sure I wouldn't have tried removing that cover from the armrest. It just looks impossible so sliding it over would definitely be first choice
Speaking from experience, those exact side marker lights are a shot in the dark whether they'll last any amount of time at all. I wish I kept my old factory housings so I could just replace the bulb. I've gone through countless chinese side markers. I'm currently using a set that just clips in like the factory ones, because that black weatherseal adhesive is so hard to get off. I have a couple sets on hand just incase I need to replace another one.
Lmao I do the exact same thing on Freightliner cascadia rig seats on my own about 3 times a week. I saw the struggle I do at work. Just another day at work. Tomorrow I'll pull a Eaton trans
Why can’t they reinforce the outside of the drivers seats with some Kevlar or something? 🤣 that’s always the first spot to completely wear out and it just looks like shit.
Make sure when you do upholstery work to not wash your hands you want the dirtiest most oily hands possible so your hands glide easier over the new clean leather 😂
Goddamn I almost forgot penny candies were a thing. When we were kids we used to go to the local grocery store with change we'd dig out of the couch and grab a ton of candy. That definitely is not a thing anymore.
It may be clean but 30k for an almost 20 year old truck with a huge amount of mileage and a book value of like $2500.... You're gonna need someone with more money than brain...
I’m not the “comment-making” kinda guy. And I’m just guessing, but you strike me as the “not-reading comments” kinda guy… But… Are you aware of the recent developments of the “Thunderstorm Generator”? This appears to be the greatest breakthrough/release of a new technology since the IC engine. Or bigger. Seriously, Big things are coming. Combine this new tech to your hybrid system, and potentially zero emissions…Or close to it. And potentially self sustaining operation. If you don’t have guys in the shop Right Now working on a way to integrate it into the generator,…You’re missing out. I know, you’ve got your hands full merely developing the system as-is. But the very first thing your customers are gonna wanna do after buying your setup, is retrofit a Thunderstorm Generator to it. It’s inevitable. So you really oughta get on this. Even if it means you gotta subcontract it, or partner with someone who’ll build it as an add-on. If you aren’t conscious of this yet, please go investigate, and educate yourself. I’m no expert…No one is yet…But I’d recommend probably starting with this guy’s channel. He’s got the tech breakdown, open-sourced build plans, and proof-of-concept vids. It’s gonna change the game. th-cam.com/video/l6cxYnWTFi0/w-d-xo.htmlsi=lZtXJ3jh7pux1pO8
At the start you say alright boys, now you probably know whom you forgot and I would think they watch too. I am just messing with you, it is a slip maybe too much engine fumes has effected the brain, which you can use that for an excuse for those who were forgotten.
![Sprucing up the Mopar Woody Wagon! #HemiUnderWood [EP2]](http://i.ytimg.com/vi/vHmpDqzjHvw/mqdefault.jpg)
![Sprucing up the Mopar Woody Wagon! #HemiUnderWood [EP2]](/img/tr.png)
![[[OFFICIAL MV]] เอิ้นขวัญให้อ้าย- อ๊ะอาย สกุณาพร | ค่ายเพลงเป็นหนึ่ง](http://i.ytimg.com/vi/83x6L3X3qh0/mqdefault.jpg)
'05 GMC LLY Dually is for sale, only available through this link: geni.us/duallyforsale
Gotta love how I found you cause I was having issues with a dodge transfer case years back and someone told me about this awesome walk thru of rebuilding it some lanky Canadian was doing and how it was worth the time to watch it done and explained properly. Now you’re building $100k race cars and project car budgets to match and doing missions to the Philippines. Great to see your growth brother.
Thanks for sticking around Joshua!
@@DEBOSSGARAGEwhere is the v10 mustang
@@DEBOSSGARAGEwhere is the v10 mustang
Rich and Andy working together is so funny to watch. Love you guys.
❤
Best GM seat tutorial I’ve seen! No BS’ing around! Wish It would of came out before I did mine😂😂
Man this truck is a perfect example of a vehicle worth saving! ❤ I really like it, please post another one soon!
"Inverted torx" is known as an etorx (external torx) and they're actually really good fasteners. The socket locks on so much better than a standard hex and they handle a fair bit of force.
I assume you dont have a guy in town that covers chairs and seats? Nice to have a buddy who works from his garage at home.
LOOKED GREAT!!!
This is great stuff and why I watch your channel. I have a 2003 Suburban and a 2007 1 ton Duramax pickup with an Allison transmission. I will refer to this to fix the seat in the Suburban.
Yes . Sunday Funday with my Favorite Canadians !!!
Andy solo, wonderful. You are doing great Andy, very enjoyable. God bless and lots of love from Norway.
Andy ❤’s Norway!
I can’t tell you how pleased I am that I’m paying a shop to redo my drivers seat next week.
Worth every penny. :)
All that heavy breathing putting the slip cover on, and two sets of hands - didn't know it was that kind of video...lol. Looks great boys. Good job
Watching you and Andy put that back on was like cramming 10 lbs of crap in a 5 pound bag!!
Decent LED bulbs will work in both orientations, and if they stop working one way, flip the orientation and try it the other way.
You've never gone over the "everything wrong with an LLY"
Great job. Nice to see the care for the detail.
Im not a gm man ive always been a dodge guy but i have always liked those style tow mirrors for gm trucks i think that style mirror looked alot better than any other full size gm mirrors. Id drive that truck too even tho im a dodge man
That's 100% my dream truck I will find a perfect one soon enough
You’ll find it, they’re out there for sure. You might have to pay more then you’d like though
Your seat-foo is STRONG!!!
I really like the Andy farts around with trucks segments, he’s pretty entertaining 👍
❤
When you were doing the mirror wiring where you pryed the window switch panel off I was like “NO THERES A BOLT ON THE BACK”
I was searching for this comment. I was yelling no!!! Every cateye I’ve had has had this one screw broke off!
Summers coming and im really looking forward to see that LS boat on the water :)
If you guys could get Peter cullens (voice of Optimus prime) to do the commercial that would be amazing haha
Impressed you didn’t put any blood stains on the new seats!
I'm pretty sure I wouldn't have tried removing that cover from the armrest. It just looks impossible so sliding it over would definitely be first choice
Speaking from experience, those exact side marker lights are a shot in the dark whether they'll last any amount of time at all. I wish I kept my old factory housings so I could just replace the bulb. I've gone through countless chinese side markers. I'm currently using a set that just clips in like the factory ones, because that black weatherseal adhesive is so hard to get off. I have a couple sets on hand just incase I need to replace another one.
Good call on not doing the Edison kit to that truck. Looks to nice to ruin
This truck is so beautiful itd be doing it wrong if you put a edison kit in it. Those gen duramax chevs are awesome
Lmao I do the exact same thing on Freightliner cascadia rig seats on my own about 3 times a week. I saw the struggle I do at work. Just another day at work. Tomorrow I'll pull a Eaton trans
On a second gen Dodge the left and right bottoms are the same 👍👍
The mirrors i have seen used for over $400 back when I was looking for a replacement. I ended up repairing mine.
Be nice if work truck interiors were built with external screws. Making for easy removal/install, and quick fixes behind panels.
Gotta love the nubs for andys fingers
They only come in handy for jujitsu and seat repairs. Not ideal for thumb wars.
I absolutely Love the Dirty finger stain marks lol 😂 then you know you did the Job correctly.
I bought “take off “ seat upholstery from a company in NC that builds Wranglers . For my Jeep obviously
Mr Rich is there any greasing or lube of some type for the electric seat; while you have it exposed and out of the truck like that?
19:00 19:00
Nice truck. Would still be great to see it as a hybrid!
We already have other trucks rolling in!
Andys a great presenter
Didn't you promise to not flip this truck?
This must feel a bit like a kid getting to work in dad's shop solo for the first time lol.
Sorry does the transmission get replaced with a generator and front and rear electric motors on the diffs and no battery
You fawked up Andy. I would have replaced the cab brake light gasket as they suck and ruin your headliner when they leak like a cive
Looking clean!!!
Why can’t they reinforce the outside of the drivers seats with some Kevlar or something? 🤣 that’s always the first spot to completely wear out and it just looks like shit.
Is there Deboss Financing?. What's the interest rate?
Make sure when you do upholstery work to not wash your hands you want the dirtiest most oily hands possible so your hands glide easier over the new clean leather 😂
How does he drive these vehicles to Canada from the states? Wouldn’t he have to register them in Ontario to be “legal” before he drove them home?
I could see that selling for 50k plus here in australia
What’s the name of the truck. All those trucks had a name on the gauge cluster under the dash on a sticker
Thumbnail missed opportunity: Andy’s huge head sticking out the window.
Are there spacers on the rear wheels?
Yes, with those tires it needs at least 1 1/2" spacer so the tires don't touch each other
My least favorite thing on gm or duramax is the non level mirrors never understood it
Hah! I literally just finished watching part 1.
How long does it take to do a seat upholstery on average ?
an hour per seat
i should buy this thing, and bring it back home to texas. it was bought not too far from me.
Do it! I want to see it driving around E Texas again!
Will you be selling the lly core that you take out?
Sure, but you only have until the next time I go to V and R
Goddamn I almost forgot penny candies were a thing. When we were kids we used to go to the local grocery store with change we'd dig out of the couch and grab a ton of candy. That definitely is not a thing anymore.
Better to use a steam gun to loosen the glue to remove wrap
When u coming here in the Philippines
🥺
I love to see that country... I wouldn't want to leave tho... That would be hard
Seeing as the episode has already aired I'd say he's either still there or he's been and gone
What I hate about these trucks is that they didn’t have the 6 speed my lb7
Sense you like doing new things can you fix the ford escort so I can take my mum to her doctors apportionment ? We need reliable car.
Thats definately a really nice dually truck ❤
I get out there, work on it, I get dirty but my name is still Jake. When does it change to Rich?
👍
Rez rocket
If it doesn't have an Edison kit in it, did you really fix *everything* wrong with it? 😏
Guess not lol
I agree, the best thing you could do with a Chevy is delete all the Chevy driveline! Proper straight axle up front 👍
@@minnesotatomcat Delete all the cheap little motors for the hvac too
Wfo dana 60 kit
@@minnesotatomcat
Nothing like spending 50k on an Edison kit, just to put in a 10k truck
where is the v10 mustang
I get arm and finger sore just watching this vid,no wonder bolster specialist charge so much 🙃🙃🙃
Next week
i need that license plate
Yep mirrors $80 to 100bux each and thats hopefully working lol
😎👍
What happened to the Jack Black looking bloke?
Is used seat foam still available? $1k…. US or CAN? 😂
If you ain’t filthy you ain’t Rich!!!
so much breathing in one clip 😆😆
24000 YIKES
That's ~17660 American. Not bad...
definitely broke the door handle immediately, and those can't be fixed :(
Wish I had the money , great price tho . If someone has a 07-13 silverado 1500 8foot box for sale let me know iam in niagara region
Algorithm
You sold out even more. What's new?
I have a better plan for the truck why don’t you do a give away on that truck you have merch right and you will make way more money then selling it
It may be clean but 30k for an almost 20 year old truck with a huge amount of mileage and a book value of like $2500.... You're gonna need someone with more money than brain...
20k USD. Pre emissions, and super rare in our area
@@DEBOSSGARAGE Good luck selling this truck guys. I don't think its gonna sell for 24k CAD. But, if you do, good shit.
I’m not the “comment-making” kinda guy.
And I’m just guessing, but you strike me as the “not-reading comments” kinda guy… But…
Are you aware of the recent developments of the “Thunderstorm Generator”?
This appears to be the greatest breakthrough/release of a new technology since the IC engine. Or bigger.
Seriously, Big things are coming.
Combine this new tech to your hybrid system, and potentially zero emissions…Or close to it. And potentially self sustaining operation.
If you don’t have guys in the shop Right Now working on a way to integrate it into the generator,…You’re missing out.
I know, you’ve got your hands full merely developing the system as-is. But the very first thing your customers are gonna wanna do after buying your setup, is retrofit a Thunderstorm Generator to it. It’s inevitable.
So you really oughta get on this.
Even if it means you gotta subcontract it, or partner with someone who’ll build it as an add-on.
If you aren’t conscious of this yet, please go investigate, and educate yourself. I’m no expert…No one is yet…But I’d recommend probably starting with this guy’s channel. He’s got the tech breakdown, open-sourced build plans, and proof-of-concept vids.
It’s gonna change the game.
th-cam.com/video/l6cxYnWTFi0/w-d-xo.htmlsi=lZtXJ3jh7pux1pO8
Weird pivot to heavy breathing ASMR channel...
25:00 jesus those grunts and urghs are disturbing sounding without context. even with it's weird to listen to
Biggest problem, its a Duramax. An 8.1 would be far better.
And with that 8.1, get 3 mpg or 2 mpg towing?
At the start you say alright boys, now you probably know whom you forgot and I would think they watch too. I am just messing with you, it is a slip maybe too much engine fumes has effected the brain, which you can use that for an excuse for those who were forgotten.
Silicone on paint? the painters will scream at you! If you don't trust the parts, don't buy them!??
😎👍