I just ordered my ssg10, looks so friggin' exciting to work on and test with. Did I make the right choice in your opinion, to buy the ssg10 as my first sniper rifle? Thanks in advance. Great video!!
Do you have a sound meter to test the actual difference that the mods make? Digital cameras auto level sound so a loud gun and a quiet gun sound the same.
I dont unfortunately, its comparable to my srs with the sound, the pitch of the ssg is slightly higher than the srs so I can tell the srs still has the edge but still really good
It’s called a fart flap all you have to do it put tape over the the top where the hole is and then shoot the gun and it will make a whole in the tape and that’s it
Hey Lead Foot UK, I have the ringing problem in my SSg10, I have filled the trigger box with silacon grease twice. But, It goes down through the box and coats the trigger and after a while it rings again. Any tips
My SSG10 has the ringing noise after firing. Would it be the spring in the trigger box or would I have to do the "can" mod? Do you have a link to the "can" mod?
It is the spring in the trigger box, if you disassemble the rifle with the screws at the base of the gun, once you have the shell off there will be two more screws on the trigger, undo them and pull the trigger off and you can see the spring through a hole in the triggerbox, get some thick silicon lube and put some in and around the spring and that will stop the ringing. I haven't found the can mod to be as effective but I need to make video for the can mod I think so I will eventually get around to this as soon as I have the time :)
LeadFootUK, Something about the air brake pin. In this video: th-cam.com/video/jk40bBO8QlM/w-d-xo.html The guy does a test to see if the pin actually helps. He finds out using a DB counter that the average is about the same, if not higher. Looks like your pin has a little bit of a “placebo affect” on you? Really all thats happening is that your losing fps. Idk man, not a hater but I recommend you check the video out. Thanks for the video though its been a big help
Hmm how strange, comparing my ssg to my friends mine is way quieter his is short outer barrel with novritsch suppressor also but I've done the mods, very weird and I can do a fart flap mod video sure :)
@@LeadFootUK welp, first off a head on look might help viewers understand what you mean by wrapped around the guide. Allow us to see down the guide axially to see the can piece between the spring and guide. Does it get curled into a tight spiral around the OD of the guide and then flare the spiral to the ID of the spring or just a straight cylinder shape with a small overlap? Just a question and suggestion mate, no need to talk down when folks ask a Q bc they didn't catch what you're explaining. Least it came across that way :/
@@onepunchairsoft So sensitive Its really not that deep bro, it's just a case of cutting the can and wrapping it around the guide, the overlap of can should only be around 1mm which will allow just enough movement for the spring to slide over it without catching on the can, its alot of trial and error
@@LeadFootUK gotcha. I was really stuck on how it's reducing rattle but the guide has less distance to move axially with the can in between the guide and spring. I thought it was coiled and using tension to essentially keep the guide in the center of the spring but it sounds like its loosely wrapped and not tension spring coiled.
Can you explain me step by step how to do the fart flap? Thanks Already did the can mod and filled the stock with foam, also have the nov suppressor. I'm playing at 1 j limit but still my SR isn't as quietas yours
I see alot of people having this issue, It's a sort of normal fault on vsr-10s as the positioning of it is in the way, I remedied this by just removing the safety, there is a single Philips head screw holding it in just unscrew that and take off the spring and it will remove the safety. You can also but a plate that screws on to cover the hole left behind but it's not completely necessary if you don't mind the hole being there.
have you heard of the "SSG10 Over-Barrel Crazy Jet Suppressor" on Silo's website? it eliminates the need for a shorter barrel. was curios if it actually works
All suppressors work they just need a bit of playing with internally to make sure work more efficiently, I hadn't heard of it until now but It seems like a good idea I just don't understand why you wouldn't need a shorter outer barrel because you are still putting a suppressor on the end of your barrel so adding length to your long barrel.
Mine came pretty easy to be honest, there is a few method that you can do, but worth having a look in the ssg10 owners group on facebook and also searching on youtube as they will explain it better than I could over a message response :)
That's no problem, the double bell vsr10 is the same type of gun but has upgraded internals. So essentially your gun is how the ssg10 started life before they tinkered with it and upgraded all the parts inside it, I'm not 100% sure of the double bell model is compatible with all the upgrade parts that is made for the vsr10. The ssg10 is a Pre-Upgraded vsr10 basically
By rough estimates, how much do you think each category contributes to reducing the noise level of your gun? 1. short barrel+suppressor - ??% 2. fart flap - ??% 3. silicon in trigger box spring - ??% 4. monster can mod in spring guide - ??% 5. foam in stock - ??% I won't mention the air break pins since they've been debunked to not work.
1. 6% 2. 15% 3. 10% (but for your own benefit) 4. 5% (again own benefit) 5. 1% Mine and my friends ssg the same the only difference is the airbreak and mine is way quieter 🤷🏻♂️
LeadFootUK yeah I know, just saying I found they same in my srs. I also see on Novritsch website they try to make you not buy the air brake pins. You think a Sorbo pad would also help?
@@willieaway I think it all helps, even if it changes the pitch it helps as I say I can hear my friends shooting from 20m away but mine can just about be hear 10m
So if you get a large can, cut a rectangle the length of the spring guide then wrap it around the spring guide so it just overlaps then shove the spring over and it's good to go, cock the gun a few times and it will settle in position and solve the problem. If you also lube the spring in the trigger box as I show in the video that will stop the biggest twang noise you hear when shooting :)
Hey I am looking to buy an ssg10 but just a quick question; how much does the silencer actually help? Thanks Edit: Also with the ssg10 would the 2.2 joule spring with say 0.4 bbs be site legal (my closest site just says snipers at 500fps it is a bit unclear)
what order would you recommend doing these mods?? I'm not sure where to start, whether to change the outer barrel first or the inside components first...
Have you done anything to the bolt. Your boltpull sounds so smooth and silent, no grinding ore scratching. My SSG10 boltpull is so grinding and scratchy
I have lubed the trigger sear and all the bolt but other than that nothing, I hear that the hole on the cylinder is too tight on some peoples which causes the scratchy pull so needs sanding out slightly
Braedy for minecraft Good stuff yea my piston seems fine but the is little grooves in cylinder where the spring guide stopper god and I can’t get them to go away, did yours have that when you sanded it
Braedy for minecraft Good stuff yea I asked novritsch and he said the same thing but the grooves won’t go away maybe tougher grade sand paper would help of should I get a metal tool that will smooth it?
Thats 330 FPS with .45 gram which is equivalent to 460-470 fps with .20s that is also my limit here in the Northern part of the USA but I envy you! I think 2.8js or 550 with .20s is good for snipers lol
i fnd it weird that i run the exact build and everything and its shoot quieter then before but i dont even get the 2.3 joules its maybe hitting 1.69 joules i wish i could get it to 2.3 atleast but tried most things any tips on that?\
None at all as it doesn't hinder the travel any, the air that is generated from the piston covers the bb, as it flows through the barrel it pushes the flap open and then exists with the flap closing behind the bb when it is shot containing the noise, I have a double fart flap on my suppressor now and still no problems
@@LeadFootUK great thanks! looks like an easy mod to do for sure. I'm working on getting my ssg quiet right now too. I love these cheap easy mods with duct tape and coke cans haa! Thanks for the great vid. I'll probably make a video of mine too once I'm done modding. Modding is a deep rabbit hole once you get started!
@@ShotTactics I always get compliments on how quiet mine is and it's because I spend hours messing around with things and searching far and wide for random little techniques haha, the double fart flap is a good one I have internal and external flaps along with home made suppressor material :)
Every gun is different based on the mods. My vsr 10 has so many upgrade parts in it. And you need to know how to maintain and install those parts or else your gun will become useless. Your question has way to many factors.
Hey man, thanks for the tutorial. I'm not sure what I've done but when I put it back together and try to test fire after screwing back the trigger box it feels like its not bolting all the way back. Do you have any suggestion? Thanks
If you push the trigger box back in toward the front of the gun it should seat in flush to the receiver if you watch 13:08 onward I put the trigger box back in the gun, make sure the cylinder is in the gun also
@@LeadFootUK Thanks for the reply, Ive done the trigger box like the time stamp. However could you expand on how the cylinder should be out the gun? in you vid its already installed before you screw in the trigger box?
@@LeadFootUK okay yeah, ive tried this too like the vid, still won't bolt back all the way. Can you think of anything else it could be? I must be doing something wrong here ... Thanks
@@fabienthresher Could be your spring not cocking back all the way, take the cylinder out and check the spring/spring guide, have you got fps adjuster rings on the spring guide?
Nope just pushed it into the holes and then when you screw gun back together it squeezes it in there and doesn't come out anyways, you could if you wanted but not essential
I am not sure on the science behind it but the bigger they are the more sound they reduce the fps of the gun they all sound the same to me but you can notice the sound difference between one being on and not.
Yup, That is the setup I ran up until recently It actually works out better as the adapter works as a barrel spacer and holds the inner barrel centered. I only changed to a longer outer barrel as I had an accident with the shorter barrel and it broke. If you use a shorter outer barrel and standard long inner barrel you will need to run a suppressor as the barrel will stick out the end of the outer barrel.
@@LeadFootUK yeah that's my plan. I bought a 2nd hand ssg10 with the long barrel. I want to set it up as a run and gun platform. I use my hpa srs for hiding in a hole and being sneaky. Lol
@@grimmreaper5965 Its such a nice platform to just run and gun with, I've never ran mine with the long barrel, this weekend will be the first time so hopefully I don't mind the extra foot of barrel xD
![เปิดบ้าน พี่ตูน Bodyslam หลังใหม่คนแรก ที่ภูเก็ต l [Nickynachat]](http://i.ytimg.com/vi/flFwcmyDQSk/mqdefault.jpg)
The spring tip in the trigger box is something I havent heard anywhere else and its so useful thank you.
Fax it works asf
What is the sillicone used i dont fully understand
Amazing video, great quality, followed every step and everything worked beautifully.
It’s much more silent and nobody can hear me😁
Glad it worked well for you bud !
using this a year later and still amazing, i have yet to get the spring noise down but im going to try the silicone. Thanks Mate
Damn you're lucky. My bolt pull is absolutely disgusting and yours is buttery smooth
Yea my friends isn't same as mine either you need to try lubing the sear or filling the cylinder window down slightly
Great video bro :) I was too scared to take the trigger apart ;)
Please clean your room next time 🙏
Nah highfive ☻️🙏
Nice video bro, his helping a lot.
love that rifle paint job! perfect, just perfect.
me too but i love this barrel cuts and dont whant to not see them
Instead of silicon grease put some foam material into the spring of the trigger box!
Really?
Nah
Hi.
Your gun souds really good.
Ive the standard ssg10 and with the suppressor its too long.
Great tips,thanks💎👍
Very nice, thank you for making this video to help us!
very good video but you should to (1:30) put the old barrel earlier und make some kind of scenario
Fair enough, It would of been the exact same process as shown with a longer barrel is all
Awesome 😎 thanks a lot for doing the videos bro🙏
I forgot to ask what sort of foaming did you use to put inside your stock
I used foam that came in a pistol case :)
I have everything except for silencer and i can't get it quiet without one
I just ordered my ssg10, looks so friggin' exciting to work on and test with. Did I make the right choice in your opinion, to buy the ssg10 as my first sniper rifle?
Thanks in advance. Great video!!
After I used the can mod and lubed the spring on the trigger box It was way quieter but my hopup was like nonexistent
Very weird as neither of them touch the hop unit
What silicone are you using? tried looking for something to buy online but all I'm getting is caulk and super glue. Pretty sure those arent it
Do you have a sound meter to test the actual difference that the mods make? Digital cameras auto level sound so a loud gun and a quiet gun sound the same.
I dont unfortunately, its comparable to my srs with the sound, the pitch of the ssg is slightly higher than the srs so I can tell the srs still has the edge but still really good
You can download an app to measure and store peak DB on your mobile.
@@jay-kyleducati5811 if you want an inaccurate reading, sure
great video! Congrats
I got ~75db ssg10 with bb 10cm supressor and fart flap im pretty happy bout it
What is the mod that you have done to the end if the suppressor and how do you install it in depth?
It’s called a fart flap all you have to do it put tape over the the top where the hole is and then shoot the gun and it will make a whole in the tape and that’s it
Hello mate! I`m looking into the comments and i didn`t see anyone asking you what spring you use... can we tell us that? thank you!
In this one was a rapax 2j+ spring but my most recent one has the standard novritsch m150 :)
@@LeadFootUK Thank you!
Really nice video, thank you :)
I just put the short barrels on my ssg10 would realy like to see a vid on how to make the popcan mod
Cheers!
Keep forgetting to make the video! With my new ssg10 I ended up using heat shrink. I'll make a video on it either this week or next :)
I have uploaded the video now :)
Nice thank u, i'll watch it on my breakfast brake :)
Hey Lead Foot UK, I have the ringing problem in my SSg10, I have filled the trigger box with silacon grease twice. But, It goes down through the box and coats the trigger and after a while it rings again. Any tips
Thicker grease would solve that
My SSG10 has the ringing noise after firing. Would it be the spring in the trigger box or would I have to do the "can" mod? Do you have a link to the "can" mod?
It is the spring in the trigger box, if you disassemble the rifle with the screws at the base of the gun, once you have the shell off there will be two more screws on the trigger, undo them and pull the trigger off and you can see the spring through a hole in the triggerbox, get some thick silicon lube and put some in and around the spring and that will stop the ringing.
I haven't found the can mod to be as effective but I need to make video for the can mod I think so I will eventually get around to this as soon as I have the time :)
@@LeadFootUK Thank you!
LeadFootUK, Something about the air brake pin. In this video:
th-cam.com/video/jk40bBO8QlM/w-d-xo.html
The guy does a test to see if the pin actually helps. He finds out using a DB counter that the average is about the same, if not higher. Looks like your pin has a little bit of a “placebo affect” on you? Really all thats happening is that your losing fps. Idk man, not a hater but I recommend you check the video out. Thanks for the video though its been a big help
Also, a tutorial on how to make the fire flaps or whatever they are would be 🔥.
Hmm how strange, comparing my ssg to my friends mine is way quieter his is short outer barrel with novritsch suppressor also but I've done the mods, very weird and I can do a fart flap mod video sure :)
LeadFootUK cool! Fart flapp 😂.
What Ian said ^ 😬
On novritsch web site they don’t recommend air brake pins. But sell them because some people swear by them.
That monster can mod needs some more details. Im not sure what you mean wrap the can around the guide to eliminate the ringing
What further details do you need bud you just explained the extent of it there
@@LeadFootUK welp, first off a head on look might help viewers understand what you mean by wrapped around the guide. Allow us to see down the guide axially to see the can piece between the spring and guide.
Does it get curled into a tight spiral around the OD of the guide and then flare the spiral to the ID of the spring or just a straight cylinder shape with a small overlap?
Just a question and suggestion mate, no need to talk down when folks ask a Q bc they didn't catch what you're explaining. Least it came across that way :/
@@onepunchairsoft So sensitive Its really not that deep bro, it's just a case of cutting the can and wrapping it around the guide, the overlap of can should only be around 1mm which will allow just enough movement for the spring to slide over it without catching on the can, its alot of trial and error
@@LeadFootUK gotcha. I was really stuck on how it's reducing rattle but the guide has less distance to move axially with the can in between the guide and spring. I thought it was coiled and using tension to essentially keep the guide in the center of the spring but it sounds like its loosely wrapped and not tension spring coiled.
Can you explain me step by step how to do the fart flap? Thanks
Already did the can mod and filled the stock with foam, also have the nov suppressor. I'm playing at 1 j limit but still my SR isn't as quietas yours
U can just put tape on the end and shoot
Hallo :) How did you get rid of the scrubbing of the cylinder while charging?
Light sanding on the cylinder sorts it usually
How many fps did you lose with air brake
Do you know how many decibells this gun generates with all of the modifications. Thanks!
Hey i have a question... if i cock my ssg10 a2 the bolt handle hits my safety lever is this normal?
I see alot of people having this issue, It's a sort of normal fault on vsr-10s as the positioning of it is in the way, I remedied this by just removing the safety, there is a single Philips head screw holding it in just unscrew that and take off the spring and it will remove the safety.
You can also but a plate that screws on to cover the hole left behind but it's not completely necessary if you don't mind the hole being there.
you found warm water :D
Is this the same with ssg10 A3 model? (Short barrel)
What barrel do you have? What does that do to the fps? Are you using stick inner barrel?
In this build it was the standard inner barrel that came with the gun
Would like if you did a guide on the fart flap for the suppressor.
It's just camo duct tape over the end and then slice a cross pattern across the center
@@LeadFootUK alright thanks
Quality 👍🏽
Does the can mod sit flush against the inner source of the spring or against the spring guide?
have you heard of the "SSG10 Over-Barrel Crazy Jet Suppressor" on Silo's website? it eliminates the need for a shorter barrel. was curios if it actually works
All suppressors work they just need a bit of playing with internally to make sure work more efficiently, I hadn't heard of it until now but It seems like a good idea I just don't understand why you wouldn't need a shorter outer barrel because you are still putting a suppressor on the end of your barrel so adding length to your long barrel.
how do you make it pull back so easy???
Mine came pretty easy to be honest, there is a few method that you can do, but worth having a look in the ssg10 owners group on facebook and also searching on youtube as they will explain it better than I could over a message response :)
Im atill a noob in comes to airsoft. Im still starting and im staring with double bell VSR10. Is it the same with SSG10?
That's no problem, the double bell vsr10 is the same type of gun but has upgraded internals. So essentially your gun is how the ssg10 started life before they tinkered with it and upgraded all the parts inside it, I'm not 100% sure of the double bell model is compatible with all the upgrade parts that is made for the vsr10.
The ssg10 is a Pre-Upgraded vsr10 basically
@@LeadFootUK thank you sir.
Nice room
By rough estimates, how much do you think each category contributes to reducing the noise level of your gun?
1. short barrel+suppressor - ??%
2. fart flap - ??%
3. silicon in trigger box spring - ??%
4. monster can mod in spring guide - ??%
5. foam in stock - ??%
I won't mention the air break pins since they've been debunked to not work.
1. 6%
2. 15%
3. 10% (but for your own benefit)
4. 5% (again own benefit)
5. 1%
Mine and my friends ssg the same the only difference is the airbreak and mine is way quieter 🤷🏻♂️
I put air brake pins in my srs with a variable mass piston did not make a lick of difference to noise.
@@willieaway This is the ssg bud not the srs
LeadFootUK yeah I know, just saying I found they same in my srs. I also see on Novritsch website they try to make you not buy the air brake pins. You think a Sorbo pad would also help?
@@willieaway I think it all helps, even if it changes the pitch it helps as I say I can hear my friends shooting from 20m away but mine can just about be hear 10m
Do you have a parts list please. And where you got the parts from
What you recommend to buy 2.2 joules and upgrade or 2.8 and downgrade to get as close it possible to British limits. 500fps on 0.2
2.8j is 500fps on 0.2
How does the can mod work or like how do I really install it cus the twang noise I have in my gun is so annoying
So if you get a large can, cut a rectangle the length of the spring guide then wrap it around the spring guide so it just overlaps then shove the spring over and it's good to go, cock the gun a few times and it will settle in position and solve the problem.
If you also lube the spring in the trigger box as I show in the video that will stop the biggest twang noise you hear when shooting :)
Hey I am looking to buy an ssg10 but just a quick question; how much does the silencer actually help? Thanks
Edit: Also with the ssg10 would the 2.2 joule spring with say 0.4 bbs be site legal (my closest site just says snipers at 500fps it is a bit unclear)
2.2j is lower than 500fps so why would it be not allowed to game?
Which spring you using?
I have m150 with can mod & sorbo pad on piston head but need all 3 adjuster rings to even get 2.2j :(
Rapax 2j spring
what order would you recommend doing these mods?? I'm not sure where to start, whether to change the outer barrel first or the inside components first...
Easier to do them all at once so you don't have to take the gun apart as many times but it doesn't make to much difference
I'm torn between upgrading my ssg10 with the bolt system or the mancraft system.
I hear better things about the bolt that I do the mancraft
@@LeadFootUK which would explain why its 400
Have you done anything to the bolt.
Your boltpull sounds so smooth and silent, no grinding ore scratching.
My SSG10 boltpull is so grinding and scratchy
I have lubed the trigger sear and all the bolt but other than that nothing, I hear that the hole on the cylinder is too tight on some peoples which causes the scratchy pull so needs sanding out slightly
Christian Frigstad same with mine. I sanded the hole out and lubed it up and it’s still scratchy
Braedy for minecraft Good stuff I tried that but nothing works. How much do you have to sand because I did very little
Braedy for minecraft Good stuff yea my piston seems fine but the is little grooves in cylinder where the spring guide stopper god and I can’t get them to go away, did yours have that when you sanded it
Braedy for minecraft Good stuff yea I asked novritsch and he said the same thing but the grooves won’t go away maybe tougher grade sand paper would help of should I get a metal tool that will smooth it?
How is your bolt pull so smooth? Mine is very scratchy and I’ve shot like 1500 rds already
I had the same issue, can't remember where I seen it at, but if you lightly sand the cut out on the cylinder it will help a lot.
What kind of silicone inside trigger box?
Any that is thick would work
LeadFootUK i don’t know if you’ll ever see the comment i made so I’m responding so it’ll pop up in your inbox hopefully :)
Is this a1 or a2??
The A1
LeadFootUK thanks 🙏🏻
dam 330 fps, that's low for a sniper. In the usa it's 550 fps and that with the bb wight you shoot.
not in GA. here its like 550 fps with .25's at chrono
Thats 330 FPS with .45 gram which is equivalent to 460-470 fps with .20s that is also my limit here in the Northern part of the USA but I envy you! I think 2.8js or 550 with .20s
is good for snipers lol
What’s max effective range of this (hitting torso sized target with near 100% certainty)?
On 550fps around 80-85m
i fnd it weird that i run the exact build and everything and its shoot quieter then before but i dont even get the 2.3 joules its maybe hitting 1.69 joules i wish i could get it to 2.3 atleast but tried most things any tips on that?\
Have you tried with high spring?
@@dddavid132 i did and not running 2.3 i sold it and bought an Action army T10 convertered to HPA
Do you notice any fps loss from doing the fart flap?
None at all as it doesn't hinder the travel any, the air that is generated from the piston covers the bb, as it flows through the barrel it pushes the flap open and then exists with the flap closing behind the bb when it is shot containing the noise, I have a double fart flap on my suppressor now and still no problems
@@LeadFootUK great thanks! looks like an easy mod to do for sure. I'm working on getting my ssg quiet right now too. I love these cheap easy mods with duct tape and coke cans haa! Thanks for the great vid. I'll probably make a video of mine too once I'm done modding. Modding is a deep rabbit hole once you get started!
@@ShotTactics I always get compliments on how quiet mine is and it's because I spend hours messing around with things and searching far and wide for random little techniques haha, the double fart flap is a good one I have internal and external flaps along with home made suppressor material :)
What shoots better srs or ssg10 ?
Every gun is different based on the mods. My vsr 10 has so many upgrade parts in it. And you need to know how to maintain and install those parts or else your gun will become useless. Your question has way to many factors.
Hey man, thanks for the tutorial. I'm not sure what I've done but when I put it back together and try to test fire after screwing back the trigger box it feels like its not bolting all the way back. Do you have any suggestion? Thanks
If you push the trigger box back in toward the front of the gun it should seat in flush to the receiver if you watch 13:08 onward I put the trigger box back in the gun, make sure the cylinder is in the gun also
@@LeadFootUK Thanks for the reply, Ive done the trigger box like the time stamp. However could you expand on how the cylinder should be out the gun? in you vid its already installed before you screw in the trigger box?
@@fabienthresher My apologies what I mean was, make sure your cylinder is in the gun with the handle locked in down position as per in the video
@@LeadFootUK okay yeah, ive tried this too like the vid, still won't bolt back all the way. Can you think of anything else it could be? I must be doing something wrong here ... Thanks
@@fabienthresher Could be your spring not cocking back all the way, take the cylinder out and check the spring/spring guide, have you got fps adjuster rings on the spring guide?
How are you finding the SSG10? Im tempted to purchase an A1
Absolutely amazing, It's lightweight, you aim you shoot you hit, just a general pleasure to use, can't ask for more really ! :)
@@LeadFootUK Thank you!
@@ScorchMat No problem at all, enjoy :)
How much FPS are you getting with this setup?
I am getting 332 fps on .45g bbs
Did you glue the foam to the inside of your gun?
Nope just pushed it into the holes and then when you screw gun back together it squeezes it in there and doesn't come out anyways, you could if you wanted but not essential
@@LeadFootUK Alright thanks, ended up just putting it in there like you said, works great. Appreciate it
@@rad5207 No problem at all :D
What do airbrakes do?
I am not sure on the science behind it but the bigger they are the more sound they reduce the fps of the gun they all sound the same to me but you can notice the sound difference between one being on and not.
In my country Is 3,3j 😆
Great video, but for the love of god clean up your bloody room😂😂😂
Clean your room man!!!!!!!!!!!!!!!!!
Great video mate
Brilliant video thanks a million
the eöö
clean your room mate... wtf
Original comment
Will the adapter fit if you run a short outer barrel and a long inner barrel??
Yup, That is the setup I ran up until recently It actually works out better as the adapter works as a barrel spacer and holds the inner barrel centered. I only changed to a longer outer barrel as I had an accident with the shorter barrel and it broke.
If you use a shorter outer barrel and standard long inner barrel you will need to run a suppressor as the barrel will stick out the end of the outer barrel.
@@LeadFootUK yeah that's my plan. I bought a 2nd hand ssg10 with the long barrel. I want to set it up as a run and gun platform. I use my hpa srs for hiding in a hole and being sneaky. Lol
@@grimmreaper5965 Its such a nice platform to just run and gun with, I've never ran mine with the long barrel, this weekend will be the first time so hopefully I don't mind the extra foot of barrel xD