My shop line is just simple sweated household 3/4”;copper tubing. I put in 2 J Traps as water catchers just using common plumbing fittings. The diameter and copper help condense the water out well. I put it in back in 1999 and haven’t touched it as of 2019.
THANK YOU for all the GREAT tips. I have this gun and other guys are saying it isn't any good. I just got this gun and hope I will like it like you do.
@@gixerman01 what it means you can find in Holy Bible ;) And yes, nice of you to explain things about air volume, recently I learned about it too - few yrs ago ... Before that I always had problems when I wanted to spray paint with compressor ! Also with hose - about two years ago I got wide enough so my power tools can work now - it was stressful !!! I didnt know why nothing want to work, sure I tought it was my compressor because I have small one, 50 litar tank... With no big power or air volume flow but in the end when I change hose things start to work :) Sure it is not like in some shop or anything but I can finish my job.... Just I had to learn all on a hard way ! Now because of good and noble people like you others dont need to suffer... ;) Cheers dude !
I have been auto painting 260 years Bla Bla..anyway, I’m going to be using my new HF gun next week. My question is, should I purchase 1/2 x10’ or 1/2 x 25’ house? The compressor is close by where I’m painting so I was wondering if shorter was better
Good stuff. How do you select your pressures? From material being used, or gun specific? I have 2 guns, never used, and new air system, 3/8 hose with filter and regulator half way, and stedlin high flow couplers. Only 29gal tank though, but only painting a few parts for now. I didn’t get the purple, but did get the HF black widow hte gun for a clear, but I think it might suck cfms. Other gun is husky composite hvlp. Will spray sealer, base, and clear on Ecoated parts. Need pressures.
Thanks for the great info. Question: if im spraying a metallic/metal flakes should i keep the lil filter out the gun or leave it in? Its the famous harbor freight purple gun.
Great video!!! Thank you for making it! I'm borrowing a friend's Husky HVLP gun. It retails for $50.00. I'm going to buy a HVLP gun, which I'll use once a 2-3 time per month. Do you think the extra $35.00 is adding anything of value or would go for the $15.00 harbor freight HVLP gun? Thoughts? Again, great videos (the painting ones).
I bought a Coocheer paint sprayer recently. I'm planning on using it this week to paint some walls in an apartment. Do you know anything about it and is it any good? This one is electric and is not gravity fed. It siphons from the attached paint cup.
So.. Im trying to paint a 1969 Roadrunner (440 6BBL) Fiberglass hood. Seems Im mixing correctly, (1:41:4), have a quality Water/Oil filter in line and PSI guage. Setting to about 20/22 psi. Goes fine for 3-4 passes, then I'll get either water drops or might be "Clumps" of the Eurethane paint landing on my work! Now I AM using a 100' hose. @ 70/74°.. It's a thicker material, so using a 1.7 tip? Wonder if I should be using a 1.8 or 2mm tip? Very frustrating.😢 Any help be greatly appreciated! Thanks for the video!!
May be MY issue with the Clumpy Paint? 3/8" 100' hose. With SEM EURETHANE Mopar HotRod black hood paint (FOR a fiberglass hood)? Thanks for another great video! #semHotRodBlack #a12HoodPainting
Can using a 3/8" 100' hose REALLY be that much of an issue? Seems I'm getting a LOT of H20 dripping OUT OF the gun (Amazon 🙄). Im getting "Clumped" paint landing on my work! Help!! 🙏🏼🙏🏼
People knock Harbor Freight products because they are inexpensive and not 'Murican made. For the price, they are perfect to learn with. Why spend hundreds of dollars on something that if you end up not staying with it, or only need it a few times when you can spend between 15 and 30 bucks for something that works just fine? I've been using all kinds of crap from HF and have had zero issues with anything. Of course the stuff isn't really fheavy use, but if you're a hobbyist or don't do projects very often then they are perfect.
I guess it's worth mention. That a very reasonable solution is to get a LVLP gun. Opposite to HVLP guns they tend to be a lot less demanding on the compressor, etc. side of the problem! On the other hand for most people already stuck with their equipment. Without spending much, in fact rather cheap solutions. Is to increase the size of the hose, as mentioned on the video. And drill out the "limiting factors" of your assembly/installation. Be it a valve, fitting, etc. Sometimes a simple increase of 0.5mm on a limiting hole or valve. Can return quite interesting results for almost no cost! Worth considering. Cheers
SoooOOO glad I found your channel, you're the first one I've found that explains this step by step process in the simplest terms. Thanks for sharing your knowledge my friend!! 👍👍 Take care and God Bless. Jay.
I'm a 40 year auto body repair man I use 2 of the arbor freight gun 10.00 each 1 for clear 1 base coat 5 years love those guns I have had the most expensive guns don't like them this guy is right on thank you
A newbie to hvlp bought those $10 harbor freight guns good to know more expensive guns don't do anything more than a low dollar gun. Experience is the key is what I'm gettin' from what your layin' down.
The diameter of the hose is potentially the limiting factor if the hole supplying air (in the gun) is quarter inch. Take a look up the inside of your gun inlet. The smallest part is where your restriction will be. As long as your hose is bigger, or equal to the gun inlet (inside) you cannot improve on that with adding a bigger hose.
I cant thank you enough. Ive been using one of these at work, and couldnt work out why the gun was getting clogged. I pulled out that little plastic strainer, and it was chock full of residue. Much thanks
Thinking about buying the purple spray gun. My air hose is 3/8 on 10 gallon compressor. Using to paint Harley Davidson Fat Bob Tanks and Fenders. Paint is one step acrylic Urethane. I used a touch up gun with binks regulator at my work for painting various Aircraft interior parts and Cockpit with polyurethane and high speed lacquer. Retired now. Thanks for the video.
The bit about the larger fittings makes sense. If you have a larger hose but use a 1/4" fitting, you're bottlenecking at those fittings and kind of cancelling out the larger hose you spent extra cash on.
And not all hvlp guns use a lot of air. The cheap purple hvlp gun from harbor freight only uses 6 cfm at 40psi. A 1/4 air hose and fitting works just fine.
I'm a home hobby guy but was a professional metal body repairer in a truck shop. Been using those guns for a long time, I've found that the disposable cups work well, the caps snap on and usually don't leak, makes clean up easy. Thanks for the tips on air lines and fittings. HVLP was just coming on the scene when I retired.
When I was painting (not a pro) it was either Binks, DeVilbiss, or Sharpe. The first gun I bought, which I still have is an old Binks model 7 that I saved up for. I think you can't use that gun or those siphon feed guns in some places anymore. I remember when I bought it I had to change the nozzle because it came with a 'production' nozzle and it would push a ton of paint through there. Got a few of the cheapy HF HVLP guns and spot guns. In fact, about 18 years ago the HF near me had a special and was selling those guns for $10. I bought about 4 and still have 3 in the box. Not a bad gun. A lot of it is the painter and technique if you have a half-way decent gun. About 35 years ago when I was in the military I painted my car at the base hobby shop. Seen this Major paint his VW Golf and lay down one of the nicest paint jobs I've ever seen using a Taiwanese 'Buffalo' Tools brand knock off of the Binks 7.
Thank you for this video! im new to this Spray gun stuff. i definitely want to go with whats recommended. Can you share a link to the 1/2 hose and the right fittings you were talking about? please sir!
0 thanks for the truth about the air hose diameter size importance. It's just not something that I had considered because I'm not a professional. That's the good of these videos.
@@eddted2876 6-8inches distance and the speed is something you will have to get a feel for. Going a little quick on the first pass is ok because you can go back and put more on, going too slow will result in a run or sag. You can always put a little more on, but you can’t take it off. LOL good luck.
You gave me more information on hvlp on the pressure that no one does thankyou. How do you start setup of of air an fluid to begin setup before starting to spray !
Thank you, I will go get a 1/2 inch air line because the biggest volume air compressor I can afford is the 20 gallon Wen which is just 2hp and 5 SCFM at 40 psi.
For the money this little purple gun is great....just make sure you clean it out REALLY well at first and then after each job, run lacquer thinner through it to clean it. ;-)
I just bought this gun at Harbor Freight with a coupon. Super affordable price for what it is. Feels pretty durable too. I haven’t used it yet, but it looks promising. I’m not a professional painter, so I don’t need anything crazy expensive.
gixerman01 Thanks man! Your videos on this gun are super helpful by the way! I’ll be using it to paint some guitars that I’ve hand-made. Do you feel like this will be a good gun for painting electric guitars?
Thanks a bunch for your video it is very helpful ! Will look into a larger diameter air hose for more volume ! In addition I opened the bleed valve at the bottom on my tank which pushed moisture out of the holding tank with a drier in-line the air was perfect with a meter which measures water content ! Again many thanks !!!!
Talking about air hose diameter and performance. I noticed that my impact wrench worked better when I did not use the coiled plastic hose at the end. I believe the inner diameter of the hard (yellow) plastic coiled hose is 1/4 inch whereas the heavy rubber hose It was connected to was 3/8. The coiled hose was restricting air flow which diminished the performance of the impact wrench.
HVLP (high volume low pressure) means a high volume of material is displaced at a low pressure of air flow. This means that more of the paint propelled by the spray gun reaches the surface you are spraying with reduced wastage, overspray, and pollution of the air.Mar 5, 2018 High Volume Low Pressure (
I use all high flow fittings starting from the compressor down to my guns. I enlarged the hole on my gun regulator (with a 5/16 bit I believe) to increase air volume .. no moisture traps or anything else to restrict air works nice
I'm going to get this HF paint gun. I'm mostly just painting bike frames and parts. What is the cheapest/ smallest size air compressor that I would need to get?? Also new to paint guns, so wondering if you can paint at all angles with these, or if you have to hold them fairly level?
@@iamher6422 You painted a Benz with this gun? That is rad. What color? Was it a 3 or 6 gallon? How much solid spray time do you get before the compressor has to kick back on and refill it?
Marcus Prince it’s a high volume/ low pressure compressor. Even while it’s running, I still have same constant amount of PSI. Benz came out awesome. What’s your FB page. I can message you some pics
@@iamher6422 Its just under Marcus Prince, I am on a little bit of an Fb hiatus of sorts right now (infrequent use), but by all means, send them! I want to see exactly what compressor your using too. Is it 3 or 6 gall?
Thanks for tips. I guess I'll stick with my 1/2 inch hose. It cracked at connection, so I have to find a 1/2 inch barb to 1/2 or 3/8 NPT adaptor. The HF purple guns seem to be getting a lot of good press!
I bought a set of HVLP guns and the specs say; Operating PSI: 29-50 CFM: 3.5-7.1 I’m looking at a compressor with specs reading; CFM: 5.1 @ 90 PSI: 200 Gal: 27 Do I need that much compressor for a 50 psi gun??? Or should I just go with the other compressor option specs reading; (same psi 200) CFM: 4.0 @ 90 Gal: 20 I’m spraying leather seats with water based leather dye. A lot of dry time in between coats. Any help is appreciated!
The smaller air compressor will work if you’re spraying one seat at a time. If you’re spraying multiple at a time you might want to think about the larger one. Thanks for watching.
I heard that spraying at a higher pressure helps the paint lay better. What pressure do you recommend on this gun? I'm using a 3/8" inch line with 25' hose. Thanks for the info.
I bought my HF purple gun for $10...I picked up two at this price. First time spraying and my project turned out great. This little gun is well worth the price.
Why do I get a dull look on the outer edge of my touch up paint spots? I seem to have to paint it all at once or I get a dull rough edge on any touch up I do. Any thoughts?
That is your cut line. The reason this happens is your paint is not melting in on the old finish. This is common. Some times you can burn in the cut line by spraying a little solvent on the edges. It’s not easy to do I usually try to find a good breaking point to hide my start and stop points. Hope that helps.
AWESOME review dude. Really, no BS, no fluff, right to the point, clear and concise. Nobody trying to be funny or a comedian or telling us their life's story (as if they were movie stars we are interested in) Just a straight shot review, well done. THUMBS UP AND SUBSCRIBED !!
Thanks for this. I was really frustrated with my gun and was going to throw it away. But now, ill get a larger hose. Other videos dont even mention air hose.
The best video on these paint guns I've seen and the shortest one as well. Good job explaining!
My shop line is just simple sweated household 3/4”;copper tubing. I put in 2 J Traps as water catchers just using common plumbing fittings. The diameter and copper help condense the water out well. I put it in back in 1999 and haven’t touched it as of 2019.
Thanks for watching.
This guy knows his stuff. No BS. 🇺🇸
Thanks for watching.
THANK YOU for all the GREAT tips. I have this gun and other guys are saying it isn't any good. I just got this gun and hope I will like it like you do.
Thanks for watching
Thank you. Not using the Harbor Freight gun, but your advice applies for any HVLP gun. Really appreciate the advice & experience. 👊
The best air hose ive used is the red 3/8" Diablo also sold by Harbor freight
Great stuff! Thanks for casting your pearls amongst us swine. Greatly appreciate it.
Calvin Roberts LOL not sure what that means exactly. Thanks for watching.
@@gixerman01 what it means you can find in Holy Bible ;) And yes, nice of you to explain things about air volume, recently I learned about it too - few yrs ago ... Before that I always had problems when I wanted to spray paint with compressor ! Also with hose - about two years ago I got wide enough so my power tools can work now - it was stressful !!! I didnt know why nothing want to work, sure I tought it was my compressor because I have small one, 50 litar tank... With no big power or air volume flow but in the end when I change hose things start to work :) Sure it is not like in some shop or anything but I can finish my job.... Just I had to learn all on a hard way ! Now because of good and noble people like you others dont need to suffer... ;) Cheers dude !
Thanks for all tips that I’m good to use brother
Your Harbour Freight spray gun explanation is perfect for an absolute beginner like me. Your other harbour freight one is very good too. Thank you.
Thank you. Very helpful!
I have been auto painting 260 years Bla Bla..anyway, I’m going to be using my new HF gun next week. My question is, should I purchase 1/2 x10’ or 1/2 x 25’ house? The compressor is close by where I’m painting so I was wondering if shorter was better
Good stuff. How do you select your pressures? From material being used, or gun specific? I have 2 guns, never used, and new air system, 3/8 hose with filter and regulator half way, and stedlin high flow couplers. Only 29gal tank though, but only painting a few parts for now.
I didn’t get the purple, but did get the HF black widow hte gun for a clear, but I think it might suck cfms. Other gun is husky composite hvlp. Will spray sealer, base, and clear on Ecoated parts. Need pressures.
Thanks for the great info.
Question: if im spraying a metallic/metal flakes should i keep the lil filter out the gun or leave it in?
Its the famous harbor freight purple gun.
I take it out, but I run it thru a filter pouring it into the gun. Thanks for watching.
@@gixerman01 Yes....exactly!! ;-)
I like these guns too, but they get corroded inside, affecting their performance. I blow them out after a good cleaning. What am I doing wrong? 😕
It could be where it being stored. My shop stays pretty dry.
Great video!!! Thank you for making it! I'm borrowing a friend's Husky HVLP gun. It retails for $50.00. I'm going to buy a HVLP gun, which I'll use once a 2-3 time per month. Do you think the extra $35.00 is adding anything of value or would go for the $15.00 harbor freight HVLP gun? Thoughts? Again, great videos (the painting ones).
With coupon its 10 bucks and sprays great. Thanks for watching
Can you use it with deck stain???
I bought a Coocheer paint sprayer recently. I'm planning on using it this week to paint some walls in an apartment. Do you know anything about it and is it any good? This one is electric and is not gravity fed. It siphons from the attached paint cup.
Sorry Im not familiar with it.
I thought this was a tip for setting up the gun so it would spray nice ???
It is, thanks for watching!
Your explanation on the volume of my 1/4" hose was an 'Ah-ha' moment for my HVLP stuff. 3/8" ordered. Thanks!
So.. Im trying to paint a 1969 Roadrunner (440 6BBL) Fiberglass hood. Seems Im mixing correctly, (1:4 1:4), have a quality Water/Oil filter in line and PSI guage. Setting to about 20/22 psi. Goes fine for 3-4 passes, then I'll get either water drops or might be "Clumps" of the Eurethane paint landing on my work! Now I AM using a 100' hose. @ 70/74°.. It's a thicker material, so using a 1.7 tip? Wonder if I should be using a 1.8 or 2mm tip? Very frustrating.😢 Any help be greatly appreciated! Thanks for the video!!
May be MY issue with the Clumpy Paint? 3/8" 100' hose. With SEM EURETHANE Mopar HotRod black hood paint (FOR a fiberglass hood)?
Thanks for another great video!
#semHotRodBlack #a12HoodPainting
Can using a 3/8" 100' hose REALLY be that much of an issue? Seems I'm getting a LOT of H20 dripping OUT OF the gun (Amazon 🙄). Im getting "Clumped" paint landing on my work! Help!! 🙏🏼🙏🏼
for the metric ppl. 1/4 inch = 6.1 mm. 3/8 = 10 mm
People knock Harbor Freight products because they are inexpensive and not 'Murican made. For the price, they are perfect to learn with. Why spend hundreds of dollars on something that if you end up not staying with it, or only need it a few times when you can spend between 15 and 30 bucks for something that works just fine? I've been using all kinds of crap from HF and have had zero issues with anything. Of course the stuff isn't really fheavy use, but if you're a hobbyist or don't do projects very often then they are perfect.
I guess it's worth mention. That a very reasonable solution is to get a LVLP gun. Opposite to HVLP guns they tend to be a lot less demanding on the compressor, etc. side of the problem!
On the other hand for most people already stuck with their equipment. Without spending much, in fact rather cheap solutions. Is to increase the size of the hose, as mentioned on the video. And drill out the "limiting factors" of your assembly/installation. Be it a valve, fitting, etc. Sometimes a simple increase of 0.5mm on a limiting hole or valve. Can return quite interesting results for almost no cost! Worth considering.
Cheers
It's a talk not a video.
SoooOOO glad I found your channel, you're the first one I've found that explains this step by step process in the simplest terms. Thanks for sharing your knowledge my friend!! 👍👍
Take care and God Bless. Jay.
Thanks for watching
I'm a 40 year auto body repair man I use 2 of the arbor freight gun 10.00 each 1 for clear 1 base coat 5 years love those guns I have had the most expensive guns don't like them this guy is right on thank you
Thanks for watching.
A newbie to hvlp bought those $10 harbor freight guns good to know more expensive guns don't do anything more than a low dollar gun. Experience is the key is what I'm gettin' from what your layin' down.
The diameter of the hose is potentially the limiting factor if the hole supplying air (in the gun) is quarter inch. Take a look up the inside of your gun inlet. The smallest part is where your restriction will be. As long as your hose is bigger, or equal to the gun inlet (inside) you cannot improve on that with adding a bigger hose.
I cant thank you enough. Ive been using one of these at work, and couldnt work out why the gun was getting clogged. I pulled out that little plastic strainer, and it was chock full of residue. Much thanks
Thanks for watching.
Thinking about buying the purple spray gun. My air hose is 3/8 on 10 gallon compressor. Using to paint Harley Davidson Fat Bob Tanks and Fenders. Paint is one step acrylic Urethane. I used a touch up gun with binks regulator at my work for painting various Aircraft interior parts and Cockpit with polyurethane and high speed lacquer. Retired now. Thanks for the video.
Volume vs. pressure - excellent info!
The bit about the larger fittings makes sense. If you have a larger hose but use a 1/4" fitting, you're bottlenecking at those fittings and kind of cancelling out the larger hose you spent extra cash on.
And not all hvlp guns use a lot of air. The cheap purple hvlp gun from harbor freight only uses 6 cfm at 40psi. A 1/4 air hose and fitting works just fine.
I'm a home hobby guy but was a professional metal body repairer in a truck shop. Been using those guns for a long time, I've found that the disposable cups work well, the caps snap on and usually don't leak, makes clean up easy. Thanks for the tips on air lines and fittings. HVLP was just coming on the scene when I retired.
Thanks for watching
thanks for this, I am just starting out here.
When I was painting (not a pro) it was either Binks, DeVilbiss, or Sharpe. The first gun I bought, which I still have is an old Binks model 7 that I saved up for. I think you can't use that gun or those siphon feed guns in some places anymore. I remember when I bought it I had to change the nozzle because it came with a 'production' nozzle and it would push a ton of paint through there.
Got a few of the cheapy HF HVLP guns and spot guns. In fact, about 18 years ago the HF near me had a special and was selling those guns for $10. I bought about 4 and still have 3 in the box. Not a bad gun. A lot of it is the painter and technique if you have a half-way decent gun. About 35 years ago when I was in the military I painted my car at the base hobby shop. Seen this Major paint his VW Golf and lay down one of the nicest paint jobs I've ever seen using a Taiwanese 'Buffalo' Tools brand knock off of the Binks 7.
I never knew this information .. I have been struggling all along and finally someone show me the way amazing information
Thanks for watching.
Thank you for this video! im new to this Spray gun stuff. i definitely want to go with whats recommended. Can you share a link to the 1/2 hose and the right fittings you were talking about? please sir!
Well done buddy, thanks for educating me. Harbor Freight rules.
Thanks for watching.
Best straight forward video!
Thapnk you for the good tutorial
Extremely helpful been painting 35 years and your so correct on air hose
Why do HVLP guns come with 3/8" air couplers instead of 1/2"? It's very hard to set a system with 1/2". The guns aren't made for it.
Thanks for all the info! I was having trouble finding the "Ergo hose" that you recommended. How do you spell the brand name?
I'm using a 3/8" air line. I do have a new 1/2" air line but can't find fittings to connect to my compressor.
A ha 🤔 nice love it good explanation on the 3/8 or 1/2 air 👍Thank you
0 thanks for the truth about the air hose diameter size importance. It's just not something that I had considered because I'm not a professional. That's the good of these videos.
Rodriguez Dorothy Williams Anthony Taylor Karen
Not so detailed about how to completely use the spray gun ) adjustments! True about the wider hose to get better results!
I have a couple videos on paint guns and compressors. They might have the info your looking for.
@@gixerman01 what is the distance when u spray and is there a speed setting ? How to do that?!
@@eddted2876 6-8inches distance and the speed is something you will have to get a feel for. Going a little quick on the first pass is ok because you can go back and put more on, going too slow will result in a run or sag. You can always put a little more on, but you can’t take it off. LOL good luck.
You gave me more information on hvlp on the pressure that no one does thankyou. How do you start setup of of air an fluid to begin setup before starting to spray !
Thank you, I will go get a 1/2 inch air line because the biggest volume air compressor I can afford is the 20 gallon Wen which is just 2hp and 5 SCFM at 40 psi.
My purple spray gun got from Harbor Freight didn't come with the wrench to take front part off.
For the money this little purple gun is great....just make sure you clean it out REALLY well at first and then after each job, run lacquer thinner through it to clean it. ;-)
I just bought this gun at Harbor Freight with a coupon. Super affordable price for what it is. Feels pretty durable too. I haven’t used it yet, but it looks promising. I’m not a professional painter, so I don’t need anything crazy expensive.
Good luck, thanks for watching.
gixerman01 Thanks man! Your videos on this gun are super helpful by the way! I’ll be using it to paint some guitars that I’ve hand-made. Do you feel like this will be a good gun for painting electric guitars?
Jonathan Keith should do good for that. Similar material as used on cars. Good luck!
gixerman01 Thank you! I made sure to subscribe as well!
Can I go 1/4 line to my filter & 3/8 to my gun or should it be 3/8 completely
Thanks a bunch for your video
it is very helpful !
Will look into a larger diameter
air hose for more volume !
In addition I opened the bleed
valve at the bottom on my tank
which pushed moisture out of
the holding tank with a drier
in-line the air was perfect with a
meter which measures water
content !
Again many thanks !!!!
Thanks for watching.
my wife always said "The Bigger The Hose The Better"
i was use 1/4 hose thanks for the advice i switched to 3/8
Good
Talking about air hose diameter and performance. I noticed that my impact wrench worked better when I did not use the coiled plastic hose at the end. I believe the inner diameter of the hard (yellow) plastic coiled hose is 1/4 inch whereas the heavy rubber hose It was connected to was 3/8. The coiled hose was restricting air flow which diminished the performance of the impact wrench.
HVLP (high volume low pressure) means a high volume of material is displaced at a low pressure of air flow. This means that more of the paint propelled by the spray gun reaches the surface you are spraying with reduced wastage, overspray, and pollution of the air.Mar 5, 2018
High Volume Low Pressure (
Thanks for the info i its my hose thats too small ,thats why iv been getting bad results
What works best for thinning Lacquer ?
Lacquer thinner. Thanks for watching.
I use all high flow fittings starting from the compressor down to my guns. I enlarged the hole on my gun regulator (with a 5/16 bit I believe) to increase air volume .. no moisture traps or anything else to restrict air works nice
Hi, video comes on and your holding a filter, where is it installed when in the gun
I'm going to get this HF paint gun. I'm mostly just painting bike frames and parts. What is the cheapest/ smallest size air compressor that I would need to get?? Also new to paint guns, so wondering if you can paint at all angles with these, or if you have to hold them fairly level?
Marcus Prince I have one and I painted my Benz with it.. Car came out amazing and all I used was a pancake compressor. 🤷🏽♀️
@@iamher6422 You painted a Benz with this gun? That is rad. What color? Was it a 3 or 6 gallon? How much solid spray time do you get before the compressor has to kick back on and refill it?
Marcus Prince it’s a high volume/ low pressure compressor. Even while it’s running, I still have same constant amount of PSI. Benz came out awesome. What’s your FB page. I can message you some pics
@@iamher6422 Its just under Marcus Prince, I am on a little bit of an Fb hiatus of sorts right now (infrequent use), but by all means, send them! I want to see exactly what compressor your using too. Is it 3 or 6 gall?
I have a video that helps explain compressor size and what you need. Hope it helps thanks for watching.
I am a novice. Flush it with what!?!?!?! paint? water? air?
Thanks for honest analysis, I get what you're saying for the money not bad. Thanks Brother.
Have you tried SATA? If so, what are your thoughts?
Thanks for tips. I guess I'll stick with my 1/2 inch hose. It cracked at connection, so I have to find a 1/2 inch barb to 1/2 or 3/8 NPT adaptor. The HF purple guns seem to be getting a lot of good press!
Perez Karen Williams Elizabeth Taylor Barbara
Thanks! Bought one yesterday, never painted anything before. Tips are good lol
I did the same thing. How's it going for you?
If using a 1/4 inch fitting, may as well use 1/4 inch hose
Would you delute lacquer?
Harris Betty Miller Paul Harris David
I bought a set of HVLP guns and the specs say;
Operating PSI: 29-50
CFM: 3.5-7.1
I’m looking at a compressor with specs reading;
CFM: 5.1 @ 90
PSI: 200
Gal: 27
Do I need that much compressor for a 50 psi gun??? Or should I just go with the other compressor option specs reading; (same psi 200)
CFM: 4.0 @ 90
Gal: 20
I’m spraying leather seats with water based leather dye. A lot of dry time in between coats. Any help is appreciated!
The smaller air compressor will work if you’re spraying one seat at a time. If you’re spraying multiple at a time you might want to think about the larger one. Thanks for watching.
Where does the filter come from? Not shown in video.
I was going to put a dessicant filter in line at the gun, or would you recommend.just a final water separator?
I’ve had good luck with the little bulbs at the gun, but my compressor doesn’t blow much water. Thanks for watching.
I heard that spraying at a higher pressure helps the paint lay better. What pressure do you recommend on this gun? I'm using a 3/8" inch line with 25' hose. Thanks for the info.
I spray between 35-40 psi. Thicker material may require a little air to atomize. Thanks for watching.
Here's a tip..ive used it..the tip is..DONT USE IT..the fan is extremely difficult to wrangle. Stay away.
Any suggestions how this gun would work on luver doors
Thanks a lot. Great Video..! Great tips..! :)
The fitting I bought says HF for high flow works great has bigger hole in fitting
Can the harbor freight gun spray pearl and color shift paint with filter out and correct volume..
I should be able to do that. Thanks for watching.
Thank you now I just need to find out what paint I can spray out of this and how to thin it.
كم سعر كمرساسور الهواء واصل إلى لبنان
Thank you for the information I checked out DMC the Mercury outboard he did a great job on that motor thanks again 👍🏻
I bought my HF purple gun for $10...I picked up two at this price. First time spraying and my project turned out great. This little gun is well worth the price.
Have any tips for setup on the gun for use
why is nobody talking about the fluid spring getting hung up on threads inside causing adjustment to change mid stream?
I haven’t had that issue.
I just realized my air line is too narrow. damn! I did everything right and this ruined the results. Thanks a lot!
Please turn on captioning capabilities? I’m deaf. Thanks
Should work now. thanks for watching.
You can swap out that cheap plastic cup for an aluminum cup and end up with a pretty nice set up. The cup costs more than the gun, but is much better.
The 3m or devilbis disposable cup system would even be better.
What kind of pressure are you suppose to run with this gun or this type of gun? Thanks.
30-50 psi depending on viscosity and volume. 30-40 is best but thicker material may need the extra air to break up. Thanks for watching.
Will it be fine if I use 1/4 quick disconnect with 1/2 hose will is make a difference
The 1/4 inch quick disconnect is a restriction, but not as much as the 1/4 airline.
Why do I get a dull look on the outer edge of my touch up paint spots? I seem to have to paint it all at once or I get a dull rough edge on any touch up I do. Any thoughts?
That is your cut line. The reason this happens is your paint is not melting in on the old finish. This is common. Some times you can burn in the cut line by spraying a little solvent on the edges. It’s not easy to do I usually try to find a good breaking point to hide my start and stop points. Hope that helps.
AWESOME review dude. Really, no BS, no fluff, right to the point, clear and concise. Nobody trying to be funny or a comedian or telling us their life's story (as if they were movie stars we are interested in) Just a straight shot review, well done. THUMBS UP AND SUBSCRIBED !!
Thank you for the information 👍👍
HVLP or LVMP or HP
Does this mean the amount of air or the amount of materials?
It refers to the air.
People don't understand when you're a professional you can make anything work
Well most anything, LOL
its true if the equipment is at least half decent
on the other hand too if you use a 1000 dollars spray gun and you've never painted that gun worstless to you.
Thanks for this. I was really frustrated with my gun and was going to throw it away. But now, ill get a larger hose. Other videos dont even mention air hose.
Thanks for watching.