hi, to tighten lock on sheath place top of sheath in boiling water, at same time put a flat screw driver on locking bar and push. the bar will go about 90 degree keep in this position, and quickly put under cold tap, remove screw driver, dry sheath and belt loop in kitchen roll. now try the knife in sheath. good luck
I´m glad that I could help you with you´r decision. This is why I decided to begin to make these videos. I my self is very pleased with the S1 pro. Thank you for watching and I hope you will be as satisfied as I am with the knife. Take care!
Hi Mike, thank you for your honest opinion. I have seen many reviews on both F1, F1 pro. A1 and A1 pro. There seams to be very few comments - reviews on the S1, S1 pro. The blade size fits my kind of field use and planned projects. I look forward to giving it a try, and hopefully a long field life. Take care
I found a maker of waterproof boxes. They are called Liker Kayak and are made in China. Google Liker LKB-8002 and maybe you can start there and search for a box that you like.
I think the pommel would be good for smashing your car window in case of an accident. Otherwise perhaps you could hit someone as opposed to stabbing someone if you were attacked. Best to avoid killing people if possible 🐸
MaZEEZaM ....that pommel likely would not break a car window. If you have never tried to break the glass in a car, it is much more difficult than one would think. It takes a small pointed tip to make this job easier. And just to clarify something for reference to my comment, I am 6’-3” tall and weight 240lbs....so Im not a small guy. With that being said...the glass is hard to break 😂😂😂
Hi, I was referring to the A1 which is 6 mm and not the A1 Pro which is 7 mm. But thank you for noticing so I can be more specific if do another comparison. And thank you for watching.
you present so well that I bought one, thank you
hi, to tighten lock on sheath place top of sheath in boiling water, at same time put a flat screw driver on locking bar and push. the bar will go about 90 degree keep in this position, and quickly put under cold tap, remove screw driver, dry sheath and belt loop in kitchen roll. now try the knife in sheath. good luck
Have you tried it?
Like your review, I have been looking at this knife for some time. I'll go for one before the year is out. take care
I´m glad that I could help you with you´r decision. This is why I decided to begin to make these videos.
I my self is very pleased with the S1 pro.
Thank you for watching and I hope you will be as satisfied as I am with the knife.
Take care!
Hi Mike, thank you for your honest opinion. I have seen many reviews on both F1, F1 pro. A1 and A1 pro. There seams to be very few comments - reviews on the S1, S1 pro. The blade size fits my kind of field use and planned projects. I look forward to giving it a try, and hopefully a long field life. Take care
I really like the container it comes in, wish I could buy it separately.
I found a maker of waterproof boxes. They are called Liker Kayak and are made in China. Google Liker LKB-8002 and maybe you can start there and search for a box that you like.
Cheers :D
Male a kydex sheath it s the best way for good retention
Hi, what pants are on you here?
I think the pommel would be good for smashing your car window in case of an accident. Otherwise perhaps you could hit someone as opposed to stabbing someone if you were attacked. Best to avoid killing people if possible 🐸
MaZEEZaM ....that pommel likely would not break a car window. If you have never tried to break the glass in a car, it is much more difficult than one would think. It takes a small pointed tip to make this job easier. And just to clarify something for reference to my comment, I am 6’-3” tall and weight 240lbs....so Im not a small guy. With that being said...the glass is hard to break 😂😂😂
If you need to break a car window you might aswell use the blade. On such a rare occation dulling your knife is the least of your problems.
But a rubber around the shaet by the lock and it will hold much better
wow ! my A1 PRO don't fall like this.. mine need a very big swing to get out...
Hi, the A1 is 0.7 cm NOT 0.6.....apart from that your presentation is good... regards from a petty viewer..
Hi, I was referring to the A1 which is 6 mm and not the A1 Pro which is 7 mm.
But thank you for noticing so I can be more specific if do another comparison. And thank you for watching.
Wouldn't it be much more energy efficient to use a small axe?
Of course, I'm just testing the knife.
I have since found a knife can actually be much easier than an axe that has quite a heavy head on it. You live and learn :D
use a chainsaw.. even better.