Tip when trying to get the rubber bits through the little holes loop a piece of sewing tread round the rubber tip and pull though the hole so easy to do. 2:212:24
Goodnight excellent video, because it is shown with the camera on top of the drone, I've seen several videos, and only you and one other person stands out for their production, the eight video I saw, the guy marks the parts that will be removed, very cool. and just like yours, you can see it perfectly. Congratulations I'm from Brazil sao paulo
hit the tree last night. so an arm came off the middle body. wow a real breakdown I have to do and follow you. the foddering...ugh. big job. you did it
Great video, I followed step by step and it was very helpful, especially unclipping the delicate covers. Unfortunately something is wrong after the rebuild, the drone will not launch, and scrapes around in a half circle when the launch mode is activated. I have attempted to recalibrate everything but its still not working. Any idea what fault would cause this? Drone was flying fine before the rebuild, frame was replaced due to a break where one of the spring loaded arm pivots mount.
Thanks a lot. I did struggle a LOT to remove the glue on the front led cables! I actually cut the grey one when removing this f... glue. All the rest was super easy with patience.
I think i might have to get a middle frame. i have a crack and it dont seem to hold up with glue..... are these bodys made of abs or plastic ? what the best glue. i am a bit worried about having to do this strip down job.. i have had the top and the bottom off and replaced a broken arm.. but that been my limit so far.....
Con rapidez , seguridad y firmeza. Yo tengo que hacerlo y me da mucha pereza porque sé que tardaré y voy con la inseguridad que te da la falta de experiencia y práctica.
hank You. I' like to remove the arms and motors off my Dji mini se and send the rest up to 100K feet aboard a high altitude balloon. Will this disable control functions and recording to the sd card?
@@mr.hacking8100 i got some from aliexpress a lot of good parts from there and the mini and mini se seems to uses different parts like the top which the mini 2 has lights thanks for the reply!
Tip when trying to get the rubber bits through the little holes loop a piece of sewing tread round the rubber tip and pull though the hole so easy to do. 2:21 2:24
Thank you
Hmm... more work than I was expecting, but it doesn't look like anything that will give me trouble. Thanks for the video!
Goodnight excellent video, because it is shown with the camera on top of the drone, I've seen several videos, and only you and one other person stands out for their production, the eight video I saw, the guy marks the parts that will be removed, very cool. and just like yours, you can see it perfectly. Congratulations I'm from Brazil sao paulo
hit the tree last night. so an arm came off the middle body. wow a real breakdown I have to do and follow you. the foddering...ugh. big job. you did it
Great video, I followed step by step and it was very helpful, especially unclipping the delicate covers. Unfortunately something is wrong after the rebuild, the drone will not launch, and scrapes around in a half circle when the launch mode is activated. I have attempted to recalibrate everything but its still not working. Any idea what fault would cause this? Drone was flying fine before the rebuild, frame was replaced due to a break where one of the spring loaded arm pivots mount.
Thanks a lot. I did struggle a LOT to remove the glue on the front led cables! I actually cut the grey one when removing this f... glue. All the rest was super easy with patience.
Yes it very difficult and I also brake that front led too 😂😂😂
I’ve got a new led on order. I did exactly the same 😢😂. My soldering skill are shocking aswell. Good video. 👍👍
@@alwaysoutnumbered brake thing is Experiance, Brake more, more experience too😂
NICE VIDEO!! where did you buy the new middle frame? ;P
Great video, thanks!
Glad you liked it!
Thank you!
Great video for my mini 2 main frame replacement.
You're welcome!
Great video! subbed! may i know if the middle frame the same for dji Mini 2 and Dji mini 2 SE?
Is there any calibration or something required after chassis replacement? Or it will fly straight away?
Chassis not error, no need to calibrate anything
What is the best place to purchase the replacement body? Amazon or aliexpress or can I buy it directly from DJI?
It depends on where you are. If you in USA Amazon is the nearest but if you want cheaper price AliExpress is the best.
@@djiSolutions Thank you ! I never heard AliExpress
I think i might have to get a middle frame. i have a crack and it dont seem to hold up with glue..... are these bodys made of abs or plastic ? what the best glue. i am a bit worried about having to do this strip down job.. i have had the top and the bottom off and replaced a broken arm.. but that been my limit so far.....
If drone arm is broken, never and ever use glue, replace them because when you fly high and something go wrong. Your drone will gone.
Con rapidez , seguridad y firmeza. Yo tengo que hacerlo y me da mucha pereza porque sé que tardaré y voy con la inseguridad que te da la falta de experiencia y práctica.
Thank you ♥️
Thank you!
You're welcome!
Useful
Glad to hear that
hank You. I' like to remove the arms and motors off my Dji mini se and send the rest up to 100K feet aboard a high altitude balloon. Will this disable control functions and recording to the sd card?
Uh, why not just attach a gopro with a cheap iPhone with a data plan so you can use find my?
Or just send up an iPhone recording by itself at that point. It'll be better than the mini se camera
That would work, but I'm trying to take advantage of the 4 K camera and the stabilization of provided by the gimbal@@odder5154
anyone know where to get a middle shell for a mini 2 se?
I was just getting the one from Amazon, I think they use the same parts as the mini 2
@@mr.hacking8100 i got some from aliexpress a lot of good parts from there
and the mini and mini se seems to uses different parts like the top which the mini 2 has lights
thanks for the reply!
Is it the same for mini 2 se?
Same
@@djiSolutions do you have spare parts?
Sorry, I don't sell them
@@farhaanmaudarbocus8648I have spare parts, what u need?
Quick q, did you glue anything in?
You can glue cable connector if you want.
Does anyone know if a mini2 body replacement middle and top is compatible with mini SE
Yes, same same
Sir bodi कितना में मिलेगा मुजे bdalna हैं
Might try this. Someone shot my drone with a bb
Thanx for the video. I hate when they glue everything. fuck dji. First and last drone I buy from them
Way to fast and you skip some things!!
Sometime I forget to hit the record button 😂
Anyone with this issue, watch it at a slower playback speed.
Exellent