Thank you, I appreciate the love and encouragement. My wife is going to get Saint hood for putting up with me!! 😂😂 I wanted to do a channel that makes people laugh too because there are too many channels talking about stuff that just makes everyone mad.
The fact that the dogs were dancing when you were singing just made it that much cooler 🤣 also I love how you add in the figurines with the subscribe signs. Very creative!
Thank you so much for all the encouragement. The dogs mostly look at me funny when I am singing to them, they probably wonder why I sound like a cat in pain!! 😂😂😂
I’m still pretty new to your channel (came across you about 2 weeks ago), but I love your creativity, ideas, excitement, and humor. I work full time as a facilities manager. I have experience in carpentry, and have a great home workshop, and a lot of (cheap but effective) tools. I am in my late 40’s and am looking to supplement my income so my wife no longer has to work. I really believe your channel will help me accomplish that. Thanks for the great content!
Thank you brother, I appreciate the comment. I hope you can pull off the transition, I am trying to get my wife home as well. She can help you do all the mailing and stuff like that. My wife used to help me with most of the etsy stuff, even the staining and clearcoat. The only thing she didn't want to do was cutting the stuff out. Good luck and please keep me posted.
I wasn't too sure about you in the beginning but after watching you you like my favorite woodworking dude on here now I'm just into woodworking too and I can totally relate to you so keep doing what you're doing
That's ok, I'm still not sure about me!! 😂😂😂 I am honored that you would say I'm your favorite woodworker! just saying i am a woodworker is using the term loosely!!😂😂Thank you so much, I appreciate all the encouragement!
Thanks for sharing your story and experience, fascinating to watching your projects come to life. I’m just a woodworking fan. Your sound effects are bringing me laughter. ? Have you thought about making your napkin holders with an engraved letter in every letter of the abc’s ? Maybe accept preorders too ? Beautiful works of art. Much thanks ! 👍 👋
Thank you so much for the encouraging comment, I appreciate it. I actually downloaded some letter from etsy to use in the laser engraver. Ill post a picture when I make one. Thank you for the comment and the idea.
Thank you so much for the encouraging comment, I appreciate it. I actually downloaded some letter from etsy to use in the laser engraver. Ill post a picture when I make one. Thank you for the comment and the idea.
Oh is that to hold the backing in? That's a good idea, thanks for the tip. I have to get used to this thing so I can incorporate it into my work flow.!
Great video so thanks for all those tips. As for your farts🤣my wife told me once that when she went shopping with my daughter, i think it was Aldi, she said there was an old bloke a pensioner walking in front of them and suddenly he let off a loud fart that everyone in that aisle at the time looked around sniggering, the pensioner turns round and says "sorry, it's the prunes you know" and next minute everyone was laughing, and that fart you did in the dollar store sketch just reminded me of that story. Take Care. Barry (UK)
😂😂😂 Thank you for the comment and the story! It had me laughing so hard my wife asked me what I was laughing about so I read it to her too and we both got a laugh. I love the UK comments because I start to read them in my head with an accent. 😂
Man, thanks for the tip on measuring the frame, I have struggled to make a good fitting frame, gonna go try it today. One suggestion, I don’t have a diode laser but on mine I learned if you are doing a lot of writing I place my deck so the laser is out of focus a little further away than recommended and it darkens up the letter very nicely. Give it a try
Thanks for the comment, I am glad you found some value in the video. I heard that about putting the laser out of focus but I don't think I have a setting for that. I can just only adjust power and speed. I think I need to turn the power up maybe.
Wish X-Tool would help me out. It so expensive to start up a woodworking business I’m have way there with the tools I need. I’m buying 1 tool at a time. Can’t wait to get the X-Tool
Dude, on your narrow end table project wood; Use a Hand Plain (medium size) to plain down the edges or center of your pieces accordingly to make them flat, it will take all the gaps out. It is quick and easy, AND it will hone your skills and without the cost of a Plainer or Jointer which are many hundreds each. A good Hand Plain even today is about $30, less if you look around for a used one; on the internet or at garage sales. Practice on old wood, fence pickets, etc. Remember to always go WITH the grain, yes, you will have to learn how to read the wood, which ALL wood workers need to do. Also, make yourself a Shooting Board that will make a pro out of any beginner, they make perfect edges/board pieces in seconds. Make sure to keep all your Hand Plains sharp before use. Anything worth doing is worth doing right the first time.
I do have one hand plain that I got from Lowes. I think its a Kobalt. I have a hard time trying to figure out how to adjust it.😂 I have been wanting to get into hand planing but I have to make the jigs and figure out how to sharpen them and all that. Not that its all to hard or anything I just haven't had the time to learn it. Thank you for the advice and wisdom, I really appreciate it.
Daniel?!?! Whauda H£!! Are You Doing Here!?! Strange seeing you on another channel in the comments section besides your own!! The only thing stranger would be seeing you at my local Home Depot in TX! 🤔😉 LoL 😂 Love You Brother!! 🫡 ✌️
wow !!! I can't believe that you received a XTool CNC without even asking for one as a video blogger... I'm on a disability now unfortunately after an overweight patient stumbled and used my back and shoulder as a guardrail...long story short if an individual has the unfortunate incident of having to utilize the disability program....with what insurance and government payment (after the insurance company makes sure that they deduct what the government pays first) sorry guess it was a longer story...if you don't want to starve and stress 24/7 where payments, housing and meals will Materialized through air...you need to try something to supplement the income...so yup wanted one but can't afford $5000 to $9000 CDN for the gadgets...but hey LOVE your chanel and the fact you bring humor to the prodjects..I'm glad you received the "toy" you've wanted for years...can't wait to see what projects you make... Me I suggest something for your wife first....happy Wife happy life
Look at you big ballin' with the S1. That's the laser I wanted but since I'm not as cool as you I settled for the Ortur Laser Master 3 to start out with. 😂 I gotta know, did your wife really let you hang that in the bathroom? 🤣 Good stuff as usual. Keep it up.
You just have to make fart videos on TH-cam and they will send you one! 😂😂😂 No she didn't let me hang it in the bathroom. She's gotta get sainthood for putting up with me! 😂
@@jascogoods , hey, just a quick video idea for ya, on the cheap things that make good money front....I was making some wooden earrings on my laser last night and thought, hmm, I bet he could do a video on this. I took a $2 12x12 piece of 1/8" Birch plywood, stained it, and cut 18 pairs of earrings out of it. That comes out to about eleven cents per pair. The hooks and stain add maybe another $.40-.50 per pair. So, it costs maybe $9 to produce these 18 pairs of earrings, which I sell for $8/pair. 18 pairs of earrings at $8 per pair is $144. Pretty good profit margin. Anyway, just thought I would share that with ya. Do with it what you will.
Can you please make a video about how to set up an Etsy shop if you are brand new to Etsy? Could you include any tips or advice along the way during the setup process? Thanks
No Problem, I have it planned to make one of those videos in the future. If you need one sooner there are a ton of videos on TH-cam on how to set up an Etsy channel.
I think you were going to say hangs on the wall but it left out wall. I can do one of those. let me look into it and plan it out. thanks for the comment.
Thank you and thanks for commenting. I don't have a video for the phone holder I ran out of time for the video so I didn't do it. I will put it in a future video for you.
I was actually interested in those specific drillbits that you had. Do those happen to have flat spots ground for the stop collars? If you buy a larger size oak dowel that will get you contrasting wood and it will be a larger size so you can use the other drillbit. Of course, it means a trip to the store too.
the drill bits I have with the brad point do have a flat spot for a stop collar. I'm not sure about the regular bit, Ill have to look. Thanks for the tip on the oak dowel. I actually went last weekend and got a walnut dowel bigger than the one I used. I'm going to drill over the dowel I used about 1/4 of an inch deep and then use the walnut dowels. Thanks for the comment.
@@jascogoods do you happen to have a link or anything for those Bradpoint drillbits? I know everybody’s always trying to hawk their crap, but when people have good products, I like to support their channel when I can
I may be wrong but maybe your drill bit is either a metal one or has been blunted. Im still finding out about drill bits n Im a 66yr old granny new to basic woodworking so sorry if Im wrong what do I know 😅. Btw I love your videos😊
You may be right, I am never surprised when I hear about something new that's been around forever. It happens to me all the time.😂😂 Thank you so much for the comment and the encouragement.
I could be mistaken but the first bit sure looked like a Kreg pocket hole bit and the second was a concrete bit…Im pretty sure on the first and 90% sure on the second.
@@jascogoods didn't say plugs. If you screwed it together, I get it. But you used the dowel pins in the first one so I was just a bit confused. I get like that. Get the munchies too much
I don't know exactly what drill bits your using, but some bits will cut cleaner if you run them in reverse first. It scores the wood before the actual task.
Ill have to try that, thanks for the tip. Am I using the wrong kind? I just have a bunch of drill bits in a drawer that I pulled this out of so I'm not 100 % sure where this one came from.
@@jascogoods I don't think you are. I often prefer brad point bits because they don't wander. And the sharper they are, the faster they dig in. especially on soft woods. I have a basket full of various bits I've collected over the years next to my drill. I probably need to sort them one day. I say "one day" because that's probably how long it'll take. LoL! Thanks again for a great video. Always keep me thinking.
I'm very limited on what I can purchase. I have a set of dewalt bits. One thing I noticed is anything over 3/8ths it's just tares every thing up, slow speep/high speed regardless. Forstner bits work a little better. But still has tare out. Flip/flop, tape / backing board just don't get it.
@@MrTrecutter1 I understand your frustration. I have some cheap bits too, and as I mentioned to Jascogoods, I sometimes run the bits in reverse. On a drill press, that means I have to physically turn the bit backwards. This cuts the top fibers of wood, making a score line of sorts, and then run the bit normal. Don't cut all the way through and then repeat the process. Yes, it can be time consuming, but it does prevent tear out. Also, and I'm not complaining, I'm a 100% Disabled Vet, so I too am on a limited income. I have purchase many quality tools, bits, and blades from garage sales, flea markets, and pawn shops. So there are options to get quality items at a lower price. I hope this helps and God bless.
Can you show me how you market and sell items? Because that is what's it all about...... you can make, but if not properly marketing it means nothing..... please share....
Doesn’t matter how old you are, farts are just funny. Don’t know if your x-tool will let you but try backing off the laser spacing so it’s out of focus and it will darken the lettering. I have a co2 and it works great for me,
My wife is still waiting for me to grow up!! 😂😂 I will have to try the backing off thing. This is the first stuff I've done with this thing. I am excited to learn more and figure it out. Thank you for the comment and the tip.
I haven't listed them on Etsy yet. I was just showing products that are already selling on etsy and how to make simple projects and then make them more valuable with personalization.
@@jascogoods thanks for the response. id love to be able to sell on etsy. Its just so saturated. seems like anyone that can get wood is selling woodcraft on etsy.
I really want a cnc too!. You can really batch out a lot of projects with one of those. There's a video on TH-cam about a woodworker that made a ton of money making these wallet / watch/ side table trays and selling them on Etsy. he used a cnc to make a bunch at once. You could probably look through Etsy for ideas of what people are making with them.
Way too many fart jokes in 1 video. Was like someone telling a joke, then telling it 10 more times to the same people at the same party, during the same conversation. Great video, and the gag was funny the first time- just not the next 9
honestly we need to talk about labor not the cheapest materials we got. it's not good talk: 1 dolar piece of wood and scraps of scraps... what about thousands of dollars invested in tools? so it's worth to be paid for what you've been done even with one dollar piece of ... whatever
Thanks for sharing your story and experience, fascinating to watching your projects come to life. I’m just a woodworking fan. Your sound effects are bringing me laughter. ? Have you thought about making your napkin holders with an engraved letter in every letter of the abc’s ? Maybe accept preorders too ? Beautiful works of art. Much thanks ! 👍 👋
Thank you so much for the encouraging comment, I appreciate it. I actually downloaded some letter from etsy to use in the laser engraver. Ill post a picture when I make one. Thank you for the comment and the idea.
Thanks for sharing your story and experience, fascinating to watching your projects come to life. I’m just a woodworking fan. Your sound effects are bringing me laughter. ? Have you thought about making your napkin holders with an engraved letter in every letter of the abc’s ? Maybe accept preorders too ? Beautiful works of art. Much thanks ! 👍 👋 Your thoughtful items are very beautiful. 👍👍
Thank you so much for the encouraging comment, I appreciate it. I actually downloaded some letter from etsy to use in the laser engraver. Ill post a picture when I make one. Thank you for the comment and the idea.
![BOWKYLION - วิงวอน (ex-change) [Official MV]](http://i.ytimg.com/vi/cLdnZWDaO-w/mqdefault.jpg)
Your wife is a champ 😂. I love the interaction and humor you add in. Humor is almost illegal these days so I appreciate it.
Thank you, I appreciate the love and encouragement. My wife is going to get Saint hood for putting up with me!! 😂😂 I wanted to do a channel that makes people laugh too because there are too many channels talking about stuff that just makes everyone mad.
The fact that the dogs were dancing when you were singing just made it that much cooler 🤣 also I love how you add in the figurines with the subscribe signs. Very creative!
Thank you so much for all the encouragement. The dogs mostly look at me funny when I am singing to them, they probably wonder why I sound like a cat in pain!! 😂😂😂
I came for the woodworking info & keep coming back for the personality & humor. 😂❤
Thank you, you are too kind!! I appreciate you!!
Hey you won me over with the dog concert!! It's all about our dogs!!!
Thanks brother!! I agree, I love my dogs!!
In hospital right now for minor op, so making most of U Tube. So happy I found your channel, best I have watched for ages. Dave 🇦🇺
good luck on you op. i am glad you found my channel! I hope everything went well.
Thank you! Love the dowel stabilization.. I like how you detail and then research.. Kudos to Amber for putting up with your shenanigans!😂💙
Love your humor and woodworking projects
Thank you, I really appreciate that!!
I’m still pretty new to your channel (came across you about 2 weeks ago), but I love your creativity, ideas, excitement, and humor. I work full time as a facilities manager. I have experience in carpentry, and have a great home workshop, and a lot of (cheap but effective) tools. I am in my late 40’s and am looking to supplement my income so my wife no longer has to work. I really believe your channel will help me accomplish that. Thanks for the great content!
Thank you brother, I appreciate the comment. I hope you can pull off the transition, I am trying to get my wife home as well. She can help you do all the mailing and stuff like that. My wife used to help me with most of the etsy stuff, even the staining and clearcoat. The only thing she didn't want to do was cutting the stuff out. Good luck and please keep me posted.
You got humor.... you got future😁😆😅❤
Thanks brother I appreciate that! I hope its true!😂😂😂
I've never watched any of your videos without laughing 😃.
😂😂😂 I try to keep them funny.
Love the concert and shoutout to Bearded viking, ❤ ya both rock!
Thank you, I appreciate the encouragement. My dogs really don't like the concert, they just look really confused!😂😂😂
I wasn't too sure about you in the beginning but after watching you you like my favorite woodworking dude on here now I'm just into woodworking too and I can totally relate to you so keep doing what you're doing
That's ok, I'm still not sure about me!! 😂😂😂 I am honored that you would say I'm your favorite woodworker! just saying i am a woodworker is using the term loosely!!😂😂Thank you so much, I appreciate all the encouragement!
I am new here and just subscribed! I like your videos, your ideas and your humour! 😂You are very kind, honest and generous! Thank you for sharing!
Thank you, I really appreciate the comment, the subscription and most of all the kind words. It makes it worth it to make these videos!
Thanks for sharing your story and experience, fascinating to watching your projects come to life. I’m just a woodworking fan. Your sound effects are bringing me laughter. ? Have you thought about making your napkin holders with an engraved letter in every letter of the abc’s ? Maybe accept preorders too ? Beautiful works of art. Much thanks ! 👍 👋
Thank you so much for the encouraging comment, I appreciate it. I actually downloaded some letter from etsy to use in the laser engraver. Ill post a picture when I make one. Thank you for the comment and the idea.
Thank you so much for the encouraging comment, I appreciate it. I actually downloaded some letter from etsy to use in the laser engraver. Ill post a picture when I make one. Thank you for the comment and the idea.
I made my clips out of scrap 1/8 ply on my laser, and they work out great.
Oh is that to hold the backing in? That's a good idea, thanks for the tip. I have to get used to this thing so I can incorporate it into my work flow.!
great video , love the narrating and making me laugh love the Laser
Thank you brother, I appreciate that!
I’m glad I found your channel
Thank you! I am glad you found it too!! You are awesome!
The fart @ the dollar tree sent me hahaha.. i had to subscribe after only wanting to like the vid!
🤣🤣🤣 Xtool was like "do you need to put the farts in the video?" Thank you for subscribing, you are the subscribers I like!! 🤣
A peg table would work great in setting and holding the picture frames down too.
Thank you for the advice. I want to make one of those real soon.
Great video so thanks for all those tips. As for your farts🤣my wife told me once that when she went shopping with my daughter, i think it was Aldi, she said there was an old bloke a pensioner walking in front of them and suddenly he let off a loud fart that everyone in that aisle at the time looked around sniggering, the pensioner turns round and says "sorry, it's the prunes you know" and next minute everyone was laughing, and that fart you did in the dollar store sketch just reminded me of that story. Take Care.
Barry (UK)
😂😂😂 Thank you for the comment and the story! It had me laughing so hard my wife asked me what I was laughing about so I read it to her too and we both got a laugh. I love the UK comments because I start to read them in my head with an accent. 😂
Man, thanks for the tip on measuring the frame, I have struggled to make a good fitting frame, gonna go try it today. One suggestion, I don’t have a diode laser but on mine I learned if you are doing a lot of writing I place my deck so the laser is out of focus a little further away than recommended and it darkens up the letter very nicely. Give it a try
Thanks for the comment, I am glad you found some value in the video. I heard that about putting the laser out of focus but I don't think I have a setting for that. I can just only adjust power and speed. I think I need to turn the power up maybe.
Great Video! I can see myself making some of these projects in the future.
Thanks brother, I appreciate that. I cant wait to see what this thing can do. I just subbed to your channel.
Wish X-Tool would help me out. It so expensive to start up a woodworking business I’m have way there with the tools I need. I’m buying 1 tool at a time. Can’t wait to get the X-Tool
Yea that's how I started, it will make a better story when you finally make it and look back over all the hard work you did to get there.
Great video the song for the dogs good one. I truly enjoy Bearded Viking channel you all are great over there
Thank you, I appreciate the love!! The dogs are with me all day and I am always putting on a show for them, they look at me like I'm crazy 😂
Man your hilarious! Love your videos thank you! 😅
Thanks, I appreciate that.
Love your humor, but man, I can smell your workshop from my home.
😂😂😂 TH-cam better never start doing smelevision!! I'm going to start selling scratch and sniff stickers as merch! 😂😂😂
when drilling the holes into the wood, run the drill backwards for the initial breaking of the wood, then turn it to normal.
Thank you for the tip, its appreciated. you are living up to your screen name!! 😂😂 I am definitely going to try that.
GRATS on the Xtool!!!
Thank you, It is really fun so far. Cant wait to really dive into it.
You have great marketing ideas.
Thank you, I appreciate that.
Dog concert is too good 😂
Thank you! they just look at me like I'm crazy!! 😂😂😂
Great show buddy thx so much 😊
Thank you, I appreciate the comment.
Dude, on your narrow end table project wood; Use a Hand Plain (medium size) to plain down the edges or center of your pieces accordingly to make them flat, it will take all the gaps out. It is quick and easy, AND it will hone your skills and without the cost of a Plainer or Jointer which are many hundreds each. A good Hand Plain even today is about $30, less if you look around for a used one; on the internet or at garage sales. Practice on old wood, fence pickets, etc. Remember to always go WITH the grain, yes, you will have to learn how to read the wood, which ALL wood workers need to do. Also, make yourself a Shooting Board that will make a pro out of any beginner, they make perfect edges/board pieces in seconds. Make sure to keep all your Hand Plains sharp before use. Anything worth doing is worth doing right the first time.
I do have one hand plain that I got from Lowes. I think its a Kobalt. I have a hard time trying to figure out how to adjust it.😂 I have been wanting to get into hand planing but I have to make the jigs and figure out how to sharpen them and all that. Not that its all to hard or anything I just haven't had the time to learn it. Thank you for the advice and wisdom, I really appreciate it.
Bro congrats on the laser brother !!!! That’s so awesome man . And the fart sounds 🤣
Daniel?!?! Whauda H£!! Are You Doing Here!?! Strange seeing you on another channel in the comments section besides your own!! The only thing stranger would be seeing you at my local Home Depot in TX! 🤔😉
LoL 😂
Love You Brother!! 🫡 ✌️
@@PiercesPerfectPieces I love watching my fellow woodworkers , plus jasco is a Friend
@@Bearded-Viking-WoodWorks Oh I understand, I wasn’t meaning anything bad. I’m a YT $Iizut too! 😉
Thank you brother I appreciate that, I meant to tag your page when I said your name but I couldn't figure it out.
@@jascogoods lol all good bubba 🫡
Where do I go to get tickets to the dog concert? Great job guy!
Tape is like the holy Grail
Agreed!!
Love the shirt
thank you!! wait which one? I am wearing like 4 different shirts!! 😂😂😂
Good video, if only we all had a free last engraver!?!
Right that would be awesome if everyone got a free tool of their choice when they turned 18! 😂😂😂 Thank you for the comment!
"Git to building" True Dat!..
Right! 🤣 it doesn't mean nothing if you don't do that part.
Fyi I just subscribed thanks to Spiderman, give that guy a raise 💰 😅
😂 Thanks, he needs the money since he just started collage!!
😂 love this!
Thank you!!!
wow !!! I can't believe that you received a XTool CNC without even asking for one as a video blogger... I'm on a disability now unfortunately after an overweight patient stumbled and used my back and shoulder as a guardrail...long story short if an individual has the unfortunate incident of having to utilize the disability program....with what insurance and government payment (after the insurance company makes sure that they deduct what the government pays first) sorry guess it was a longer story...if you don't want to starve and stress 24/7 where payments, housing and meals will Materialized through air...you need to try something to supplement the income...so yup wanted one but can't afford $5000 to $9000 CDN for the gadgets...but hey LOVE your chanel and the fact you bring humor to the prodjects..I'm glad you received the "toy" you've wanted for years...can't wait to see what projects you make... Me I suggest something for your wife first....happy Wife happy life
thank you for the comment and sharing your story. I am sorry you got hurt, that sucks. I hope things turn around for you!
Look at you big ballin' with the S1. That's the laser I wanted but since I'm not as cool as you I settled for the Ortur Laser Master 3 to start out with. 😂 I gotta know, did your wife really let you hang that in the bathroom? 🤣 Good stuff as usual. Keep it up.
You just have to make fart videos on TH-cam and they will send you one! 😂😂😂 No she didn't let me hang it in the bathroom. She's gotta get sainthood for putting up with me! 😂
@@jascogoods , hey, just a quick video idea for ya, on the cheap things that make good money front....I was making some wooden earrings on my laser last night and thought, hmm, I bet he could do a video on this. I took a $2 12x12 piece of 1/8" Birch plywood, stained it, and cut 18 pairs of earrings out of it. That comes out to about eleven cents per pair. The hooks and stain add maybe another $.40-.50 per pair. So, it costs maybe $9 to produce these 18 pairs of earrings, which I sell for $8/pair. 18 pairs of earrings at $8 per pair is $144. Pretty good profit margin. Anyway, just thought I would share that with ya. Do with it what you will.
Can you please make a video about how to set up an Etsy shop if you are brand new to Etsy? Could you include any tips or advice along the way during the setup process? Thanks
No Problem, I have it planned to make one of those videos in the future. If you need one sooner there are a ton of videos on TH-cam on how to set up an Etsy channel.
Can you build a jewelry box that hangs on the with a door mirror in it
I think you were going to say hangs on the wall but it left out wall. I can do one of those. let me look into it and plan it out. thanks for the comment.
I'm so glad I found your channel! Do you have a video for the cell phone holder?
Thank you and thanks for commenting. I don't have a video for the phone holder I ran out of time for the video so I didn't do it. I will put it in a future video for you.
I was actually interested in those specific drillbits that you had. Do those happen to have flat spots ground for the stop collars?
If you buy a larger size oak dowel that will get you contrasting wood and it will be a larger size so you can use the other drillbit. Of course, it means a trip to the store too.
the drill bits I have with the brad point do have a flat spot for a stop collar. I'm not sure about the regular bit, Ill have to look. Thanks for the tip on the oak dowel. I actually went last weekend and got a walnut dowel bigger than the one I used. I'm going to drill over the dowel I used about 1/4 of an inch deep and then use the walnut dowels. Thanks for the comment.
@@jascogoods do you happen to have a link or anything for those Bradpoint drillbits? I know everybody’s always trying to hawk their crap, but when people have good products, I like to support their channel when I can
“Who let the dogs out, woof, woof, woof!”
That is going in the concert rotation!! 😂😂😂 Thanks
I may be wrong but maybe your drill bit is either a metal one or has been blunted. Im still finding out about drill bits n Im a 66yr old granny new to basic woodworking so sorry if Im wrong what do I know 😅. Btw I love your videos😊
You may be right, I am never surprised when I hear about something new that's been around forever. It happens to me all the time.😂😂 Thank you so much for the comment and the encouragement.
I could be mistaken but the first bit sure looked like a Kreg pocket hole bit and the second was a concrete bit…Im pretty sure on the first and 90% sure on the second.
I'm not sure on the concrete bit but the first one is a brad tipped bit. Pretty much the same bits the Craig uses so good eye.
U forgot the dowels on the engraved napkin holder. End grain to face grain
Thank you, I didn't have any face grain plugs but I got a plug cutter so I can make my own.
@@jascogoods didn't say plugs. If you screwed it together, I get it. But you used the dowel pins in the first one so I was just a bit confused. I get like that. Get the munchies too much
I don't know exactly what drill bits your using, but some bits will cut cleaner if you run them in reverse first. It scores the wood before the actual task.
Ill have to try that, thanks for the tip. Am I using the wrong kind? I just have a bunch of drill bits in a drawer that I pulled this out of so I'm not 100 % sure where this one came from.
@@jascogoods I don't think you are. I often prefer brad point bits because they don't wander. And the sharper they are, the faster they dig in. especially on soft woods. I have a basket full of various bits I've collected over the years next to my drill. I probably need to sort them one day. I say "one day" because that's probably how long it'll take. LoL! Thanks again for a great video. Always keep me thinking.
I'm very limited on what I can purchase. I have a set of dewalt bits. One thing I noticed is anything over 3/8ths it's just tares every thing up, slow speep/high speed regardless. Forstner bits work a little better. But still has tare out. Flip/flop, tape / backing board just don't get it.
@@MrTrecutter1 I understand your frustration. I have some cheap bits too, and as I mentioned to Jascogoods, I sometimes run the bits in reverse. On a drill press, that means I have to physically turn the bit backwards. This cuts the top fibers of wood, making a score line of sorts, and then run the bit normal. Don't cut all the way through and then repeat the process. Yes, it can be time consuming, but it does prevent tear out. Also, and I'm not complaining, I'm a 100% Disabled Vet, so I too am on a limited income. I have purchase many quality tools, bits, and blades from garage sales, flea markets, and pawn shops. So there are options to get quality items at a lower price. I hope this helps and God bless.
Can you show me how you market and sell items? Because that is what's it all about...... you can make, but if not properly marketing it means nothing..... please share....
No Problem. I will add it into the next video I make about selling items.
1st comment my man!
😂😂😂 congratulations!! Thank you for the comment!
@@jascogoods every comment helps spread your videos, anything to help you out! I enjoy your videos man keep it up
Doesn’t matter how old you are, farts are just funny. Don’t know if your x-tool will let you but try backing off the laser spacing so it’s out of focus and it will darken the lettering. I have a co2 and it works great for me,
My wife is still waiting for me to grow up!! 😂😂 I will have to try the backing off thing. This is the first stuff I've done with this thing. I am excited to learn more and figure it out. Thank you for the comment and the tip.
How many of those napkin holders have you sold? Sry if I missed it in the video
I haven't listed them on Etsy yet. I was just showing products that are already selling on etsy and how to make simple projects and then make them more valuable with personalization.
@@jascogoods thanks for the response. id love to be able to sell on etsy. Its just so saturated. seems like anyone that can get wood is selling woodcraft on etsy.
How many watts on that engraver? They sell a 10W, 20w & 40w version
The one I have is 20W. There's a link in the description to the one I am using.
@@jascogoods thank you very much; have a feeling it will be ordered within the next day or two after talking to the "boss" 😜
Lingerie 🤣 That fit is poyfect! Congrats on your new toy JASCO 🎉🎉
ADADABAGLUE 🤘🏼Love BVW 💜
Thank you so much!! I appreciate the love and encouragement.
How much does that machine cost
It depends on the kit and laser you get but it starts at $850
Sooooooo, how much is this Lazer printer?
It depends on what one you get. The one I am using was $770 through the TH-cam link. But I know they have cheaper ones that aren't enclosed
@@jascogoods is it hard to learn?
Went to your etsy site to buy them but only saw shirts for sale and no napkin holders 😢
Sorry, I haven't put stuff back on my etsy yet. I am trying to build up my TH-cam and its really hard to do both.
How much is an S1
Anywhere from $800 to $1500 depending on the package you get.
What's Up?
Not much what's up with you??
Already own a CNC but having a real hard time figuring out what products to focus on..
I really want a cnc too!. You can really batch out a lot of projects with one of those. There's a video on TH-cam about a woodworker that made a ton of money making these wallet / watch/ side table trays and selling them on Etsy. he used a cnc to make a bunch at once. You could probably look through Etsy for ideas of what people are making with them.
Oh man! Farting during the video is very nasty thing to do - the odour spreads overseas!
😂😂😂 sorry my TH-cam coach said to just act natural. I guess I took it overboard.
Way too many fart jokes in 1 video. Was like someone telling a joke, then telling it 10 more times to the same people at the same party, during the same conversation. Great video, and the gag was funny the first time- just not the next 9
Thank you, I appreciate the comment. Did my wife put you up to saying this because she tells me this 5 times a day.
@@jascogoods No, I put her up to saying it 5 times a day. This is all an elaborate plot and you've only been made aware of the first layer
Your using an engraver and calling it woodworking ?…
That is rather sad
If what I call things makes you sad, you might want to get on an antidepressant. 😂😂😂
I would have enjoyed your videos but I do not enjoy listening to your gas.
honestly we need to talk about labor not the cheapest materials we got. it's not good talk: 1 dolar piece of wood and scraps of scraps... what about thousands of dollars invested in tools? so it's worth to be paid for what you've been done even with one dollar piece of ... whatever
i'm not really following what you are saying.
Thanks for sharing your story and experience, fascinating to watching your projects come to life. I’m just a woodworking fan. Your sound effects are bringing me laughter. ? Have you thought about making your napkin holders with an engraved letter in every letter of the abc’s ? Maybe accept preorders too ? Beautiful works of art. Much thanks ! 👍 👋
Thank you so much for the encouraging comment, I appreciate it. I actually downloaded some letter from etsy to use in the laser engraver. Ill post a picture when I make one. Thank you for the comment and the idea.
Thanks for sharing your story and experience, fascinating to watching your projects come to life. I’m just a woodworking fan. Your sound effects are bringing me laughter. ? Have you thought about making your napkin holders with an engraved letter in every letter of the abc’s ? Maybe accept preorders too ? Beautiful works of art. Much thanks ! 👍 👋
Your thoughtful items are very beautiful. 👍👍
Thank you so much for the encouraging comment, I appreciate it. I actually downloaded some letter from etsy to use in the laser engraver. Ill post a picture when I make one. Thank you for the comment and the idea.