Dacă conectezi sursa de energie crește hai să zicem la 80 V amperajul find foarte mic, dar conectat un consumator, voltajul scade enorm, nu rămâne constant. Proiectul este bun dar nu folosește la nimic exp. pentru iluminare de durată. Pentru iluminare de durată trebuie neapărat ridicat amperajul
@@Nomine_Pater Yes sure! At first, actually you can use any tips of ferrite core(which in this video you saw a barrel form of them) and most of them are look like the letter (E) anyway, you can use any tipe of them... And about wire turns... You need two winding steps.. firs you have to turn wire about 30~40 or even more turns (more turn, more out voltage) actually I made it and I think you can't get more than 40V boost, I don't know, maybe I couldn't get more!! I think 30 turn is enough for this step, step two, you have to turn wire about 7~10 with another wire around the core, And one thing! in this video you saw this guy used two core for each step , but, you can use just one core and turn both different wires in one core, no matter, and It doesn't matter which direction (clockwise or counterclockwise) you turn the wire. and here you are! The text is going too long! I hope you understand and if you have any questions, ask again here.
@@mohammad3420 Thanks, sir! that´s very KIND of you. Now I know a starting point to assay and try it. I have seen those thieves of joules but this funny project, if it´s enhanced a bit, could serve for other things, particularly, if I checked its square wave could be made sine... Thanks, sir! (that's is kindness)
Dacă conectezi sursa de energie crește hai să zicem la 80 V amperajul find foarte mic, dar conectat un consumator, voltajul scade enorm, nu rămâne constant. Proiectul este bun dar nu folosește la nimic exp. pentru iluminare de durată. Pentru iluminare de durată trebuie neapărat ridicat amperajul
Bunu deneyeceğim harika görünüyor ve çok basit
Nice!
How many turn of (inductors)coil 1,coil 2
How long it will last ?
All depends on the Batt!
🤔Se botar uma carga não dar essa voltagem o que ta sendo mostrado é o capacitor.👍😄 carregando..
👋👋👋👋
ben yaptım ama voltaj yükselmiyor sabit kalıyor pilin voltajı neyse onu gösteriyor
kullandığınız transistörün npn yada pnp olduğundan emin olun ve tekrar deneyin.
Make sure the transistor you are using is NPN or PNP and try again.
Hepsi tamamda 63 volt kondansatörün 80 volt vermesini anlayamadım.
En garibi 80v çıkış nasıl 63v kondensatöre zarar veremiyor
Transistör ismi ve değeri nedir
D882
Güzel fare tuzağı olur 😁
Amazing
Woow super!!
👍👍👍👍👍👍👍 80V 💪
ki ki diye banalen name gulo message kore janan
Fake
everything in this video is real and it works ,
@@mohammad3420 Please! Can you tell us anything about the TURNS of that coil, sir?
@@Nomine_Pater
Yes sure!
At first, actually you can use any tips of ferrite core(which in this video you saw a barrel form of them) and most of them are look like the letter (E)
anyway, you can use any tipe of them...
And about wire turns...
You need two winding steps..
firs you have to turn wire about 30~40 or even more turns (more turn, more out voltage) actually I made it and I think you can't get more than 40V boost, I don't know, maybe I couldn't get more!!
I think 30 turn is enough for this step,
step two,
you have to turn wire about 7~10
with another wire around the core,
And one thing!
in this video you saw this guy used two core for each step , but, you can use just one core and turn both different wires in one core, no matter,
and It doesn't matter which direction (clockwise or counterclockwise) you turn the wire.
and here you are!
The text is going too long! I hope you understand and if you have any questions, ask again here.
@@mohammad3420 Thanks, sir! that´s very KIND of you. Now I know a starting point to assay and try it. I have seen those thieves of joules but this funny project, if it´s enhanced a bit, could serve for other things, particularly, if I checked its square wave could be made sine... Thanks, sir! (that's is kindness)
@@Nomine_Pater
You're welcome!
happy to help