Question, my ELM327 arrived in ADHOC mode (stupid) for 6 years i would use it searching non stop for an STN or Infrastructre mode or Version of the product, one day i decided to see if port 80 is open , it was (HTTP GUI), i switched it to Station mode, i entered SSD, Encryption (WPA2PSK CCMP) and the key ( even kept a screen shot) the ELM327 connects a few seconds to the AP and disconnects. I made sure the AP is set to the same Encryption type, and key... I even set a static/Fixed in the ELM327 .. Any tips? The unit is close to AP, tried many APs, legacy, wrt54g, dd-wrt. different channels. no go .
Hi. Mine also in ad-hoc mode, and no android phone sees it. Wondering, if I switch it to Infrastructure, and do a wifi tether with my phone, (WiFiOBD as SSID) will I be able to use it? Have you tried it? Thanks.
Yeah same, it just doesn't show up in my wi-fi list... All the neighbours wi-fi's appear juat not the OBD2, using an Android phone, have restarted everything
Thanks a lot for sharing your knowledge.
My pleasure
Very helpful, thank you so much
Glad it was helpful!
Cool video i have a ELM327, how do I factory reset it .. Thank you .
Very usefull instructions!!!! Bravo!
Glad it was helpful!
I followed you set up instructions and got to a point that was showing checking model and that was the end
أيهما أفضل جهاز بلوتوث أم جهاز واى فاى ؟
thanks a lot
You are most welcome
The light is on on the unit, however it doesn't show up in my wi-fi list....any ideas?
Try to unplug and plug it back in, you might have a defective unit. Make sure yours is a WiFi not the Bluetooth type.
Can I connect to ipad it's possible? Tkx you 🤗
This is only compatible with Android.
Question, my ELM327 arrived in ADHOC mode (stupid) for 6 years i would use it searching non stop for an STN or Infrastructre mode or Version of the product, one day i decided to see if port 80 is open , it was (HTTP GUI), i switched it to Station mode, i entered SSD, Encryption (WPA2PSK CCMP) and the key ( even kept a screen shot) the ELM327 connects a few seconds to the AP and disconnects. I made sure the AP is set to the same Encryption type, and key... I even set a static/Fixed in the ELM327 .. Any tips? The unit is close to AP, tried many APs, legacy, wrt54g, dd-wrt. different channels. no go .
me too i wonder why i cant acess it as well
Hi. Mine also in ad-hoc mode, and no android phone sees it.
Wondering, if I switch it to Infrastructure, and do a wifi tether with my phone, (WiFiOBD as SSID) will I be able to use it? Have you tried it?
Thanks.
does this read and remove abs light
આભાર
Can't connecting to phone
You need a computer with USB port
i did all steps but my device keep disconnecting after a short time and i have to repeat steps.
Same here...
You bought a fake elm 327
Same
i have the massage latency to high !!!
My wifi doesn't show obd. After making wifi settings on the app and going to wifi settings it will not show obd 2 on my wifi...
What does this acc do
I followed what you did and it still didn't connect
Make sure you are connected with Wireless not Bluetooth.
Yeah same, it just doesn't show up in my wi-fi list... All the neighbours wi-fi's appear juat not the OBD2, using an Android phone, have restarted everything
Is it compatible with iOS devices??
When I connect to the wifi it connect like for two minutes and then it disconnects and doesn’t show the wifi for obd
Did you fix this?
@@LaneyaWilesno but I bought a more quality obd scanner and it works perfect
What is your better odb please , same problème, ip is good bit disconnect all time or dont find wifi odb