Not enough gun powder to provide a sufficient gas operation to cycle with the blue shell ammo you used, defiently shouldn't be the spring in the ammo tube. Get better ammo
and that's why I leave them STOCK! I have two Hatsans and they both run like a top. No jams UNLESS I don't have them fully into my shoulder, but otherwise they process whatEVER I feed them. I'd rather have the one less round available as long as I know the f-er is going to work when I need it to. Know what I'm sayin?
You have to load first shell in the chamber. If you try to insert another shell, when you push the flap the receiver closes. Btw I'm pointing away from myself. And I'm pretty sure safety was on
Nice shot gun I own one myself dnd it runs great but I’m not sure about that stock you have it really takes away from the original look witch I like a lot better.
couple questions, is 6 shots in the mag legal in Canada? also what did your mag hold without the extension?, I have the exact firearm and can only fit 4 2 3/4 shells, i've seen others fit 5 on youtube. what could the issue be?
Stock the shotgun can hold 5 but it's 4 in the tube +1 in the chamber. I bought this +1 extension from a Canadian website so I assume it's legal. Now it's 5 in the tube +1 in the chamber. I even saw there is a +2 extension available from another Canadian site but it was much more expensive.
interesting I've seen a vid where the dude has the non adjustable stock, no extension and fits 5 in the mag 1 in the chamber, maybe the older models were different?
the newer models are chambered 3". It will hold 4 + 1, 3" shells. But if you load 2 3/4 shot, you can fit 5 + 1. Legal because mag has not been moded. Zombie Hunt, you are shooting a prohib rifle. 5 in the mag is max on a semi. That is only on a non modified mag. Those mag extensions are sold for the pump action versions which have no limits on mags.
The extension is intended for pumps. For an auto, its now prohibited. Five rounds of 3" only for that gun only. Plus a ghost is fine too. Now a 3 1/2" taking 7 rounds of 2 3/4" is fine, because it still only holds 5 3" rounds.
hey I have two hatsan, one is like yours but is 7+1 + ghost load, an the other is the autodefend is 5+1 but short barrel, my question is can you give the brand and model of your side sadle. thanks
Julio Castillo sure can. its not marked. give me a min to find the info. making a short review about it. only thing I recommend is to use semi permanent loc-tite for the main bolts and all small bolts. they work themselves loose very easily when I first used it. and the bolts will mark the gun a little, wear of the black finish near the bolt holes. nothing serious
Yes. Semi Auto shottys can be finicky. Especially with low brass birdshot. Maybe not enough power to cycle the action. High brass works flawlessly. Pump action it doesn't matter as much
Instructors will always tell you regardless of whether the safety is on or off to always point the gun in a safe direction. Do that and you're good. Don't rely on safety mechanisms. Possible gun could misfire. Extremely unlikely. But not unheard of
Negligent discharges are inexcusable regardless whether the firearm is pointed downrange or not. When you are loading without your safety on the chance you will catch your trigger is highly highly increased. It doesn't take a genius to press a button, it just takes attention to detail which you are clearly lacking. It's ok it won't be my toes you end up blowing off.
You load shells 3-4 inches away from the trigger. If you set it off, you're just an idiot and shouldn't be allowed near guns. Period. I've never heard of anyone accidentally discharging their firearm. But I don't know any idiots. Maybe you do
+tom simpson You're telling me you've seen people blow their own foot off or almost kill someone. ...and you're telling ME I need formal training. Sounds like YOU need smarter friends because you're hanging out with idiots. And clearly they have no common sense. Morons with formal training are still morons.
Basically yes. But don't expect to be able to keep it in the family as long as you would the Benelli. It's a good "train once in awhile, keep it handy for self-defense" role. See James at tfbtv, he did a couple of vids where a black aces tactical and a citidel did NOT even reach 500 rds before crapping out but the Maverick88 did it with flying colors. It's an affordable option is what it is.
Hey man you should take that dryer 2A appliance repair shop and ask them how much to fix. That was really cool. Who doesn't love blowing some s*** up.
Not enough gun powder to provide a sufficient gas operation to cycle with the blue shell ammo you used, defiently shouldn't be the spring in the ammo tube.
Get better ammo
It does that at first. After it is broken in, cleaned, and lubed it rocks!!
Yes runs like a dream. Standard and high velocity run smoother
Most people don't realize that people purposely leave the rubber on the charging handle because it doesn't hurt your fingers as much.
I leave it on.
you need a longer spring when you change the mag extension. Don't know if you did.
I've never had a jam in my mpa I would say go with the 9 round magazine tube rather than an extension
Has anyone seen my dryer? I'm missing my dryer. It's like it dissappeared.
Most people don't realize that rubber on the charging handle is to protect during shipping lol. ( I did too)
Sean Last Name Here Haha you're right. I found out a year after I bought. Never read directions
You're supposed to take off the rubber cover on the side. It's only for protecting the gun when stored.
Thanks. Yeah I found out after this video. Cheers
and that's why I leave them STOCK! I have two Hatsans and they both run like a top. No jams UNLESS I don't have them fully into my shoulder, but otherwise they process whatEVER I feed them. I'd rather have the one less round available as long as I know the f-er is going to work when I need it to. Know what I'm sayin?
Guys....the big plastic knob on the charging handle is just a thing intended to protect it during shipping. It comes off...
wow. I've had the shotgun a few years. i never knew that. even though the photos i see didn't have it. i just twisted it off. popped right off. thanks
Zombie Hunt Ottawa No charge.... ;-)
no debes de usar cartuchos con menos de 36 g de polvora. por eso se encasquilla.
Hatsan mpa operates smoothly only with heavy loads....
am i the only one who noticed the gun was ready to fire when he loaded it?
You have to load first shell in the chamber. If you try to insert another shell, when you push the flap the receiver closes. Btw I'm pointing away from myself. And I'm pretty sure safety was on
Nice video. Where did u buy your magazine tube extension.
Online Canadian website. I wanna say sfrc I think
Nice shot gun I own one myself dnd it runs great but I’m not sure about that stock you have it really takes away from the original look witch I like a lot better.
Dude, take the shipping plug off your charging handle. Oh and lose the fidora.
I leave em on, makes using the firearm more comfy. To each their own....right?
What brand magazine extension is that and for what brand shotgun?
how far away where you?
couple questions, is 6 shots in the mag legal in Canada? also what did your mag hold without the extension?, I have the exact firearm and can only fit 4 2 3/4 shells, i've seen others fit 5 on youtube. what could the issue be?
Stock the shotgun can hold 5 but it's 4 in the tube +1 in the chamber. I bought this +1 extension from a Canadian website so I assume it's legal. Now it's 5 in the tube +1 in the chamber. I even saw there is a +2 extension available from another Canadian site but it was much more expensive.
interesting I've seen a vid where the dude has the non adjustable stock, no extension and fits 5 in the mag 1 in the chamber, maybe the older models were different?
garbageday99 could be. I've heard they have changed somewhat over the years. You might be right
the newer models are chambered 3". It will hold 4 + 1, 3" shells. But if you load 2 3/4 shot, you can fit 5 + 1. Legal because mag has not been moded. Zombie Hunt, you are shooting a prohib rifle. 5 in the mag is max on a semi. That is only on a non modified mag. Those mag extensions are sold for the pump action versions which have no limits on mags.
The extension is intended for pumps. For an auto, its now prohibited. Five rounds of 3" only for that gun only. Plus a ghost is fine too.
Now a 3 1/2" taking 7 rounds of 2 3/4" is fine, because it still only holds 5 3" rounds.
hey I have two hatsan, one is like yours but is 7+1 + ghost load, an the other is the autodefend is 5+1 but short barrel, my question is can you give the brand and model of your side sadle. thanks
Julio Castillo sure can. its not marked. give me a min to find the info. making a short review about it. only thing I recommend is to use semi permanent loc-tite for the main bolts and all small bolts. they work themselves loose very easily when I first used it. and the bolts will mark the gun a little, wear of the black finish near the bolt holes. nothing serious
Nice vid, where can i get myself one of those collapsible stocks for my mpa? I'm in the uk.
You can't,your punk arse liberal joke of a government won't let you have big boys toys
@@jaydee9262 Got one about a year ago thanks.
High Quality Entertainment.
We can't get the benelli m4 stock style escort in the us. Or at least I can't find one.. :(
Oh no way i didn't know that. found mine online
Swap out the follower to a metal one. The cheap plastic one binds up. Garbage followers used
This si the 20 Or 18?
Quebec doesn't really count as part of Canada
Please tell me where to buy that stock
The stock came with the shotgun. There are different models. This one is Hatsan MPA-TS
There's one with this adjustable stock. And another one with the solid stock with the 2 shot shell compartment in the stock.
Damn, I have the solid one... The TS looks so cool
Very cool. Thanks
Very cool
Tactical fedora, operator as fuck
By extending your tube, your spring tension gets weaker.
Yes. Correct. However haven't noticed any issue. Mine is a 1 shot extenion. There is a 2 extension but over $100 bucks
+Zombie Hunt Ottawa I wonder why the shells were ejecting wrong. Didn't like that ammo maybe?
Yes. Semi Auto shottys can be finicky. Especially with low brass birdshot. Maybe not enough power to cycle the action. High brass works flawlessly. Pump action it doesn't matter as much
I don't always load and chamber with my safety off but when I do............
Instructors will always tell you regardless of whether the safety is on or off to always point the gun in a safe direction. Do that and you're good. Don't rely on safety mechanisms. Possible gun could misfire. Extremely unlikely. But not unheard of
Negligent discharges are inexcusable regardless whether the firearm is pointed downrange or not. When you are loading without your safety on the chance you will catch your trigger is highly highly increased. It doesn't take a genius to press a button, it just takes attention to detail which you are clearly lacking. It's ok it won't be my toes you end up blowing off.
You load shells 3-4 inches away from the trigger. If you set it off, you're just an idiot and shouldn't be allowed near guns. Period. I've never heard of anyone accidentally discharging their firearm. But I don't know any idiots. Maybe you do
I've seen people blow their foot off. Or almost kill/injure someone else. You clearly have no formal training and or common sense.
+tom simpson You're telling me you've seen people blow their own foot off or almost kill someone. ...and you're telling ME I need formal training. Sounds like YOU need smarter friends because you're hanging out with idiots. And clearly they have no common sense. Morons with formal training are still morons.
Turkish Benelli
Basically yes. But don't expect to be able to keep it in the family as long as you would the Benelli. It's a good "train once in awhile, keep it handy for self-defense" role. See James at tfbtv, he did a couple of vids where a black aces tactical and a citidel did NOT even reach 500 rds before crapping out but the Maverick88 did it with flying colors. It's an affordable option is what it is.
Hatsan shotguns jamming up. Oh what a surprise 🙄
I have two and never an issue. Remember all those Kimbers jamming up? Can't blame the Turks on that one. It happens.
cheap ammo
Cheap and reliable. Plus locally manufactured in Canada.
+Zombie Hunt Ottawa I like Canada