Wow - that's a really impressive build! You even have both sets of yokes and rudder pedals linked. This is a home sim dream setup. Everything looks authentic.
This is fantastic! It belongs in the FBOs at local GA flight schools! All you need now, is some salvaged parts for the doors, ceiling, and floor, and you're all set. Nice pattern work, by the way! Thanks for sharing this. :)
reminds me of the movie Vita with the super Pilatus sim. My son and I were lusting after that one! One interesting thing, with real flying, one does not keep the yoke twisted after setting up the turn. Ailerons are nearly neutral and elevator/rudder controls take over. Good job!! Pilot there did a great job, also.
Nice. I have my system integrated to be dexterically accurate to the F-16 CM Bl. 50 cockpit. So, it doesn't look or feel like an F-16 until you put the headset on and then it's all there. I love doing this stuff.
Very impressive setup. I've been in a 6DOF A320 and Cessna 172 Level-D full motion simulators, this cockpit and the display is very immersive. The panel is awesome. The only thing lacking is the motion platform. The seamless outer display can only be delivered by a projection system with a curved screen.
Great Job in building this sim. It shows care and attention to detail. Might be nice if you guys let us know the building process so we can fly in formation one day!😎
I would recommend not using trim in the landing phase. I get that it helps, I did it early on in my training, but at that phase you should really be power idle, lest hand on yoke and right hand on throttle ready to go around if need be.
Amazing! I love that you have just steam gauges. As much as I would love to have a setup like this, I don't have room. VR is a nice alternative, though.
Great build except for keeping us in suspense. You’ve got to tell us how you set up those monitors/projectors. Incredible visuals. In guessing possibly projector in the front and large monitors on the sides. But, if so, how are they set up/synchronized?
Wow!! This is the sort of rig that gets the National Transportation Safety Board knocking on your door inbetween rebooting the system after you stalled at takeoff and crashed into the sim scenery.
I was impressed with the build. You need to share your setup. Only a couple of things, 1 you only got to 500 feet and 2 where was the base leg. Rectangle circuit, not oval. Unless you are landing on an aircraft carrier. All in all quiet good. Thank you
I, and many others who posted want to know the construction details, which software are you using and where did you get the panel instruments and yoke.
This is a great build. You really should share specs for this, or figure out a way to package and sell it. This is as good as any I’ve seen and think it would sell quite well depending on cost.
Hello, great looking sim. I have a similar sim set up and I was wondering what program you use to set your screens up to where you don't see any of the instruments and exterior window frame and wings of the virtual plane? I am using MSFS 2020 for flight sim software. Thank you in advance for any help.
I have only One question. Which simulator software did You use ?? I mean X-plane 10 or FSX ? BUt anyway, the best cessna 172 homemade simulator Iˇve seen.
Just Flight had a wonderful C-172 DLC, compatible on regretted FS9... Still flying FSX SE, Prepar3D V1-2-3, Flight Sim World, Aerofly FS1-2, X-plane 11 etc. CYUL
Hello, extremely impressive. What monitor did you use-- I am sorry my questions have gone into the replies section -- this is my first time Thank you and best wishes
Looks like they actually used a 172 cabin/cockpit as a starting point. I'll bet that's easier than I used to think, due to all the abandoned ships out there waiting to be exploited.
Amazing job on the sim!! Adjust trim in the flare was something I've never seen before though, also I think you were max 500' AGL? Might want to watch out for bad habits
Wow - that's a really impressive build! You even have both sets of yokes and rudder pedals linked. This is a home sim dream setup. Everything looks authentic.
No thee dream build is the one were the guy action bought a b737 cockpit and making it were every switch actually works in the simulator.
@@r3ady150 I saw that video! I joked with my wife that I wasn't thinking big enough with my home flight sim setup. I think she was worried.
Pretty much, except for the extra space but that's a plus. I probably wouldn't fit in a real Cessna but I would fit in this
@@SDFalchetti 😅🤣🤣🤣
amazing build
That is one of the most accurate 172 simulator panels ever. That is amazing. Nice job!
This is fantastic! It belongs in the FBOs at local GA flight schools! All you need now, is some salvaged parts for the doors, ceiling, and floor, and you're all set. Nice pattern work, by the way! Thanks for sharing this. :)
Nice sharing medam🙏👍👌
Excellent work! I think the simulator and the POC did an excellent job! 🤓👍🏻 Keep up the great videos!
Excellent! she can go for her solo right away!
That's amazing! What I'd like to see is a description on how you set this up? What flight sim software you used? This is really such a teaser.
My heart was racing the whole time. I gotta build one of these!
She's got golden hands! Keep up your good work, see you soon at the airlnes. All the best my dear.
reminds me of the movie Vita with the super Pilatus sim. My son and I were lusting after that one! One interesting thing, with real flying, one does not keep the yoke twisted after setting up the turn. Ailerons are nearly neutral and elevator/rudder controls take over. Good job!! Pilot there did a great job, also.
Nice. I have my system integrated to be dexterically accurate to the F-16 CM Bl. 50 cockpit. So, it doesn't look or feel like an F-16 until you put the headset on and then it's all there. I love doing this stuff.
Very impressive setup. I've been in a 6DOF A320 and Cessna 172 Level-D full motion simulators, this cockpit and the display is very immersive. The panel is awesome. The only thing lacking is the motion platform. The seamless outer display can only be delivered by a projection system with a curved screen.
Nice flying!
Really great home cockpit ... Awesome !!!
thank you
Oh my God, it's great
Much better than the ones you buy, Fantastic. I want one.
Great Job in building this sim. It shows care and attention to detail. Might be nice if you guys let us know the building process so we can fly in formation one day!😎
This is amazing, very well done and yes one of the best ones ive seen so far.
Excellent💯👍👏
I would recommend not using trim in the landing phase. I get that it helps, I did it early on in my training, but at that phase you should really be power idle, lest hand on yoke and right hand on throttle ready to go around if need be.
Agree
Its a video game...
แปลเป็นไทยด้วย
That's awesome! I'd love to hear about the wraparound visuals
SUPER!!!
That is FABULOUS! I Love It! 🏆🥇👍👍
Thanks. ❤
This is just awesome. Great job
Nice 👍
I’m in the process of building one myself with G1000 cockpit. Good stuff.
thank you
That is sweet, I could only wish. Nice landing by the way!!
A pattern round at it`s best!
thank you
That is excellent well done
Amazing! I love that you have just steam gauges. As much as I would love to have a setup like this, I don't have room. VR is a nice alternative, though.
well done! enjoyed this video....
woooow :-D what a great job you made. Amazing :-D I love it. MNL airport .... more fun in the Philippines. January February back there I hope.
Nice one!
Great build except for keeping us in suspense. You’ve got to tell us how you set up those monitors/projectors. Incredible visuals. In guessing possibly projector in the front and large monitors on the sides. But, if so, how are they set up/synchronized?
That’s awesome! Really awesome build
thank you
She flew that complete pattern at no more than 500 feet agl. Fun in a sim but "no thanks" in real life. :-)
First thing I noticed.
woah that is awesome amazing build
hopefully in future comes with passenger seats too :D
positive landing. good job
I’m impressed, you could sell tickets to that sim!
I love that! I want one now!
Holy moly who needs to fly if you have this
That is Awesome Nice set up
Wow fanstastic cockpit you have thanks for scharing with us 😊
AMAZING!!! Great Job 👍🏻 WOW
Cool as a cucumber.
Wow awesome ❤❤
Wow!! This is the sort of rig that gets the National Transportation Safety Board knocking on your door inbetween rebooting the system after you stalled at takeoff and crashed into the sim scenery.
WOW !!! A very awesome home built simulator. Its every flight simmer envy ..I don't even wanna know the cost it would be too depressing LOL
That’s a very authentic sim! Please can you share details of the build, components used etc
thank you
Great job madam smooth landing Bravo
Hi I like your set. Did you set this up yourself? I am keen to have something like this in my home. Appreciate your advice. Thanks!
Hello! Yes we did it ourselves from scratch
Impressive
Hello, extremely impressive. Could you please let me know what monitor you are using? Thank you
Hello, extremely impressive. Can you please let me know what monitor you used? Thank you and best wishes
I was impressed with the build. You need to share your setup. Only a couple of things, 1 you only got to 500 feet and 2 where was the base leg. Rectangle circuit, not oval. Unless you are landing on an aircraft carrier. All in all quiet good. Thank you
very good, congratulations for the video and the piloting
That kid did a fantastic job of that better than me and I'm a pilot.
thank you
Beautiful simulator,, can you tell me what company you used for your glare shield lights
Really cool🎉 Congrats.
Ti saluto da Napoli Sud Italia sei molto brava ti voglio bene ciao BAI BAI ti AMO
Wow 😲😳
Wow, amazing build.
thank you
Ok, a few items to consider here. One being the center line. Next, no calls on the radio? Lastly was her simulated transponder on?
Very impressive!
I, and many others who posted want to know the construction details, which software are you using and where did you get the panel instruments and yoke.
Very nice! I want one !!! 👍🙋♂️🖖🏻
This is a great build. You really should share specs for this, or figure out a way to package and sell it. This is as good as any I’ve seen and think it would sell quite well depending on cost.
Nice!!!!!
I had a c150, it was the closest thing to a flight sim I could find
at NAIA!... ahayy miss going home but I really want to see how you set up your screen :D
LOVE EEETTT!!!!
お見事！
COOL BABY GOOD VERY GOOD
Simply SUPERB !!
thank you
Hello, great looking sim. I have a similar sim set up and I was wondering what program you use to set your screens up to where you don't see any of the instruments and exterior window frame and wings of the virtual plane? I am using MSFS 2020 for flight sim software. Thank you in advance for any help.
Good. 🌺
OMG that is so awesome
thank you
WOW!
good job
OMG! I so want one for my play room!!!
I want one!
เก่งมากจ้าขอชมนะ ที่ไหน บินได้แบบนี้
Great Build!!!!! 😍😍😍😍
thank you
great
It looks like it must be a real cockpit, since it even has the air inlets up in the corners of the windscreen.
I feel sorry for the Copilot! :) :) :) VERY nice job - VERY NICE!!!!!!
thank you
The best homemade simulator I have seen!
Could you please share us how you did this and cost?
thank you
Very nice :)
May I ask what you are using for the gauges? Software, etc
That is really cool I can imagine what it cost to build it.
I have only One question. Which simulator software did You use ?? I mean X-plane 10 or FSX ? BUt anyway, the best cessna 172 homemade simulator Iˇve seen.
Just Flight had a wonderful C-172 DLC, compatible on regretted FS9...
Still flying FSX SE, Prepar3D V1-2-3, Flight Sim World, Aerofly FS1-2, X-plane 11 etc.
CYUL
thank you
Indeed, Prepar3d V4.5 is a wonderful simulation platform.
So much user friendly, since it's DNA is from good old FSX SE.
So long from CYUL.
Hello, extremely impressive. What monitor did you use--
I am sorry my questions have gone into the replies section -- this is my first time
Thank you and best wishes
Can the simulator handle like a Star Wars X-Wing, a TIE-fighter? Great build! Also, how many computers are used? (You're hot!)
Looks like they actually used a 172 cabin/cockpit as a starting point. I'll bet that's easier than I used to think, due to all the abandoned ships out there waiting to be exploited.
Very nice...how many beamers did you use
Amazing job on the sim!! Adjust trim in the flare was something I've never seen before though, also I think you were max 500' AGL? Might want to watch out for bad habits
Can you share with us the build info. I would love to build one like yours. Please add a link to order the parts.
面白い！リアル！！
やってみたいなw
Next time please dial in major thunderstorms, and severe crosswinds.
Perfect weather for learning and be prepared (Prepar3D...).
Indeed, great set up.
thank you
Thank you very much for considering my requests.
CYUL
Nice job O7
thank you
can you show us more , how it's built etc ,
Passada com ela amei ❤
Waiting for a follow-up video, Please tell us how you built this.
Great job!!!!!! Can you give more info for the visual?
thank you
Yes please I have built one myself. But struggling very much with the visuals
omgggg how was it made????? woooooow impresive