Well mate that was first class. Ever part of video was so clear an very well explained. The last time I played with brake shoes was in the early 70s..But the only thing missing is how to adjust brake shoes to the drum .There used to be holes with a grommet in you could take out and using a screwdriver adjust them perfectly. How does the shoes self adjust to the drum..
jesus that`s a bull way of having to remove the damn thing on a swift :-s .. ty for the video, was about to go out and do it .. thinking it`s like any rear brake .. but noo no .. ty
Thanks very much , one trap is not resetting the auto self adjust and you wont be able to fit hubs .quoted cost in ripoff nz $750 to replace rear shoes only , I did it for $48nz plus my time . Cheers !!
Mate, $150-$250 to do a brake job at a garage, I rang one mob just for curiosity, $600 bucks Min, then the shop talk ABS etc, he finished with around $1200-1500 but that also depended on the model! They would have installed all the cheapest generic parts and tell the 'Customer' they used genuine parts! Thanks mate, for your vids, & uga duga, no need for a tourque wrench
Bad drum break leathers cause abs light to turn as my swift abs lights on and off some time and obd2 sensor shows error of both rear left right sensor i didn't understand whats an issue can you please suggest me something
Try looking under the right back floor trim that's where all the wires run sometimes the wire might brake just re join them if so Or replace the both right and left side the new ones always come with ready fitted brackets Hope that helps
Thanks for that video hav to do the change at weekend. The left Brake is stocked, think the pad came loosen and blocked the wheel fully. Will report when done.
Can you please do a tutorial on how to replace a thermostat for suzuki swift 2007? I'm very desperate as the only video I found was in foreign language and sub. Bad quality and not good enough camera angles
Thanks for this helpfull video. I will have to change my Ignis’ brakes next weeked. Did you just turn the handbrake lever down? Or do also have to loosen up the cable?
Hoping someone can help me - the girlfriend had her Swift in for an MOT and Service recently, the print out after the service said the rear drum brakes weren't inspected. Should they have been? I'd have assumed a service would need to check the brakes regardless of if they are discs or drums.
Cheers most times service will check the handbrake adjustment, The back breaks don't work 50.50 with front brakes some vehicles are 80.20 so no drama if they're worn-out
Hi Mate, good to see Aussie blokes on you tube. Working on this identical Suzuki, just up to 100k, ,2015 model), is it necessary to replace timing chain, also cooling expansion tank is always at half level, no obvious external signs of coolant leakage or overheating, with cooler climate in Melb, temp gauge always shows good (half guage), any advice Thanks, Jerry
Cheers JP for watching It is best to replace the timing chain if needed .they generally don't brake but the adjuster wears out Sounds like the header tank / overflow bottle is working fine if it's running hot from time to time or to cold change the thermostat Hope it helps
.Greetings from West Dunbartonshire, near Glasgow.
Great video, very straight forward and no messing about.
All the Best, John
@@johnkerr8019 thank John
Well mate that was first class. Ever part of video was so clear an very well explained. The last time I played with brake shoes was in the early 70s..But the only thing missing is how to adjust brake shoes to the drum .There used to be holes with a grommet in you could take out and using a screwdriver adjust them perfectly. How does the shoes self adjust to the drum..
Thanks Kevin
Yes they self adjusting no more screwdriver tricks just releas them .
Thanks for that. As I am showing my daughter how to change the rear breaks on her Swift and this will give her a good starting point.Steve U.K.
That's the best thing dads can do for their children teaching them life skills
jesus that`s a bull way of having to remove the damn thing on a swift :-s .. ty for the video, was about to go out and do it .. thinking it`s like any rear brake .. but noo no .. ty
Don't be shy just take your time you can do it
Cheers
with a pre-assembled kit it would be more practical
didn't know you could buy them
Spot on! Well needed refresher before I tackle the MOT jobs. Big thanks from Scotland 🏴
Glad it helped
Thanks very much , one trap is not resetting the auto self adjust and you wont be able to fit hubs .quoted cost in ripoff nz $750 to replace rear shoes only , I did it for $48nz plus my time . Cheers !!
I understand mechanics need to make money but some prices are ridiculous, I use TH-cam all the time to save money.
I glad I could help
Cheers Dave
Thanks grumpy sir, the vid explaination is so clear, and lots of detail into it, for every reason, why every part is there.
Thanks for the great comment 👍
Mate, $150-$250 to do a brake job at a garage, I rang one mob just for curiosity, $600 bucks Min, then the shop talk ABS etc, he finished with around $1200-1500 but that also depended on the model! They would have installed all the cheapest generic parts and tell the 'Customer' they used genuine parts! Thanks mate, for your vids, & uga duga, no need for a tourque wrench
It's robbery what they charge
For reference: 250 Euro with taxes (19%)
Bad drum break leathers cause abs light to turn as my swift abs lights on and off some time and obd2 sensor shows error of both rear left right sensor i didn't understand whats an issue can you please suggest me something
Try looking under the right back floor trim that's where all the wires run sometimes the wire might brake just re join them if so
Or replace the both right and left side the new ones always come with ready fitted brackets
Hope that helps
Good clear video, very helpful! Many thanks.
Thanks for the comment 👍
Thank you so much.. very helpful.. new subscriber now
@kiwidad5000 thanks for the support 🙏
@kiwidad5000 thanks for the support
I would really request and appreciate if you could also make a detailed video on replacement of Suzuki Swift Inlet Manifold and Thermostat...
Thanks for that video hav to do the change at weekend. The left Brake is stocked, think the pad came loosen and blocked the wheel fully. Will report when done.
Perfect I'm happy the video helps
Cheers
Helped a lot, prob solved!!! Thank a lot!!!
Can you please do a tutorial on how to replace a thermostat for suzuki swift 2007? I'm very desperate as the only video I found was in foreign language and sub. Bad quality and not good enough camera angles
Could you please also make a video of how to replace Swift Thermostat and Intake Manifold as well ?
Thanks for this helpfull video. I will have to change my Ignis’ brakes next weeked.
Did you just turn the handbrake lever down? Or do also have to loosen up the cable?
No just wind it back when the drum is off
Hoping someone can help me - the girlfriend had her Swift in for an MOT and Service recently, the print out after the service said the rear drum brakes weren't inspected.
Should they have been? I'd have assumed a service would need to check the brakes regardless of if they are discs or drums.
Cheers most times service will check the handbrake adjustment,
The back breaks don't work 50.50 with front brakes some vehicles are 80.20 so no drama if they're worn-out
What brand brake shoes did you buy for thirty odd bucks please?
hello sir..its the sama right for swift 2014?..after you put ever thing back together the drum brake will automicaly self adjust?.
Some models need to be adjusted manually, google your vehicle model ,
Cheers Dave
Do i need abs ring for that?
Should not need to replace if your model came out with it
@@grumpysgarage4387thank you❤
Hi Mate, good to see Aussie blokes on you tube. Working on this identical Suzuki, just up to 100k, ,2015 model), is it necessary to replace timing chain, also cooling expansion tank is always at half level, no obvious external signs of coolant leakage or overheating, with cooler climate in Melb, temp gauge always shows good (half guage), any advice
Thanks,
Jerry
Cheers JP for watching
It is best to replace the timing chain if needed .they generally don't brake but the adjuster wears out
Sounds like the header tank / overflow bottle is working fine if it's running hot from time to time or to cold change the thermostat
Hope it helps
Awesome tutorial, does the handbreak need to be positioned down during the process ? thank you.
Yes leave the handbrake of
Cheers
5 ugga dugga's sounds about right.
Close anuff for girls we date lol
Any chance of doing front wheel hub on 2007suzuki swift
Hi Craig I no longer have the Suzuki it's a popular car to work on I should buy another one and video heaps on it
Cheers Dave
Hi Dave,
Do you have a video on how to replace the front disc brake pads on my 2006 Suzuki Swift?
Thanks,
Daryl in Lilydale Victoria.
I can upload one
They are very easy as well
Cheers
@@grumpysgarage4387 Mate, that would be wonderful and much appreciated.
Thank you.
Hello, do you recommend to mill the drums?
Good job mate 👍 👏
Great video
Thanks a lot from Hamburg 😊
Your welcome cheers 🍻
My piston won't stay in
Take the cap of the brake master cylinder under the bonnet it .
Or the rubber boots covers might need replacing on the slave cylinder
Great explain
Thank you very much 😊
Very good man
Thanks for your comment much appreciated
Cheers