How to Replace Front Brake Hose 2009-2014 Ford F-150
ฝัง
- เผยแพร่เมื่อ 7 ส.ค. 2024
- Buy Now!
New Brake Hose from 1AAuto.com 1aau.to/ib/1ABRL00509
This video shows you how to install a new TRQ brake line engineered to fit your 2009-2014 Ford F-150. A leaking brake hose is bad news! Losing fluid, or getting air in the system can cause the brakes to weaken or fail completely. Old, dry rotted, cracking, or bulging lines are on the verge of breaking and starting a leak.
This process should be similar on the following vehicles:
2009 Ford F-150
2010 Ford F-150
2011 Ford F-150
2012 Ford F-150
2013 Ford F-150
2014 Ford F-150
🔧 List of tools used:
• 10mm Wrench 1aau.to/oYV/1AXAA00010
• 13mm Flare Wrench
• 10mm Socket 1aau.to/obhL/1AXAA00017
• 15mm Socket 1aau.to/obCA/1AXAA00015
• 22mm Socket 1aau.to/opA/1AXAA00266
• Pliers
• 1/2 Inch Impact Gun 1aau.to/ouM/1AXAA00252
• Ratchet 1aau.to/obG4/1AXAA00016
• Torque Wrench 1aau.to/oaK5/1AXAA00044
• Brake Fluid
• Brake Parts Cleaner
• Cloth Rags 1aau.to/oEA/1AXSS00035
• Gloves 1aau.to/oajo/1AXSS00048
• Safety Glasses 1aau.to/oacg/1AXAA00343
• Floor Jack 1aau.to/oaap/1AXAA00068
• Jack Stands 1aau.to/oXB/1AXAA00065
• Wheel Chocks
Subscribe: / @1aauto
For More Info visit us at 1aau.to/h/e8Y/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video. - ยานยนต์และพาหนะ
√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Visit-1AAuto
√ Do it Yourself
√ Save Money
This worked great. Thanks for the video. The front right brakes were not releasing. I went through a set of brake pads before seeing this video. I used WD40 on the upper line connection and had same issue with the line not breaking loose. I put some torch heat on it and worked it back and forth and it did release fine. Again thank you for this helpful video.
Wow I have a half twist on the upper line. Because the half round half hexagon fitting fit and the bracket is already installed, nothing to do but live with it.
Wowwww you’re the best
Did you reuse the copper washers or use new ones?
2007 ford El xlt expedition
My god this man used a gallon of brake clean