This video was more helpful than any of the others I've watched. Others say you gotta remove the pulley or the pump to change the hose. Thank you for explaining everything..
Very informative. I've seen about three other videos and questioned myself about little quirks of the removal process. But your video is clear and very step-by-step oriented. Good job!
very detailed video, good camera work, thanks. might be a good idea to apply transmission fluid to the new 19mm fitting with the gasket/washer before installation.
Thanks for helping us, specially for the bolt on the pump, and the flat & round seals. *edit* on 4,6l 2v, the upper bracket bolt is 10mm, cut the line going to the pump with a dremmel it's way easier, it took me several times to be able to clip the line into the socket bolt (pump) at least 12 times gently, brackets are easy to swap if you have a vise, no sensor.
√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money
This video was more helpful than any of the others I've watched. Others say you gotta remove the pulley or the pump to change the hose. Thank you for explaining everything..
Have watched several videos on replacement of this line and yours is without questions the most informative. Thanks!
Very informative. I've seen about three other videos and questioned myself about little quirks of the removal process. But your video is clear and very step-by-step oriented. Good job!
They dont sell this part without the fitting on it already.
very detailed video, good camera work, thanks.
might be a good idea to apply transmission fluid to the new 19mm fitting with the gasket/washer before installation.
Thanks for helping us, specially for the bolt on the pump, and the flat & round seals.
*edit* on 4,6l 2v, the upper bracket bolt is 10mm, cut the line going to the pump with a dremmel it's way easier, it took me several times to be able to clip the line into the socket bolt (pump) at least 12 times gently, brackets are easy to swap if you have a vise, no sensor.
Thanks for the walkthru. Was helpful with my job doing my 06!
How do i take the line out of the fitting with out damaging anything?mine came with the line in the fitting
Thanks- very helpful and a good tip to not start the truck before bleeding the rack!
Great video! I ordered one for my F150 but the line came with the fitting already attached. I had to remove the pump to make it work.
How do I get this part to replace it?
Can I buy the fitting separately?
+@adriantabullo9618 You may be able to locate the fitting at a local auto parts store.
How can l order this for my car
+Vicente Garcia Thanks for watching. Buy the part in this video on 1AAuto.com: 1aau.to/m/Shop-TRQ
You make it look too easy.