I've been use the Craftsman for about two years. I keep intending to upgrade it but it still works solidly and makes it hard to justify getting a new one. Also, while i use my Active gun when detailing, I happily use the stock gun for everything else. Its really nice. I put stainless steel quick connects on it and it works like a champ. I've also upgraded the hose of course as soon as I bought it. I'll probably upgrade to the Active 2.3 in a year or so.
The stock gun is surprisingly good. Best trigger feel of any stick gun I have ever tried. I’ll be getting my 2.3 in the next few weeks to put to the test.
I had this pressure washer and the wand hose got stuck, connected to the pressure washer outlet. Couldn't get it to loosen for anything. I ended up snapping it off where the plastic meets the metal threaded joint. A family member of mine who had the same model had this happen to them as well. They opted to just leave it assembled. In hindsight maybe I should've done the same, or used some sort of quick connect fittings. Other than that it worked great.
@@xtaytoex Pressure washer was off and the line relieved of pressure? I know if not relieved of pressure they will be very hard to get off. Quick connects are nice, but it shouldn’t get stuck regardless. I’ll keep an eye on it been using it a few times in foam cannon testing videos.
Great video. Been using the Greenworks for 4 years and love it! I have the Ryobi as well but have yet to open it. Got the Ryobi for $69 on Black Friday and only bought it as a replacement but the Greenworks has been a Champ!!!
They are all great machines. Had a Greenworks and Ryobi for years. The sounds have changed a little probably changing suppliers for motors and pumps. That was a great deal!
I'm by no means a professional detailer, just like to keep my new vehicle looking clean. My only pressure washer was a 20-year old Toro gas-powered that's way too strong and way too noisy. I opted for the Ryobi 1800 a few months ago and its more than adequate for detailing. Can't speak for the others, but the Ryobi required a thread adapter on the water out nipple to convert from M22-15 to M22-14, which allowed me to use other attachments (went with McKillans foam cannon, swivel handle, etc.). I also picked up a 35 foot long flexible pressure hose and the Ryobi has no problem pumping through that much hose. Very satisfied so far. Got it on sale for less that $100 at HD.
Glad that it worked out for you! Ryobi is most people’s first electric pressure washer and they work well. Weird you had to convert 15mm to 14mm. Every Ryobi I have ever tried is always 14mm as that is what Home Depot sells their adapter sizes at.
My best friend and I both bought the Ryobi the same day at Home Depot . After three months of use , my friends blew the power switch out of the machine and sounded like a shotgun being fired . About a month after that , mine did a similar switch explosion except mine smoked where the switch was formerly located and actually caught fire. They were both under extended warranty and were both replaced , but they are sitting in the boxes in our sheds not used . We actually purchased Craftsman washers as replacements, his like in the video , and I bought a frame style. We haven't had any further issues. I couldn't, in good faith, recommend the Ryobi as two separate units blew the switches out.
Wow, this is the first I have heard of this could be the newer models and they changed something to get parts cheaper or tried to improve something. My Craftsman has been working quite well so far.
@CarsWithKeav I had an older Ryobi, and it just died of old age . That's why I bought another one . My friend was buying his first pressure washer and got one . We both had similar issues with the same model , I figure that they must have cheaped out on parts . The switches felt cheaper . I searched the internet to see if it was an existing problem , if it is , Ryobi is keeping it hush hush.
@@Special.Purpose.Weapon They shop parts all time for cost savings and supply chain issues. They do the same with the pumps and motors which is why one year it may sound different than the next years model.
Its been about three months and so far no issues with my Ryobi. I only paid $95 for it at HD...if it craps out after a year or so spending another $95 or so for a replacement won't really break the bank. A buddy of mine went overboard and bought a Kranzle for $1400 but that's ridiculous in my opinion. Even the Active 2.0 and 2.3 aren't bullet-proof and are having issues.
@@photog1529 Wants and needs. Some want more and others just get by with what they need. Not everybody is a “need” person on everything though. I like my gadgets and high end pressure washers, but don’t give a crap about clothes, shoes, coffee, alcohol, etc. others will be opposite or some variation.
@@KingTheDetailer The Harbor Freight Portland did the same. The old one I had didn't squeal, but the new one I tested a few months ago had the same sound as this Ryobi. Maybe they changed the pump supplier or its the start/stop pressure switch.
Great battle between this group. This is the range I currently have, one from Amazon. It's been working great but will upgrade at some point. Size and performance is a factor, but I like the detail review you provide. It's awesome.
Thanks for your review. When I purchased my last pressure washer, and did my homework, most electric PW were made in China. I always wanted one powerful enough do complete multiple projects around the house. I did find one not made in China, works well for car washing & cleans concrete, decks & siding etc. Plus I didn't want to break the bank.
@@newmarketems3510 Not sure I’ve been abusing my Craftsmen in video testing and it runs well. If it’s outside of return policy then you would have to contact the manufacturer for warranty issues.
Thanks. I've been using the Craftsman and the Sooprinse Gun for a little over 2 years now. Love them both but curious how much quieter you feel the Greenworks was?
It’s considerably quieter. Which is weird as the one I had before sounded more like the Craftsman. Same with the Ryobi my old one didn’t do that squeal. Feels like these companies change around the motors and pumps depending on what is available and cheap to use.
Used the Ryobi for the first time yesterday to clean my fence. I bought the Flexzilla 50ft hose to match. No complaints. I've also purchased an Active short gun and MJJC foam cannon. Do you recommend buying the 2.5 or 3.0mm tips or both? I was looking at the Ridge Water set of guarded tips on Amazon. Thanks!
Sounds like a great setup. I myself like to carry both sizes so if the car is dirtier I’ll run the higher pressure 2.5 and 3.0 when it’s cleaner or you could use both in the same wash. 2.5 for initial rinse and the 3.0 for the final rinse. Check out the Fixfans nozzles as well they are nice. Rubber is soft and pliable and smaller in size.
@@CarsWithKeav Luckily the sets aren’t too pricey. I finally got to use my Ego 765 a few days ago. I had upgraded from an old low output Ryobi, which I owned for about 10 years. Wow! I was impressed how dry my vehicle got, especially in the crevices of the lug nuts. Paired with the 2.5ah battery and Ego brand short tube, it was a pleasure to use. Thanks for helping us detailing fiends out!
Smaller, less exposed metal, rubber is very soft and pliable, size of nozzle is printed on the side in big letters. The only bad thing is it looks to be a single unit with no ability to change the nozzles to different orifice sizes.
My Ryobi (after one year) just gave out. It didn't power on (although the plug was lit green) the last time I went to wash the car. I guess I'm looking for a replacement now.
That sucks usually they last much longer. Do you live in a cold area during the winter and if so was it winterized before storage. Just thinking of things that could cause it to do that.
Love the video and bought the craftsman based of your recommendation, the bear foam cannon and the quick disconnect. My question is, what is the 1.07 thing you talk about? Is it a part? First time buying pressure washer and I loved the set so I want to match it as much as possible. Hopefully to hear a reply so I know what that 1.07 is.
It is the orifice inside the foam cannon. They are usually 1.1mm in size, but their manufacturing tolerances are never accurate so mine measured at 1.07. That is a great size for a Craftsman and will get great foam without stressing the machine too much. If you decrease the size to say .99 that causes more pressure which will increase load on the machine stressing it. The bigger the hole less stress, but if the hole gets too big there won’t be enough pressure to make good foam. Hopefully I didn’t confuse you more. 🤣
@@CarsWithKeav Thank you for the reply and yeah that makes total perfect sense. I just received my foam cannon and just swapped the orifice out for the 1.1mm that was provided by them. Thank again! Got a new sub.
I always prefer MJJC foam cannons. They can be a little expensive though so the Bear Force Foam Cannon is a cheaper alternative. With these pressure washers you can use a 1.1 orifice and with that you can use any foam cannon and get good foam.
I'm really considering the WESTINGHOUSE EPX3100V. I have the ryobi 1800 and it surges alot. A ton of videos on the ryobi but not much on the WESTINGHOUSE EPX3100V. What do you think. Love the color too
I have enjoyed your channel but being in Australia many of the product are unavailable to me. What pressure washer could you recommend for about $150 USD? appreciate your comment.
Another hard part for me is I don’t know what is available in Australia as some brands that are cheap here can be higher there due to import fees and taxes. Do they sell Karcher there? They always have good products. I know in the U.S. there isn’t much in the $150 range except a few Karchers everything else is much more expensive or these cheaper ones in this video.
Thanks for this awesome and very informative review, great info and detail yet all to the point. Was the pop at the end of the westinghouse rundown a concern? Seems alarming
Not alarming I have the unit away and the current owner loves it. It think it’s a bit of blowback and most likely due to my higher than normal water hose flow and pressure.
Thank you so much for this video. It helps me a lot who is new for car washing at home. can you recommend right orifice size for this ryobi washer? for 40 degree. I am thinking 40 degree 4.0 orifice for safe use.
After 6 months my ryobi is giving up on me. First the motor won’t stop running when not releasing water. And now the motor over heats and turns off automatically and causes the break on the electric cord to shut off, any suggestions?
They do have a 3 year warranty so I would look I to that. If it was running in its own possibly a leak somewhere enough to where it can’t reach it’s set pressure to turn off. Gun, pressure washer and hose could all have a leak. Not much else other than a bad pressure switch could cause that.
I’m an idiot when I bought my karcher 1800 thinking it had the quieter motor. I think it might have been their one 1900 model. I can’t justify 600 or 700 for basic car washing but would love something a little quieter.
No need to change you have a good machine these are all very close and share many of the same components. I wouldn’t upgrade unless moving to an Active pressure washer or something like that.
On the craftsman handle that it comes with, can you take off the wand and easily twist on a wand with a foam cannon attachment? like the ones they sell at harbor freight?
You could I’m pretty sure it’s the same type of fitting. Still cheaper and better to do the adapter I showed as the wand you would put on just make the whole gun longer and very weighted at the end with the foam cannon attached.
@@CarsWithKeav I already have the foam cannon attachment that's why I was asking bc I didn't want it to go to waste it's a very good foamer and just twists right in like the normal wand would and you can adjust the thickness and spray pattern, my power washer broke at the hose fitting where you tighten it it got stuck somehow and while i was trying to loosen it the whole thing just snapped the plastic inside holding the fitting together lesson learned just get the quick connects for everything not just the garden hose side
@@CarsWithKeav that's the one I had and the front hose fitting and the hose fitting that tightens onto the threads got stuck, I got it off then tried to re tighten it, it got even more stuck then the whole threaded part on the washer broke from the inside, because it's all plastic holding stuff together in there, can you tell me what the quick connect specs are for the hose attachment not the garden hose one I already have that
@@PrincessAddie14 it’s hard to say in the Portland they change sizes every few years when they switch out pump manufacturers. They are usually 15mm m22, but could be 14mm. Sometimes it’s best to buy 14mm m22 quick connect and then get a 15mm to 14mm adapter. Makes things easier as 14mm is a standard size you find at Home Depot or Lowe’s as well.
I just bought a craftsman 1700psi pressure washer, but I read some reviews that say it breaks down after a short time is that true or not? The reviews in Amazon are positive and the washing machine has 4.5 stars, I'm confused, it cost me $200 because of shipping to Saudi Arabia and I didn't have Amazon Prime, so a delivery fee has been charged
Mine is working just fine I know several people Who have had for years. There will always be some bad reviews they are usually the most vocal so it makes it sound worse than it actually is. No manufactured product will have a perfect track record there are always a few bad ones.
@@CarsWithKeav I meant is the 1800 better than the 1700? The craftsman 1800 is like $99 now at Lowe’s . I really want to get one soon for starting detailing just confuse what to pick, and I see most people getting for ryobi Thank you
@@Mo-nj4yi They are all about the same most are just picking based on popularity and availability. Ryobi being at Home Depot is mainly why it’s more popular. I picked the Craftsman as I like that the water inlet is on the side and not the back.
that shiny jacket is PVC thermoplastic. The matted cable is probably neoprene rubber. The jacket lettering should tell you what it specifically is. Remember the episode of the Simpsons where all these restaurants had a conveyor belt to an underground meat pit with the same all purpose meat for everything? That applies to these pressure washer.
For sure does feel all the same. Not necessarily exactly the same parts, but I feel they all pull from the same parts bins which is why the Ryobi is squealing now when it didn’t before and the Greenworks is quieter now and was. It before. They probably change around based on availability and price. The Portland from Harbor Freight was the same old one was great and new one squeaked. Thanks for the knowledge on the cable coatings as well.
@@CarsWithKeav They seem to follow the HF model of having the same product but choosing different suppliers based on price and or availability. I know the original Ryobi sold their power tool business to a TTI awhile ago and it's not the same Ryobi that was based in Japan.
@@emp0rizzle Very true and I noticed the Portland Harbor freight the pump sound was different with the two models I had that were years a part just like the Ryobi and Greenworks.
I couldn’t get the 1/4” adapter you showed in the video to work on the craftsman pressure washer. I tried twisting it on like you showed, but it didn’t work. Any suggestions?
Yeah, they just seem to not all be perfect the adapter and the spray guns. It takes some force sometimes. Some have said a pair of pliers helped. Sorry if it didn’t work.
Got it at Home Depot Online. Amazon raised the price and so did Home Depot. It is $125 at HD right now. www.homedepot.com/p/Westinghouse-2100-PSI-1-76-GPM-13-Amp-Cold-Water-Electric-Powered-Handheld-Electric-Powered-Pressure-Washer-and-5-Quick-Connect-Tips-ePX3100v/325115831
I’m looking for an electric just for when I do the wheels because I’ve had my craftsman gas for the last 4 years but I don’t leave it on while I clean so I turn it in and off about 5 times during my wash and now I kinda want electric to go with just an auto start stop and I’ve had electric before but of course gas is the best for other than car detailing and that’s why I have the gas. I saw a Worx one on Amazon for 100 and I wanted to get it but I want to see which one in this video does the best.
Just about any of the better known names in this price range will do the same performance it really comes down to what design you like. The subtle differences like water input location made me choose the Craftsman.
It’s a universal adapter just keep in mind it being universal it might take a bit of force to get it to attach. Many have commented this, but mine works fine just the manufacturing tolerances are not very consistent. amzn.to/3yXJew4
I mean if your car is ceramic coated and you have a strong enough soap that’s for sure possible. Caked on road grime usually requires a contact wash to get 100% clean. If it’s not coated there is usually no way to Touchless wash as the dirt just kind of bonds to the clear coat. You could get it relatively clean, but some visible dirt would still be there.
How did you manage to get the STYDDI Pressure Washer Gun Adapter On the Craftsman? I bought it and the adapter to make the gun shorter but it doesn't go in. The one that comes with the gun spins and locks in place but the aluminum one to make the gun shorter is awful I've been struggling with it for 30 min
Mine just takes a little force down then make the turn. Sometimes a pair of pliers helps, but it goes in there. Wonder if manufacturing tolerances vary on the gun itself and on the adapter that is made.
@@CarsWithKeav I managed to get it in there but had to step on the gun with both feet and use a wrench to get it in there. That was awful. Lol will give it a try this coming weekend. Thanks for the review, bought the Craftsman because of your video lol
My ryobi finally is giving out , i have to punch it for the pump to turn on lol. Might n be gettting the graftman but i mean for 100$ cant really complain held up 2 years of preety much everyday use
These companies shop around their parts suppliers even in the same year you could have different pump sounds. My previous Ryobi did not sound like this and this Ryobi sounds like my old Greenworks. 🤣
My Ryobi gets almost the same numbers as yours. 2.0 Nozzle 1400PSI at 1.23GPM. 2.5 Nozzle 1100PSI at 1.35GPM. 3.0 Nozzle Dont have cant test. 3.5 Nozzle 750 PSI at 1.53GPM. 4.0 Nozzle Didnt Bother to test.
They are very consistent machines. I feel that 3.0 is the best for car washing. Nice to see others testing the numbers instead of blindly trusting these companies.
@@CarsWithKeav Imma try the Hypertough 5pk nozzle at walmart see if I can get a little more pressure than a 3.0 nozzle while still delivering a least 1.4GPM because those hypertough nozzle are a 2.9 and im a little curious about it.
@@TheManMiscellaneous Off sizes are always nice it’s those little adjustments that can get you what you want. Active always ships their pressure washers with 3.7 and 4.6 which are nice off sizes to have for other testing.
@@TheManMiscellaneous that’s the hard part are they really what they say they are you can use a pin gauge, but it only works on the 0 degree as the other degrees are not perfect circles to measure.
Mine fit it pretty easily takes a bit of force to push down and turn. They made these to fit so many different types and the plastic guns all seem to have different tolerances. I know a few needed to use a pair of pliers to force the turn.
I really like the Craftsman been using it in many videos for testing products. If wanting to play it safe the Ryobi is used by many mobile detailers and is known to be pretty reliable. The Westinghouse is the only one I don’t know about durability. All the others are a solid choice.
I've been binge watching for a few months. Retired and need a new hobby. Enjoy for the outtakes, makes you real. Congrats, I see you recently passed a YT subs threshold. Would it be easier to have a spreadsheet to screenshot instead of rattling all those numbers. Then again you wouldn't have as many outtakes.
I’m one of those people that never writes anything down and calls numbers just off memory. I probably should have some kind of spreadsheet, but Matt from Obsessed Garage already has a very detailed one out there on most of these pressure washers. Thank You for watching!
I am puzzled what the Westinghouse unit is doing each time it shuts off? I hear the motor wind down, but then there is a weird pop and the whole unit jumps. What's going on there?
When I was editing I thought the same. I think it has a very abrupt pressure switch and might be at a higher psi which make it jump like that. Greenworks was doing the same, but far less.
@@CarsWithKeav I had originally bought the Westinghouse unit but sent it back before even opening it after watching your review and seeing how it behaved. I ended up getting the Greenworks unit, but I think I might send that one back too. I tried it and it has a similar pop like you said. I am not sure exactly why, but it really bugs me when I used it. Maybe I should just bite the bullet and spring for an Active 2.0. Everything points to it being a much more solid unit. For these machines, it seems like you get what you pay for?!
@@marchenkel4782 If you want to save a little the VE52 is also an option at $199. Active 2.0 will last longer due to the parts used, but its only a 5% increase in performance.
This one amzn.to/3vLFE6H It’s not cheap, but the reviews are the best I see for a pressure gauge. Would still need to build an adapter to work with the spray gun.
Hope so. All I got to say is I’m not testing 4 at a time anymore. That’s way too much work kept confusing myself. 🤣🤣 Could have milked this into 4 different videos, but not worth it.
That Westinghouse is just a repackaged and branded Sun Joe. Never buy Sun Joe. They are junk, don’t last long and the company doesn’t stand behind them, just try to sell you a new one…never again. As Matt M proved in his massive pw test, under $200 only buy the Ryobi or Karcher cube depending on how much you want to spend. I’d happily use the Ryobi, but I’m sticking with the Karcher considering I have a 20 year old one that still works and I keep it as a backup in case one I have stops working in the middle of a wash.
Thanks for the reply. I would like to put this on a shelf in my garage right above the water supply, then connect to a 75-100' reel so I don't have to ever move it.
Sometimes it takes a pair of pliers to help push down and turn. A lot of these guns the slots are sometimes not cut exactly the same and the adapter works for many brands so it’s not a perfect fit. Good thing is once you get it on you won’t need to take it off.
It is the best I did a video on it a few months ago other problem is the newer ones seem to make a squeal sound as well. The amount you save if on sale is more than enough to buy an adapter or some upgrades.
Looks to be end of the month. They announced pre-orders will start shipping on the 22nd. Somewhere between the 25th and 28th most likely. They are sending me one and I bought another one just to see which one gets here first. I’ll give one away at 20k subs.
Could you explain exactly what you mean by extended foam nozzle? Maybe a timestamp of when I talk about it. Just wanting to make sure we are talking about the same thing.
@@jamesblanks4747 There is a longer attachment in the box that will allow you to hook up the foam cannon I used. I also show a shorter version in the video that will allow you to do the same and the gun not be so long. There is a soap blaster than comes with it I just don't like it so use my own.
@@bluebloodmanny Kind of hard to say I hate a Ryobi as I have over 100 of there tools and used their older model pressure washer for several years before. Just nice to have something different that made a few design differences I like.
I knownothing about preasure qashera. I just bought a new car. I was looking for recommendations. I fpund it. But I now have NO IDEA WHAT YOU ARE TALKING ABOUT NOZZELS?? 30, 20, 40?? WTF??
So the size of the nozzle like a 2.5 or 3.0 is the size of the hole which determines the pressure and flow. The smaller the hole the more pressure, but less water flow and vice versa for the large hole. When it comes to these especially for car washing there is a sweet spot around 1000 PSI which gives you more water flow which makes rinsing easier and it’s not enough pressure to harm the painted surface. The nozzle degree which is 0,15,25,40 and usually come colored red, orange, green and white. These are the patterns the lower the degrees the narrower the pattern and that increases the impact as it a concentrated spray. Going to the bigger degrees such as 25 and 40 which is recommended for car washing the pattern is perfect for rinsing and not harming the surface.
Good thing we have so many choices out there. I myself have never had a problem with any Ryobi product. Power tools I use a little bit here and there so I don’t abuse them, but the lawn equipment I put through the ringer and they keep going. Still have several tools from back when they were blue and not green. 15 years old at least. Now if I used them as a business like construction or mechanic I would most likely run a higher end brand. Crazy thing though Vaughn Gittin Jr. and his RTR race teams use Ryobi.
i just use my thumb to create pressure from the water hose. works great washing my car. cost. Sore thumb. The ONLY reason to get a pressure for washing your car is for foam guns which do a better job at creating foam not suds.
We all have our ways and pressure washers are a want vs a need and I want them. I try just a garden hose every now and then and the effificiency of the pressure washer and it’s ability to clear soap residue it’s something I can’t give up. It does clean better as well after the pre-soak as it get more grime and debris off which will have less contamination in your contact wash. Some people like Starbucks and I don’t drink coffee, but I’ll splurge on a pressure washer I can use over and over and not throw away.
I've been use the Craftsman for about two years. I keep intending to upgrade it but it still works solidly and makes it hard to justify getting a new one. Also, while i use my Active gun when detailing, I happily use the stock gun for everything else. Its really nice. I put stainless steel quick connects on it and it works like a champ. I've also upgraded the hose of course as soon as I bought it.
I'll probably upgrade to the Active 2.3 in a year or so.
The stock gun is surprisingly good. Best trigger feel of any stick gun I have ever tried. I’ll be getting my 2.3 in the next few weeks to put to the test.
I also have been using the Craftsman..recently upgraded to the Active 2.0…Craftsman is a definitely a good back up power washer.
@@MagicMikesDetailing Agreed, great backup.
I had this pressure washer and the wand hose got stuck, connected to the pressure washer outlet. Couldn't get it to loosen for anything. I ended up snapping it off where the plastic meets the metal threaded joint. A family member of mine who had the same model had this happen to them as well. They opted to just leave it assembled. In hindsight maybe I should've done the same, or used some sort of quick connect fittings. Other than that it worked great.
@@xtaytoex Pressure washer was off and the line relieved of pressure? I know if not relieved of pressure they will be very hard to get off. Quick connects are nice, but it shouldn’t get stuck regardless. I’ll keep an eye on it been using it a few times in foam cannon testing videos.
My Ryobi is on the way out. So this video came at the right time.
Hope I could help.
Great video. Been using the Greenworks for 4 years and love it! I have the Ryobi as well but have yet to open it. Got the Ryobi for $69 on Black Friday and only bought it as a replacement but the Greenworks has been a Champ!!!
They are all great machines. Had a Greenworks and Ryobi for years. The sounds have changed a little probably changing suppliers for motors and pumps. That was a great deal!
I'm by no means a professional detailer, just like to keep my new vehicle looking clean. My only pressure washer was a 20-year old Toro gas-powered that's way too strong and way too noisy. I opted for the Ryobi 1800 a few months ago and its more than adequate for detailing. Can't speak for the others, but the Ryobi required a thread adapter on the water out nipple to convert from M22-15 to M22-14, which allowed me to use other attachments (went with McKillans foam cannon, swivel handle, etc.). I also picked up a 35 foot long flexible pressure hose and the Ryobi has no problem pumping through that much hose. Very satisfied so far. Got it on sale for less that $100 at HD.
Glad that it worked out for you! Ryobi is most people’s first electric pressure washer and they work well. Weird you had to convert 15mm to 14mm. Every Ryobi I have ever tried is always 14mm as that is what Home Depot sells their adapter sizes at.
Thanks for using DIY Detail Incredible Suds
Always!
Great review. I started with the craftsman it’s still rocking. Well beyond 100 hours life expectancy. Love ur content 😊
I kind of like it they did things a little different and it stuck out among all the other clones.
Don’t forget them karcher cubes! I got mine for 80 bucks on prime day. Great little machine and they’re extremely quiet
They are awesome, but the $80 prime deal may never happen again. They are usually like $150.
My best friend and I both bought the Ryobi the same day at Home Depot . After three months of use , my friends blew the power switch out of the machine and sounded like a shotgun being fired . About a month after that , mine did a similar switch explosion except mine smoked where the switch was formerly located and actually caught fire. They were both under extended warranty and were both replaced , but they are sitting in the boxes in our sheds not used . We actually purchased Craftsman washers as replacements, his like in the video , and I bought a frame style. We haven't had any further issues. I couldn't, in good faith, recommend the Ryobi as two separate units blew the switches out.
Wow, this is the first I have heard of this could be the newer models and they changed something to get parts cheaper or tried to improve something. My Craftsman has been working quite well so far.
@CarsWithKeav I had an older Ryobi, and it just died of old age . That's why I bought another one . My friend was buying his first pressure washer and got one . We both had similar issues with the same model , I figure that they must have cheaped out on parts . The switches felt cheaper . I searched the internet to see if it was an existing problem , if it is , Ryobi is keeping it hush hush.
@@Special.Purpose.Weapon They shop parts all
time for cost savings and supply chain issues. They do the same with the pumps and motors which is why one year it may sound different than the next years model.
Its been about three months and so far no issues with my Ryobi. I only paid $95 for it at HD...if it craps out after a year or so spending another $95 or so for a replacement won't really break the bank. A buddy of mine went overboard and bought a Kranzle for $1400 but that's ridiculous in my opinion. Even the Active 2.0 and 2.3 aren't bullet-proof and are having issues.
@@photog1529 Wants and needs. Some want more and others just get by with what they need. Not everybody is a “need” person on everything though. I like my gadgets and high end pressure washers, but don’t give a crap about clothes, shoes, coffee, alcohol, etc. others will be opposite or some variation.
I've had the Ryobi for 2 years no problem, great video as always
Great machine, had one for 3 years before moving on to Active. My old one didn’t squeal though does yours?
@@CarsWithKeav not like the one in the video , no
@@KingTheDetailer The Harbor Freight Portland did the same. The old one I had didn't squeal, but the new one I tested a few months ago had the same sound as this Ryobi. Maybe they changed the pump supplier or its the start/stop pressure switch.
@@CarsWithKeav it could be , once I'm ready to buy another small electric pressure washer I might give something else a chance
Great battle between this group. This is the range I currently have, one from Amazon. It's been working great but will upgrade at some point. Size and performance is a factor, but I like the detail review you provide. It's awesome.
These types of pressure washers are more than enough for most.
Keav appeared to be very careful handling that BearForce foam cannon. Must not have wanted to accidentally drop it. LOL!
Two hands is safer. 🤣 The bear force did survive the empty drop tests.
Thanks for your review. When I purchased my last pressure washer, and did my homework, most electric PW were made in China. I always wanted one powerful enough do complete multiple projects around the house. I did find one not made in China, works well for car washing & cleans concrete, decks & siding etc. Plus I didn't want to break the bank.
Most everything is made in China and if not it would be Malaysia or Thailand. Which pressure washer did you choose if I may ask?
@@CarsWithKeav I chose a unit from Greenworks, bought during a cyber sale.
whats the name of the American made pw?
@@bayoumanbryan I did not say it was made in the USA.
Enjoyed this video, on the market for a cheap pressure washer and your video was one of the most structured and well thought out. Thank you Sir
Appreciate the kind words!
And also enjoyed the bloopers 😂 i relate so much to the achy knees lol
@@WazZappening They make very concerning noises too don’t they? 🤣
Timely video. Currently looking for a pressure washer in this class. Was gonna go with the Ryobi, but now considering the Craftsman. 🤔
You can’t go wrong with any of them so no wrong decision. Ryobi squeal was annoying which is weird as the older version never did that.
I'm still on the fence .I ran some reviews on Lowes site and any issues per reviewer says Lowes sends you Craftsman to deal with.
@@newmarketems3510 Not sure I’ve been abusing my Craftsmen in video testing and it runs well. If it’s outside of return policy then you would have to contact the manufacturer for warranty issues.
I just got the Ryobi and quite happy with it. It seems to be quieter than the Craftsmen while running from what I can hear in your test.
You can’t go wrong with the Ryobi it’s the popular choice.
Thanks. I've been using the Craftsman and the Sooprinse Gun for a little over 2 years now. Love them both but curious how much quieter you feel the Greenworks was?
It’s considerably quieter. Which is weird as the one I had before sounded more like the Craftsman. Same with the Ryobi my old one didn’t do that squeal. Feels like these companies change around the motors and pumps depending on what is available and cheap to use.
Also, great comparison video. Didn't waste any time and still had a lot of info.
Appreciate that. You wouldn’t believe how much I cut out. I start talking and ramble on. When editing I keep yelling at myself to shut up. 🤣
Those ryobis are tanks!💪
Agreed, I abused one for years only issue was having to replace the GFCI plug.
Great review Keav! Thank you for all your work.
You’re welcome
Used the Ryobi for the first time yesterday to clean my fence. I bought the Flexzilla 50ft hose to match. No complaints. I've also purchased an Active short gun and MJJC foam cannon. Do you recommend buying the 2.5 or 3.0mm tips or both? I was looking at the Ridge Water set of guarded tips on Amazon. Thanks!
Sounds like a great setup. I myself like to carry both sizes so if the car is dirtier I’ll run the higher pressure 2.5 and 3.0 when it’s cleaner or you could use both in the same wash. 2.5 for initial rinse and the 3.0 for the final rinse. Check out the Fixfans nozzles as well they are nice. Rubber is soft and pliable and smaller in size.
@@CarsWithKeav Luckily the sets aren’t too pricey. I finally got to use my Ego 765 a few days ago. I had upgraded from an old low output Ryobi, which I owned for about 10 years. Wow! I was impressed how dry my vehicle got, especially in the crevices of the lug nuts. Paired with the 2.5ah battery and Ego brand short tube, it was a pleasure to use. Thanks for helping us detailing fiends out!
Yeah, these things move some air. For yard work as well its a big difference.
Keav: What do you like more about the Fixfan's nozzles over the Ridge nozzles? Thanks. Always look forward to your videos!
Smaller, less exposed metal, rubber is very soft and pliable, size of nozzle is printed on the side in big letters. The only bad thing is it looks to be a single unit with no ability to change the nozzles to different orifice sizes.
Cars with Keav is the best!
Appreciate that!
Great comparison!!! Love your videos!!! Thank you for the open and honest demos!!
You’re welcome
My Ryobi (after one year) just gave out. It didn't power on (although the plug was lit green) the last time I went to wash the car. I guess I'm looking for a replacement now.
That sucks usually they last much longer. Do you live in a cold area during the winter and if so was it winterized before storage. Just thinking of things that could cause it to do that.
The end was great lmao.. I've been trying to decide on a budget pressure washer. Going with the Ryobi. thanks
You’re welcome!
Love the video and bought the craftsman based of your recommendation, the bear foam cannon and the quick disconnect. My question is, what is the 1.07 thing you talk about? Is it a part? First time buying pressure washer and I loved the set so I want to match it as much as possible. Hopefully to hear a reply so I know what that 1.07 is.
It is the orifice inside the foam cannon. They are usually 1.1mm in size, but their manufacturing tolerances are never accurate so mine measured at 1.07. That is a great size for a Craftsman and will get great foam without stressing the machine too much. If you decrease the size to say .99 that causes more pressure which will increase load on the machine stressing it. The bigger the hole less stress, but if the hole gets too big there won’t be enough pressure to make good foam. Hopefully I didn’t confuse you more. 🤣
@@CarsWithKeav Thank you for the reply and yeah that makes total perfect sense. I just received my foam cannon and just swapped the orifice out for the 1.1mm that was provided by them. Thank again! Got a new sub.
Great review! Which soap brand is it u said u use in the foam cannon? Tried to find it in your links and guess I’m just missing it. Thanks.
DIY Detail is the brand and CARSWITHKEAV saves 10%
Wow, great video. Thank you.
What kind of foam generator do you recommend for this washer? In your video it makes a very good foam.
I always prefer MJJC foam cannons. They can be a little expensive though so the Bear Force Foam Cannon is a cheaper alternative. With these pressure washers you can use a 1.1 orifice and with that you can use any foam cannon and get good foam.
@@CarsWithKeav Thank you 🤝
I'm really considering the WESTINGHOUSE EPX3100V. I have the ryobi 1800 and it surges alot. A ton of videos on the ryobi but not much on the WESTINGHOUSE EPX3100V. What do you think. Love the color too
You can't go wrong with any of them really. I think its all which one meets the color scheme you are going for.
@@CarsWithKeav exactly. The color why can't they make them in any color right
@@Ernestosgarage Marketing team wants those logo colors.
I have enjoyed your channel but being in Australia many of the product are unavailable to me. What pressure washer could you recommend for about $150 USD? appreciate your comment.
Another hard part for me is I don’t know what is available in Australia as some brands that are cheap here can be higher there due to import fees and taxes. Do they sell Karcher there? They always have good products. I know in the U.S. there isn’t much in the $150 range except a few Karchers everything else is much more expensive or these cheaper ones in this video.
Great review Keav! For the Westinghouse would you use the 2.5 for the 1100psi or the 3.0 at the 900ish?
I’m a 900 kind of guy.
Excellent video. Answered every possible question I had. Great job.
Appreciate that!
Thanks for this awesome and very informative review, great info and detail yet all to the point. Was the pop at the end of the westinghouse rundown a concern? Seems alarming
Not alarming I have the unit away and the current owner loves it. It think it’s a bit of blowback and most likely due to my higher than normal water hose flow and pressure.
I just bought a Westing house epX3100 from Amazon. Got a good deal on it. I'm gonna use it with my MJJC v2 cannon and my mckillans gun.
Awesome, hope you makes car washing more fun!
Thank you so much for this video. It helps me a lot who is new for car washing at home. can you recommend right orifice size for this ryobi washer? for 40 degree. I am thinking 40 degree 4.0 orifice for safe use.
I use the 3.0 with a Ryobi as the 4.0 is going to be way to low in PSI. 3.5 would be the lowest to go. Best of both worlds is the 3.0 for me.
After 6 months my ryobi is giving up on me. First the motor won’t stop running when not releasing water. And now the motor over heats and turns off automatically and causes the break on the electric cord to shut off, any suggestions?
They do have a 3 year warranty so I would look I to that. If it was running in its own possibly a leak somewhere enough to where it can’t reach it’s set pressure to turn off. Gun, pressure washer and hose could all have a leak. Not much else other than a bad pressure switch could cause that.
I’m an idiot when I bought my karcher 1800 thinking it had the quieter motor. I think it might have been their one 1900 model. I can’t justify 600 or 700 for basic car washing but would love something a little quieter.
Karcher is a great brand though and reliability wise would be better than any in this video.
I have the Hart 1700 psi 1.2gpm made like the craftsman I was wanting to upgrade to the Westinghouse after watching this I’m going to keep my Hart
No need to change you have a good machine these are all very close and share many of the same components. I wouldn’t upgrade unless moving to an Active pressure washer or something like that.
Setup the wash cart from your video and the deionizer. So nice. No more water spots that I’d have to hit with the detail spray.
That is awesome!
On the craftsman handle that it comes with, can you take off the wand and easily twist on a wand with a foam cannon attachment? like the ones they sell at harbor freight?
You could I’m pretty sure it’s the same type of fitting. Still cheaper and better to do the adapter I showed as the wand you would put on just make the whole gun longer and very weighted at the end with the foam cannon attached.
@@CarsWithKeav I already have the foam cannon attachment that's why I was asking bc I didn't want it to go to waste it's a very good foamer and just twists right in like the normal wand would and you can adjust the thickness and spray pattern, my power washer broke at the hose fitting where you tighten it it got stuck somehow and while i was trying to loosen it the whole thing just snapped the plastic inside holding the fitting together lesson learned just get the quick connects for everything not just the garden hose side
@@PrincessAddie14 okay, that makes sense. I have had the Harbor freight Portland pressure washer and it uses the same adapters as the Craftsman.
@@CarsWithKeav that's the one I had and the front hose fitting and the hose fitting that tightens onto the threads got stuck, I got it off then tried to re tighten it, it got even more stuck then the whole threaded part on the washer broke from the inside, because it's all plastic holding stuff together in there, can you tell me what the quick connect specs are for the hose attachment not the garden hose one I already have that
@@PrincessAddie14 it’s hard to say in the Portland they change sizes every few years when they switch out pump manufacturers. They are usually 15mm m22, but could be 14mm. Sometimes it’s best to buy 14mm m22 quick connect and then get a 15mm to 14mm adapter. Makes things easier as 14mm is a standard size you find at Home Depot or Lowe’s as well.
I have been using that craftsman for the past 3 years and it has been pretty good. I want to upgrade eventually but it hasn’t given me any issues yet!
All of these should do well. I have had the Ryobi and Greenworks and abused both for years as well. You can’t go wrong with any of them.
Can any of these be bucket fed? Can you make a video on the subject? I live in an area where tap water is scarce. Thank you in advance.
None of them state they can self prime. Usually only a few more expensive units and all battery powered one can siphon from a bucket.
I just bought a craftsman 1700psi pressure washer, but I read some reviews that say it breaks down after a short time is that true or not? The reviews in Amazon are positive and the washing machine has 4.5 stars, I'm confused, it cost me $200 because of shipping to Saudi Arabia and I didn't have Amazon Prime, so a delivery fee has been charged
Mine is working just fine I know several people
Who have had for years. There will always be some bad reviews they are usually the most vocal so it makes it sound worse than it actually is. No manufactured product will have a perfect track record there are always a few bad ones.
@@CarsWithKeav thanks man , I'm excited to try this washing machine. I bought the upgrade tools 🤍
What do you think of the craftsman 1800 psi?
I go over it in this video and explain what I like about it.
@@CarsWithKeav I meant is the 1800 better than the 1700? The craftsman 1800 is like $99 now at Lowe’s .
I really want to get one soon for starting detailing just confuse what to pick, and I see most people getting for ryobi
Thank you
@@Mo-nj4yi They are all about the same most are just picking based on popularity and availability. Ryobi being at Home Depot is mainly why it’s more popular. I picked the Craftsman as I like that the water inlet is on the side and not the back.
that shiny jacket is PVC thermoplastic. The matted cable is probably neoprene rubber. The jacket lettering should tell you what it specifically is. Remember the episode of the Simpsons where all these restaurants had a conveyor belt to an underground meat pit with the same all purpose meat for everything? That applies to these pressure washer.
For sure does feel all the same. Not necessarily exactly the same parts, but I feel they all pull from the same parts bins which is why the Ryobi is squealing now when it didn’t before and the Greenworks is quieter now and was. It before. They probably change around based on availability and price. The Portland from Harbor Freight was the same old one was great and new one squeaked. Thanks for the knowledge on the cable coatings as well.
@@CarsWithKeav They seem to follow the HF model of having the same product but choosing different suppliers based on price and or availability. I know the original Ryobi sold their power tool business to a TTI awhile ago and it's not the same Ryobi that was based in Japan.
@@emp0rizzle Very true and I noticed the Portland Harbor freight the pump sound was different with the two models I had that were years a part just like the Ryobi and Greenworks.
I couldn’t get the 1/4” adapter you showed in the video to work on the craftsman pressure washer. I tried twisting it on like you showed, but it didn’t work. Any suggestions?
I should have checked the comments below! People already asked this, sorry!
Yeah, they just seem to not all be perfect the adapter and the spray guns. It takes some force sometimes. Some have said a pair of pliers helped. Sorry if it didn’t work.
I had the hyper tough from Walmart it cost like 80 bucks and it lasted me 3 years cleaning my 2 cars every week pretty good value
Awesome! Most all of these are close when it comes to the internal parts just the plastic on the outside is different.
@@CarsWithKeav which would you recommend from this line up?
@@brianbraseas567 I really like the Craftsman for some reason been using it in testing videos and works great.
Where did you get the westinhouse for that price. I just bought the ryobi for 100 and westinhousee on Amazon for 150! 160 with tax !
Got it at Home Depot Online. Amazon raised the price and so did Home Depot. It is $125 at HD right now. www.homedepot.com/p/Westinghouse-2100-PSI-1-76-GPM-13-Amp-Cold-Water-Electric-Powered-Handheld-Electric-Powered-Pressure-Washer-and-5-Quick-Connect-Tips-ePX3100v/325115831
I’m looking for an electric just for when I do the wheels because I’ve had my craftsman gas for the last 4 years but I don’t leave it on while I clean so I turn it in and off about 5 times during my wash and now I kinda want electric to go with just an auto start stop and I’ve had electric before but of course gas is the best for other than car detailing and that’s why I have the gas. I saw a Worx one on Amazon for 100 and I wanted to get it but I want to see which one in this video does the best.
Just about any of the better known names in this price range will do the same performance it really comes down to what design you like. The subtle differences like water input location made me choose the Craftsman.
What attachments did you use in the end of the craftsman? I would like to know so I can upgrade it. Thank you
It’s a universal adapter just keep in mind it being universal it might take a bit of force to get it to attach. Many have commented this, but mine works fine just the manufacturing tolerances are not very consistent. amzn.to/3yXJew4
Will this work for washing my car with the no hands method ie pre rinse, foam, rinse, done. ?
I mean if your car is ceramic coated and you have a strong enough soap that’s for sure possible. Caked on road grime usually requires a contact wash to get 100% clean. If it’s not coated there is usually no way to Touchless wash as the dirt just kind of bonds to the clear coat. You could get it relatively clean, but some visible dirt would still be there.
Thank you so much, this is exactly what I needed. Great review!
You’re welcome
How did you manage to get the STYDDI Pressure Washer Gun Adapter
On the Craftsman? I bought it and the adapter to make the gun shorter but it doesn't go in. The one that comes with the gun spins and locks in place but the aluminum one to make the gun shorter is awful I've been struggling with it for 30 min
Mine just takes a little force down then make the turn. Sometimes a pair of pliers helps, but it goes in there. Wonder if manufacturing tolerances vary on the gun itself and on the adapter that is made.
@@CarsWithKeav I managed to get it in there but had to step on the gun with both feet and use a wrench to get it in there. That was awful. Lol will give it a try this coming weekend. Thanks for the review, bought the Craftsman because of your video lol
@@newbierides That sucks hopefully now you won’t ever have to change it out again.
My ryobi finally is giving out , i have to punch it for the pump to turn on lol. Might n be gettting the graftman but i mean for 100$ cant really complain held up 2 years of preety much everyday use
Might want to look into the warranty its supposed to be 3 years. If not I'm really liking the Craftsman using it in a lot of my test videos.
Something is wrong with that RYOBI bc I have a 1900 psi version and it sounds like the craftsman you reviewed! Identical actually
These companies shop around their parts suppliers even in the same year you could have different pump sounds. My previous Ryobi did not sound like this and this Ryobi sounds like my old Greenworks. 🤣
Very helpful video. Any chance you could post a video with the noise level for each unit say from 6 feet away?
I’ll see what I can do. I already boxed all them up to be given away.
My Ryobi gets almost the same numbers as yours.
2.0 Nozzle 1400PSI at 1.23GPM.
2.5 Nozzle 1100PSI at 1.35GPM.
3.0 Nozzle Dont have cant test.
3.5 Nozzle 750 PSI at 1.53GPM.
4.0 Nozzle Didnt Bother to test.
They are very consistent machines. I feel that 3.0 is the best for car washing. Nice to see others testing the numbers instead of blindly trusting these companies.
@@CarsWithKeav Imma try the Hypertough 5pk nozzle at walmart see if I can get a little more pressure than a 3.0 nozzle while still delivering a least 1.4GPM because those hypertough nozzle are a 2.9 and im a little curious about it.
@@TheManMiscellaneous Off sizes are always nice it’s those little adjustments that can get you what you want. Active always ships their pressure washers with 3.7 and 4.6 which are nice off sizes to have for other testing.
@@CarsWithKeavI got the 2.9 Hyper tough nozzle its exactly at 900 PSI and around 1.45GPM. Maybe its just a 3.0 Nozzle rounded down but who knows.
@@TheManMiscellaneous that’s the hard part are they really what they say they are you can use a pin gauge, but it only works on the 0 degree as the other degrees are not perfect circles to measure.
Do you know how many hours the bigboi and the active 2.3 estimated for
They do not state hours, but I know the type of induction motors they are using are rated for hundreds of hours. 400 is probably a good safe number.
How were you able to fit the short attachments to the craftsman gun ?
Mine fit it pretty easily takes a bit of force to push down and turn. They made these to fit so many different types and the plastic guns all seem to have different tolerances. I know a few needed to use a pair of pliers to force the turn.
@@CarsWithKeav thanks for the reply
What is a good safe Psi to wash car and damage clear coat?
Safe PSI is 1200 or less. 1K PSI is my preferred pressure when washing.
So out of all of these which one yall think is the best
I really like the Craftsman been using it in many videos for testing products. If wanting to play it safe the Ryobi is used by many mobile detailers and is known to be pretty reliable. The Westinghouse is the only one I don’t know about durability. All the others are a solid choice.
@@CarsWithKeav thank u
For mobile detailing do you need anyone of these to have a water pump connected to the water tank?
None of these can self prime so you need enough gravity feed flow or you need a pump to feed them.
I've been binge watching for a few months. Retired and need a new hobby. Enjoy for the outtakes, makes you real.
Congrats, I see you recently passed a YT subs threshold. Would it be easier to have a spreadsheet to screenshot instead of rattling all those numbers. Then again you wouldn't have as many outtakes.
I’m one of those people that never writes anything down and calls numbers just off memory. I probably should have some kind of spreadsheet, but Matt from Obsessed Garage already has a very detailed one out there on most of these pressure washers. Thank You for watching!
I am puzzled what the Westinghouse unit is doing each time it shuts off? I hear the motor wind down, but then there is a weird pop and the whole unit jumps. What's going on there?
When I was editing I thought the same. I think it has a very abrupt pressure switch and might be at a higher psi which make it jump like that. Greenworks was doing the same, but far less.
@@CarsWithKeav I had originally bought the Westinghouse unit but sent it back before even opening it after watching your review and seeing how it behaved. I ended up getting the Greenworks unit, but I think I might send that one back too. I tried it and it has a similar pop like you said. I am not sure exactly why, but it really bugs me when I used it. Maybe I should just bite the bullet and spring for an Active 2.0. Everything points to it being a much more solid unit. For these machines, it seems like you get what you pay for?!
@@marchenkel4782 If you want to save a little the VE52 is also an option at $199. Active 2.0 will last longer due to the parts used, but its only a 5% increase in performance.
Great video as usual. Side note, has your BigBoi shipped ??
Not yet, anticipation is killing me. 🤣
@@CarsWithKeav Me too!!.
Did u have to do anything to get the shorter metal piece to fit the craftsman cuz I bought one but can’t get it to twist in
It can be a tight fit you hav ego push down pretty hood and the twist it.
@@CarsWithKeav thank u ima try again
What pressure gauge are you using?
This one amzn.to/3vLFE6H It’s not cheap, but the reviews are the best I see for a pressure gauge. Would still need to build an adapter to work with the spray gun.
This will be a good video!
Hope so. All I got to say is I’m not testing 4 at a time anymore. That’s way too much work kept confusing myself. 🤣🤣 Could have milked this into 4 different videos, but not worth it.
That Westinghouse is just a repackaged and branded Sun Joe. Never buy Sun Joe. They are junk, don’t last long and the company doesn’t stand behind them, just try to sell you a new one…never again. As Matt M proved in his massive pw test, under $200 only buy the Ryobi or Karcher cube depending on how much you want to spend. I’d happily use the Ryobi, but I’m sticking with the Karcher considering I have a 20 year old one that still works and I keep it as a backup in case one I have stops working in the middle of a wash.
Great info to know I have always been partial to Ryobi and seems to be the unit most detailers use for their first setup that Ro the Karcher.
Can these be connected to a 100' hose reel and not lose pressure?
Should be no problem. Beyond 100 feet is where pressure drop kicks in if using a 1/4 hose.
Thanks for the reply. I would like to put this on a shelf in my garage right above the water supply, then connect to a 75-100' reel so I don't have to ever move it.
@@delargecws Should not be a problem.
Anyone have trouble twisting on the short adapter to the Craftsman?
Sometimes it takes a pair of pliers to help push down and turn. A lot of these guns the slots are sometimes not cut exactly the same and the adapter works for many brands so it’s not a perfect fit. Good thing is once you get it on you won’t need to take it off.
The best one was the harbor freight one but the stuff it comes with is junk have to replace the tips and gun
It is the best I did a video on it a few months ago other problem is the newer ones seem to make a squeal sound as well. The amount you save if on sale is more than enough to buy an adapter or some upgrades.
@@CarsWithKeav is the k2 Karcher any good see one on sale for 96$ at a liquidation sale was thinking of getting it
@@SsShadowbaneSsS I have not tried a Karcher before, but people seem to really like them.
When will you get the active 2.3
Looks to be end of the month. They announced pre-orders will start shipping on the 22nd. Somewhere between the 25th and 28th most likely. They are sending me one and I bought another one just to see which one gets here first. I’ll give one away at 20k subs.
@@CarsWithKeav I want to see the active 2.3 against the bigboi before I purchase
@@gearlstrickland3365 I’ll be testing both Big Bois and Active the minutes I get them.
@@CarsWithKeav i’m not lucky enough to win one lol I enjoy your content
@@CarsWithKeav@ 20k you say… 🤔
**starts making 5k YT accounts**
Is there a link for extended foam nozzle?
Could you explain exactly what you mean by extended foam nozzle? Maybe a timestamp of when I talk about it. Just wanting to make sure we are talking about the same thing.
I’m looking into getting the craftsman in your video when you’re applying the soap foam is that attachment in the box?
@@jamesblanks4747 There is a longer attachment in the box that will allow you to hook up the foam cannon I used. I also show a shorter version in the video that will allow you to do the same and the gun not be so long. There is a soap blaster than comes with it I just don't like it so use my own.
You were gassing up the Craftsman the entire time. It was no surprise 😂. Just say you hate Ryobi at the very beginning 💀
@@bluebloodmanny Kind of hard to say I hate a Ryobi as I have over 100 of there tools and used their older model pressure washer for several years before. Just nice to have something different that made a few design differences I like.
Greenworks all the way.
Great machine had one for years.
Thanks 🫡👍
You’re welcome
I knownothing about preasure qashera. I just bought a new car. I was looking for recommendations. I fpund it. But I now have NO IDEA WHAT YOU ARE TALKING ABOUT NOZZELS?? 30, 20, 40?? WTF??
So the size of the nozzle like a 2.5 or 3.0 is the size of the hole which determines the pressure and flow. The smaller the hole the more pressure, but less water flow and vice versa for the large hole. When it comes to these especially for car washing there is a sweet spot around 1000 PSI which gives you more water flow which makes rinsing easier and it’s not enough pressure to harm the painted surface. The nozzle degree which is 0,15,25,40 and usually come colored red, orange, green and white. These are the patterns the lower the degrees the narrower the pattern and that increases the impact as it a concentrated spray. Going to the bigger degrees such as 25 and 40 which is recommended for car washing the pattern is perfect for rinsing and not harming the surface.
Thank you sir. I'll be getting the Craftsman thanks to your review and a friend's feedback. You got a new subscriber.
@@angelgabriel4642 You’re welcome. Hope it works out well for you!
Those included foam cannons are a complete joke. They should be ashamed of themselves for including that.
Exactly, this is what happens when the designers and quality people are not into washing their cars.
I avoid Ryobi products in general. Every one I've ever used or encountered is complete junk. Spend a little more for something better.
Good thing we have so many choices out there. I myself have never had a problem with any Ryobi product. Power tools I use a little bit here and there so I don’t abuse them, but the lawn equipment I put through the ringer and they keep going. Still have several tools from back when they were blue and not green. 15 years old at least. Now if I used them as a business like construction or mechanic I would most likely run a higher end brand. Crazy thing though Vaughn Gittin Jr. and his RTR race teams use Ryobi.
i just use my thumb to create pressure from the water hose. works great washing my car. cost. Sore thumb.
The ONLY reason to get a pressure for washing your car is for foam guns which do a better job at creating foam not suds.
We all have our ways and pressure washers are a want vs a need and I want them. I try just a garden hose every now and then and the effificiency of the pressure washer and it’s ability to clear soap residue it’s something I can’t give up. It does clean better as well after the pre-soak as it get more grime and debris off which will have less contamination in your contact wash. Some people like Starbucks and I don’t drink coffee, but I’ll splurge on a pressure washer I can use over and over and not throw away.
I thought the westing house was a M22 15 not 14
I never tried an actual fitting, but my digital caliper showed exactly 14mm and the same as the others. It could possibly be I’ll have to check.
1st!
Congrats! 🥇🏆