Yes I can't support having no support. I stopped seeing them wrecking anything used/produced (machine/thread which also no threated well in that process). I am not a machinist but should they not at least face, make a rounded base and switch ends of "stock". At the "couling whatever bottle" I thought "Is he making salad?".
That's very limited thinking. Are they not producing precision work? These people are being amazingly resourceful with what they have. You wouldn't last 5 minutes on that environment, let alone have any skills close to this. It's a joke, chop down a zillion trees, humans feel nothing. But get unbroken over a machine 😂😂😂
That was only during massive interrupted cut which all lathes will do to some extent. Once he was down to a complete round you do see any of this. Don’t knock it.
Movement in the tailstock ensures perfect chatter and slop in the final product. No need to worry about that as it will bind well on install and will not need thread locker.
Stupid boring comments like this abound on every single one of the Pak workshop videos. And always from smartarse from the West, where the cost of high precision work can actually be paid for.
While I'm sure they'd be appalled at its current state of repair, I'm just as sure they'd be proud that their machine is still soldiering on in light of all it's been through.
I need Counseling and Rigorous Therapy after watching these Chancers Gambling on these Unmaintained and Abused machines >> Has anyone told them about Coolants and replacing the Bearings in the Revolving Centers . . . . . ?
I sincerely doubt Curtis would criticise this. For starters they are working in a very poor country and do not have the tools and equipment he does. it would be unAustralian for him to be critical. In fact I suspect he would be very understanding of their plight. Maybe I shall send him the link so he can look at it himself.
@@johnfennA poor country that can afford nuclear weapons?? It's always amazing how much money can be found to spend on really expensive defence projects that also happen to bolster politicians ego and prestige! Meanwhile the poor and the working poor suffer. Nothing funny about any of that!
@@johnfennI think that Kurtis would be concerned about the lack of safety standards and equipment, but only because he wouldn't want to see other tradespeople getting injured or killed.
Judging by the long stringy chips coming off as the thread is being chased on the screw, I'd say the material is steel. The small chips coming off the nut are typical of cast iron. I can't believe the way they were working on breaking off the finished part. It could have ended in a damaged part, lathe, and a serious injury.
I agree that is just a piece of mild steel not strong for such a bolt it must be forged!!!! But then these people are posting to get money from TH-cam!!!
Skill?, das ist Fürchterlich, das hat nix mit Drehen zu tun, das iss Material rausfressen, schaut euch die Späne beim Gewinde an, da kommt einem ja das Mittagessen hoch, mein Meister hätte mir nen Tritt in den Hintern verpasst und hochkannt aus der Werkstatt geschmissen, und zwar zu Recht ;-p
они и слова такого как подшипник не знают , там и масла в редукторе нет , скрипит и стонет , а что такое эмульсия они отродясь не знали , за то лом и кувалда у них в огромном почёте
I did a quick search. The median wage for a machinist in Pakistan is about $400US/month. Probably half (or less??) that where those guys are. We don't know how good we have it.
Can't say that these folks are doing anything special. If they would think things through and keep their machines in better shape and repair them and do som maintenance on them it would be a lot easier for them. Whenever i had to machine a large shaft and nut i would machine the nut first then cut the thread on the shaft last because it is much easier to hold the nut and screw it onto the shaft. A lot less weight to handle
Is a lack of coolant the status quo or was coolant avoided so chip production clarity wasn't impared for this video? Oops. I was impatient. Some cutting fluid was actually dribbled on during the thread cutting. 😅
Worker to Boss: "Uh, this might take a while". Boss to Worker: "OK, just go relax in the lounge and watch TH-cam on your phone". "Thanks boss!" (Ya, right).
Looks like they just kind of roughed in the internal threads, the used the thread on the part to finish form the internal threads. I think it means that the parts aren’t interchangeable. That nut won’t work on othe bolts. The other thing, a bolt that large is meant to provide some serious physical properties. I’d think it would call for a forged bolt. Not one where the head is welded? On.
Every part ends up on the floor. Love the "wobble" centre, I looked for one like that and couldn't find it. I feel for that DSG lathe, once a rolls-royce of lathes.
I used to put time in at "job shops", back in the day, I had it made in the shade compared to some of the jobs and lathes I see on some of these channels, these guys are amazing.
OSHA would love that they are using a Vee -belt for lifting that 150 chunk of iron. I guess life is cheap in India. It's amazing what they can do with old, worn-out machinery; that tailstock is scarey.
Talk about Knowledge and Common Sense, These Masters of the Machine Shops are some of the Best I have ever seen. Working in Sandals on Dirt Floors and turning out Masterpieces.. Salute to you Wonderful, Intelligent, Hard Working Men that do not know these things can't be done so they just do them, Great, Masters of the Machine Shops.
They turned that live center into a dead center ,that shaft is oval shaped from the sloppy worn out live center funny as hell thats why the other guy was using a pipe wrench to test fit it ,imagine if these guys had some good tools to use or took the time to make some use of them, or hell heard of lubrication!
O czlowieku takich luzow na koniku podczas skrawania wogole nie widzialem haha :D Bicie takie że mała głowa :D centymetr w tą czy w tą bez roznicy dla nich .. bedzie chodzić haha ;D
forse bisognerà vedere il cuscinetto della prima contro punta ... quando fa la passata sobbalza !!! la seconda sembra migliore !!! perché alla fine per tagliare l'ultimo pezzettino non hai usato un seghetto a mano oppure una mola angolare con disco sottile , avresti fatto più in fretta e molto meno fatica !!!
It's easy to see it thru the eyes of the professional American machinist,these Pakistani have what I see by far my exceptional skills,our friend woulduld use electronic digital measuring instruments,takes the guesswork out of it,that's laziness bro, these Brothers are exceptional at their chosen fields,I liked how he was measuring the bore I learnt something there,and it's spot-on his little trick of measuring,I can use this on wide array of area's bro,shame on you,your a spoiled brat, Tootles ain't coming back, Tootles resides in the land of Oz now down under and I'm happy to say is very happy
I totally get what you are saying . Skill almost always is pushed to the side in favor of $ of mass production. These guys are doing the best they can with what they have. I wish they had safety equipment and better equipment. I WILL NOT DISRESPECT THEM!
I have respect for these guys ans what they have to work with but making fun of someone for using precision measuring devices in favor of guess work is pretty crazy. Can you see how bad the threads are on that bolt? Rough af
Parte de que estos tornos ya no tienen ni una presión, y esta lleno de óxido, esto es lo de menos, lo principal es que esta trabajando sin elementos de protección personal, sin gafas, sin zapatos de seguridad, sin guantes, sin ropa adecuada para trabajar en el torno
Scary to see the piece jumping every time the tool touches it. Everything is wrong. The chatter on the threads is scary. The way they manhandle the by dropping it on the ways is even scarier. Why didn't they saw the bolt free is beyond me. The voids in the cast iron lump they're making the nut from... I could go on.
Ok, boys, let me do some cleanup for you! I just realized that I pissed away 2yrs of my life in college shop classes by doing it by the book. Ha, these guys are great.
Been a time served centre late turner, for over 50 years, and it's heart breaking to see what they are doing to these, once precision lathes.
Yes I can't support having no support. I stopped seeing them wrecking anything used/produced (machine/thread which also no threated well in that process). I am not a machinist but should they not at least face, make a rounded base and switch ends of "stock". At the "couling whatever bottle" I thought "Is he making salad?".
At least there still using them, could have been scrapped.
That's very limited thinking.
Are they not producing precision work?
These people are being amazingly resourceful with what they have.
You wouldn't last 5 minutes on that environment, let alone have any skills close to this.
It's a joke, chop down a zillion trees, humans feel nothing.
But get unbroken over a machine 😂😂😂
Love how the pinion end is jumping up and down during cutting. Precise engineering to tape measure accuracy!
Measure with a micrometer, mark with soapstone, cut with a cold chisel.
@dicksargent3582
That was only during massive interrupted cut which all lathes will do to some extent. Once he was down to a complete round you do see any of this. Don’t knock it.
As with all these workshops, the precision is fit for purpose, and the best can be done with available equipment.
@@Sillyturner The tailstock is loose.
I’ll never complain about the amount of gear, tooling and measuring equipment I had to work with ever again
OMG! Way past time for a rebuild of that live center.
Old V-belt as a sling! I have to remember this...
Is that a special tail stock for cutting through slag? Ive never seen one move like that. Must b for slag cuts.
Movement in the tailstock ensures perfect chatter and slop in the final product. No need to worry about that as it will bind well on install and will not need thread locker.
loll
Stupid boring comments like this abound on every single one of the Pak workshop videos.
And always from smartarse from the West, where the cost of high precision work can actually be paid for.
Just stating the obvious.@@alexanderSydneyOz
Do not fret, precision was checked with micrometer at 16:20
Running true like a Swiss watch😂@@Basuliic
drop of oil would not go a miss
I'd be more impressed if they would oil the lathe ways once in a lifetime!
The engineers that built that once beautiful Dean Smith and Grace lathe will rolling over in their graves. Mind boggling...
Painful is being kind. Not a 10 thou area is without a scar. Where is the pride we show to the equip that feeds our families ?
I'd say it's a huge tribute to them that this machine is still in operation!
While I'm sure they'd be appalled at its current state of repair, I'm just as sure they'd be proud that their machine is still soldiering on in light of all it's been through.
No way I would let them near any of my tools!!!!
@@somerandombaldguy5296how old would it be
I have never seen anyone abuse a lathe like this.
And did you see the tail stock centre going up and down? They’ll end up with an oval shape.
I need Counseling and Rigorous Therapy after watching these Chancers Gambling on these Unmaintained and Abused machines >> Has anyone told them about Coolants and replacing the Bearings in the Revolving Centers . . . . . ?
It's a DSG as well! I could hardly watch.
@@paul4124 the dead center going up and down😂
Wow and not in a good way
I’m not sure that Curtis from Cutting Edge Engineering would approve
I sincerely doubt Curtis would criticise this. For starters they are working in a very poor country and do not have the tools and equipment he does. it would be unAustralian for him to be critical. In fact I suspect he would be very understanding of their plight. Maybe I shall send him the link so he can look at it himself.
@@johnfenn First of all, I was being facetious. Secondly, I simply said I’m NOT SURE HE WOULD APPROVE. I never said CRITICIZE.
@@johnfennA poor country that can afford nuclear weapons?? It's always amazing how much money can be found to spend on really expensive defence projects that also happen to bolster politicians ego and prestige! Meanwhile the poor and the working poor suffer. Nothing funny about any of that!
@@johnfennI think that Kurtis would be concerned about the lack of safety standards and equipment, but only because he wouldn't want to see other tradespeople getting injured or killed.
@@markfryer9880 totally agree. The safety issues are what I was referring to.
It's interesting to see how people worked in the Middle Ages.
Thanks for the very varied video.
I could have watched for many hours.
Made from scrap? Hell no, the finished article will come with whatever test and heat certificates you need.
the bearings in that poor live center have left the building
Judging by the long stringy chips coming off as the thread is being chased on the screw, I'd say the material is steel. The small chips coming off the nut are typical of cast iron. I can't believe the way they were working on breaking off the finished part. It could have ended in a damaged part, lathe, and a serious injury.
And they call it amazing skills!!!!! I have been a machinist for over 50 years never seen anything like it:-((((((
There is no health and safety in Asian countries. And amazing is just clickbait
No worries.. looks like this company follows strict safety guidelines so they should be fine.💀
And they wonder why their equipment fails so often...that piece is nothing more that a large chunk of junk metal
I agree that is just a piece of mild steel not strong for such a bolt it must be forged!!!! But then these people are posting to get money from TH-cam!!!
That chatter on the threads lol
Hey what angle threads you need?
Doesn’t matter just whatever tool you have.
Your tailstock moves 15mm every rotation
I wonder what Kurtis from cutting edge engineering Australia would think of this 😏 Perhaps he should send Homeless to pick up a few ideas 😂
You watch him too then. Great entetainment
Я плачу;😂😂😂😂ещё бы железяка .бнулась и отдавила или сломала им копыта...😀😀😀
Skill?, das ist Fürchterlich,
das hat nix mit Drehen zu tun, das iss Material rausfressen,
schaut euch die Späne beim Gewinde an, da kommt einem ja das Mittagessen hoch,
mein Meister hätte mir nen Tritt in den Hintern verpasst und hochkannt aus der Werkstatt geschmissen, und zwar zu Recht ;-p
Can’t believe they set off with such a bit of shitty gas axed bit of square steel to turn into round bar. Amazing, work with what you got 👍
Boy this is the ultimate blacksmithing at its finest.
o ho .all you lovely Turner's , good good and good work, very hard work. Congrats congrats.. unbelievable. Superb machining and skill,,,
Что газорезчик не мог подравнять заготовку углы подрезать если уж у вас лучше не нашлось, или газ кончился.
Не платят за газ,им и отключили(бедные люди)🙉😹😹😹😹
Nothing like a lifting sling made from a 3/4" x 72" drive belt
Про ТБ эти мужики когда-нибудь слышали?
When you get scrap pieces like that off of Government funded "vessels", you know it is the best quality steel.
ломом через резцедержку это сильно
Well done. Great work.🇨🇮🇵🇸
На 4:32 хорошо видно, как разбит подшипник в задней бабке и заготовка дёргается вверх вниз, качество будет....!
они и слова такого как подшипник не знают , там и масла в редукторе нет , скрипит и стонет , а что такое эмульсия они отродясь не знали , за то лом и кувалда у них в огромном почёте
They still have all their toes, amazing I'll never complain about the 200$ boot allowance lol
The "tooth ache " in the live centre ,zero luberication though they get things done.
This is the very first time I've seen them use a lathe without it being 75,000 RPMs
I am surprised they didn't turn the lath on to break off the bent bolt!
I did a quick search. The median wage for a machinist in Pakistan is about $400US/month. Probably half (or less??) that where those guys are. We don't know how good we have it.
Can't say that these folks are doing anything special. If they would think things through and keep their machines in better shape and repair them and do som maintenance on them it would be a lot easier for them. Whenever i had to machine a large shaft and nut i would machine the nut first then cut the thread on the shaft last because it is much easier to hold the nut and screw it onto the shaft. A lot less weight to handle
😊 muito bom parabéns sucesso
@15:23 Always keep the inlet to your soluble oil pump free of foreign debris. 🤔🤣😂
Buy the scrap for pennys on the dollar and Voila'! $12,000 Nut and Bolt!
Priceless. 🙏👍🤗🤑🥰
that guy was strong as a horse to lift that 200kg nut up on his own like that
Not problems about damaging the lathe bed or the threads, great skill though.
Almost all developing countries have very talented skilled labor.
That's scary the amount of slop in that live centre
So this is how you do thread knurling 🤩
By the way Kurtis that fancy boring bar you made total waist of time check this one out😂
Is a lack of coolant the status quo or was coolant avoided so chip production clarity wasn't impared for this video?
Oops. I was impatient. Some cutting fluid was actually dribbled on during the thread cutting. 😅
I don’t believe that any steel is useless, you are using it, so you are proving that it has usefulness
Love the smell of metal shavings in the morning.
At least it’s an offcut from what looks like plate so might have some guts to the steel.
They seem to have a knack for taking rubbish, turning it into crap, and destroying the tools along the way.
Incredible skill, but is there any eye protection in sight, anywhere? Makes it painful to watch.
Слава людям труда, от себя желаю достатка
Speed of work seems more important than outcome.
Great skills, but why work in such a mess. Not sure about that tailstock though.
Worker to Boss: "Uh, this might take a while". Boss to Worker: "OK, just go relax in the lounge and watch TH-cam on your phone". "Thanks boss!" (Ya, right).
How would you like these guys making the bolts and nuts for the next space x launch site.
Words fail me.
Вот как выглядит Ад для станков.
А токарь с кувалдой........
Заготовка конечно полный 3,14здец конкретный.
@@user-mj3if4co9t Конечно фрезера же нет пройтись углы скруглить сначала.
India champion steel industry
5:45 можно было резаком срезать углы у этого бруска, меньше токарки было бы!!!
Looks like they just kind of roughed in the internal threads, the used the thread on the part to finish form the internal threads. I think it means that the parts aren’t interchangeable. That nut won’t work on othe bolts. The other thing, a bolt that large is meant to provide some serious physical properties. I’d think it would call for a forged bolt. Not one where the head is welded? On.
18:27 сверло в конусе задней бабки провернуло? Красавчики!
Wow do you see the movement of that tailstock , how can they expect any resemblance of accuracy with lathe parts that worn out
Do not fret, precision was checked with micrometer at 16:20
The lather operator was 15 years old when he first started this turning.
slightly loose tailstock.😆 It's probably an instructional video on "how not to use a lathe"
Having just started watching I'm waiting for the appearance of the Pakistani micrometer.
Such loose clothing around a lathe, what could go wrong.
THE TAILSTOCK IS MOVING UP AND DOWN AS THE PIECE IS ROTATING ON THE LATHE!! PRECISION TURNING.
Every part ends up on the floor. Love the "wobble" centre, I looked for one like that and couldn't find it. I feel for that DSG lathe, once a rolls-royce of lathes.
I searched for that micrometer at 16:20 and couldn't find it too.
Clean up the floors.
No final apareceu uma talha, pq não foi usada antes? Quando foi feito o parafuso.
Health and safety ki care asia ke bina koe aur ajj tak kar nahi
Don't think any part of that lathe has seen oil 😮 Hope there's some in the gearbox 😅
So aren’t you supposed to,have water poured on the bevel that’s cutting the metal? Is that why there is that smoke?
A lot of work just for a simple ship anchor.
But you also can use it as pedestal for mailboxes or flower-vases.
😂
It would make a nice nail for my new oil rig.
Once Again, Mind BLOWN !!
It's the Skill is ALL I see !
Canada
Love the lifting gear, looks like a knackered old fan belt
That bit was SHARP!
well done
Was für ein Pfusch
I used to put time in at "job shops", back in the day, I had it made in the shade compared to some of the jobs and lathes I see on some of these channels, these guys are amazing.
OSHA would love that they are using a Vee -belt for lifting that 150 chunk of iron. I guess life is cheap in India. It's amazing what they can do with old, worn-out machinery; that tailstock is scarey.
🤣🤣🤣🤣🤣🤣 Look at that job jumping on the Center ... Unbelievable !
Wow, have they not thought about how much time a center support and gouge tool will save?
um, do you think "cost" might be a factor?
Снимите год выпуска станков очень интересно
Talk about Knowledge and Common Sense, These Masters of the Machine Shops are some of the Best I have ever seen. Working in Sandals on Dirt Floors and turning out Masterpieces.. Salute to you Wonderful, Intelligent, Hard Working Men that do not know these things can't be done so they just do them, Great, Masters of the Machine Shops.
Amazing guut 👍🙏❤🥰
They turned that live center into a dead center ,that shaft is oval shaped from the sloppy worn out live center funny as hell thats why the other guy was using a pipe wrench to test fit it ,imagine if these guys had some good tools to use or took the time to make some use of them, or hell heard of lubrication!
O czlowieku takich luzow na koniku podczas skrawania wogole nie widzialem haha :D Bicie takie że mała głowa :D centymetr w tą czy w tą bez roznicy dla nich .. bedzie chodzić haha ;D
le centre écrou souder du jamais vue
Milometr nie kilometr
Machinist 1 " NASA said to get it as close as we can to spec"
Machinist 2 " Looks good to me. Ship it."
🤣😂😅 The tailstock and live center. THE LIVE CENTER! More movement that James Brown on stage.
I hope that fan belt has been tested to find it Safe Working Limit
Very good 👍
forse bisognerà vedere il cuscinetto della prima contro punta ... quando fa la passata sobbalza !!! la seconda sembra migliore !!! perché alla fine per tagliare l'ultimo pezzettino non hai usato un seghetto a mano oppure una mola angolare con disco sottile , avresti fatto più in fretta e molto meno fatica !!!
It's easy to see it thru the eyes of the professional American machinist,these Pakistani have what I see by far my exceptional skills,our friend woulduld use electronic digital measuring instruments,takes the guesswork out of it,that's laziness bro, these Brothers are exceptional at their chosen fields,I liked how he was measuring the bore I learnt something there,and it's spot-on his little trick of measuring,I can use this on wide array of area's bro,shame on you,your a spoiled brat, Tootles ain't coming back, Tootles resides in the land of Oz now down under and I'm happy to say is very happy
I totally get what you are saying . Skill almost always is pushed to the side in favor of $ of mass production.
These guys are doing the best they can with what they have. I wish they had safety equipment and better equipment.
I WILL NOT DISRESPECT THEM!
I have respect for these guys ans what they have to work with but making fun of someone for using precision measuring devices in favor of guess work is pretty crazy. Can you see how bad the threads are on that bolt? Rough af
Parte de que estos tornos ya no tienen ni una presión, y esta lleno de óxido, esto es lo de menos, lo principal es que esta trabajando sin elementos de protección personal, sin gafas, sin zapatos de seguridad, sin guantes, sin ropa adecuada para trabajar en el torno
Scary to see the piece jumping every time the tool touches it. Everything is wrong. The chatter on the threads is scary. The way they manhandle the by dropping it on the ways is even scarier. Why didn't they saw the bolt free is beyond me. The voids in the cast iron lump they're making the nut from... I could go on.
It's amazing how they transformed thick and useless iron into a thick and useless nut and bolt.
Ok, boys, let me do some cleanup for you! I just realized that I pissed away 2yrs of my life in college shop classes by doing it by the book. Ha, these guys are great.