ZBrush 2018 Controlling Curves - Curves Helper
ฝัง
- เผยแพร่เมื่อ 17 มิ.ย. 2018
- Segment from an old livestream I kept forgetting to upload! Installation file:
www.zbrushcentral.com/showthre...
From the thread: Copy the CurvesHelper.zsc file to your ZBrush 4R8/ZStartup/ZPlugs64 folder and restart ZBrush. You should now have a new sub-palette called Curves Helper in the Zplugin palette, with two buttons called Copy ZSphere Chain and Create Curve.
Instructions
1. Append a ZSphere to the model you wish to add a curve to.
2. Select the ZSphere in the SubTool list. Scale and move it to a suitable start position.
3. Add ZSpheres to create a chain of ZSpheres, positioning how you want in relation to the other subtool.
4. When ready to copy the ZSphere chain press the Copy ZSphere Chain button.
5. Switch to the subtool that you want to add the curve to and press Create Curve.
6. With an InsertMesh brush selected, click on the curve.
Notes:
* The root ZSphere (the one you start with) must be at one end of the chain.
* Create a single chain - branches will not work.
/ @michaelpavlovich
/ pavmike
gumroad.com/pavlovich
cubebrush.co/pavlovich
3d.cgmasteracademy.com/instruc...
www.artstation.com/artist/mic...
sketchfab.com/pavlovich
I keep forgeting this tool exists. Thanks!
FYI, the initial link is deleted but if you scroll to the bottom, the creator re-uploaded the Zscript.
Was sorta hard to find so thought I'd let others know.
Thanks!!!
Hello Michael, I have an unrelated question if you don't mind, how long have you been modeling for? Thank you for your time and as always, excellent presentation and efficiency demonstration.
thanks for the kind words! I'd say i've been modeling 15 years or so give or take; more in depth info on my college-to-first job is in this blog if you want more details: www.artstation.com/michaelpavlovich/blog/W43V/do-i-need-a-college-degree
Michael Pavlovich much appreciated, keep up the good work!
Hey there. I have a very specific problem with a model, that I haven't found a solution to - mostly because I don't know the terminology for it, probably.
There is an area on my model that kinda has a "bridge" over to another part... kinda like short thread of chewing gum between two surfaces. How do I get rid of it??
cuves helper at 2:15
I really need this for the job I'm doing! thank you very much Michael, you are an incredible teacher
noice
Is this still used?
what happened at 0:21? The vid jumps ahead when you're modelling with zspheres. I'm lost on this bit.
sorry about that, here's zsphere basics: th-cam.com/video/5M_I8Un1TMo/w-d-xo.html
how did you regroup the selection of the curves?? if i hit ctrl w it deletes the polygroup, but you seem to change the colors and groups, how
zmodeler > edge > polygroup > polyloop?
This looks familar. Just had to one up me, didn't ya LOL. Just kidding. Thanks for posting this.
Сделали бы они уже давно сплайны нормальные
Hi Mich! I cannot download the curve helper plugin from your link..Page doesn't exist or is private. Where i can find it? Thank you so much!
scroll down a little and you will find there is a zip file attatched with installation method.
Blew thru everything so fast. This is not the tutorial to watch if you just came back from being frustrated from working with curves for an hour.
The beauty of video lessons is you can slow down and pause and rewatch.
I'd much rather watch tutorials that are concise like this than sift through 30 minutes of rambling.
@@JiggywattArt after some frustration I figured it out. I had a deadline and was freaking out lol. Michael is a great teacher but I'm not the only one who thinks he goes too fast