OMG...thank you SO much. I was troubleshooting an issue with joining the domain and decided to completely re-install Server 2019 and follow your video. FINALLY, things are working. THANK YOU!!!!
Awesome I’m glad and you’re very welcome. I’m super excited that my videos were able to help you with the challenge that you faced. Hopefully more of my videos can help you with your journey. If you have any recommendations let me know and I’m more than happy to help with that.
When you showed how you disable IPV6 as a habit, that helped me resolve an issue I was having with NSLOOKUP not displaying the server-name properly - thank you this helped a lot!
Thanks for the live demo. For a change, I am getting flawless installation (clean on first attempt) & the instructor getting enormous errors on the way. :)
All worked nicely until 18:55. After, when trying to ping from another computer, the ping IP worked but ping domain no. I assumed there is a DNS issue but I have not been able to resolve it
Thanks for the lesson sir! But let say if I make a separate dns server on centos7 and dont install dns services in windows servers would it still become a domain controller
hi, thanks for sharing this knowledge. may i know your server specs for this configuration or your min. recommendation as i'm really interested to try it?
hey there, i set up the DC and DNS server as shown. I was able to join the domain with my workstations, but they don't have internet connection when the DNS address is pointed at the DC (works fine with auto, but i lose domain access)The DC has internet connection if i set the DNS address to 127.0.0.1/8.8.8.8/auto. but if i point it at the DC's IP address, that loses internet connection too. Did i mess up setting up the DNS?
Hello - all of the videos are brilliant to watch. Can I ask how you would set up Server 2019, connecting two or more windows 7 or 10 clients but not using virtual machines. I have laptops with server and client software ready to go. Do I follow same approach? Not sure how to configure addressing and to allow internet access through the server I guess, but via ethernet to the clients. Any guidance would be appreciated. Thank you
Hey, how’s it going? Once you install active directory and you promote to a domain controller. Once you reboot, you should login with the domain admin account.
Hey...hope you are doing great. I notice you mixed the network class when you assigned your fix IP address to your server. If you notices when you type your IP address: (172.16.20.5/20) Your CIDR value /20 belongs to a Class "B" network...I stopped watching the video because I didn't think it was going to work and that all subsequent moves would be hinky
Failed to ping. I have two virtual windows open, One is DESKTOP, and the other is for Win2k19. ping on the DESKTOP is not working. Is this because both desktops aren't in the same environment?
great video and thank you so very much sir...but some steps were not clearly explained especially during reverse lookup, and it would be very helpful if you could increase the size of the screen...its very tiny.
InfoSec Pat can you help me, im desperate, i cant create a domain because every computer in my home says that the specified domain does not exist, when i watched your video i decided to restart everything and i retried to create a domain but now even if i open some admininstrative tool it says the same error as before and when i start the server it takes a lot of time to load (because i think the domain is unreachable)
check the DNS settings. Sounds like that is not setup right. do NSLOOKUP to the domain and make sure its seeing the correct IP address to the DC. Thanks
If you have set up the domain and are trying to add computers to it, make sure you set the computer's DNS to the IP of the Domain controller/DNS Server
Awesome video, I'm not sure if you'll see this, but I guess I didn't have administrator privileges when I tried this. As a result, I don't have permissions to view many menus in Windows. Any suggestions or do I have to do it over again?
Thank you so much. Yes you need administrative permissions when you install active directory. Maybe you have to reinstall windows. And make sure you login as administrator
great video I ran into some issues surprise its windows. open network after earlier reboot right click on Nic error windows cannot access the specified devices... Either way went direct to Control.exe and opened the file kept it moving. also I didn't run into the same troubles w/ the dns admin that required a new ptr for you strange I blame windows lol thanks for the video and cheers!
love your video! Very through and easy to follow. However, I must have messed up or done something wrong. I have a dell xps tower on my network with windows 10 pro and it will not join the domain nor use the dns server:{ not sure what I have done wrong.
@@johntanner611 on creating an image I don’t think I do. But I have some installing windows 10. What is your goals with creating an image? Like with what app?
@@InfoSecPat Like using WSIM to create an anwser file and sys prep to capture my image. I just have had some difficulty with the anwser file. I thought I had everything correct, but I will not let me login using the credentials i set in the anwser file. I am learning all of this so any extra knowledge would be greatly appreciated!
Your content is awesome but no matter what I do, I get server: unknown. I tried many times. Recreated PTRs etc. I am practicing on a vm server 2016 datacenter. I couldn't resolve this issue. I am confused with which IP addresses should be used where while creating reverse lookup. My IP address are very different from yours and they are different for DNS and actual IP address of the machine. Please can you explain me how to resolve this? Thanks!
Thank you for the comment and the compliment. It has to be something with DNS if you’re having issues. Just make sure your configuration is all correct. If you want, you can reach out to me on discord or anything like that to try to take some pictures to see if I can help you.
@@InfoSecPat Hi, I have ESXI in my VMWorkstation according to your video. Then I did a Server 2019, and then I get stuck.. Been watching your video's all day. but not finding it. This is my setup. Internet ---> router. from my Router ---> Laptop on my laptop I have VMWare Workstation Pro Installed ESXI 6.7 within ESXI, I created a 2019 Server, and setup as a DC with DNS and DHCP (not sure if that is configured right. my laptop has IP 192.168.1.9 and Gateway with DNS set to 192.168.1.1 (my router IP) For ESXI I used 192.168.200.0 and for the Server within 192.168.200.1 And that's where i get stuck
@@perrykappetein9685 Yeah looks like they’re on two different networks. If you want you can send me a message on my Instagram. Or Twitter maybe we can do a remote session one day and we can check out your configuration. Let me know if that works for you I would love to try to help you out
Bro I’m using SERVER 2019 & client windows 10 pro I can ping my SERVER from client in both FORWARD n backward lookup but I’m unable to join my Client to SERVER please help I followed each step EXCEPT LAST netdom query fsmo it’s not working out Please help me bro
For someone who calls themselves infused. I feel you should know better than to call your Server XXXDC. It's a bit obvious which server to go and hack first!!!!!!
Thanks!
No problem! You’re welcome. Thanks for the SuperThanks :). You are so nice for that.
Shoutout to all of my Super Fans!!!!
OMG...thank you SO much. I was troubleshooting an issue with joining the domain and decided to completely re-install Server 2019 and follow your video. FINALLY, things are working. THANK YOU!!!!
Awesome I’m glad and you’re very welcome. I’m super excited that my videos were able to help you with the challenge that you faced. Hopefully more of my videos can help you with your journey. If you have any recommendations let me know and I’m more than happy to help with that.
Even after 4 years the video was released I watched it and understood it perfectly, thank you
Glad it helped! Thank you for the comment that means a lot to me.
after a full days struggle this video made me get it right. Thank you so much!!!
Thank you I really appreciate the comment on the video. You’re very welcome I’m glad it was helpful.
I have been avoiding setting up an active directory lab for a while but thanks to you I got it done tonight ! Much love !
Glad I could help. I’m glad my steps helped you out. Feel free to watch the 2019 or 2022 playlist I do a lot of system administration videos.
Going to have to watch this at least 10 times to understand and set up at work. Wish me best of luck so I don't screw up the office network.
Good luck and if you have any questions, feel free to join my discord and I can support you in anyway. Good luck you got this.
What’s your discord bro. I have been setting up my also
Troubleshooting is one of the least used training techniques. I liked the fact that you showed us the fix
Yeah I believe the same thing. Thank you for viewing and share my channel with others. I appreciate it.
Thank you so much for your time and effort. Absolutely simple and easy to follow 🙏🏼
You’re so welcome. I’m glad it’s helpful
ABSOLUTELY Great video. Really reminded me of being in uni doing cs courses. But you does it more thoroughly than my lecturer. THUMBS UP
Thank you so much I really appreciate it. I try to explain in simple terms. I appreciate the kind words thank you for watching.
This is sweet thanks for sharing. Super helpful. Keep up the good work Pat.
he is good and i'm glad i found this channel. I hope he puts new videos every week.
Yes I will put more videos and thank you for the comment.
keep it up for a new youtuber you are great, hit that 1k soon.
William Rincon I hope I can get that 1000 subscribers. Thanks for your support
When you showed how you disable IPV6 as a habit, that helped me resolve an issue I was having with NSLOOKUP not displaying the server-name properly - thank you this helped a lot!
No, that’s awesome. Yes IPv6 causes problems when you do in DNS look ups. But I’m glad that was helpful. And thank you for checking it out.
Thanks for the live demo.
For a change, I am getting flawless installation (clean on first attempt) & the instructor getting enormous errors on the way. :)
Glad it helped!
I like your troubleshooting. I struggled a lot with DNS causing the Exchange problem.
Thank you so much I appreciate it.
All worked nicely until 18:55. After, when trying to ping from another computer, the ping IP worked but ping domain no. I assumed there is a DNS issue but I have not been able to resolve it
Nice video keep putting windows server videos that are good and helpful.
thank you so much.
Great content, helping the community. Keep it up man!!
Thanks! Will do! I appreciate it so much.
A big question: what network connection should I select for the virtual server? NAT, Custom or Bridged? Thanks!
I would just use NAT. You can set up the IP subnet or whatever you want.
Issue
I couldn’t get HOST(A) addresses in DNS forward look up zone
Can you please help me out
Thanks
Thanks, man! you help me a lot. I was in very trouble with DNS configuration.
You are welcome! Glad it was helpful.
Hello , I love this video but i have a question, can other computers not in the same domain use this server as their DNS server too ?
Been amazing! Thank you
You're so welcome! 😉
Thanks for the lesson sir! But let say if I make a separate dns server on centos7 and dont install dns services in windows servers would it still become a domain controller
Thank you so much for your help! I reference this every time I setup a Server !
Glad it helped! You are welcome anytime. I am glad you watched it and its helpful.
Very clean video. Thank you my friend.
Thanks for watching!
Thank you. was able to follow your steps exactly.
You're welcome! It’s my pleasure
It possible to apply with just 2 laptops
Would I be able to add windows 95 to the windows server 2019?
Good video man! Thanks for your help
Thank you and you’re welcome 😉
very helpful man good vid ........🙂🙂🙂🙂🙂🙂🙂
Glad it helped. Thanks 🙏
@@InfoSecPat sir . i need help i have MSI B660M-F mother board i need LAN drivers
for windows server 2019 Please HELP ........
hi, thanks for sharing this knowledge. may i know your server specs for this configuration or your min. recommendation as i'm really interested to try it?
hey there, i set up the DC and DNS server as shown. I was able to join the domain with my workstations, but they don't have internet connection when the DNS address is pointed at the DC (works fine with auto, but i lose domain access)The DC has internet connection if i set the DNS address to 127.0.0.1/8.8.8.8/auto. but if i point it at the DC's IP address, that loses internet connection too. Did i mess up setting up the DNS?
same issue for me
Hello - all of the videos are brilliant to watch. Can I ask how you would set up Server 2019, connecting two or more windows 7 or 10 clients but not using virtual machines. I have laptops with server and client software ready to go. Do I follow same approach? Not sure how to configure addressing and to allow internet access through the server I guess, but via ethernet to the clients. Any guidance would be appreciated. Thank you
Hello. nice video. How did the Windows 7 machine reach the new dc? Did you add the dns to W7/W10 before the video?
yes it had DNS setup for sure. Thanks for the support.
@@InfoSecPat Thank you! couldn't figure this out
Thank you professor!
You are welcome! I try and give back to the community
Thanks! It helped me a lot for setting the new server.
You’re welcome. I’m glad my videos can help you.
Hope you have a blessed day too brother.
I appreciate it. Thanks 🙏
thanks for the post. used it to start setting up an AD.
Glad it helped!
What a great instructor, and video, thank you, lookingto learn more on linux
Glad it was helpful! Thanks for the kind words.
Question does this work with the essential edition of windows server 2019?
What are you trying to do with the essentials edition?
Hey! thanks for the vid. what DNS settings to I need to change on the Win7 side? I can't ping the domain server.
you have to make sure you are on the same network, and make sure the windows firewall is off on the server.
@@InfoSecPat nvm i had to make sure that i had the DNS settings set correctly
Great commentary, clear and concise.
Thank you kindly!
ADDS is good techy things. love how to did the video, learned something. Thanks
Thank you Eddie. More to come.
I followed your instructions, and as soon as it rebooted after installing the active directory. Just sits at applying settings.
Hey, how’s it going? Once you install active directory and you promote to a domain controller. Once you reboot, you should login with the domain admin account.
Great Step by Step video @InfoSec Pat.
Thank you Joseph. I appreciate buddy.
Don’t you need DHCP with DNS ?
did the pc you connected to the domain have a static IP or DHCP is running?
yes its static IP on my client
Hey...hope you are doing great. I notice you mixed the network class when you assigned your fix IP address to your server. If you notices when you type your IP address: (172.16.20.5/20)
Your CIDR value /20 belongs to a Class "B" network...I stopped watching the video because I didn't think it was going to work and that all subsequent moves would be hinky
Perfect video, thank you so much!
You’re welcome 😉. It’s my pleasure
Clear and very useful. Thanks
Glad it was helpful!
Hello from Brazil!
Hello there!
how to add ip static before add dns server
Great video bro
Thanks I appreciate it! 🙏
Failed to ping. I have two virtual windows open, One is DESKTOP, and the other is for Win2k19. ping on the DESKTOP is not working. Is this because both desktops aren't in the same environment?
Thanks good video.
Glad you liked it! Thanks 😊
great video and thank you so very much sir...but some steps were not clearly explained especially during reverse lookup, and it would be very helpful if you could increase the size of the screen...its very tiny.
InfoSec Pat can you help me, im desperate, i cant create a domain because every computer in my home says that the specified domain does not exist, when i watched your video i decided to restart everything and i retried to create a domain but now even if i open some admininstrative tool it says the same error as before and when i start the server it takes a lot of time to load (because i think the domain is unreachable)
check the DNS settings. Sounds like that is not setup right. do NSLOOKUP to the domain and make sure its seeing the correct IP address to the DC. Thanks
@@InfoSecPat what dns should i put?
If you have set up the domain and are trying to add computers to it, make sure you set the computer's DNS to the IP of the Domain controller/DNS Server
@@thegolfnut68 i have already done it, i followed this video step to step and i even upgraded my sevrer to windows server 2019 and i made it
Thank you sir ❤
Most welcome
Awesome video, I'm not sure if you'll see this, but I guess I didn't have administrator privileges when I tried this. As a result, I don't have permissions to view many menus in Windows. Any suggestions or do I have to do it over again?
Thank you so much. Yes you need administrative permissions when you install active directory. Maybe you have to reinstall windows. And make sure you login as administrator
great video I ran into some issues surprise its windows. open network after earlier reboot right click on Nic error windows cannot access the specified devices... Either way went direct to Control.exe and opened the file kept it moving. also I didn't run into the same troubles w/ the dns admin that required a new ptr for you strange I blame windows lol thanks for the video and cheers!
love your video! Very through and easy to follow. However, I must have messed up or done something wrong. I have a dell xps tower on my network with windows 10 pro and it will not join the domain nor use the dns server:{ not sure what I have done wrong.
Just make sure DNS is pointing to the domain controller. That’s the most important thing when you’re joining a computer to a domain.
@@InfoSecPat Thank you! I got it on my domain! I now am trying to learn how to create my own image of w10. Do you have videos about that?
@@johntanner611 on creating an image I don’t think I do. But I have some installing windows 10. What is your goals with creating an image? Like with what app?
@@InfoSecPat Like using WSIM to create an anwser file and sys prep to capture my image. I just have had some difficulty with the anwser file. I thought I had everything correct, but I will not let me login using the credentials i set in the anwser file. I am learning all of this so any extra knowledge would be greatly appreciated!
Great video..🐱👤
Thank you very much!
love u💗💗💗💗💗💗💗💗💗💗💗💗💗💗
Nice work.
Thanks so much.
Your content is awesome but no matter what I do, I get server: unknown. I tried many times. Recreated PTRs etc. I am practicing on a vm server 2016 datacenter. I couldn't resolve this issue. I am confused with which IP addresses should be used where while creating reverse lookup. My IP address are very different from yours and they are different for DNS and actual IP address of the machine. Please can you explain me how to resolve this? Thanks!
Thank you for the comment and the compliment. It has to be something with DNS if you’re having issues. Just make sure your configuration is all correct. If you want, you can reach out to me on discord or anything like that to try to take some pictures to see if I can help you.
How do I make the internet connection to work, so I can go on the Web?
are you using NAT? Are you running in a VM? Make sure you have the gateway in the VM pointing to the router on your network.
@@InfoSecPat Hi, I have ESXI in my VMWorkstation according to your video. Then I did a Server 2019, and then I get stuck.. Been watching your video's all day. but not finding it.
This is my setup.
Internet ---> router.
from my Router ---> Laptop
on my laptop I have VMWare Workstation Pro
Installed ESXI 6.7
within ESXI, I created a 2019 Server, and setup as a DC with DNS and DHCP (not sure if that is configured right.
my laptop has IP 192.168.1.9 and Gateway with DNS set to 192.168.1.1 (my router IP)
For ESXI I used 192.168.200.0 and for the Server within 192.168.200.1
And that's where i get stuck
@@perrykappetein9685 Yeah looks like they’re on two different networks. If you want you can send me a message on my Instagram. Or Twitter maybe we can do a remote session one day and we can check out your configuration. Let me know if that works for you I would love to try to help you out
@@InfoSecPat That would be awesome. Let me contact you on one of the 2 platforms
@@InfoSecPat Messaged you on Discord. I tried sending a message on Twitter, but it's not allowed. mine is @pksoftgames
Network Design would be nice ....
Yeah thanks.
many thanks
You are welcome
Bro
I’m using SERVER 2019 & client windows 10 pro
I can ping my SERVER from client in both FORWARD n backward lookup but
I’m unable to join my Client to SERVER please help
I followed each step EXCEPT LAST netdom query fsmo it’s not working out
Please help me bro
Make sure you assign the client machine, the DNS server that you made the domain controller
my machine does no seem to ping the ip
make sure the windows firewall is off
@@InfoSecPat on the server or client or both sides.
Thanks!
You’re welcome ☺️
I need slides please can I get it from you??
Thks
You’re welcome 😉
need a magnifying glass to watch this vid
Check out the Windows Server 2019 Playlist. I added more videos about server 2019. Thanks
For someone who calls themselves infused. I feel you should know better than to call your Server XXXDC. It's a bit obvious which server to go and hack first!!!!!!
This is for a lab, not prod. It is for someone that is trying to learn to setup and configure a DC.
You go too fast, you start clikcing all over the place w/o explaining what you're doing. Very frustrating to "look over your shoulder".
Slow...the....ef....down