Excellent instructional video Tom, again great presentation, using my FTDX10 setup with my Microham USB Keyer 3 to work with Log4Om 2 Ver 2.34.0.0 testing with dummy load and logs QSO, plus the Microham Keyer 3 also transmits it's own CW messages on testing as well which is another Bonus, kudos to you Tom for the video.. regards Greeting from England 73 M0MGX
Thank you SO much for your explanation!! I have had a WinKeyer for several years but could never get it to work with my KX3. Turns out that I did not know about the Port Settings needed for the WinKeyer, which your video detailed. Once I made those changes to what had been my default settings for the WInKeyer Port, everything worked great!!! Many thanks. Jim N7RCS - Palm Bay, FL
Hi Tom KO4IOL Jorge I already have the WINKEYER USB to do CW but already connected everything well but when I test the messages on the radio Yaesu 991A it does not transmit. I have to make changes in the configuration to be able to transmit,
Hi Tom, Duncan here, HP1CDZ, I have sent You an email but seems You haven't received it., I have set up my WKUSB however I don't have a Key/Paddle and must use my computer. when I tried to activate my device (; WKUSB) Will not tx using the WKUSB when punching the 4 buttons on top of the cage (red + 3 black buttons) can you help me wz tz? 73's ..... Duncan/hp1cdz
Hi Duncan…. Go to hamcrafters2.com/WK3tools.html and download the WK3tools 5.3 s/w and the associated guidebook. You’ll be able to connect your wkusb and define your messages. Use the guidebook for more info. Hope this helps
@@ND3N Fine business Tom, tks for Your fast reply., Yes, I have programmed the device, however, when tried to key in the Red or other buttons will not work b'cause when I connect the CAT of my FT991A, will automatically disconnect the WKUSB device, is there a way to activate these buttons, use my FT991A without the Key/Paddle? In your video we notice You are using your Key or Paddle, how to do without the Key/Paddle using just your computer, sorry to bother you.
@@ND3N Good evening Tom, OK for the WK USB SERIAL CH340 (Com21) for the radio TS590S SILICON Labs CP210X USD TO UART BRIDGE (COM15) I haven't connected my CAT CONTROL SERIAL PORT ......
Great video Tom. I got the Winkeyer setup tonight thanks to your video. Thanks, Jim
Excellent instructional video Tom, again great presentation, using my FTDX10 setup with my Microham USB Keyer 3 to work with Log4Om 2 Ver 2.34.0.0 testing with dummy load and logs QSO, plus the Microham Keyer 3 also transmits it's own CW messages on testing as well which is another Bonus, kudos to you Tom for the video.. regards Greeting from England 73 M0MGX
Great video OM! Thanks
Thank you SO much for your explanation!! I have had a WinKeyer for several years but could never get it to work with my KX3. Turns out that I did not know about the Port Settings needed for the WinKeyer, which your video detailed. Once I made those changes to what had been my default settings for the WInKeyer Port, everything worked great!!! Many thanks.
Jim
N7RCS - Palm Bay, FL
Glad I could help!
THANKS for another excellent video Tom. I have ordered my WinKeyer based on your informative videos. Daryl de VK3AWA
thank's Tom for the nice video ... 73s de DL6RDE / AA1KD, Charlie
I'd like to see a video detailing Yaesu FT-710, FLdigi and Winkeyer3 integration for CW and RTTY HW/SW setup/operation.
I can do that…. Thanks
Hi Tom KO4IOL Jorge I already have the WINKEYER USB to do CW but already connected everything well but when I test the messages on the radio Yaesu 991A it does not transmit. I have to make changes in the configuration to be able to transmit,
I don’t see a problem ??? Set up your functions as if your winkeyer is a straight key and it should work well
I have a FT 991 how do I connect a monitor to it Thanks M7XIX 73.
Hi Tom, Duncan here, HP1CDZ, I have sent You an email but seems You haven't received it., I have set up my WKUSB however I don't have a Key/Paddle and must use my computer. when I tried to activate my device (; WKUSB) Will not tx using the WKUSB when punching the 4 buttons on top of the cage (red + 3 black buttons) can you help me wz tz? 73's ..... Duncan/hp1cdz
Hi Duncan…. Go to hamcrafters2.com/WK3tools.html and download the WK3tools 5.3 s/w and the associated guidebook. You’ll be able to connect your wkusb and define your messages. Use the guidebook for more info. Hope this helps
@@ND3N Fine business Tom, tks for Your fast reply., Yes, I have programmed the device, however, when tried to key in the Red or other buttons will not work b'cause when I connect the CAT of my FT991A, will automatically disconnect the WKUSB device, is there a way to activate these buttons, use my FT991A without the Key/Paddle? In your video we notice You are using your Key or Paddle, how to do without the Key/Paddle using just your computer, sorry to bother you.
That’s strange because the cat controls have nothing to do with the wkusb. What serial ports are you using for the rig and the wkusb
@@ND3N Good evening Tom, OK for the WK USB SERIAL CH340 (Com21) for the radio TS590S SILICON Labs CP210X USD TO UART BRIDGE (COM15) I haven't connected my CAT CONTROL SERIAL PORT ......
Way too fast to follow the mouse to see what was selected to complete the first message.
Slow down for new users.
Sorry bout that