Hello! A year later lol! Just finished most of the installation all I have left is to pass through the firewall (ran out of daylight while outside) is there a tip/trick to run it through the firewall inside? I was having a difficult time trying to see where that entry point is, thanks again!
Look by your foot rest underneath the steering wheel. You literally have to punch through , you will see a rubber grommet. You have to pierce through that.
There is a rubber grommet that passes through the firewall. If you look from the inside at your foot well, you will see the wiring lead from where you gas cap latch is , forward and towards the engine bay, it hugs the wall which punches into the engine compartment.
I don't see a link to the lights you have and the mounting bracket to the hood - can you post a link or list the item model and where you get them? Thank you!
I just checked and it looks llike the brackets are no longer available. Look for brackets compatible with Tacoma's. This is what these were for but fit perfect on the GX.
Hey there, quick question. After trying to order the bracket, I was wondering what are you using for you GX? The 2005 -2015 bracket or the 2016-2020 version? Thank you for your help
Quick question, so I ordered the light bracket off the link you provided in the description. But I'm having a hard time installing it onto the hood latch. Unlike yours that come up and curve at a 90° angle mine doesn't come up and curve at the 90° at all. Wondering if Amazon sent me the wrong product?
@@mktina3657 Thanks! I'll give that a try👍🏼 I’m starting to think the bracket I received is a "low profile bracket" apposed to the one shown on this video.
Just finished this same project on my 100 series LC today. Wish I had watched this first!
Woah!! That’s super bright and I love it!
They work super good in the country side!
Wanted to let you know the Wiring harness link is still popping up as the brackets link
Hello! A year later lol! Just finished most of the installation all I have left is to pass through the firewall (ran out of daylight while outside) is there a tip/trick to run it through the firewall inside? I was having a difficult time trying to see where that entry point is, thanks again!
Look by your foot rest underneath the steering wheel. You literally have to punch through , you will see a rubber grommet. You have to pierce through that.
Can you update the link to the wiring harness please! Thanks!
Did you notice any increased wind noise on the highway?
No, nothing significant at all
How did you get the wire from the fuse box into the car itself. You said you “pushed it through” but I can’t find anywhere to do just that 🤔
There is a rubber grommet that passes through the firewall. If you look from the inside at your foot well, you will see the wiring lead from where you gas cap latch is , forward and towards the engine bay, it hugs the wall which punches into the engine compartment.
I don't see a link to the lights you have and the mounting bracket to the hood - can you post a link or list the item model and where you get them? Thank you!
www.amazon.com/dp/B01KRV3PNA/ref=cm_sw_r_cp_apa_fabt1_LhgVFb74BDT84?_encoding=UTF8&psc=1
I just checked and it looks llike the brackets are no longer available. Look for brackets compatible with Tacoma's. This is what these were for but fit perfect on the GX.
@@YeloGX Thank you!
@@YeloGX Ok, I will search.
You gotta get a new battery tie down bracket
haha yes i do. thanks for noticing and reminding me.
Hey there, quick question. After trying to order the bracket, I was wondering what are you using for you GX? The 2005 -2015 bracket or the 2016-2020 version? Thank you for your help
2005 to 2015 according to the description on Amazon.
What hoodie is that u got? Is that a 350z
It's a ringbrothers hoodie. Look em up!
I can't find a video that doubles ditch lights as turning signals too..
Ahh no I haven't found that. That would be sick!!
Quick question, so I ordered the light bracket off the link you provided in the description. But I'm having a hard time installing it onto the hood latch. Unlike yours that come up and curve at a 90° angle mine doesn't come up and curve at the 90° at all. Wondering if Amazon sent me the wrong product?
You could try putting the bracket in a Vice with wood so you don’t scratch it and bend the brackets to the needed angle.
@@mktina3657 Thanks! I'll give that a try👍🏼 I’m starting to think the bracket I received is a "low profile bracket" apposed to the one shown on this video.
@@ybdizz dang I missed this!! What came out of this? Did you fix it?
Any idea if these brackets are going to be compatible with a 2015 GX 460?
I do not know this . Sorry!
How did these cheap brackets hold up?
still holding and working out fine.
👍🏽👍🏽👍🏽👍🏽