JOHN DEERE PENCIL FUEL INJECTORS REPLACEMENT Made Easy | John Deere 4.5L 6.8L POWERTECH

JOHN DEERE PENCIL FUEL INJECTORS REPLACEMENT | John Deere 4.5L 6.8L PowerTech.
Pretty much everything you need to know how to remove and install pencil style fuel injectors on John Deere 4.5L, 6.8L diesel engine without any specialty tools.
John Deere Fuel Injector Removal Made Easy.
Part # SE501103 John Deere OEM Reman Injection Nozzle Injector or #RE531436 OEM New John Deere Stanadyne Pencil Fuel Injector
Enjoy.
#JohnDeere #fuelinjector #pistonshack
JOHN DEERE FUEL LIFT PUMP REPLACEMENT | JOHN DEERE POWERTECH 6.8L 4.5L
• JOHN DEERE FUEL LIFT P...
HEAVY EQUIPMENT BAY Playlist:
• HEAVY EQUIPMENT BAY
DISCLAIMER:
This video is only for entertainment purposes. If you rely on the information portrayed in this video, you assume the responsibility for the results.
Due to factors beyond the control of PISTONSHACK, it cannot guarantee against unauthorized modifications of this information or improper use of this information. PISTONSHACK assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. PISTONSHACK recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of PISTONSHACK, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not PISTONSHACK.

[@PistonShack]

More John Deere Videos: JOHN DEERE FUEL LIFT PUMP REPLACEMENT | JOHN DEERE POWERTECH 6.8L 4.5L th-cam.com/video/Usurbkt1N74/w-d-xo.html
TREE STUMP VS EXCAVATOR or HOW TO REMOVE STUBBORN STUMP | John Deere 2054d
th-cam.com/video/dgcN5v7VY0A/w-d-xo.html
TRACTOR IGNITION KEY SWITCH WIRING | Universal Ignition Switch | JOHN DEERE 2130
th-cam.com/video/_D4t4hwWj0A/w-d-xo.html

[@PistonShack]

Thanks for watching!

[@reloadnorth7722]

My buddy has a bad injector in a 1995 JD 240 skid steer. Same pencil injectors. This video makes all the difference to change them. Thankyou.

[@PistonShack]

That's so cool! I am glad this video helped you out. JD 240 has four cylinder engine, right?

[@reloadnorth7722]

@@PistonShack No. 3 cylinder, 2.9 litre engine, no turbo.

[@austinkrinke5308]

Very helpful. Thanks.

[@PistonShack]

Glad it was helpful, Austin!

[@jxp2212]

Big props for being so consistent with the videos coming out 👍

[@PistonShack]

Yeah, I do what I can)

[@plainnpretty]

Thanks for sharing this . I had one stuck in my 310 backhoe took me 2 weeks to get it out . I’d work on it a little then work on other things but I got it out using a homemade puller .

[@PistonShack]

Glad it helped, buddy! How's your repair? Any luck to get injectors out?

[@plainnpretty]

@@PistonShack yes I have new ones in now but one of the steel lines was leaking. I had to order a new one so I’m waiting on it .

[@jxp2212]

Great production and very informative uploads!

[@PistonShack]

Much appreciated!

[@igostupidfast3]

mini slide hammers are great for stuck small things

[@PistonShack]

Good point! I should get one for myself! Can you recommend any specific model or brand.

[@igostupidfast3]

@@PistonShack i use harbor freight, (the 2 pound pittsburg model)

[@PulsarTECH]

Thanks for your video! Very interesting tutorial!

[@PistonShack]

Glad you liked it!

[@sbmasson]

Thanks for the video.

[@PistonShack]

You are welcome Bruce! Thanks for watching)

[@tonypadgett6641]

Thank you for your help and expertise! Great video

[@PistonShack]

Glad it was helpful Tony! What kind John Deere machine do you have?

[@rustompilapil9839]

good day sir, what is the possible reason why no deseal appears in the injectors? Thank you

[@rustompilapil9839]

I am from the Philippines sir.

[@thomassolutions7888]

Thank you ,very good,,Very good video

[@PistonShack]

Glad you liked it Thomas! What kind JD machine do you have?

[@WarpedSpeed]

I have a John Deere 1120 tractor and it was virtually identical to replace the injectors (3 cyl 2.7 L) the High Pressure line was held on with the 3/4 female but also needed a 9/16 to hold male on injector end. The replacement injector did not have male on injector. The low pressure fuel return lines were just push on rubber fuel lines, and I needed a 5/8 wrench to tighten a male flare fitting.

[@PistonShack]

Hey Gerald. Thanks for sharing your repair experience!

[@sinenomine9093]

Thanks, in the process of replacing an injector on my JD 2755 farm tractor, very timely.

[@PistonShack]

Glad I could help! Let me know if you have any questions. Cheers Sine!

[@blacktranch]

I have a leak coming out right under the return lines on top of injector 3 and 4, but my tractor still runs good. What do I need to replace?

[@mygarden365]

Thank You.

[@PistonShack]

You're welcome! Thanks for your feedback.

[@jimgomolka2132]

Thank you for your video! I just replaced mine and now there is a rapping sound and vibration coming from one cylinder. Sounds and feels like a hammer tapping the injector from the bottom... Any ideas what is causing that?

[@PistonShack]

Glad it helped Jim. Check if injector fires or not first. Also look for any injector damage or carbon/oil deposits.
It could be dead valve lifter or valve lash out of specs.

[@carlosmoreira1788]

Great video!
I do have a question on a jd200clc and it started leaking from the cap and even two of them became loose. From your experience what can be the cause? Threads are ok

[@PistonShack]

Hey Carlos! Those injector caps known to leak. I have seen people overnight cap then they start leaking. Check for any cracks or worn out o-rings. I would replace leaky once anyway. Thanks for your feedback.

[@maxmoo3275]

torque specs on hold down clamp bolts?

[@jmrm3627]

Any one knows what is the psi setting on this injectors? I am trying to calibrate mine after I cleaned and unclogged them.

[@wallis066]

I it necessary to adjust these after they are installed

[@PistonShack]

There's no adjustment.

[@trail457]

I thinkthe dealers use a special slide hammer to get them out.

[@PistonShack]

Yeh, there's special tool.

[@edwinmadeley]

Where are the glow plugs??

[@stevebarz5125]

Use a slide hammer

[@thatsprivate6478]

My

[@wayneferagen2332]

Do you consult or help out FaceTime I have a John Deere 243 cylinder diesel which is not starting that I bought and there’s a little bit of blow wind coming from the top when I took the valve cover off but I don’t get any kind of attempt to start when I try. Anyway we can FaceTime on the phone and go over what I got I can pay for your time