How to install TST Running Mate on Kawasaki Nexus LED Turn Signals
ฝัง
- เผยแพร่เมื่อ 11 ก.ค. 2022
- Our TST Nexus Running Light Connection Kit provides you with the necessary components to create a function for your for your Kawasaki and Nexus Turn Signals. We include a specialized wire harness and the required installation components to help you add some extra style and functionality to your Kawasaki Ninja.
Get Nexus Running Light Kit here: bit.ly/3P4OZuy
Make sure to subscribe here: bit.ly/1jq2ZrN
Follow us on Facebook here: on. 1nuTjlF
Follow us on Instagram here: / tstindustries
Follow us on Twitter here: / tstindustries
Want to add a running light to your TST LED Nexus signals? We do too! That's why we developed this specialized harness and paired it with the necessary wiring kit you need to add a running light circuit to your Kawasaki. Since there isn't a running light connection from the factory, we include a simple way of tapping into a 12v ignition switched power source (on/off with the key ignition) to create your own. The included positap connectors make this process super easy, and the harness converter features OEM style plugs so there's no messing with splicing or soldering. The specialized wire harness goes between your Nexus signals and your bike's factory harness, plugs in with ease, and utilizes the new running light circuit you created. Once installed, our kit creates a daytime running light of 80% brightness to not only add some sick styling to your Ninja, but also increase your visibility to others around you. With installation this easy, this important feature is a must-have upgrade for your Kawasaki. - ยานยนต์และพาหนะ
I never thought you could make the Nexus even better. Well done.
And we might not be done yet... 😉
@@TSTindustries Switchback white running lights / amber turn signals? that would be dope.
Go all out and make a new flasher relay that doesn't have that annoying lag delay. That would be super dope
This is very sick. Imma buy it
Awesome kit, should make running light kits for more bikes like 1st and 2nd gen BMW s1000rr
Woah. I need this 🔥👌
You know where to find us! 😉
Amazing video!! Purchased pretty much all the TST protection sliders, fender eliminator with smoked tail light already. I wasn't going to do the running lights, but just found this video and since my bike is a 23 Ninja 650, pretty much will mirror this installation! Just a quick question-I will be using the accessory plug as I am going to do a USB charger/voltage reader.
Would it still be ok to tap and plug into this for power or would that be to much power draw using USB charging with the running light? Should I just use the running light plug? I remember you saying you like to keep all your lighting on the same circuit. I think the running light plug is the one right below the accessory plug that you were holding and talking about correct? You were also holding the running light cable on the left with the wires going into the running light when you were talking about connecting it to the posi-tap. If I were to use the running light does it matter if I tap into the powered wire going to the running light or the right side wire bundle? Sorry, just want to make sure I do it correctly. thanks again for amazing products!
Just ordered the kit with running light for ZX 6R 636
I bet you will really enjoy the end result on your bike
Please make one for the 2012 N1K! We need an upgrade 😳
Question.. are you working on a switchback design ? (Daytime running led lights that can switch to amber for turning signals)
Technically, these do have that function. If you're looking for another color for the daytime running light function and then amber for the signal function, we may look into that for future production runs if the demand calls for it. -TST
Hey for the 2023 650 Ninja, the bikes harness connector is different and your signals still work but they don’t connect properly because the new OEM connector is bigger. It will require an adaptor.
We offer an adapter for the 2023 Ninja 650 when the Nexus signals are purchased correctly using the drop-down menus on the product page.
Thanks for the reply. I’m not seeing an adapter that matches the description of the issue on your website using the menus. Can you provide a direct link for transparency?
@@Singsing001 a direct link wouldn’t solve much as the selection for the year range and model needs to be selected. Once the 2023 Ninja 650 is selected, we receive an internal alert to include the necessary adapter harness. If you’re facing issues or believe you selected the appropriate year but didn’t receive the harness, you can always email our Support Team for assistance, that’s what they’re here for.
tstindustries.com/tst-nexus-led-flushmount-turn-signals-for-kawasaki-ninja-sportbikes.html
is this going to be available in the hyperpack bundle?
We're testing out sales and demand right now. If it calls for it, we can absolutely add it into the Hyperpacks.
Did the RearSet ever come in? I need it
I don't understand your question.
Will it fit the ninja 1000sx 2023?
We have tried to install on that bike and they were able to be mounted physically to the bike. They did not produce a great cosmetic result though because some of the fairing lines produce gaps around the lights.
Does the 2023 Ninja 400 need this?
Does it need this? Only if you like it better than whats on your Ninja now. Will these work on the 2023? The answer is yes.
@@TSTindustries thank you! I got it working with what came with the kit and my signals now and got the proper wire taping etc.