I like that you're putting your tools back right away. In some of those other videos, they leave them on their tables, and I bet its a nightmare putting them all back.
@@JonathanGarcia-cy7hd nice! Let me know how it goes. I might make a new one to do a second “Custom Tool” video on the tool just to perfect it this time around👍⚡️
I too struggle with the hammer condurum and have bought tons trying to find the right fit. If you want the wiha hammer order from Amazon UK even with shipping it's ussaly cheaper. The hammer i use most is a pb swiss double sided hammer with one side being steel. Its actually kinda useful and it's under 12in long kinda small. If that price scares you park tools the bike company makes a dirt cheap one with steel/rubber just a tad bigger. If you keep blowing up tooks get a volt claw the black one. It has saved me in pannels and ton and no chance a peice of plastic is conductive yet can grab wires. I do have the knipex plastic fisher price needle nose as well but kinda bulky but for main lugs or big cable live you gotta what it safe. I'm impressed with the damage to that hvac demo driver 👏. I don't much care for the reamers they sell so I got the klein one you can add to any screwdriver shaft (has a set screw). I currently have mine on my wera all black 12mm demo driver (20 to 25 on az). Its not the chisel drivers and it is thick makes that milwaukee look like a toothpick. I lve pinned a excavator bucket in place with it s time or 2 for alignment. I would suggest that reamer attachment and put it on the beater of your choosing and free up a handle or add another flathead to the bag. I too like big side cutters and cobolts from knipex. Side bads for your bags is always a good thing as long as you can keep the weight down. Good video thanks for making them 👍.
@@MattHmm-rq6dn if I did get a fancy hammer I’d get the Hultafors it’s black. I’ve been looking at the black wera drivers as well. And as for the Milwaukee beater I’ll just say I was in an old panel banging a little too hard on a painted over knockout. After so many years sometimes get to comfortable I guess lol
Awesome setup buddy 👌 I have a lot of the same. My issue is I load up too much in my bags. I do commercial, light industrial, and some residential occasionally. I try to setup bags/pouches by whichever type of work Im doing, but end up with SSSSOOOO much 😂
@@bradw0535 nice you have a healthy mix of experience! man I’m the same way that’s why I opted out for the OT-MC. Always end up overloading these things
I own a pair of the knipex strippers. I do love them but personally I don’t think they strip wire any better than the Klein. The best part is the cutters but you could go get a pair of the knipex step cuts and be just as happy
@@codyhoward6509 an hour after I made this video I actually found a pair online for sale ($40 brand new) so I have them now. Loving the cutters like you said, as far as I can tell it will be a big adjustment tho👍⚡️
I like that you're putting your tools back right away. In some of those other videos, they leave them on their tables, and I bet its a nightmare putting them all back.
It’s the OCD kicking in 🫡⚡️
The ideal/Klein combo goes hard. I’m ripping that.
@@JonathanGarcia-cy7hd nice! Let me know how it goes. I might make a new one to do a second “Custom Tool” video on the tool just to perfect it this time around👍⚡️
I too struggle with the hammer condurum and have bought tons trying to find the right fit. If you want the wiha hammer order from Amazon UK even with shipping it's ussaly cheaper. The hammer i use most is a pb swiss double sided hammer with one side being steel. Its actually kinda useful and it's under 12in long kinda small. If that price scares you park tools the bike company makes a dirt cheap one with steel/rubber just a tad bigger. If you keep blowing up tooks get a volt claw the black one. It has saved me in pannels and ton and no chance a peice of plastic is conductive yet can grab wires. I do have the knipex plastic fisher price needle nose as well but kinda bulky but for main lugs or big cable live you gotta what it safe. I'm impressed with the damage to that hvac demo driver 👏. I don't much care for the reamers they sell so I got the klein one you can add to any screwdriver shaft (has a set screw). I currently have mine on my wera all black 12mm demo driver (20 to 25 on az). Its not the chisel drivers and it is thick makes that milwaukee look like a toothpick. I lve pinned a excavator bucket in place with it s time or 2 for alignment. I would suggest that reamer attachment and put it on the beater of your choosing and free up a handle or add another flathead to the bag. I too like big side cutters and cobolts from knipex. Side bads for your bags is always a good thing as long as you can keep the weight down. Good video thanks for making them 👍.
@@MattHmm-rq6dn if I did get a fancy hammer I’d get the Hultafors it’s black. I’ve been looking at the black wera drivers as well. And as for the Milwaukee beater I’ll just say I was in an old panel banging a little too hard on a painted over knockout. After so many years sometimes get to comfortable I guess lol
@@MattHmm-rq6dn appreciate you man🫡⚡️👍
Awesome setup buddy 👌 I have a lot of the same. My issue is I load up too much in my bags. I do commercial, light industrial, and some residential occasionally. I try to setup bags/pouches by whichever type of work Im doing, but end up with SSSSOOOO much 😂
@@bradw0535 nice you have a healthy mix of experience! man I’m the same way that’s why I opted out for the OT-MC. Always end up overloading these things
Klein makes great hammers too.
@@wim0104 I’ve had of the older style Klein hammers but I end up losing them, now I’m cheap with my selection 👍⚡️
I own a pair of the knipex strippers. I do love them but personally I don’t think they strip wire any better than the Klein. The best part is the cutters but you could go get a pair of the knipex step cuts and be just as happy
@@codyhoward6509 an hour after I made this video I actually found a pair online for sale ($40 brand new) so I have them now. Loving the cutters like you said, as far as I can tell it will be a big adjustment tho👍⚡️
Link?
@@adriandiaz8124 it was on the app OfferUp, listed for sale local to my area
❤❤❤
Ещё ещё и ещё Vera tools
@@vladimirrogozhkin love my wera drivers!⚡️🫡
@DelgadoElectric a have long ---
@@DelgadoElectric с длинным носиком, long nibble Wera