I hope everyone enjoyed this helpful and informative video! I cannot stress enough how important it is for you to share this video link with others if enjoyed it and support the creation of new videos on my channel. Thanks guys!
Personally I use a stethoscope with the hose left open at the end. This works for suspension noises as well and even better than leaving the metal pointer on the end. I agree 100% with your technique and am a 30+ year mechanic
Yes, a stethoscope with the end removed works great. What I show in this video is a very cheap alternative to a stethoscope for the average person. Thanks for watching!
I just wanted to say that this is a brilliant method. I have used the gas method and was always a litte eery about doing it that way but this is genius. I have a 4runner that has a misfire that I am trying to track down. Ive changed coil packs and plugs ands wires and the misfire remains so this is going to be my next move. Thanks so much.
Hope it works well for you. Just drag the end of the hose along all suspected areas. Thanks for watching! Be sure to rate thumbs up and share the video link with others.
Glad I could help! Be sure to look over my extensive video playlists below for many other videos of interest to you, and most importantly take one minute to share a link to my channel with others. Thanks th-cam.com/users/electronicsnmoreplaylists
I have a 2008 Sonata and im getting the code P0296. Im going to check for vacuum leaks first. Thank you for this video. Looks like the 2.4l engine also so perfect
You're welcome! Be sure to rate thumbs up, consider subscribing if you like a wide range of helpful and informative videos, and look over my extensive video playlists below for many other videos of interest to you. Taking one minute to share a link to my channel with others on social networking sites would be greatly appreciated. Thanks th-cam.com/users/electronicsnmoreplaylists
Great idea, is that slight whilstle that you get when you start the engine part of this leak too? I have a similar sound at the moment when at very low rpms static, and increases in pitch with a tiny bit of gas applied.. Also get some strange issues when hard accelerating at random, sometimes like the engine is juddering/sticking trying to reach the higher rpm after a gear drop.. A 2018 Mercedes 220 diesel engine.. Not good
i have a 95 lexus v8 sc400. I see smoke coming from the thick hoses towards the rear of the intake and close to the firewall. the hose clamps also look burnt and smell. There are fumes coming from the area. I have rough idle, and the rpm goes in the wrong direction when i rev the car. The exhaust has sputtering sound. Does this sound like vacuum leak ?
God tip. Another way is using starter fluid. Just spray it over hoses, manifold, injection valves etc when the engine is running at idle. A vacuum leak will increase the idle speed when sprayed.
Have an important question that is directly related to this video.. my question is did this vacuum leak which was on this engine did it happen to set any trouble codes or warning lights??????
@@electronicsNmore I ask because I believe I have a vacuum leak that isn't triggering any trouble codes but it's still compromising engine performance as well as breaking. If you don't mind me sharing, I first noticed something when my brake pedal no longer retracts back to full upwards position. And the engine doesn't start in the cold very easily.. have a fluctuating idle.. it just seems as life I'm not getting enough vacuum to operate the brakes properly. Because all of the brakes grab. As if it's not releasing. Because there's not enough vacuum. But that would seem like it need to be an awfully huge vacuum leak to ruin engine performance so badly as well as breaking constantly on its own. But I can't find the damn vacuum leak? My brother believed it was the idle air control valve and I didn't believe his diagnosis fully, because I think it was a little bit of both. A worn I don't air control valve or dirty pintle and seat.. or it was just going bad.. but we replaced it and it only helped in the way that it stays running a little bit better. It feels like there's some sort of vacuum gate that is not closing and even opening at random causing the engines idle to fluctuate and compromising breaking as well. Phew... Uhhg. I said a mouthful lol sorry
if it is a diesel, you will notice increase in idle rpm for a moment. that is becasue of diesel speed adjusted by fuel rate not air; in contrast of gasoline engines.
Ive always sprayed carb cleaner around to find vacuum leaks. When the carb cleaner hits a leak, engine rpm increases. The problem is that doesn't work with todays engines. The computers will keep the rpms steady even when spraying directly into the intake. 😔
I understand your point, especially since I have a friend that's an audiologist, but you'd be surprised how loud leaks will sound with that funnel tight against your ear.
We need to make a smoke generator ! And feed it to the collector under low pressure. You can even just make a cigarette out of it ))) You will see where the smoke is leaking from
I can assure you it works on big and small leaks. All you have to do if move the tip around suspected areas. Smoke method does work good, as long as you don't have a cooling fan blowing the smoke all around. :-) A minute vacuum leak on your car won't even be noticeable.
Plastic intake covers on many modern vehicles naturally make a hissing noise, so this would not be a very good method. Also, some vacuum leaks don't rear their ugly heads until the vehicle is under heavy load, so this method would only be good at detecting the type of leak that would affect the engine performance at idle.
That's wonderful YT for ya! They only notify a small number of my subs when I upload videos, and after they're uploaded, they get buried down the search results. Inferior videos get more views.
I hope everyone enjoyed this helpful and informative video! I cannot stress enough how important it is for you to share this video link with others if enjoyed it and support the creation of new videos on my channel. Thanks guys!
😊
Could not find a leak with a smoke test, found it in three minutes with this method, absolutely brilliant
Where was the leak at?
Personally I use a stethoscope with the hose left open at the end. This works for suspension noises as well and even better than leaving the metal pointer on the end. I agree 100% with your technique and am a 30+ year mechanic
Yes, a stethoscope with the end removed works great. What I show in this video is a very cheap alternative to a stethoscope for the average person. Thanks for watching!
How do you use a stethoscope for suspension please?I have a suspension problem i guess
@@denisouncho2513 You have to be able to duplicate the noise with the vehicle on the ground or on a lift. Obviously driving may pose a challenge
Another very helpful video that'll help a lot of people! Thank you and looking forward to your next video!
Thanks for watching! I greatly enjoyed your latest video!
Yall should do a cross over video 😄
I just wanted to say that this is a brilliant method. I have used the gas method and was always a litte eery about doing it that way but this is genius. I have a 4runner that has a misfire that I am trying to track down. Ive changed coil packs and plugs ands wires and the misfire remains so this is going to be my next move. Thanks so much.
Did it work?
Outstanding use of brains and stuff you have on-hand in the shop! 👍👏
Thank you so much for this very easy way of finding a vacuum leak. I will be testing it out on my nb tomorrow. 👍
Great trick. I'm going to add this to my arsenal. Thanks for teaching us this
Excellent very clever I actually have a need to utilize this on my 3800 V6 appreciate you coming up with the solution.
Hope it works well for you. Just drag the end of the hose along all suspected areas. Thanks for watching! Be sure to rate thumbs up and share the video link with others.
Brilliant. Love the perceived ease of it as well as the cost for the tool.
This is excellent. Will add this to the other options (propane, starter fluid, smoke test).
Thanks. I think I have a vacuum leak near the intake manifold in the car and wasn’t sure how to find it on the cheap. This is very helpful.
Glad I could help! Be sure to look over my extensive video playlists below for many other videos of interest to you, and most importantly take one minute to share a link to my channel with others. Thanks
th-cam.com/users/electronicsnmoreplaylists
@@electronicsNmore Thank you. I was gonna try the propane method until I found this video. 👍
Amazing work, great mind process. I will try it tomorrow. Thanks and God Bless
Good thinking 99!
I have a 2008 Sonata and im getting the code P0296. Im going to check for vacuum leaks first. Thank you for this video. Looks like the 2.4l engine also so perfect
Good idea was always taught to use carb clean and listen for the change this looks safer nice !
Brilliant. Such a time saver
Brilliant best best idea I've seen so far I shared the link to this video in several places.
Thanks for taking the time to share the video link!
that plastic stethoscope trick is pretty sick ngl, works well
Wow this actually really cool!
Simple but very useful. Thanks for watching!
Thanx for your clever solutions!
You're welcome! Be sure to rate thumbs up, consider subscribing if you like a wide range of helpful and informative videos, and look over my extensive video playlists below for many other videos of interest to you. Taking one minute to share a link to my channel with others on social networking sites would be greatly appreciated. Thanks
th-cam.com/users/electronicsnmoreplaylists
Thanks to your big info sir, very help ful tip
That is outstanding. Though it looks like a used PDQ Bach instrument.
🤣
Awesome! I don’t want set my car on fire with the break cleaner method 😊
Gm where u get your tube and small funnel from and tthanks for making tthis video
👍 👍 Another great tip.
Glad you liked it!
Next episode how to stop air leaks in those hard-to-reach areas with spray-in foam.
LOL
That is an awesome trick/tip. I've used long oil funnel but the hose is too cool. Thx
Glad it was helpful! Be sure to rate thumbs up and share the video link. Thank you
Excellent. Another great job!
It's almost (I'm not committing, damn it! I know better) :) Perfection.....
Great tip! Did I see some green coolant under where you had the leak?
No coolant leak. :-). I keep that engine tip top. Thanks for watching!
I am going to try this "EASIEST Way" on my Mazda tomorrow.
If there's a vacuum leak, you shouldn't have any trouble finding it.
Great idea, is that slight whilstle that you get when you start the engine part of this leak too? I have a similar sound at the moment when at very low rpms static, and increases in pitch with a tiny bit of gas applied.. Also get some strange issues when hard accelerating at random, sometimes like the engine is juddering/sticking trying to reach the higher rpm after a gear drop.. A 2018 Mercedes 220 diesel engine.. Not good
Great tip thanks.
Thanks, and you're welcome!
Great video..
You ever know what happened to "Photonicinduction"?
Thanks. I was wondering the same thing. Once or twice before he vanished for a period of time, but now it appears he's gone for good.
dude upload 2 videos this week
i have a 95 lexus v8 sc400. I see smoke coming from the thick hoses towards the rear of the intake and close to the firewall. the hose clamps also look burnt and smell. There are fumes coming from the area. I have rough idle, and the rpm goes in the wrong direction when i rev the car. The exhaust has sputtering sound. Does this sound like vacuum leak ?
Your awesome!!!
Very good video
Thanks Kev!
Brilliant!
Were you running extremely lean at that condition? And what kind of codes you got as a result
Let me know please
God tip. Another way is using starter fluid. Just spray it over hoses, manifold, injection valves etc when the engine is running at idle. A vacuum leak will increase the idle speed when sprayed.
Yes, just like using the propane torch. Thanks for watching!
Hi. Just wondering what size tube do u use?
Whatever size fits over a small funnel
Thanks 👍
You're welcome Audrey! Be sure to share. Thanks
Have an important question that is directly related to this video.. my question is did this vacuum leak which was on this engine did it happen to set any trouble codes or warning lights??????
I don't think any codes were triggered.
@@electronicsNmore I ask because I believe I have a vacuum leak that isn't triggering any trouble codes but it's still compromising engine performance as well as breaking. If you don't mind me sharing, I first noticed something when my brake pedal no longer retracts back to full upwards position. And the engine doesn't start in the cold very easily.. have a fluctuating idle.. it just seems as life I'm not getting enough vacuum to operate the brakes properly. Because all of the brakes grab. As if it's not releasing. Because there's not enough vacuum. But that would seem like it need to be an awfully huge vacuum leak to ruin engine performance so badly as well as breaking constantly on its own. But I can't find the damn vacuum leak? My brother believed it was the idle air control valve and I didn't believe his diagnosis fully, because I think it was a little bit of both. A worn I don't air control valve or dirty pintle and seat.. or it was just going bad.. but we replaced it and it only helped in the way that it stays running a little bit better. It feels like there's some sort of vacuum gate that is not closing and even opening at random causing the engines idle to fluctuate and compromising breaking as well. Phew... Uhhg. I said a mouthful lol sorry
if it is a diesel, you will notice increase in idle rpm for a moment. that is becasue of diesel speed adjusted by fuel rate not air; in contrast of gasoline engines.
love it
I drench the thing with brake parts cleaner, but yeah fire can happen
Ive always sprayed carb cleaner around to find vacuum leaks. When the carb cleaner hits a leak, engine rpm increases. The problem is that doesn't work with todays engines. The computers will keep the rpms steady even when spraying directly into the intake. 😔
Where do you buy this ?
Any hardware store.
@@electronicsNmore oh …like Ace hardware or Home Depot ?
What sound exactly am I looking for ? A hissing sound ? When using this
damn it works....
Where can I find a new alternator for my car I try every auto parts store they discontinued
Did that vacuum leak trigger a engine code?
They usually dont, check engine lights come on when something running more that 25% malfunctioning.
Cool
Thanks for watching Mikey!
a Car Engine Stethiscope!! 😁👍
What is he saying to do with the tunnel? Cover up the air type? Cover up the air intake?
The only problem with this idea is that the sound is high-frequency and us older folks can't hear that kind of sound.
I understand your point, especially since I have a friend that's an audiologist, but you'd be surprised how loud leaks will sound with that funnel tight against your ear.
Could you use a smoke machine?
Of course, but if you have good hearing, you'll find the leak with ease using what I show. Why spend money on a smoke machine?
Sadly did not work on 5.7L V8 challenger
We need to make a smoke generator !
And feed it to the collector under low pressure.
You can even just make a cigarette out of it )))
You will see where the smoke is leaking from
Sure...if it’s a gross leak😂
Otherwise a smoke machine is THE best tool😎
I can assure you it works on big and small leaks. All you have to do if move the tip around suspected areas. Smoke method does work good, as long as you don't have a cooling fan blowing the smoke all around. :-) A minute vacuum leak on your car won't even be noticeable.
How much is the cheapest smoke machine?
KIA SEDONA 2004 3.5L
If your car has over 60-80 K miles , you need new hoses PERIOD 😂
Plastic intake covers on many modern vehicles naturally make a hissing noise, so this would not be a very good method. Also, some vacuum leaks don't rear their ugly heads until the vehicle is under heavy load, so this method would only be good at detecting the type of leak that would affect the engine performance at idle.
so the hissing/whooshing coming from my intake manifold is normal?
I use a can of injector cleaner
That works too. :-)
your car is a Nissan maxima
No
@@electronicsNmore ok nice video. got a Nissan maxima 95
Sir get rid of your potatoe phone and get one with better sound quality! 🥴🥴🥴
half mill subscribers. 3k view....
That's wonderful YT for ya! They only notify a small number of my subs when I upload videos, and after they're uploaded, they get buried down the search results. Inferior videos get more views.
that's awfully cheap at 2.00. i don't believe it.
Oh sure...with a running engine? Come on man!
Ok, it's a hoax video.......Move on. LOL