JDM Wheel Restoration
ฝัง
- เผยแพร่เมื่อ 17 มิ.ย. 2018
- In this episode Marty buys some 2nd hand wheels off the internet and soon realises they are rubbish. With the help of the guys at Barrel Bros we restore the wheels to their former glory ready to be bolted onto the mad Mira.
Big thanks to Barrel Bros: www.barrel-bros.com
BB on FB: / barrelbros
Service Pack: mightycarmods.com/products/se...
Shop: www.mightycarmods.com/collecti...
Facebook: / mightycarmods
Forum: forums.mightycarmods.com
Also something to note around Mighty Car Mods: we are normal guys and are not trained mechanics. We like to make interesting car mods and show you how we've gone about it, but we can't promise that anything we show you will work for your particular car, or that you won't harm yourself, someone else, your car or your warranty doing it. Please be safe, be responsible and unless you know what you're doing, do not fool around with very serious machinery just because you've seen us make it look so easy. Especially polishers, they are the worst. Talk to a qualified mechanic if you are in any doubt. - ยานยนต์และพาหนะ
Barrel brothers guy is amazing on camera. Natural, to the point and funny! He could be a youtuber/ show host easily.
driving 4 answers are you looking for some jdm wheels for your mr2 ?
driving 4 answers needs a handle, wow premature didnt see the starwars refeeence - Rim Vader.
Yeah how good was he, a natural and funny! This was an awesome video guys, really enjoyed this one!
I have found some wheels! They are not JDM, but they are really cool and period correct. There will be a video on them really soon.
I see a potential spin off!
that guy needs his own show.......... I would watch no problems,
leon ham i agree. The dude is hilarious
Wheely knows his stuff.
he's like Marty in 20 years
To everyone who doesn't wear a face shield during grinder/buffer operations:
That bite at 21:36 ? Yeah, no face shield on, and he would have lost about four or five teeth, and likely stitches at the minimum, if not a fractured jaw. Marty was lucky there, because he had his proper PPE. That 12 dollar plastic sheet saved him what would have been around a thousand in the States.
i want to give you a thumbs up, but you're at 69. so i'm just going to say i gave you a thumbs (Y)
So if you know who Marcus Parks is, he got VERY lucky, no mask and the grinder caught his lip
And Marty is wearing a watch which could get caught in a bunch of places in the machinery. I love these guys, but too much stuff in this video is just bloody irresponsible. Sends the wrong message.
A thousand in the states? What healthcare do you have and how do you sign up for it? I'd expect it to be way more than that given our BS healthcare system! A thousand barely gets you in the door!
@@quillmaurer6563 ask for an itemized bill
The pointing finger prop was priceless
I think it was a nod to Japanese car shows.
the guys from the Barrel Bros are awesome!
A G yeah yeah!
Jan Babiuch-Hall lol
Marty: so this is a wheel...?
Eliot: yeah yeah yeah yeah yeah....yeah
It's like those ridiculous court transcripts. Some things just look so ridiculous written down even though in person it's totally natural.
Yeah, yeah. Yeah.
Ye ye yeah, yeah
Yeah Nah nah nah yeah yea mate yeah its a wheel
You know you're in Australia when every 'yeah' has a different meaning.
omg when that finger showed up LMAO
I thought it was a post production edit
Had a wheelgasm as soon as I saw their inventory.
eyyy my man, you gonna do a wheel mod now?
I feature a prominent wheel mod in most of my videos tbf
Figureight I didn't know you watched MCM.
Fancy meeting you here! Kinda cool tbh.
Figureight Figure8 waddup m8
Barrel Bros need a channel. I would definitely watch them
That pointing finger tho 😂
Chris Ortega remind me of the old Best Motoring videos
Reminded me of Colin Furze's pointy hand thingy. Or the same thing Bad Obsession Motorsport does
Chris Ortega 🤣I thought it was just me
It's from Monty Python. i.imgur.com/Vn4aXla.png
Not to point fingers....
This was a much better video than i thought it would be.
You guys have matured this channel into something seriously special.
“Yeah, yeah” -Bearded guy
Add a couple more "yeah's" and we might be in the ballpark.
Mark is hilarious
Oi!
Andrew Peachy what
Yeah yeah..... yeah yeah.......ye..... yeah yeah.
7:21
That Oi! 😂😂
40 Minute video? Yesssssssssssssssssssssssss! Thank you!
Wayne I didn’t even realize the video was dat long and I’m just finished watching it 😂😂
same haha
i didnt even realize its 40 min long!
I think it's really cool that they were willing to film the process of restoring the wheels themselves. Made for a great video!! Keep it up MCM. We love you guys!
gold centers are timeless, they match everything
Totally agree. I have gold-center wheels on my VW Bug, they needed a full sandblast/repaint, debated going a different color. Polished silver? Match the body color? Contemplated all these options but decided I couldn't go wrong going back to gold.
Idk why but I want to see Mark (the Barrel Bros. Owner) take over the MCM channel for a day and see how it turns out. I would watch it xD
So would I, great content :D
I'd watch the hell outta that episode
He pretty much did, those first 20 minutes were more than a day of work
@20:00 Marty - lose the fabric gloves around extremely powerful, high speed spinning machinery, that's a MAJOR safety no no. I know they're part of the brand, but the thin latex/neoprene gloves the shop guy was wearing will tear right off your hand, but the fabric ones will suck your arm(and the rest of your body) in should that lathe grab it.
But, that out of the way, AWESOME piece! Great insight into a local business of CRAFTSMEN.
RyTrapp0 to right mate i remember my introduction to power tools and equipment at tafe and they show picture of what happens when you dont wear proper ppe
also the way he looks away from his hands when he talked ,i was taught to either talk while still looking at what my hands were doing,or preferably to take my hands away from the work and then talk
That has happened to me with similar gloves on. The gloves just ripped off of my hand
+
RyTrapp0 also no watches
This type of episode is what makes MCM the best car show on TH-cam! All the different things the random outsiders bring to the show (and usually become part of the show) is just unique af and sets MCM apart from the other Tubers working on cars! Keep kicking ass guys.
Shout to elliot .... what a worker a real craftsman....
Spyzola yeah! Yeah-yeah-yeah! Yeah!
yea yea yea
yeah yeah yeah yeah yeah
this wheel guy is funny as i love it when they dont mind showing off the process
In this video Marty demonstrates the importance of PPE by getting smacked in the face by a wheel.
Michael Gallagher But did he lose an eye? Nope. So the glasses worked!
Pro tip: Dont take a drink everytime Eliot says yeah😂
Dahlmasen lmao you start playing and 5 mins later youre out cold on the floor XD
J Blob LOL!😂😂
The pointer finger is a nice touch.
This is the part where the tyre guy goes and scratches it to shit...
ThatGuyNamedScott. C my brother got style 5 BBS WHEELS FOR HIS E28 BMW. Took him hours to get rid of the black powder coat on the lip and to polish the lips and paint the face. Then all that work for the tire guy to scratch the lip and chip paint on the face when tightening the wheels
Art Vandelay also use a socket so big that it scratches all the paint around the lug nuts..
Got new wheels yesterday and they murdered my black rims to primer now i need to fix them...
Yup. Granted I did paint mine with a rattlecan, but still. Only a tiny chip on the paint from the machine when I got new tires for the second time. Damn shame of you ask me since they're a rare version of sort-of common wheels, (OEM E36 M3 double-spokes, staggered, with "BMW MOTORSPORT" stamping, only available in that exact config in 1994-1995, later ones have no stamping) but my paintjob wasn't 100% anyway.
Mounting tires is the one time that you lose control over your car, almost everything else can be done yourself. I've watched videos and it *is* possible to mount tires yourself without a machine, and even balance them to some extent. It's extremely difficult though, you need large levers and a lot of weight and strength. It's just like how you do a bike tire but so much harder. And on big lo pro wheels I don't even know if it's possible by hand with levers.
That bridgeport sounds so much nicer than AvE's haha
He self proclaims that its "clapped out"
Ave also has a loud vfd attached to his that this won't have
Came here to say this!
Lord Grease Earl of Maggot yeah, I just didnt realise how clapped out haha, sounds loose in comparison haha
Thank you for the lesson in offset! Love how the videos can be instructional, but still interesting. Keep it up because these vids are MAAAAAAAAAAD
Trader Joe wow... you know, there is this awesome thing called google.
Yo i just enjoy watching them and how informative their videos, I don't know why you have to hate
“Why do you bring me junk martin?” I lost it laughing 😂
I liked the video before watching it.
Sourabh Sharma "I'm a sheep, guy's look at me"- You
Same
thanks!
Sourabh Sharma i always do
I always do that when a certain channel always makes good videos
He doesnt even know he's hilarious with his pointer haha
how many times were "yeah" said in this video?
Olav Nyheim too many
How many times was***
yeah nah yeah
zzx probably, who cares about was/were, i feel it looks less retarded than there/their/they're.
Some say Usher is still jealous till today..
This video not only had great content, but the guys at Barrel Bros seemed really genuine, and great dudes! Super natural and down to Earth. Really nice to see!
Its 3am, time to sleep. *mighty car mods pops up on feed* YEET MAYBE NOT.
same lol
YEET!
we usually upload in our afternoon, soz!
Feeling this. Ah well, I've got 6.5 hrs to sleep....
Mighty Car Mods just remind them the earth is round , and if we in Australia get all there alerts at 1 to 3 am too
Pépite is french for nugget
"Pépite d'or" is the word for gold nuggets. Or for other small bits of things, like "pépites de chocolat" for "chocolate chips". For chicken nuggets we say "Nuggets de poulet".
For cars which doesn't work properly we have some funky words like "chignole", "bouzin", "charette" but "merguez" is probably the most appropriate ;)
You're a Pépite
its not nuggets de poulet its croquette de poulet eh
also here in french part of canada a cheap old car is called also a taco or bazou
Yeap Croquette is even better ;)
We know you are a bit touchy with english-french crossovers over there :D
That it's one of the most interesting videos I've seen in a long time. It really shows you how much goes in to restoring a set of wheels. You start to appreciate and understand the pricing that goes in to that much craftsmanship.
Barrel Bros a complete natural on cam, sooo easy to watch and very enjoyable. Thanks
* Getting ready for work *
* Notification comes up. *
"38 min video. Has to go to work in 40 min. Thanks, Jesus. " :D
This is one of the best videos you have done in years. Great work guys.
That was a really great video! Not too fast paced and the quirky owner of Barrel Bros was funny too! Nice to see/hear just general conversation regarding a quite specialised topic, it really makes learning/watching very relatable. Nice one guys!
The Mira is my favorite project on the channel. So incredibly unique; this channel is the best place for car content!
Mark was born for TH-cam car vids. Thumbs up to mark 👍
James Bond effect is fender flares.
thank you sir, you are truly doing gods work
Deadset legend. Thank you Sir.
I remember now. I was trying to figure out what it was. Them LED fenders were a work of art.
Good man, i repeat... good man
Thanks, all I could think of when they said James Bond is the old Marty appreciation thread of him being photo shopped on to James bond’s body
Big love for the Bridgeport #AvE
Alex Bennett I immediately thought the same thing
ol clapped out bridgeport
Same.
love your content !!
Need to have the older guy on more. He was awesome.
I dread to think how much that work would cost. What an awesome job though.
World of Randometry ha, 5-7x the value of the wheels!!!
Every hour of labor is probably worth the whole wheel
To buy a set identical to that from Barrel Bros is ~$2000AUD give or take a few hundred to give you an idea. Refurbished but not widened are significantly cheaper than that. Check out their FB page where they post their stock and prices.
Most likely nothing ... they showed their shop, talked to the people, most likely a sponsor episode thing.
Dethecus0 2k seems a decent deal to create your ideal wheel. I don't think I'd spend 2k on wheels for the mira, but non the less I thought they would be about twice that.
19:00 That polishing on the lathe makes me nervous. Seems like the the teeth on that chuck could catch a finger if you aren't being super careful.
Jase Poag Its spinning fast enough they kick your finger out more than grab it it. Does hurt a bit and get your attention though.
I suppose so. I can't imagine that passing any kind of work safety standards though.
Jase Poag not with gloves on
Gloves aren't going to prevent a finger from getting pulled in an mangled. Hell, loose fitting gloves might make it MORE likely to get pulled in.
Jase Poag thats what i Was getting at. "i cant See that passing any Kind of safety guidelines"
"Well certainly not if you have gloves on"
My wording was kinda off...
I love watching and listening to guys like this. Super knowledgeable, super friendly and explain things really well so it's easy for mongs like me to understand.
Why did you bring me Junk Martin ! - lol - wouldn't be MCM if it was schmick !
This guy reminds me of my Dentist. Really enthusiastic and really sad about being brought stuff in bad condition.
It's because he genuinely cares so much about wheels, makes him sad to see them in poor condition.
This format of making a long video of a whole process is much better than lots of parts where not all that much happens
Mates I can hardly believe I've been watching you for nine years! almost a full decade! I found you when you posted the MCM Drift video at Oran park!
Love the longer episodes. Cheers gents.
I love the mira build its been a long road but worth the wait
Amazing video guys, always have wondered how dope JDM wheels come out so clean and the work that goes into them. A new appreciation for Barrel Brothers and others who restore wheels! :)
"PPE's are often overlooked because they take time to put on, but can save you from a trip to the hospital"
Meanwhile, on Roadkill...
Expert commercial placement... Marty gets whacked with a rim and BOOM commercial.
what commercial? :P
@@Mr_jz_12 true, if he was running an adblocker his face would have been fine.
love the Monty Python style pointer
ha! someone else made the connection.
Ecosse57 "Ni"
"In order to pass through these woods... You must find... A SHRUBBERRY!"
Adam Davis and another Shrubbery !
so who's bring the Herring to cut down the tree
You guys found a legendary wheel place. Need more of these guys more often.
That was one of the BEST Episodes in awhile, Really enjoyed the indepth look into the process, and Ol'Mate at the wheel shop was pretty funny too.. Nice work.
What a legend wheel guy Mark is!
Wheely good episode lads
I guess everybody just rolled on with your joke
@@jizzyg1559 Just tyred of bad wordplay.
Amazing video! Very well executed, educational, interesting, informative and the Barrel Brothers are awesome, you should have them on your channel as often as possible, they make for a great team with you guys!
Super informative and entertaining. One of my favorite videos of yours in a while. Keep them coming!
The wheel guy is cool and funny man.
Finally some Mira content, ayy.
I thoroughly enjoyed seeing the wheel guys do their thing. I know you guys send your stuff off often, it would be nice to get some more behind the scenes stuff when you are having custom stuff done up when possible.
My daughter got me the book for Fathers Day. Autographed and with some stickers thrown in. Top gift of all time.
Bridgeport milling machine! Ave shoutout!
eyyy jamesbondaffect aka fender flares
The potato Party pooper shh
Duuude old school viewers only
back before people "Stanced" to get past overhang laws! Flares>stance anyday classicthrottleshop.com/wp-content/uploads/2017/09/1974-Holden-Torana-SLR5000-6.jpg
they better be rgb
Can I just say one thing I think we all take for granted is the epic soundtrack that the boys create that always compliments the pace of the episode. Makes me wanna double drop a coupla white Mitsubishi's.
Moog, I have to say that the music is getting better and better every season, this Jazzy-Chillout in this video is great!!!
*For some reason I wanna import a Mira now*
P. Cookie good luck..
If no luck. Look up a Ford Japan Festiva GTX.
im just getting an L200 Cuore for a few hundred
For some reason, I wanna get some junky old alloy wheels rebuilt!
25 year law here in the US. i could import a mira with zero legal hiccups. just imagine, if staya didnt have the laws they do, we wouldnt have all the mira episodes theyve put out up to this point. it would just be like "we imported our awd turbo mira, lets do some mods!
Bean Shooter *Yeah man I'm in the US too, Boston Ma to be exact lol. Potholes and a Mira may not be the greatest idea though 😂*
imagine curbing them right after all that work. Id be paranoid the whole time driving that car with such nice wheels
Such an amazing video! never seen the entire process done with the tire, the guys at Barrel Bros seem to have a great work ethic!
Superb to watch the guys at Barrel Brothers! Great episode!
makes you think why some rims are more expensive then others, its because people like these guys at Barrel Bros customizes them to fit perfectly, even better from factory probably. and that is why ill probably never afford them. can always dream though! xD
Yes but you *can* afford a bench grinder with a polishing wheel, and it's the long tedious hours of polishing that is the most expensive part so you can do that yourself and save a ton of money. Makes me want to get one now. I should have got that one in the classifieds a few weeks back for cheap but I didn't have a need at the time.
Never use a lathe with gloves. That's how you lose fingers.
Funny, passionate about his work and informative. Your wheel guy is a legend.
Awesome video! Love the level of detail he goes into with each step. Cheers!
The most amounts of yeah yeah yeah I've ever heard
XD hahaha i was going to say something about that good thing I wasn't the only one that noticed
It's perfect Australian English for me, there's a fine nuance to each Yeah which translates what he's thinking well.
Efrain Bueso yeah
That moment when you were gonna go to sleep then mcm drops a vid
I've honestly never considered wheel repair shops before in this detail. Thank you! Great episode
Enjoyed the video guys . ive watched all your channel.. im an aussie living in usa so its nice to watch you guys
I considered watching this at work but figured I'd get in trouble, so I left early instead.
Jimmie Russells that's awesome haha 😂
My favourite Ausises
Will you ever twin turbo the Barra and stroke it to 4.2l and call it the "420 Cressy"?
Twin turbo is not necessarily better than single turbo.
Jorn Navarre a single turbo also delivers a more linear power curve, since there is no interruption from a different turbo. A Stock R34 Skyline has parallel twin turbos, rx7 and supra have sequential twins, but those are stock, most of them upgrade those to a big single turbo, for lots of different reasons like maintenance, cost, drivability etc, besides, a twin turbo setup is often heavier and more complex, besides it creates more heat, there is less room for bigger turbos which Essentially means less power
True but you can do a compound setup, you can also spray the F out of it and make a ton of power, either option works. But the problem is neither Marty or Moog can drive the car as it currently setup to it's full potential so they need to work on that first. Making power today is easy...
Jemarc Quash Boxhill single turbo is better and the higher hp motors are usually de stroked to a 3.8 for higher revs
Crowy The butcher destroke means less torque tho
You can have a car that revs to 10k, but what's the point of it when it has the same Power as a Civic when it reaches 10k
You need to utilize the powerband dude, shift at the right point so that your car has the most torque available when you shift
Those guys take extreme pride in their work and it shows nicely in the final product.
The Guy from Barrel Brothers is awesome I think he may have missed his calling. I am really glad to see MCM put people on the show like this, Because so many shows do not give the time of day to the people that do a lot of the work in the back ground. Good on you MCM.
What size are the tires and brand ? Wheels looking great can’t wait get some for my Rx7.
Zepol Workz hey bro, what wheels are these? I don’t think they mention it in the video and I’d love some for my mk1 mx5
about_69_gingers I think they are SSR ?
Nugget = Pépite.
Also, me telling you this is me giving you a "pépite de sagesse". (Nugget of wisdom)
Absolutely amazing video this week can never go wrong with og JDM Wheels
awesome vid guys - so many car vids simply tell you that wheels are being re-furbed... so nice to see the process
James Bond effect means it's getting MAAD overfenders, this will be mint.
Scott Mahoney thaaaaanks
Will it have led's for extra James bond effect?
Keep doing episodes like this regularly. As much as i love all the builds you do i like seeing smaller projects too. Keep being mad
Elliot is a true artist. His attention to detail seriously is intriguing.
The James Bond effect is BAAAAAAAAAAAA-Aaaaaaaack!
Talking about safety and then shows them using gloves at a lathe. Thats some real comedy.
I love this guy! please bring him back often!!!
one of the best main channel vids in ages