Thanks so much! Just some FYI, you can take the blower motor out without removing that stubborn screw in the back left of the plastic panel. I had 2 small leaves in the motor causing it to make a loud noise after I had changed the cabin air filter. So, when you change the cabin air filter be sure nothing falls into the motor; which is not easy to see into or feel, unless you have small hands or camera to see into the motor from the filter location.
Thank you for this video!! My blower was making an awful racket. It was a wrestling match getting the blower out. Lo and behold, I take it out and there is a partial acorn that was rattling around the fan 🦫🤣. Problem solved!
I have that same problem. Trying to find the blower resistor on my 2016 Chevy Tahoe LTZ. Did you find anything out? I read on a form there is no blower resistor for this model but yet I see them selling front blower resistor for that model. I even bought one and cant find were to put it. If you find out anything let me know. Thanks
Hello 👋🏻 if you have a second my ac works mostly on high very good but when I put it like mid way high it suddenly stops blowing and makes a loud blowing noise would you say this is the problem
√ *Watch the Video*
√ *Buy The Part at 1A Auto* 1aau.to/m/Shop-TRQ-Parts
√ *Do it Yourself*
√ *Save Money*
Great video. No nonsense, straight to the point. You made taking the connector off look much easier than what I experienced.
Thanks so much! Just some FYI, you can take the blower motor out without removing that stubborn screw in the back left of the plastic panel. I had 2 small leaves in the motor causing it to make a loud noise after I had changed the cabin air filter. So, when you change the cabin air filter be sure nothing falls into the motor; which is not easy to see into or feel, unless you have small hands or camera to see into the motor from the filter location.
I am looking for the blower resistor location on a 2015 Yukon slt
Any idea where the blower motor resistor is located on a 2019?
Thank you for this video!! My blower was making an awful racket. It was a wrestling match getting the blower out. Lo and behold, I take it out and there is a partial acorn that was rattling around the fan 🦫🤣. Problem solved!
Thanks 🙏, the last screws never come back!🤣
Used this video today to fix my issue! Thank you!
Thanks for the video, saved me a lot of grief. Much appreciated!
Do you know where’s the resistor is located?
What is the attachment called for your battery operated impact?
Is the receptorin in the blower motor? Great vdeo
I have that same problem. Trying to find the blower resistor on my 2016 Chevy Tahoe LTZ. Did you find anything out? I read on a form there is no blower resistor for this model but yet I see them selling front blower resistor for that model. I even bought one and cant find were to put it. If you find out anything let me know. Thanks
Hello 👋🏻 if you have a second my ac works mostly on high very good but when I put it like mid way high it suddenly stops blowing and makes a loud blowing noise would you say this is the problem
It's the u joint.
Very good video!!! Kudos!!😊
What is the right-angle tool you're using on your driver?
The resistor is built into the blower motor on this model. At least that was the case for my 2018 Silverado.
resistor location 2014 Silverado? please.
Where is the fan resistor on this model? I can't find it on any videos.
Ha that’s simpler than I thought , thanks you
Would this fix the buzzing noise that comes from down there ? Usually when truck is off or on
Replaced mine today and it worked. Started my vehicle later and it does not work at all. Any ideas?
Is there from 1500 to a 2500 gmc 2016
we did everything you did, but it well not come out .something is holding it.