Dear Sir, I'm not in the habit of commenting on TH-cam. In fact this may be my first. I just wanted to say that your channel is far and away the best, most informative and helpful sim racing channel for gadget geeks such as myself. Thank you
@@nonami_066xswqoqowiwl And here we have the quintessential welcome to TH-cam. 👏🤦♂️🙄 @Patrick A. Take no offense, they mean well. Unfortunately they lack the ability to express themselves as one would expect from a decent human being, or it's a sad attempt at humour.
Some additional tips to anyone looking to assemble their Fanatec Porsche 911 GT3 R Podium wheel kit. Some things to do different from this video: 1) The small paddles should be attached the opposite way to shown in this video so they sit farther from the rim. 2) You should use the spacers to bring the large paddles closer to the wheel rim. This way the paddles are easier to reach and it is easier to manipulate the different paddles as they are offset distance wise from the rim. 3) When attaching paddle wires to the hub, use the cut out holes on the top, not on the sides. It will be a much cleaner look wires-wise. Also, FYI: I just received two sets of the Advance Paddle module and the carbon is now 3 mm thick.
You're so very good and thorough at doing these videos. Thank you very much - I've just ordered this wheel and I'll be re-watching it when I get it in my hands - cheers again Barry 👍
Yet still reasonable priced unit if you try to put together similar performance any other method. Easily end up paying for MOMOs FIA licence or end up with 3d printed stuff.
I have the podium shifter kit on my F1 rim and the paddles are solid. I've never had an issue with mine in over a year of heavy use, despite them being thin. Because of the magnetic actuators and short throw you don't put the kind of lever force on them that would weaken them. The original shifters were much easier to yank on too hard and on my original Formula Carbon rim I have absolutely bent the metal shifting plates on accident.
Barry, you forgot to use the spacers on the APM Paddles for easier distinction between the upper and the Shifter Paddles. Also, the upper Paddles should be mounted from the back, not from the front (which already gives a slight gap for distinction between the Paddles so you don't accidentally push the wrong Paddle, especially when driving in VR and with Gloves). The cables of the APM should be as deep in the Podium Hub as possible, it's fitting well so no reason to not push the cable all the way in, looks much better and it doesn't popping out ;)
Spacers were not used because I did not want the paddle reach staggered. Muscle memory works well enough for me. But yes that is an option. Stuffing the thick cables against the PCB to take up the slack certainly is an option. But I would rather not take a chance of any cable rubbing on the PCB. The way the BME covers that part of the APM and captures the cables will keep them in place quite nicely.
Agree with the small upper paddles. I've mounted them from the back to get a little extra gap to the GT paddles. And i think it's the way it meant to be mounted. Upper paddles from the back, GT paddles from the front.
I would like for paddles to be 1mm thicker and smaller paddles somehow easier to reach. I don't know why, but this replica doesn't have quality and durability written on it on the first sight. I don't like Fanatec their brand name everywhere possible and their support isn't something to write home about. ... Still searching for a new wheel... I'm heavily leaning towards Ascher F64-USB button box and some quality 300mm rim...
My DD1 setup with this wheel came earlier this week. Thanks so much for the education - not only about the wheel and its assembly, but the mechanical expertise that you have.
@Sim Racing Stewart via iRacing Simulation if you can afford it, DO IT. not sure i'm any faster, but the immersion is unparalleled. i will say some sims are easier to configure than others.
Thanks Barry! I really enjoyed watching this one. As you said I ordered just the wheel rim, but the leather one so I don't need gloves. That Porsche logo makes it so beautiful. Looking forward to mounting it to my base. Cheers from Belgium!
Since the rim as a “stand alone” product gets a recommendation it would have been interesting to see how an Ascher button box worked with it. The competing teams right now when it comes to new higher-end gear seems to be Fanatec DD vs Simucube 2. So this rim with a SC2 compatible button box like the wireless one from Ascher could be a very interesting product for many!? Thanks for another great video from the SRG!
Hi Barry, I remeber in your DD2 review you mentioned that the fanatec quick release system is never a tight fit, that the wheel wobbles a little bit when attached to the motor. Is it the case here with the podium hub? Thank you very much!
Quick question... 14:45 On the front of the carbon fiber face plate, the yellow, green, and red bits; Is that a sticker that can be easily removed? Honestly it's the only thing I don't like about this wheel. Thanks as always for the awesome reviews!
Great review as always but im seeing on Fanatec Forum lots of complaints regards the Beta drivers 352 and 356 to enable use of the PBM . What driver were u using and have you had any issues ?
I just wanted to inform you on your pedal shifter the smaller one is screwed from the back side also they say for a larger wheel you want to use the spacers that's why you're having problems reaching for them. Just a heads up and thanks for the video. You do awesome work!👍🏻
I just got the podium hub and it has a lot of play. So I tried to use the bolt but it's not long enough to reach the threads in the hub shaft. I never had to use the bolt with any of my other wheel rims.
Question… Instead of using the Fanatec Porsche 911 GTR3 wheel rim, can you attach the Podium Module and Paddle Shifters to a Momo 88 or Momo Montecarlo Alcantara wheel rim? Thank you.
great review - do you think the Porsche rim would fit the cube controls button plate - i have the new cube controls GT OMP Pro and i am looking for a leather Wheel ...
I love this kit but I would really like a rim like the Mclaren GT3 wheel and I can't find one anywhere. The closest I've seen is the Turn U shape rim. Great video as always, thanks ✌️ 😎
Barry. Do you think you could get your hands on a Simetik k2 Cockpit. They are made in Portugal. Ive heard only good things about them. Looking at possible ordering one myself. Would like to see a really good in depth review from you . Would really help in my purchase decision. Also keep up the Great work, your reviews are amazing.
Can you try multiple different wheels on this button box? I'm very interested in just the button module but I'm afraid my wheel's spokes may be too large and contact the buttons on the bottom right and left. I'm interested in a thicker spoked 300+mm wheel and the Turn R20 wheel rim
Barry, I was wondering if this button box works at all with the csl elite wheel base. Website says no, but wondering if any of the functions work, buttons etc.
You got me thinking Barry, what rim sizes would be perfect to cover all bases? I currently have a momo 350mm deep dish for nascar, drifting and regular road cars, 320mm for performance street and exotics. Completing my ‘end game’ set with a formula rim, is 250mm to small or would a 270mm be a better compromise? 🤔🤔🤔
Thanks @Barry! Ordered mine today along with a DD2, now all I need is my P1X to hurry up and I will be in a good spot. Rig upgrade in progress lol. Moving from an Obutto Revolution and a T500rs with T3pa's. Next up pedals and I think I may go with the Simworx Pro GT3's based on your review. Recommend anything better? Best to you mate, all these companies have your reviews to thank for my purchases. I told the Sim-Lab guys that when I ordered.
@@Bob-Jenkins Yeah I hear you mate, I have looked at those myself living here in the USA and they still come in at about 1.8k and that's just on the exchange rate. I do hope Barry see's this post as my question is running out of time. I need to understand Barry's recommendations for a set of pedals in the 1 - 2k mark. @Simracinggarage
@@Bob-Jenkins Thank my friend. Had the same rig for five years. This is the start of the build for my motion rig hence the DD2, the P1X and all the rest of it. I do hope Barry can add some color here. Which Fanatec's do you have Bob? and most importantly how is the brake pedal?
@@basementracer I have the V3's sadly not the inverted version. I've spent a lot of time getting the correct feel - for me - by using the various polyurethane inserts. All my kit is Fanatec which is why I've stuck with their handbrake and H-pattern shifter, I like the simplicity of everything plugging into the DD1. On the very rare occasion it gets plugged into a console, so there's another reason. Now, if I was in your position I'd be going all out. Yes Fanatec's pedals are fine and I've them as close to one of my IRL vehicles as possible, but looking at Barry's setup there are so many choices and if I had the money I'd be grabbing those sexy Wave Italy Imola's. I mean for a motion rig you've got to get the best. Like I said, Fanatec's are perfectly fine, but honestly I think there are many better. I wish I could be of more help. Does Barry use Twitter, that may be a way of getting a quicker response?
I just got the podium hub for my dd1 and it has a lot of play so I went to use the bolt to tighten it up and it doesn't reach the threads in the base shaft. I never had to use the bolt before wtih any of my other rims.
I had the Same problem...just pur the quickrelease on till it doesent go any farer in there then let the quick release snap and push the wheel without holding the qr back you will hear a little Click...then tighten the ring and the Screw should go in
Holy crap what it that sim rig though... must have been insanely expensive, right? Plus really curious what kind of power it draws... must have a significant effect on your power bills if used regularly, surely?
Barry, I have figured something out that is a huge problem with this wheel and many other Fanatec wheels. The wheels just stop working during a race or practice. I have the exact wheel combo in this video. My stuff is brand new and only two weeks old. During multiple races it would just stop working. It still had power but nothing worked. I added dialectic grease to the pins and all connectors and haven’t had the problem since doing that. I think this is something you should look into on your show as this is a BIG problem for many Fanatec owners. It’s a very cheap and simple fix. For one, why is it happening and two why did dielectric grease fix it?! Check it out. Thanks
I really wonder when they'll add support so the podium endurance module compatibility to the clubsport wheel base? I know they stated it was coming but haven't seen anything else about it. I just got my first full clubsport fanatec setup but I accidentally ordered the podium wheel instead of the clubsport one and they don't sell the module separately so now I'm stuck and trying to figure out what my best options are, really a shame I spent all the cash and a simple error has completely sidelined me. Would love to hear what fellow fanatec people have for suggestions. Would they maybe swap it out? I'd be fine paying a restocking fee or something.
The wheel as a whole package is gorgeous as hell, there's no denying. Aesthetically especially, Porsche fanboy here! But i'm not a huge fan of the Fanatec quick release system and what i've seen in various reviews of the podium DD system, the amount of play and wobble in the connection is worrying. I wish someone would make an adapter to have this wheel work with a simucube 2 wirelessly, with the simucube dovetail-style mount or a Q1R . At least my simracing future for now looks like a Simucube 2 instead of a Podium DD, which is a shame, since i've drooled over this wheel since it was unveiled. And maybe someone has an adapter made or in the works, but my knowledge on these matters is still too incomplete. But all this thinking might be hoping for nothing..
Youre better off with the Simucube 2 mate. Plenty of wheel and button setups out there. I know fanatec has been hitting it hard these past 2-3 years to get that market share and theyve been releasing some great products but I think you can easily get something similar like this for your Cube. The one thing I dont like about fanatec even though I own their stuff, is the fact they nickel and dime their customers with their whole "Eco system". With the money I spent on a CSL Elite Setup I could have just got a Simucube if I was patient and pad the little bit extra. Its like buying a motorcycle, get the one with more power because if you get the slow one to learn on youll grow out of it quick and want to upgrade shortly after.
@@iamjamen I saw Barry review that on this channel too, and it seemed to eliminate alot of the wobble out of the system which seems like a very goof add-on. But it didn't seem like a "rock solid connection" even after that. Yes, i'm being really anal about it but at that price point especially, i would expect more rigidity out of a DD system. Maybe if fanatec would redesign their wheel mount system to include something like the z-ring in metal, then i would probably consider it seriously.
Amazing review, but i have one question: Can you test the compatibility with Clubsport Wheelbase v2.5, do the buttons still work and shifters? Would like to know, as always thanks for review and your work.
You can find all this information by using Google or have a look at the Webshop page. For now it is ONLY working with the Podium DD Bases. Other Bases need a firmware update to get compatibility which is coming later this year. So, no, it's not working with a CSW v2.5 atm. But, because you asked, the shifters are working because only the Button Module is not compatible yet.
@@Fanatec_is_TRASH the display will work to the full extend on the CSW v2.5 but not at the moment as described in the Webshop page because a firmware update is needed which is expected later this year.
could you drift with this wheel? how hard is it to let the wheel spin through your hands with thee D shape? Im looking for a good round wheel option for my podium dd1
Hi Barry. I hope you can answer this. I just received the kit your reviewing here. On the podium hub, i noticed one of the gold pins that connect to the motor is shorter than the rest. Is this normal??? Are you able to check on your hub if thats the case? Thank you in advanced
Hi! Is this wheel compatible only with universal hub and podium hub, or i can connect it to a thirth part hub? it s cause i have a simucube and i want this Porsche 911 gt3 cup wheel.. xd
auwoody98au go here---> forum.fanatec.com/discussion/1438/podium-button-module-endurance-software-package-incl-instructions/ Its in step 5 ---> Step 5: Install FanaLab 1.24 and enable Intelligent Telemetry Mode Go to the folder "4. FanaLab_v1-24_beta" and start the "FanaLab_v1-24_beta.msi" to install FanaLab. After the installation, close FanaLab if it's open. Open the "Enable_ITM.reg" file in the "4. FanaLab_v1-24_beta" folder and accept the messages with yes. Open FanaLab and use the button combination mentioned in the Quick Guide to switch through the ITM pages on the displays. HOPE THIS HELPS!😎👍
Hey man i have the same podium-porsche combo but i cannot get any good settings for ACC. I have terrible shaking-obscillations when going straight. Can you give me your settings? Thanks
@Sim Racing Garage hi Barry, There is a set with the same rim and podium bottom module endurance but with the universal hub. Could you please tell me if there's a benefit to get podium hub over universal hub for 100 €/$ more. I want to buy this set but can't decide between podium and universal hub. Thanks in advance.
The Universal hub comes with the standard shifters of the uni hub, so if you want better shifters a magnetic paddle upgrade will cost you 99dollar/euro making it a price of 650dollar/euro so actually if you want the podium paddles its the better deal with the podium hub because you get the podium paddles already in the deal so you save 80dollar/euro taking that one. I have heard though that the magnetic paddle shifter upgrade of 99dollar/euro is actually stiffer then the podium paddle shifter upgrade so it’s totally up to you if you want the extra paddles or not. Hope this helped you in any way and good sim racing ! ( I’m looking for the same wheel at the moment so glad to share the knowledge)
i love your info mate you have made some of my buying decision easy, i am stuck on now to factors do i get the fanatec eco system or buy the simucube dd and get v3 peddles from fanatec and then what i am confused on is there way to hook up say fatantec wheels to the simubue dd base. cheers if anyone can share some info on it
I believe you can get Fanatec wheels to work on Simucube but it needs permanent cable between the steering wheel (Clubsport or Podium hub) and the PC (And a Fanatec - Simucube adapter ofcourse). As for the Podium wheels I think a lot of the functions of the wheel will NOT work. If you like the rims go for Fanatec, that is what I did. Even though I initially was looking for Simucube. But I was also already in Fanatec ecosystem.
Explosivefibers yeah I am not in that eco system at all but I do like the v3 peddles and shifter and handbrake. But over all thoughts on dd wheels sc2 seems to be the option I might go if I end up with dd base. I am weighing it up as it’s looking more n more like arm and leg just to get what Eva setup really. That said my mind keeps telling me it’s sc2 I want.
Did you enabled the ITM for iRacing via Fanalab? Then you should see in the display the small text "ITM". Once you see that text, press the tuning menu button and turn the funky switch at the same time to scroll between the legacy mode and ITM.
Hi Barry or chat, I'm after a dd wheel for more power as I like old group c cars and basically my tsxw clips like mad so I can only run I'm guessing about 1.half nm, I know I can get a simagic for 800 pounds but do I have any other options, some input would be grateful
I suspect Porsche are very choosy with whom they do business so their endorsement of Fanatec products is an indication to me of how good they are. This is also a great in depth review which led me to buy the clubsport version of this wheel.
Their current stick shifter doubles as a rally shifter. It has a rally knob and a stick shift knob and there’s a little switch on the bottom middle of the shifter body that you just switch the to side to turn it to push/pull mode
Is he the Bob Ross of the racing sim world? Voice so smooth and clear
Dear Sir,
I'm not in the habit of commenting on TH-cam. In fact this may be my first. I just wanted to say that your channel is far and away the best, most informative and helpful sim racing channel for gadget geeks such as myself. Thank you
Nah Pussy-Bitch , you weak 😹😹
@@nonami_066xswqoqowiwl And here we have the quintessential welcome to TH-cam. 👏🤦♂️🙄
@Patrick A. Take no offense, they mean well. Unfortunately they lack the ability to express themselves as one would expect from a decent human being, or it's a sad attempt at humour.
Bob Jenkins I’m sorry I’m bipolar my guy :(
@@nonami_066xswqoqowiwl you will never be as swag as barry
@@nonami_066xswqoqowiwl we never apologize!
Roses are red
Violets are blue
You just gave this man almost a full watch hour
And I did too
Some additional tips to anyone looking to assemble their Fanatec Porsche 911 GT3 R Podium wheel kit. Some things to do different from this video: 1) The small paddles should be attached the opposite way to shown in this video so they sit farther from the rim. 2) You should use the spacers to bring the large paddles closer to the wheel rim. This way the paddles are easier to reach and it is easier to manipulate the different paddles as they are offset distance wise from the rim. 3) When attaching paddle wires to the hub, use the cut out holes on the top, not on the sides. It will be a much cleaner look wires-wise. Also, FYI: I just received two sets of the Advance Paddle module and the carbon is now 3 mm thick.
nice advises 👌
Thanks, that was the information I was searching for!
Thanks, that was the information I was searching for!
You're so very good and thorough at doing these videos. Thank you very much - I've just ordered this wheel and I'll be re-watching it when I get it in my hands - cheers again Barry 👍
You are the best Barry.
I have my Porsche Wheel since January and Im very happy with it :)
@@Nineteenfivepointfive They flex abit, but nothing to worry about.
This single wheel costs more than my entire sim rig including the seats lol
Yet still reasonable priced unit if you try to put together similar performance any other method. Easily end up paying for MOMOs FIA licence or end up with 3d printed stuff.
I have the podium shifter kit on my F1 rim and the paddles are solid. I've never had an issue with mine in over a year of heavy use, despite them being thin. Because of the magnetic actuators and short throw you don't put the kind of lever force on them that would weaken them. The original shifters were much easier to yank on too hard and on my original Formula Carbon rim I have absolutely bent the metal shifting plates on accident.
My eye is on that Prosimu rig! Part two of that review is what I'm waiting for! It looked good.
Barry, you forgot to use the spacers on the APM Paddles for easier distinction between the upper and the Shifter Paddles. Also, the upper Paddles should be mounted from the back, not from the front (which already gives a slight gap for distinction between the Paddles so you don't accidentally push the wrong Paddle, especially when driving in VR and with Gloves).
The cables of the APM should be as deep in the Podium Hub as possible, it's fitting well so no reason to not push the cable all the way in, looks much better and it doesn't popping out ;)
Spacers were not used because I did not want the paddle reach staggered. Muscle memory works well enough for me. But yes that is an option. Stuffing the thick cables against the PCB to take up the slack certainly is an option. But I would rather not take a chance of any cable rubbing on the PCB. The way the BME covers that part of the APM and captures the cables will keep them in place quite nicely.
Agree with the small upper paddles. I've mounted them from the back to get a little extra gap to the GT paddles.
And i think it's the way it meant to be mounted. Upper paddles from the back, GT paddles from the front.
ErnieGaming correct.
A quick look at the instructions would show you the cables are meant to cross over inside the hub :)
@@bertram-raven only women read instructions
Barry, use the spacers on the gear change paddles and that makes it easier to reach for the smaller paddles.
I would like for paddles to be 1mm thicker and smaller paddles somehow easier to reach. I don't know why, but this replica doesn't have quality and durability written on it on the first sight. I don't like Fanatec their brand name everywhere possible and their support isn't something to write home about. ... Still searching for a new wheel... I'm heavily leaning towards Ascher F64-USB button box and some quality 300mm rim...
IIRC when I bought the APM for my V2, this was what the instructions said for when using the GT paddles
alpha007org we’ll all brands have terrible customer support.
@@alpha007org I don't think you'll have full functionality w/ the Ascher F64-USB and the CS2.5 WB...
My DD1 setup with this wheel came earlier this week. Thanks so much for the education - not only about the wheel and its assembly, but the mechanical expertise that you have.
@Sim Racing Stewart via iRacing Simulation if you can afford it, DO IT. not sure i'm any faster, but the immersion is unparalleled. i will say some sims are easier to configure than others.
The Bob Ross of sim racing
Dream GT wheel for Fanatec. This goes to my "must buy" list. Very PRO review Barry 👍 Thank you for the B/W SRG t-shirt's, got them last wednesday 👍
Nice Hudy tools!
Thanks Barry! I really enjoyed watching this one. As you said I ordered just the wheel rim, but the leather one so I don't need gloves. That Porsche logo makes it so beautiful. Looking forward to mounting it to my base. Cheers from Belgium!
This was therapeutic, can't wait to get my own!
Thank you Barry
Since the rim as a “stand alone” product gets a recommendation it would have been interesting to see how an Ascher button box worked with it.
The competing teams right now when it comes to new higher-end gear seems to be Fanatec DD vs Simucube 2. So this rim with a SC2 compatible button box like the wireless one from Ascher could be a very interesting product for many!?
Thanks for another great video from the SRG!
I have this exact combo on order :)
I literally just built mine all up yesterday, 7yrs out the sim gaming and have returned🤪🤪
When the new direct drive base comes out I’m buying this, and lots of other stuff lol
Hi Barry, I remeber in your DD2 review you mentioned that the fanatec quick release system is never a tight fit, that the wheel wobbles a little bit when attached to the motor. Is it the case here with the podium hub? Thank you very much!
I haven't had any problems with the podium hub. Mine doesn't wobble at all.
Great review Barry, you're a pro!!!
Quick question... 14:45 On the front of the carbon fiber face plate, the yellow, green, and red bits; Is that a sticker that can be easily removed? Honestly it's the only thing I don't like about this wheel. Thanks as always for the awesome reviews!
Great review as always but im seeing on Fanatec Forum lots of complaints regards the Beta drivers 352 and 356 to enable use of the PBM . What driver were u using and have you had any issues ?
I just wanted to inform you on your pedal shifter the smaller one is screwed from the back side also they say for a larger wheel you want to use the spacers that's why you're having problems reaching for them. Just a heads up and thanks for the video. You do awesome work!👍🏻
Thanks for your review on this!
Looks like a great wheel and another awesome review by SRG. Thinking of getting one in the future when ready to upgrade to a DD1 from my CSW2.5.
@simgarage love the channel- what size m5 does the podium button module come with- the final 6 bolts that tie it all together.
Does everyone else have one eye on what’s being reviewed, with the other desperately searching to background for what’s coming next. ?
Douglas Ingram Prosimu P5MP
Would really like to know if the clearance on the button box is enough for the OMP Superquadro wheel?
nice!
what gloves do you use?
I just got the podium hub and it has a lot of play. So I tried to use the bolt but it's not long enough to reach the threads in the hub shaft. I never had to use the bolt with any of my other wheel rims.
Question… Instead of using the Fanatec Porsche 911 GTR3 wheel rim, can you attach the Podium Module and Paddle Shifters to a Momo 88 or Momo
Montecarlo Alcantara wheel rim? Thank you.
-Wow! great work man! From Brazil o/
great review - do you think the Porsche rim would fit the cube controls button plate - i have the new cube controls GT OMP Pro and i am looking for a leather Wheel ...
great job as always. Only one question, why are u using Thrustmaster shifter? Did you find it better as Fanatec SQ?
I love this kit but I would really like a rim like the Mclaren GT3 wheel and I can't find one anywhere. The closest I've seen is the Turn U shape rim. Great video as always, thanks ✌️ 😎
Have you tried the Turn racing R320 rim on this button module set up?
I would like to ask you a question, not about this video, about the 6dof sim rig, is it possible to DIY? and which is better? DIY or buy?
Barry. Do you think you could get your hands on a Simetik k2 Cockpit. They are made in Portugal. Ive heard only good things about them. Looking at possible ordering one myself.
Would like to see a really good in depth review from you . Would really help in my purchase decision. Also keep up the Great work, your reviews are amazing.
Can you try multiple different wheels on this button box? I'm very interested in just the button module but I'm afraid my wheel's spokes may be too large and contact the buttons on the bottom right and left. I'm interested in a thicker spoked 300+mm wheel and the Turn R20 wheel rim
Barry, I was wondering if this button box works at all with the csl elite wheel base. Website says no, but wondering if any of the functions work, buttons etc.
You got me thinking Barry, what rim sizes would be perfect to cover all bases? I currently have a momo 350mm deep dish for nascar, drifting and regular road cars, 320mm for performance street and exotics. Completing my ‘end game’ set with a formula rim, is 250mm to small or would a 270mm be a better compromise? 🤔🤔🤔
For me, I would not want anything less the 270mm. But rim size preference is a subjective thing.
Thanks @Barry! Ordered mine today along with a DD2, now all I need is my P1X to hurry up and I will be in a good spot. Rig upgrade in progress lol. Moving from an Obutto Revolution and a T500rs with T3pa's. Next up pedals and I think I may go with the Simworx Pro GT3's based on your review. Recommend anything better? Best to you mate, all these companies have your reviews to thank for my purchases. I told the Sim-Lab guys that when I ordered.
His "waveitaly" WAVE IMPETUS IMOLA - SIM PEDALS PRO look nice. But here in Australia they end up costing the same as the DD2 - over $2500.
@@Bob-Jenkins Yeah I hear you mate, I have looked at those myself living here in the USA and they still come in at about 1.8k and that's just on the exchange rate. I do hope Barry see's this post as my question is running out of time. I need to understand Barry's recommendations for a set of pedals in the 1 - 2k mark. @Simracinggarage
@@basementracer As an owner of Fanatec's pedals I'd say you can't go wrong with them, but there are many better. Beet of luck mate, happy simming.
@@Bob-Jenkins Thank my friend. Had the same rig for five years. This is the start of the build for my motion rig hence the DD2, the P1X and all the rest of it. I do hope Barry can add some color here. Which Fanatec's do you have Bob? and most importantly how is the brake pedal?
@@basementracer I have the V3's sadly not the inverted version. I've spent a lot of time getting the correct feel - for me - by using the various polyurethane inserts. All my kit is Fanatec which is why I've stuck with their handbrake and H-pattern shifter, I like the simplicity of everything plugging into the DD1. On the very rare occasion it gets plugged into a console, so there's another reason. Now, if I was in your position I'd be going all out. Yes Fanatec's pedals are fine and I've them as close to one of my IRL vehicles as possible, but looking at Barry's setup there are so many choices and if I had the money I'd be grabbing those sexy Wave Italy Imola's. I mean for a motion rig you've got to get the best. Like I said, Fanatec's are perfectly fine, but honestly I think there are many better. I wish I could be of more help. Does Barry use Twitter, that may be a way of getting a quicker response?
As always great review, question can I use this same configuration on my clubsport v2.5 base? Thanks
You can use is, but the Endurance module won't work. The APM modules will work fine.
@@simracinggarage3026 do you think the endurance module will ever work with clubsport?
@@graywolfoverland1377 Yes but no ETA because they first wanna fix all the bugs for the DD system with this item.
Hi all!
What is endurance mode?
I got mine and I'm loving it
Me too:) bought it for myself for christmas this year together with the Cube Controls Formula Pro. I really love this Wheel.
Brilliant ain't it
Absolutely:)
DonZ meuheu What wheel base are you using for the Cube Controls wheel?
Fanatec Podium DD Wheelbase with the Podium Hub. Works perfect;)
I just got the podium hub for my dd1 and it has a lot of play so I went to use the bolt to tighten it up and it doesn't reach the threads in the base shaft. I never had to use the bolt before wtih any of my other rims.
I had the Same problem...just pur the quickrelease on till it doesent go any farer in there then let the quick release snap and push the wheel without holding the qr back you will hear a little Click...then tighten the ring and the Screw should go in
That setup is LIT AF 🔥
Holy crap what it that sim rig though... must have been insanely expensive, right?
Plus really curious what kind of power it draws... must have a significant effect on your power bills if used regularly, surely?
If you can afford it I'm sure that you wouldn't even notice the extra electricity bill, and I've seen similar 4DoF movement set ups for about 2k.
Barry, I have figured something out that is a huge problem with this wheel and many other Fanatec wheels. The wheels just stop working during a race or practice. I have the exact wheel combo in this video. My stuff is brand new and only two weeks old. During multiple races it would just stop working. It still had power but nothing worked. I added dialectic grease to the pins and all connectors and haven’t had the problem since doing that. I think this is something you should look into on your show as this is a BIG problem for many Fanatec owners. It’s a very cheap and simple fix. For one, why is it happening and two why did dielectric grease fix it?! Check it out. Thanks
6:19 neither , its PorschE not Porsch not PorschA
Looks like the same badge they had on their original GT3Rs wheel from years ago !
Accurate.
Dear simracing god Barry, on what level is your ffb setting in fanalab with the dd1 porsche on acc?
Hi Barry, Is it possible to remove the sticker on the Podium Endurance Module? I would prefer a more clean looking of the button module.
The lines and color sections are printed, or silk screened on. So, not easily removed.
Did you do the same video but with everything going to an Xbox hub
I really wonder when they'll add support so the podium endurance module compatibility to the clubsport wheel base? I know they stated it was coming but haven't seen anything else about it. I just got my first full clubsport fanatec setup but I accidentally ordered the podium wheel instead of the clubsport one and they don't sell the module separately so now I'm stuck and trying to figure out what my best options are, really a shame I spent all the cash and a simple error has completely sidelined me. Would love to hear what fellow fanatec people have for suggestions. Would they maybe swap it out? I'd be fine paying a restocking fee or something.
Hi Sir, Your small paddle assemble wrong side, you need put to opposite side of the steel.
What sort of hex drivers are those Barry? I've been looking for a set of T-Handle hex keys, but I almost like your style better.
Hudy brand. Not cheap, but very good tools.
@@simracinggarage3026 Thanks for the response! Good tools can last a lifetime, so I bet it's worth the upfront expense.
Hi Barry,
Any chance you could see if the TurnRacing R20 fits on the Endurance Buttonbox Module? Would be much appreciated!
No chance. R20 is too small.
Barry, what gloves would you recommend?
A professional review, as always. Pay $650 for a steering wheel? Not bloody likely.
You get what you for
The wheel as a whole package is gorgeous as hell, there's no denying. Aesthetically especially, Porsche fanboy here!
But i'm not a huge fan of the Fanatec quick release system and what i've seen in various reviews of the podium DD system, the amount of play and wobble in the connection is worrying. I wish someone would make an adapter to have this wheel work with a simucube 2 wirelessly, with the simucube dovetail-style mount or a Q1R . At least my simracing future for now looks like a Simucube 2 instead of a Podium DD, which is a shame, since i've drooled over this wheel since it was unveiled.
And maybe someone has an adapter made or in the works, but my knowledge on these matters is still too incomplete. But all this thinking might be hoping for nothing..
Z-Ring = no wobble. Yes it has wobble from the factory. No it should not be sold with a wobble. Print/buy Z-Ring. Install. Problem solved.
Youre better off with the Simucube 2 mate. Plenty of wheel and button setups out there. I know fanatec has been hitting it hard these past 2-3 years to get that market share and theyve been releasing some great products but I think you can easily get something similar like this for your Cube. The one thing I dont like about fanatec even though I own their stuff, is the fact they nickel and dime their customers with their whole "Eco system". With the money I spent on a CSL Elite Setup I could have just got a Simucube if I was patient and pad the little bit extra. Its like buying a motorcycle, get the one with more power because if you get the slow one to learn on youll grow out of it quick and want to upgrade shortly after.
@@iamjamen I saw Barry review that on this channel too, and it seemed to eliminate alot of the wobble out of the system which seems like a very goof add-on. But it didn't seem like a "rock solid connection" even after that. Yes, i'm being really anal about it but at that price point especially, i would expect more rigidity out of a DD system. Maybe if fanatec would redesign their wheel mount system to include something like the z-ring in metal, then i would probably consider it seriously.
Amazing review, but i have one question: Can you test the compatibility with Clubsport Wheelbase v2.5, do the buttons still work and shifters? Would like to know, as always thanks for review and your work.
You can find all this information by using Google or have a look at the Webshop page. For now it is ONLY working with the Podium DD Bases. Other Bases need a firmware update to get compatibility which is coming later this year. So, no, it's not working with a CSW v2.5 atm.
But, because you asked, the shifters are working because only the Button Module is not compatible yet.
The display doesn't work to the full extend on the 2.5 or the CSL so you have to buy their DD to use that
@@Fanatec_is_TRASH the display will work to the full extend on the CSW v2.5 but not at the moment as described in the Webshop page because a firmware update is needed which is expected later this year.
I was just wondering would buttons work but i guess no since Fanatec has not given any detailed information, thanks.
Kriss047 no, nothing works on the csw v2.5 yet.
How the heck do you get the iracing setup to use the lower spring paddles for braking and throttles?
could you drift with this wheel? how hard is it to let the wheel spin through your hands with thee D shape? Im looking for a good round wheel option for my podium dd1
Hi Barry. I hope you can answer this. I just received the kit your reviewing here. On the podium hub, i noticed one of the gold pins that connect to the motor is shorter than the rest. Is this normal??? Are you able to check on your hub if thats the case? Thank you in advanced
Yes, one is shorter than the rest.
Hi! Is this wheel compatible only with universal hub and podium hub, or i can connect it to a thirth part hub? it s cause i have a simucube and i want this Porsche 911 gt3 cup wheel.. xd
Like my Dad used to say... Porsche is 2 syllables! :D
Like nails on a chalkboard for me!
How well is the suede holding up ? If anyone has been using the suede rim for a while , how is the suede looking now ?
How'd you get the display to work like that what button or setting do I need to get to make it work
Did you end up getting it working? Just got mine and don't know how to get it like that
auwoody98au go here--->
forum.fanatec.com/discussion/1438/podium-button-module-endurance-software-package-incl-instructions/
Its in step 5 ---> Step 5: Install FanaLab 1.24 and enable Intelligent Telemetry Mode
Go to the folder "4. FanaLab_v1-24_beta" and start the "FanaLab_v1-24_beta.msi" to install FanaLab.
After the installation, close FanaLab if it's open.
Open the "Enable_ITM.reg" file in the "4. FanaLab_v1-24_beta" folder and accept the messages with yes.
Open FanaLab and use the button combination mentioned in the Quick Guide to switch through the ITM pages on the displays.
HOPE THIS HELPS!😎👍
Hey man i have the same podium-porsche combo but i cannot get any good settings for ACC.
I have terrible shaking-obscillations when going straight.
Can you give me your settings?
Thanks
@Sim Racing Garage hi Barry, There is a set with the same rim and podium bottom module endurance but with the universal hub. Could you please tell me if there's a benefit to get podium hub over universal hub for 100 €/$ more. I want to buy this set but can't decide between podium and universal hub. Thanks in advance.
The Universal hub comes with the standard shifters of the uni hub, so if you want better shifters a magnetic paddle upgrade will cost you 99dollar/euro making it a price of 650dollar/euro so actually if you want the podium paddles its the better deal with the podium hub because you get the podium paddles already in the deal so you save 80dollar/euro taking that one.
I have heard though that the magnetic paddle shifter upgrade of 99dollar/euro is actually stiffer then the podium paddle shifter upgrade so it’s totally up to you if you want the extra paddles or not.
Hope this helped you in any way and good sim racing !
( I’m looking for the same wheel at the moment so glad to share the knowledge)
i love your info mate you have made some of my buying decision easy, i am stuck on now to factors do i get the fanatec eco system or buy the simucube dd and get v3 peddles from fanatec and then what i am confused on is there way to hook up say fatantec wheels to the simubue dd base. cheers if anyone can share some info on it
I believe you can get Fanatec wheels to work on Simucube but it needs permanent cable between the steering wheel (Clubsport or Podium hub) and the PC (And a Fanatec - Simucube adapter ofcourse). As for the Podium wheels I think a lot of the functions of the wheel will NOT work. If you like the rims go for Fanatec, that is what I did. Even though I initially was looking for Simucube. But I was also already in Fanatec ecosystem.
Explosivefibers yeah I am not in that eco system at all but I do like the v3 peddles and shifter and handbrake. But over all thoughts on dd wheels sc2 seems to be the option I might go if I end up with dd base. I am weighing it up as it’s looking more n more like arm and leg just to get what Eva setup really. That said my mind keeps telling me it’s sc2 I want.
Are all podium series products only compatible with podium wheel bases?
Have MINE!
whats the rig this guy is using? Motion simulator and Shifter?
I really want to use this wheel with my moza r9, any idea how i can do it?
Hi Barry, how do you activate the telemetrie of the porsche whell? couldn't find anything about the settings in Fanalab 1.24 or in I-Racing.
Did you enabled the ITM for iRacing via Fanalab? Then you should see in the display the small text "ITM". Once you see that text, press the tuning menu button and turn the funky switch at the same time to scroll between the legacy mode and ITM.
@@isthernes still forget to turn IRacing to Hub :-) now it works
Hi Barry or chat, I'm after a dd wheel for more power as I like old group c cars and basically my tsxw clips like mad so I can only run I'm guessing about 1.half nm, I know I can get a simagic for 800 pounds but do I have any other options, some input would be grateful
Purchased mine yesterday 🤙
If i buy a clubsport version of this wheel for my v2.5 will the button module not work either?
I would imagine that it would work
another great review, just gotta say you have to many nice equipment on that wall (:
It the mounting bolt pattern 70mm?
Yes
I don't open instruction booklets, I look on this channel
just have to say, my newborn sleeeps like an angle when your channel is on. :) its so a win win:), only your loud intro i need to skip.
How do you get the wheel display the way you have it for iracing?
hello sorry for a question but the Fanatec together with this steering wheel also the podium hub or do you have to buy it separately?
You can purchase a complete wheel with the Podium Hub, Rim, and Endurance Module. Or you can purchase them separately.
@@simracinggarage3026 thanks I purchased the whole bundle
will the rim fit an Asher Racing button box?
just ordered this wheel with Xbox hub , i am currently using Xbox series x with dd1 podium will the oLED screen work with the xbox ?
Dunno if this or the 918 wheel is better
Does it have force feedback?
Besides the toys look of the button plate it actually looks pretty 👌.
I suspect Porsche are very choosy with whom they do business so their endorsement of Fanatec products is an indication to me of how good they are. This is also a great in depth review which led me to buy the clubsport version of this wheel.
Barry French why not the Podium version with the magnetic shifter paddles?
@@momorious Money! I already spent £4k on this hobby
barry wich tools will needed to build ?
When Fanatec brings out a push-pull rally shifter I'll grab one of those. These are great but I'm no fan of flappy paddles especially IRL.
Their current stick shifter doubles as a rally shifter. It has a rally knob and a stick shift knob and there’s a little switch on the bottom middle of the shifter body that you just switch the to side to turn it to push/pull mode
Hi everyone! Does anyone know the wheel screw size? This to mount the wheel itself on the podium hub, thanks in advance!
Or you could just watch the video and he goes over it many times...
@@DavidGarcia-oi5nt I did, I'm not that kind of person, did you listen to the size he says? Is not the one I've asked
PLEASE HELP!!!! my type C USB, seen on minute 12 just broke... anyone knows where to buy it?
Too bad you have to buy the DD to actually use the digital display, can you use it with a SimuCUBE?
No you can't