stable at 1300, 725, 1824 - 56mh at around 120w modded. the power increase vs stock bios was too small to pick up in my set up and at 725 can not compare like for like. good to have you back bbt and thanks for the tip about the 5600xt. got myself a few after checking your video on these and very pleased so far 40mh at around 80w
Thank you so much, your video is full of useful information, I'm new to mining and luckily found your youtube channel, I appreciate your effort for making this vid.
I have got this problem what you described at 3:10. The thing is I got this even on stocks. I can't find anything about it anywhere. Do you have any advice what it might be? Im running with 5x rx 5700 xt Pulse on an asus mining expert. Sometimes it does create those DAGfiles and running fine. But whenever i restart my rig for whatever reason. The next startup it randomly simply won't create the DAG stays at 0 mh and the miner will freeze when attempted to quit.
Thank you so much for taking the time out of your day to make this video. Can you please upload your Modded Bios for the 5700 XT ? I don't think I did mine right, its at 90*C on memory and only 55.8 MH
Did you copy the 1550mhz and 1500mhz ram timing to higher mhz timings? I had success with ArSock Phantom Gaming cards doing this but with the Red Devil I get about 3000 rejected shares per second and have reverted back to the stock bios for now.
Hey Carter, will the new RDNA2 cards require updated versions of miner software or will they work with the current version of phoenix / claymore miner?
It absolutely could, however, AMD is a lot closer to the mining community than nVidia. I would bet releases of the major miners will come out just ahead of its release.
I Bios modded some cards and was getting around 56-58 Megahash, but my acceptable shares dropped by 90%. The card never crashed and the miner kept running. I have a feeling that Megahash may not be the full story? :S
I'm looking to build several 5700 xt red devil rigs. My issue is finding the right tools to take advantage of hyper focused tuning. What are the tools you use? I currently am using nicehash and adjust my settings with MSI afterburner. My rigs however will all be on the Hive when fully configured. Any suggestions would be appreciated.
Hey @Bits Be Trippin'. I have a question. Ts it safe to use two molex heads for two risers on a single modular cable? gpu running at 96-97 watts in software
I have nodded my xfx triple 5700xt and I get good Mh but my noon question is since I nodded with strap copy and also tref timings so if I want to play any game at full setting of the game should I reflash the stock bios or simply switch to the other bios by the button before starting the system?
Nice video. I was wondering if you could help. Im building a 6 card, 5700xt and am trying to find a video showing how to setup settings in Adrenaline. Im not looking to change the bios either. Thankx
I know nothing about crypto mining. Would, or could, a Raspberry Pi be used to monitor and adjust these settings to be more efficient during a 24 hr period? When it is late at night and electricity is cheaper to use, a more aggressive setup might be worthwhile for larger mining rigs?
You could technically build a script in windows (powershell) to accomplish that, no need for a Rasberry Pi to handle that task. Most Linux based Mining OS, like simplemining or HiveOS both offer schedule/adjustments and automatic rebooting.
So if you had your pick ..5600 XT vs 5700XT ..which is a better choice.. cheaper per card and lower power..vs higher hash, $100 more and higher power use.
For the same price as an RTX2060 Super these days you can get similar hashrates and still have the versatility of mining other coins in future when ETH goes to 2.0, wouldn’t NVidia be a better buy in this case?
I have two modded and OC’d cards working perfectly when used individually... but when combined together into a single rig one of them loses power or stops mining completely (hash rate drops to 0.00) - any thoughts?
I bought a EVGA 1300 G PSU. I was planning on building a 6 card(5700XT). Will that PSU do the job? Also, Im looking for info on powering the risers and cards. Splitters, sata etc.
@@BitsBeTrippin Is it ok too take one pcie cable that has 2 ends(6+2) and put splitters on both? Then I could run two Red Devil 5700XT's off one pcie from psu?
5700 XT Ref. in my rigs: 51.8+ Mh @ 88W (reading in Phoenixminer) with Stock Bios. Power efficiency tuned. Memory at around 70c. If timing tuning add 10W @ less than 10% more Hashpower. Depending on the power cost if worth it. I'm at 30(ish) cents per kW/h in my country. For me.. Not worth the Timing tuning. Lower timings also makes memory run hotter (higher fan speed required), puts more stress on the memory power circuitry(longevity is decreasing).
![[ ออกกอง ] วัยหนุ่ม 2544 โลกหลังลูกกรง..ทัวร์กองถ่ายหนังใน "คุกของจริง" | JUSTดูIT.](http://i.ytimg.com/vi/vB--aOkZCpw/mqdefault.jpg)
stable at 1300, 725, 1824 - 56mh at around 120w modded. the power increase vs stock bios was too small to pick up in my set up and at 725 can not compare like for like. good to have you back bbt and thanks for the tip about the 5600xt. got myself a few after checking your video on these and very pleased so far 40mh at around 80w
@jminerI put bios from pulse BE on the 5600xt pulse i have for 2mh bump. thanks to Guntis, check his latest video ....
Great info, good analysis, Thanks again.
Thank you so much, your video is full of useful information, I'm new to mining and luckily found your youtube channel,
I appreciate your effort for making this vid.
I have got this problem what you described at 3:10. The thing is I got this even on stocks. I can't find anything about it anywhere. Do you have any advice what it might be?
Im running with 5x rx 5700 xt Pulse on an asus mining expert. Sometimes it does create those DAGfiles and running fine. But whenever i restart my rig for whatever reason. The next startup it randomly simply won't create the DAG stays at 0 mh and the miner will freeze when attempted to quit.
Valuable content. Thank you!
Great content! Do you have any suspicions as to why the wattage goes up?
How can you achieve these settings you made on linux hive OS ? Or is there no way around to switch to Win to do this ?
Thank you so much for taking the time out of your day to make this video.
Can you please upload your Modded Bios for the 5700 XT ? I don't think I did mine right, its at 90*C on memory and only 55.8 MH
Is there a video here on how to power tune this card?
Is this only for the XFX? Or any 5700XT?? I mean 54,70Mh out of the box vs 60Mh ultra modded...
Did you copy the 1550mhz and 1500mhz ram timing to higher mhz timings? I had success with ArSock Phantom Gaming cards doing this but with the Red Devil I get about 3000 rejected shares per second and have reverted back to the stock bios for now.
@Bits Be Trippin' have a question can you help me with this,can i split a molex into 2 to power 2 risers that are runing 2 100w cards?
Hello Bits Be Trippin', this is very good video, thx btw. How do you measure the consumption in watts in the risers?
You are the best 👍
Did you just modify the setting in gpu mod app or did you do something else
Hey Carter, will the new RDNA2 cards require updated versions of miner software or will they work with the current version of phoenix / claymore miner?
It absolutely could, however, AMD is a lot closer to the mining community than nVidia. I would bet releases of the major miners will come out just ahead of its release.
I Bios modded some cards and was getting around 56-58 Megahash, but my acceptable shares dropped by 90%.
The card never crashed and the miner kept running. I have a feeling that Megahash may not be the full story? :S
I'm looking to build several 5700 xt red devil rigs. My issue is finding the right tools to take advantage of hyper focused tuning. What are the tools you use? I currently am using nicehash and adjust my settings with MSI afterburner. My rigs however will all be on the Hive when fully configured. Any suggestions would be appreciated.
Hey @Bits Be Trippin'. I have a question. Ts it safe to use two molex heads for two risers on a single modular cable? gpu running at 96-97 watts in software
Hi, Could you recommend any good power meter?
Kill a watt
Please tell us how to bios mod do for 5600xt MECH OC Micron
I have nodded my xfx triple 5700xt and I get good Mh but my noon question is since I nodded with strap copy and also tref timings so if I want to play any game at full setting of the game should I reflash the stock bios or simply switch to the other bios by the button before starting the system?
great video! :)
We building a 13 card 5700 on a asrock board this weekend? That’s my request.
Working on getting that setup
Nice video.
I was wondering if you could help. Im building a 6 card, 5700xt and am trying to find a video showing how to setup settings in Adrenaline. Im not looking to change the bios either.
Thankx
I know nothing about crypto mining. Would, or could, a Raspberry Pi be used to monitor and adjust these settings to be more efficient during a 24 hr period? When it is late at night and electricity is cheaper to use, a more aggressive setup might be worthwhile for larger mining rigs?
You could technically build a script in windows (powershell) to accomplish that, no need for a Rasberry Pi to handle that task. Most Linux based Mining OS, like simplemining or HiveOS both offer schedule/adjustments and automatic rebooting.
It's hashing more so it should be using more watts.
So if you had your pick ..5600 XT vs 5700XT ..which is a better choice.. cheaper per card and lower power..vs higher hash, $100 more and higher power use.
Honestly, 5600 XT 6GB GPU. The lower cost of entry helps you pay it off much quicker and cant beat 42mh with little effort.
@@BitsBeTrippin can you dona segment working through a 5600xt to 42mh
For the same price as an RTX2060 Super these days you can get similar hashrates and still have the versatility of mining other coins in future when ETH goes to 2.0, wouldn’t NVidia be a better buy in this case?
I have two modded and OC’d cards working perfectly when used individually... but when combined together into a single rig one of them loses power or stops mining completely (hash rate drops to 0.00) - any thoughts?
Same here
I'm seeing a rx 5700 without XT, and my doubt is: I must save the money to wait and buy a rx 5700 xt. Cost benefit better from my payback?
There is no benefit of buying a RX 5700XT. The XT performs exactly the same as the non XT when flashed.
I bought a EVGA 1300 G PSU. I was planning on building a 6 card(5700XT). Will that PSU do the job? Also, Im looking for info on powering the risers and cards. Splitters, sata etc.
GRUBBERZZZ more than enough power. Just make sure to tweak the core/mv settings
@@BitsBeTrippin Is it ok too take one pcie cable that has 2 ends(6+2) and put splitters on both? Then I could run two Red Devil 5700XT's off one pcie from psu?
@@grubberzzz9982 8pin (6+2) is rated for 150W. 6pin is rated for 75W. So you can split an 8pin to two 6pin.
@@grubberzzz9982 8pin (6+2) is rated for 150W. 6pin is rated for 75W. So you can split an 8pin to two 6pin.
What temp of memory did u get ? my rig is getting 90 C even 92-94 sometime . Is that normal?
I take memory down to mvddc to 820 vs 850 ; it will drop it to 85-88c
@@BitsBeTrippin thx very much brother !!!! 👍👍👍🤴🤴🤴
@@BitsBeTrippin Core Voltage 743, core clock 1350 , memory 1840 = 92-94 memory temp :/
Can you play games on it
5700 XT Ref. in my rigs: 51.8+ Mh @ 88W (reading in Phoenixminer) with Stock Bios. Power efficiency tuned. Memory at around 70c.
If timing tuning add 10W @ less than 10% more Hashpower. Depending on the power cost if worth it. I'm at 30(ish) cents per kW/h in my country. For me.. Not worth the Timing tuning. Lower timings also makes memory run hotter (higher fan speed required), puts more stress on the memory power circuitry(longevity is decreasing).
Phoenix overreports !
How is that true when I see the values reflected on the pool?
no done it and it doesnt
tahts sux and you ride on windows.. awfull