Land Rover Bosch V8 Liner Removal - Part 1

Removing the cylinder liners/sleeves on a 2003 4.6L V8 Bosch engine. Used a propane-powered torch to heat the block and then a punch and ball-peen hammer to remove the sleeves. Cylinder number 4 was full of coolant and was causing the engine to overheat. The piston head and cylinder head exhaust and intake valves were steam cleaned as a result of coolant seeping through a pin-hole in the aluminum cylinder wall. This block is going to the machine shop tomorrow to be prepared for a DIY flanged/top-hat sleeve installation.
Check out my other videos to see the pin-hole leak under pressure.