Masada Gel Ball Tech in USA - LDX gearbox installation tips - Upgrade Honey Badger Gel Blaster
ฝัง
- เผยแพร่เมื่อ 11 พ.ค. 2024
- Reach out to @MasadaGbTech for professional upgrades and customisation of your gel blasters. Most vouched gel blaster tech in USA, Arkansas based.
Honey Badger, Sijun HK416, SR16, LDT LDX gearbox, gsl gearbox and more to count. - กีฬา
Good choice in gels to
🙌🙌
Amazing!!
If you don't want to cut out the plate that’s in the top of the mag well use the ldt tpiece and where the oring goes around the feeder tube and there's two slots on either side cut it with a razor blade through the top of those slots and it should fit ,i put a ldx basic in mine for a while but threw the outer barrel and used a old standard nylon slr outer barrel adapter and screwed the suppressor straight onto that and also had to cut the ldt tpiece shorter at the front where the inner barrel goes in a had to shorten the two side stabilising flaps to fit in the outer barrel adapter but it's now got a mk tactical hpa gearbox with a polarstar jack and a 25cm 7.3mm stainless inner barrel and it's a real feather weight now
Good idea!
I was thinking about installing the same gearbox in my honey badger did you have to use the original honey badger T piece or the one that came with that gearbox
Both work. @Masada can better recommend the most suggested ways.
Im sorry I replied to this comment yesterday and just noticed it did not post 😅 but yes the original T piece will work but it's advised to use the Ldt T piece for better air seal! You can try and bowl your Honey badger T piece in HOT water to remove it first!
Thanks man I'm just trying to figure out what t peace that works the best what FPS is that thing hitting with that LDT gearbox I got my stock gearbox hitting 300 ft per second buy disabling the blowback 1.3 spring and I polished the inside of the stock Barrel I am going to put the 7.3 stainless steel barrel on it should bump me up a little more but I was just curious because when the stock gearbox craps out I'm definitely switching to the LDT gearbox
@@joshuadiffenderfer3589 with stock spring this blaster was shooting constant 280 😅 he did not want to shoot his kids too bad haha
@@MasadaGbTech I got you🫡
Is that a MK box on the bench
Yes. @MasadaGbTech used it for the ACR customisation! Really good!!
🙌🙌 gen 9/10
@@akgelblaster yeah they are I have built so many of them and love the MK boxes
They are also the only ones that do the gen9/10 CNC 6061 gearboxes
I was wondering how long it would be before they started using them in America
@@MasadaGbTech I have looked at a few of you videos and it looks like you do some pretty good builds for the time you have been doing it
@@coreyrich2567 lots of hands on experience and many months or research 💪 also destroyed a lot of parts to see what can and what cannot work!