apply to drive for gp transco + other stuff ⬇ linktr.ee/alexthetruckingguy my full day in the life videos ▶ th-cam.com/play/PLqb3r_qeRLL7d61kF72wrlbbYrzXqb2Xq.html stuff i use for the trucking lifestyle amazon store ▶ www.amazon.com/shop/influencer-ebe5b72b side note: be aware of scammers. the real creator has their name highlighted like I do. anyone without their username highlighted is not real. plz ignore the scammer. 🙂 Love ya'll 👊
Sorry, but this is the only way that I can think of getting your attention but your sensors are only on the truck and you have three sensors. Do you have one on the front axle year tires one on the front rear axle which is your forward drive axle and one on your rear drive axle so when it says forward rear axle that means your front drive axle.
It's great to see you work for a company that is proactive in taking care of there equipment! When companies do that, it actually saves there drivers time, and saves the company money!😊💛
exactly they probably loose more money having to pay for an external mechanic and for the trailer to be out of service not making money, and those parts could have been under warranty also
Alright so a few things for ya. 1. Adding fuel doesn’t transfer any weight from the trailer onto your truck. It simply adds weight on your drives and steer. Trailer weight will be the same. 2. Axle temperature gauges read the oil for your drive axle to let you know if it’s overheating. Has nothing to do with your brakes at all and definitely nothing to do with your trailer. 165 degrees is absolutely fine. I do heavy haul and I’ve had mine up to almost 300. That’s when you need to be concerned.
15:25 forward rear axle temp is the temperature of the gear oil in your front drive axle and rear axle oil temp is the temperature of the gear oil in your rear drive axle. Each drive axle has its own oil temp sensor. You should see a sensor on the rear of each differential.
Hey bud! Thanks for another great video! Little trick, keep a tennis ball with you. They are the prefect size to stick in the gas handle and hold it on should the thing be broken! 😉 will save your life should you get another broken pump!
3:07 there should be a little check box to click for a split sleeper. I've used it a bit if i get hung up at shippers/receivers after 2 hours sitting clock will stop and go back to time when you stopped.
I just finished a shift using 3/7 , it saves your bacon and gives you a good next day. Started 0400 end at 2200 . I'll be sly like a baby. Heavy winter weather at Nevada/Utah state line
Feel your pain of refuelling with holding the handle!! I found a small rock many years ago that I used when I drove. In fact, it's still in my pocket as I type.
Alex, always prioritize utilizing your jake brakes when going down any grade over your actual brakes. Brake fade can happen sooner than you realize. Let the engine do all the work
Hi Alex. Just watched this video, where you were filling your Truck with diesel and struggling to keep the handle open. In the UK 🇬🇧we use a tennis ball 🎾 and squash it into the trigger handle. Saves the hand for sure…Hope it helps 👍🏻
You know you can use the cruise control when going downhill. Just adjust your set speed and over speed and you’re good to go. Truck will adjust the jakes and downshift to maintain speed. Super easy
Axle temps are showing you the temperatures on both of the trucks drive axles, front axle temp is the first set of wheels/tires on the rear of the truck closest to the sleeper and rear axle temp is the rear set of wheels/tires at the back of the truck.
Nice to see that your company takes care of their trucks and that cares for you, that's hard to find these days. Always great to see you upload and looking forward to more adventures from your inspiring channel. Truck names = Benny, or Gary 😃🙏✌
Alex, you've got to be the cutest little big trucker in America 💪 You're going right by me on this route! I don't think I've ever heard my state called "regular Virginia" 😂
As a Heavy-Duty mechanic, we work on a lot of customers' trucks and heavy equipment. Some customers come in for a single tire replacement but if you are going to change one tire, you better change everything. That's how it works in the shop (I guess, not all shop but most of the shops up here in Canada do work like that). If you are replacing a brake, you going to replaced both side. I guess what I'm trying to say is, everything will be replaced in a pair. 😅
If you hit the cruise on button then set or resume. It should bypass your truck wanting to shut off when your cooking. It should idle up to 800 rpm give or take.
Forward rear axle is the forward rear drive axle, rear is the rear drive axle, also that truck should have a Jake brake to help with downhill grades, that would be better than using the actual brakes
The rear forward axle is the main drive axle closet to the cab, rear axle temp being the secondary drive axle farthest from the cab, both attached to the truck. At least in my case, and mine has an auxiliary sensor option that can be hooked up (trailer, asphalt load, etc) love the content! Freddy Freighter! Love the name
Good maintenance is byfar your best friend when it comes to anything mechanical, a couple extra hours to make sure everything works properly during a tire change can save you days of downtime later on! Maintenance is key, it seems like down time but it saves time. Imagine yourself in a situation where you have actually get on the brakes and cook em to keep from getting in a wreck but your aircans aren't working on your trailer, or shear the connecting pins making your trailer brakes inoperable, that's more distance it takes you to stop
The foward axle temp you are asking about is the drive axle closest to the back of sleeper and the rear axle is the one right behind it and they are showing you the oil temperatures in your trucks drive axles. I don’t know of anyone that is able to read the trailer axle temps since there is only oil in the hubs for the bearings. Good luck and hope I cleared that up for you
Alex it's a good thing that they take care of the trucks that's a good sign of a good company you will make it up don't worry about it keep on going my friend
Alex not sure if you know but coming up soon is the Nationwide 48 Hour DOT Blitz where all states spend 48 consecutive hours trying to crackdown on driver and company violations. The Blitz usually grabs a lot of drivers off guard with truck upkeep, ELD's and paperwork. It's always fun but you are from what I can see a responsible and professional driver so you just keep on trucking.
Umm its 72 hours please know what you're talking about before posting misinformation.....and most truckers know about the blitz it's not till in May or June
Dude your temps ( 2nd and 3rd axle ) are absolutely fine .( these needs to be warm ). the only way to overheat the differentials is to go off road or to pull super heavy ( convoy style )
Keep it up kid!!! Don’t forget to use that jake brake going downhill .. never over complicate things.. park in the loves reserved spot as long as ur staying in ur truck.. they never usually sell out during the week, also let the mechanic handle anything they decide to and bill the company.. u don’t have to get on a scale at every single stop .. cutting time on bs will help u get money when it’s time to fun with the big dogs!! And oh yeah when the mechanics are doing work on ur truck then log urself in the sleeper!!!! Ima get u a trucker cheat sheet 😂😂
Holy crap Alex you better watch out for the lot lizards. I have seen a couple gringas with a ping. When I was fueling. Alex you need to name your truck. I hate to remind you are coming to my state, North Carolina an welcome. Keep Safe and enjoy the warm weather.
Use your Jake brake when going down hill and put it in manual mode im sure you have an auto 12 spd so depending on how fast you go but down hill 55 mph 11th gear is good with the Jake brake, seen way to many truckers smoke up their brakes when they hold their brakes
Also on 2023 freightliner remember between from line to line is roughly 100 miles depending on your weight ect so a full tank u can go 800 miles. Fuel light comes on u can another 100 miles before your completely empty.
Sometimes depends on how far the pickup tube reaches into the tank, there's a point when low it could start sucking air it's always Best keep the fuel above 1/4 mark or even 1/2 especially in winter time
Alex, just a tip from a former trucker, once your workday is over, and your drivetime is over never cross or drivers seat. Try to use passager door only, even if DOT officer is knocking at your drivers door.
@@FDSixtyNine because once you cross your drivers seat, Technically by law you have to claim that is drivetime. Many DOT officers use it as a trick to get a violation on you.
Well, you’ll have a good company then if they want to fix and lubricate and replace everything all at once. It’s probably so you don’t have to come back. You can start off your trip or the month of February with brand new everything and you don’t have to come back or have any problems. You are very lucky to have a company like that.
That is the drive axels temp.not the brakes. The gear oil in the axels get hot because the geare are working hard, hills put more strain on the gears witch cause heat
When they had the trailer in, just makes since to do the whole thing. Definitely understand wanting to get it done and moving. "Im cheap" lol, bro you are making good money and you have a thriving TH-cam channel which has to be paying you some decent cash. Live a little. Great channel, be safe.
Finally seen one of your company truck near my home at the Loves. They looks so good on the road. I have been looking for your trucks since I started watching your channel. Maybe it was you here in North East, Ohio!
i really admire trucking from these videos......💪💪 i joined this channel about month and a half ago when it had 618k subs but now its 625k good progress.
You have 3 axles on your truck. The "forward rear axle" is the forward most axle in your rear. Then you have the rear most axle. Then you have the front axle. Does that make sense? You have 2 drive axles which are both in the rear. Out of those 2, you have a "forward rear" and a "rear most" axle. And you're correct, your truck is not monitoring the trailer axle temps.
What’s funny is I’m also a truck driver and I always watch your videos while driving whenever you post😂 and I ALSO have a garmen gps and whenever you get a route, my garmen here’s your voice and changes my gps😂😂 annoying sometimes but every part of that video I have to pause it and cancel the requests
Start downhill same gear you used to climb hill, Utilize your Jake brake depending on weather and make sure you practice pumping the breaks going downhill. 4 seconds on 4 off. Just a tip 😉 5mph increments in speed drop.
@@francesacoy4730 The idea of pumping breaks is to prevent them from getting hot. Unless your in a manual. Even then yoi should. Some people just have their foot constantly on the brake which leads to burning up. Always worked for me. Drop speed by 5mph increments.
@@francesacoy4730 so what do you do going down hill? Just let it ride? No brakes? Surely you down shift before going down hill. Unless your one of those super truckers barreling down mountains which I don't recommend.
@@joeljbean thanks for the response. Complicated answer. Perhaps the newer trucks are different? I was taught to use lower speed, about the same going down as you go up the MTN. Pumping the brakes used to overheat so keeping steady pressure on the brake and not using the Jake. Used to drive hazardous, never had a problem with a load. Hauled mostly Western where real mtns are.
Hey Alex, Looking good fella. You already know I love watching you truck. You sure know how to do responsibility. A great character in a man. Would love to DM you Alex but I don’t do social media. Sad for me🙁 What about naming the truck ‘bluebell’. What do you think 🇬🇧
adding fuel does nothing to affect the weight of your trailer. as long as the trailer is below 34,000 you are good. I do not understand why you want to add fuel to make your load legal.
Freddy Freighter!! Just another option, we’ll be waiting and interested to see what name you decide! Tell them you need an uphill tune screw the mpg uphill when you are being a safety issue!
1-Truck name "TURQ" for turquoise 2-Diesels don't like gasoline 3-Axle Temp sensors are for your drive axles fwd and rear 4-fuel is 7 lbs a gallon and tandems slide on the trailer to move weight 5-never ride your brakes going down hill. Use your engine brakes. If the engine brakes aren't holding you slow enough then try for a lower gear and if you're already going to fast then use stab technique where you brake fairly hard for just a few seconds and then let off so the brakes can cool down for a few seconds and repeat that until bottom of the hill. 6-watch where you grab back there on those trailer axles because rapidly moving parts can sure ruin your day/year/life
I don’t understand why you worried about fueling with half a tank and your weights being legal. If you have a load of 39000 you can be fully fueled and still have room to work with. With a Cascadia and dry van you can haul approximately 45,000 lb load and still be under 80,000 if they load it right. Slide the tandems to make sure your drives and trailer tandems are under 34,000 and roll. Weigh stations are just making sure your total is under 80,000 and your under the 34,000 on your tandems and drives.
You going back through Virginia on 77again down Fancy Gap Mountain, down to Brintles Truck, be careful getting in and out of there. Godspeed from Virginia.
I learned from another youtuber that you can't replace just one tire. They would to replace the pair. Don't have to do them all but they have to do the pair.
there is a 4 year old snowboarder on youtube, her dad attaches a mic to her and just lets her go and she talks to herself, sings, etc. she's super cute and really fun! This channel gives me those vibes!!! It would be so interesting to hear what your life was like as a child if you dad attached a mic to you and just let you do your thing!
They seen the trailer needed more done. Its getting the season where D.O.T starts their unexpected all levels inspections and you want to keep your record clean and the company. Have a safe trip. Thanks for sharing. By the way whats the color is your truck called. Its like a blue but looks like it has a greenish tint to it ?
Replace these things don't you know what they are. Your slack adjusters. Your S cams. That is an old trailer with drum breaks. You have to be careful In Winter time they freeze. And driving in the snow you have To be careful. And in Winter time make sure that you keep that 5th will Greece.
Front axle temp is oil temp of front drive axle of tractor rear axle temp is oil temp of rear drive axle on tractor. Doesn't their company trucks have an engine brake? Stage two going down that hill would keep you at speed and barely use brakes. Your gross with 39000 on should have been 74 or 75000 full of fuel and def you and your stuff.
Use your engine brake more going downhill if you use it correctly you'll barely have to tap on your service brake at all maybe get it to the speed you want
Alex, I know good and well you’re not holding your brakes when you’re going down a mountain my guy. Be careful, you can lose your brakes if they get to hot
Translate it to Spanish all vids and see ur views and etc. skyrocket 📈🚀🌕 I wish I could meat u I’m working for FFE currently have been watching you since before I started cdl school. Much love bro from Houston.
Alex, name your truck *"232074"* -- Oh, wait! It already has that name! (Even though you try to cover it with blue rectangles in your video editing) 😂🤣😂🤣😂🤣
Don't worry about that weight station they go after hot shots more there for some reason everytime I ride by theres always one in there getting dot inspection 😂
Hello just wanted to say I love your videos keep up the good work and be careful out there driver oh and I don't know if you're taking ideas for names but what about Frank short for Freightliner I know it doesn't match
Split sleeper berth there's a tab in samsara that activates your sleeper berth...your supposed to play with samsara and get familiar with the program. It's in your settings.
apply to drive for gp transco + other stuff ⬇
linktr.ee/alexthetruckingguy
my full day in the life videos ▶
th-cam.com/play/PLqb3r_qeRLL7d61kF72wrlbbYrzXqb2Xq.html
stuff i use for the trucking lifestyle amazon store ▶
www.amazon.com/shop/influencer-ebe5b72b
side note: be aware of scammers. the real creator has their name highlighted like I do. anyone without their username highlighted is not real. plz ignore the scammer. 🙂
Love ya'll 👊
Sorry, but this is the only way that I can think of getting your attention but your sensors are only on the truck and you have three sensors. Do you have one on the front axle year tires one on the front rear axle which is your forward drive axle and one on your rear drive axle so when it says forward rear axle that means your front drive axle.
What are those floor mats you use where can I buy them there not on your Amazon link
Name your truck Casey
@@justinfuller3053he said in an earlier video that he bought them from WeatherTech
Alex What part of nc you get to ? Mount airy ?
It's great to see you work for a company that is proactive in taking care of there equipment! When companies do that, it actually saves there drivers time, and saves the company money!😊💛
exactly they probably loose more money having to pay for an external mechanic and for the trailer to be out of service not making money, and those parts could have been under warranty also
@@sugarskulllyfe5890 lose
Their*
Hey Alex, I just got my CDL today and was heavily inspired by you and your channel! Thank you so much for the content you provide and stay safe!
If you go with Schneider I'll split the referral $ with you
@@alexhowley9834 i just got my email today for orientation for schneider. Is it to late to add you
Alright so a few things for ya.
1. Adding fuel doesn’t transfer any weight from the trailer onto your truck. It simply adds weight on your drives and steer. Trailer weight will be the same.
2. Axle temperature gauges read the oil for your drive axle to let you know if it’s overheating. Has nothing to do with your brakes at all and definitely nothing to do with your trailer. 165 degrees is absolutely fine. I do heavy haul and I’ve had mine up to almost 300. That’s when you need to be concerned.
Yeah I didn’t get what he was saying about adding fuel and helping transfer weight. I’m sure he misspoke, at least I hope he did.
@@rayray1379 he just doesn't know lol. Still I like his videos they're funny and entraining usually. Some trucker vloggers suck
@@jimmypappas9780 when I'm watching his videos, there are a lot of WTF did he just say moments....🙄🙄🙄🙄
He never said it transferred weight from the trailer… Just that it would balance out after adding fuel…
What Greg said.
15:25 forward rear axle temp is the temperature of the gear oil in your front drive axle and rear axle oil temp is the temperature of the gear oil in your rear drive axle. Each drive axle has its own oil temp sensor. You should see a sensor on the rear of each differential.
Worth a mention that the foward temp will be much higher because that axle dose most of the work and passes power to the rear.
Hey bud! Thanks for another great video! Little trick, keep a tennis ball with you. They are the prefect size to stick in the gas handle and hold it on should the thing be broken! 😉 will save your life should you get another broken pump!
3:07 there should be a little check box to click for a split sleeper. I've used it a bit if i get hung up at shippers/receivers after 2 hours sitting clock will stop and go back to time when you stopped.
Not every company allows split sleeper. He may not have had a choice
He has it. It's in his settings we use samsara
I just finished a shift using 3/7 , it saves your bacon and gives you a good next day. Started 0400 end at 2200 . I'll be sly like a baby. Heavy winter weather at Nevada/Utah state line
Feel your pain of refuelling with holding the handle!! I found a small rock many years ago that I used when I drove. In fact, it's still in my pocket as I type.
Alex, always prioritize utilizing your jake brakes when going down any grade over your actual brakes. Brake fade can happen sooner than you realize. Let the engine do all the work
I've seen many smoking tires going down the grapevine.
Hi Alex. Just watched this video, where you were filling your Truck with diesel and struggling to keep the handle open. In the UK 🇬🇧we use a tennis ball 🎾 and squash it into the trigger handle. Saves the hand for sure…Hope it helps 👍🏻
You know you can use the cruise control when going downhill. Just adjust your set speed and over speed and you’re good to go. Truck will adjust the jakes and downshift to maintain speed. Super easy
Those things are slack adjusters. Fuel isn’t making you even out. It just makes your truck heavier
Axle temps are showing you the temperatures on both of the trucks drive axles, front axle temp is the first set of wheels/tires on the rear of the truck closest to the sleeper and rear axle temp is the rear set of wheels/tires at the back of the truck.
Hi Alex I am glad your enjoying your new truck and driving like a pro
Nice to see that your company takes care of their trucks and that cares for you, that's hard to find these days. Always great to see you upload and looking forward to more adventures from your inspiring channel. Truck names = Benny, or Gary 😃🙏✌
Very hard. Mostly all companies see us as robots generating them millions
Alex, you've got to be the cutest little big trucker in America 💪
You're going right by me on this route! I don't think I've ever heard my state called "regular Virginia" 😂
As a Heavy-Duty mechanic, we work on a lot of customers' trucks and heavy equipment. Some customers come in for a single tire replacement but if you are going to change one tire, you better change everything. That's how it works in the shop (I guess, not all shop but most of the shops up here in Canada do work like that). If you are replacing a brake, you going to replaced both side. I guess what I'm trying to say is, everything will be replaced in a pair. 😅
Not true
If you hit the cruise on button then set or resume. It should bypass your truck wanting to shut off when your cooking. It should idle up to 800 rpm give or take.
Forward rear axle is the forward rear drive axle, rear is the rear drive axle, also that truck should have a Jake brake to help with downhill grades, that would be better than using the actual brakes
This man makes me wanna become a TRUCKER
No it doesn't. You seem to get carried away too easily
@@smwoutdoorfishingadventures well seeing as I am a single male with no kids…. Idk 🤷
@@TrentMcNary420 do it man. Responsible for yourself and good $. Get to see the country
@@TrentMcNary420 don't let him down you man, become a Trucker, nothing wrong with Hustling to make the World a Better Place. Good Luck 👍.
Do what you think is right 👍🏽 I’m in a trucking school trying to get that CDL. Drivers who try to to bring others down are not fit to be truck driver.
The rear forward axle is the main drive axle closet to the cab, rear axle temp being the secondary drive axle farthest from the cab, both attached to the truck. At least in my case, and mine has an auxiliary sensor option that can be hooked up (trailer, asphalt load, etc) love the content! Freddy Freighter! Love the name
Saved myself from typing it for Alex.
Good maintenance is byfar your best friend when it comes to anything mechanical, a couple extra hours to make sure everything works properly during a tire change can save you days of downtime later on! Maintenance is key, it seems like down time but it saves time. Imagine yourself in a situation where you have actually get on the brakes and cook em to keep from getting in a wreck but your aircans aren't working on your trailer, or shear the connecting pins making your trailer brakes inoperable, that's more distance it takes you to stop
The foward axle temp you are asking about is the drive axle closest to the back of sleeper and the rear axle is the one right behind it and they are showing you the oil temperatures in your trucks drive axles. I don’t know of anyone that is able to read the trailer axle temps since there is only oil in the hubs for the bearings. Good luck and hope I cleared that up for you
Alex it's a good thing that they take care of the trucks that's a good sign of a good company you will make it up don't worry about it keep on going my friend
Alex not sure if you know but coming up soon is the Nationwide 48 Hour DOT Blitz where all states spend 48 consecutive hours trying to crackdown on driver and company violations. The Blitz usually grabs a lot of drivers off guard with truck upkeep, ELD's and paperwork. It's always fun but you are from what I can see a responsible and professional driver so you just keep on trucking.
Umm its 72 hours please know what you're talking about before posting misinformation.....and most truckers know about the blitz it's not till in May or June
The blitz it’s until the summer bro around June
That’s never been an issue for me. I make sure to take the days off.
Pretty good backing into those docks, I could never do it.
Ooo a longer video now we talkin and the company obviously looks after their stuff which is great
Forward drive Axle is the first Axle behind you. The rear Axle is the second behind you.
Maintenance is what makes the difference between a good and bad company.
Dude your temps ( 2nd and 3rd axle ) are absolutely fine .( these needs to be warm ). the only way to overheat the differentials is to go off road or to pull super heavy ( convoy style )
Keep it up kid!!! Don’t forget to use that jake brake going downhill .. never over complicate things.. park in the loves reserved spot as long as ur staying in ur truck.. they never usually sell out during the week, also let the mechanic handle anything they decide to and bill the company.. u don’t have to get on a scale at every single stop .. cutting time on bs will help u get money when it’s time to fun with the big dogs!! And oh yeah when the mechanics are doing work on ur truck then log urself in the sleeper!!!! Ima get u a trucker cheat sheet 😂😂
Hey Alex it better to be safe than sorry that you’re stuck on the side of the road that company seems like they care be safe and keep on trucking 😊
Holy crap Alex you better watch out for the lot lizards. I have seen a couple gringas with a ping. When I was fueling. Alex you need to name your truck. I hate to remind you are coming to my state, North Carolina an welcome. Keep Safe and enjoy the warm weather.
Explanation 100%. Best ever trucking guy. 💙
Use your Jake brake when going down hill and put it in manual mode im sure you have an auto 12 spd so depending on how fast you go but down hill 55 mph 11th gear is good with the Jake brake, seen way to many truckers smoke up their brakes when they hold their brakes
I was going to leave a comment about how you never post about your early hours. But you gave us a glimpse with this post. Thanks! Peace.
Also on 2023 freightliner remember between from line to line is roughly 100 miles depending on your weight ect so a full tank u can go 800 miles. Fuel light comes on u can another 100 miles before your completely empty.
Sometimes depends on how far the pickup tube reaches into the tank, there's a point when low it could start sucking air it's always Best keep the fuel above 1/4 mark or even 1/2 especially in winter time
Alex, just a tip from a former trucker, once your workday is over, and your drivetime is over never cross or drivers seat. Try to use passager door only, even if DOT officer is knocking at your drivers door.
Why?
@@FDSixtyNine because once you cross your drivers seat, Technically by law you have to claim that is drivetime. Many DOT officers use it as a trick to get a violation on you.
And when you pull into a truck stop and your day is over get out of that seat as soon as brakes are pulled...
this doesnt matter and never will.
@@2AwesomeDogs Talk about entrapment
Well, you’ll have a good company then if they want to fix and lubricate and replace everything all at once. It’s probably so you don’t have to come back. You can start off your trip or the month of February with brand new everything and you don’t have to come back or have any problems. You are very lucky to have a company like that.
Used to be the scales were closed and some are open now, however some vehicles have electronic devices so you don't have to go into the scale.
That is the drive axels temp.not the brakes. The gear oil in the axels get hot because the geare are working hard, hills put more strain on the gears witch cause heat
When they had the trailer in, just makes since to do the whole thing. Definitely understand wanting to get it done and moving. "Im cheap" lol, bro you are making good money and you have a thriving TH-cam channel which has to be paying you some decent cash. Live a little. Great channel, be safe.
Looks like you came right down the turnpike in WV, I’m from Charleston and know those mountains well!
Finally seen one of your company truck near my home at the Loves. They looks so good on the road. I have been looking for your trucks since I started watching your channel. Maybe it was you here in North East, Ohio!
i really admire trucking from these videos......💪💪 i joined this channel about month and a half ago when it had 618k subs but now its 625k good progress.
Less fuel equals less weight. Even if your rear axle is at 33,000 pounds and your drives are at 25,000. It doesn't matter you are still legal
You have 3 axles on your truck. The "forward rear axle" is the forward most axle in your rear. Then you have the rear most axle. Then you have the front axle. Does that make sense?
You have 2 drive axles which are both in the rear. Out of those 2, you have a "forward rear" and a "rear most" axle. And you're correct, your truck is not monitoring the trailer axle temps.
KEEP ON TRUCKING ALEX
What’s funny is I’m also a truck driver and I always watch your videos while driving whenever you post😂 and I ALSO have a garmen gps and whenever you get a route, my garmen here’s your voice and changes my gps😂😂 annoying sometimes but every part of that video I have to pause it and cancel the requests
GREAT love preventative maintenence. Spend the time now, not down the road
" regular Virginia" 2:40 flmao never ever heard somebody .say this... omgg
Start downhill same gear you used to climb hill, Utilize your Jake brake depending on weather and make sure you practice pumping the breaks going downhill. 4 seconds on 4 off. Just a tip 😉 5mph increments in speed drop.
Pumping the brakes on a downhill I grade? You may have driven out West? Doing that down a 6 percent grade will lead to very hot brakes or no brakes!
@@francesacoy4730 The idea of pumping breaks is to prevent them from getting hot. Unless your in a manual. Even then yoi should. Some people just have their foot constantly on the brake which leads to burning up. Always worked for me. Drop speed by 5mph increments.
@@francesacoy4730 so what do you do going down hill? Just let it ride? No brakes? Surely you down shift before going down hill. Unless your one of those super truckers barreling down mountains which I don't recommend.
@@joeljbean thanks for the response. Complicated answer. Perhaps the newer trucks are different? I was taught to use lower speed, about the same going down as you go up the MTN. Pumping the brakes used to overheat so keeping steady pressure on the brake and not using the Jake. Used to drive hazardous, never had a problem with a load. Hauled mostly Western where real mtns are.
Cheers 🍻
be thankful alex!
Excellent video stay safe out there.
Finally a longer vid, thanks man
Hey Alex,
Looking good fella. You already know I love watching you truck. You sure know how to do responsibility. A great character in a man.
Would love to DM you Alex but I don’t do social media. Sad for me🙁
What about naming the truck ‘bluebell’. What do you think 🇬🇧
“Chemical guy” referring about the tanker 😂😂😂
adding fuel does nothing to affect the weight of your trailer. as long as the trailer is below 34,000 you are good. I do not understand why you want to add fuel to make your load legal.
Freddy Freighter!! Just another option, we’ll be waiting and interested to see what name you decide! Tell them you need an uphill tune screw the mpg uphill when you are being a safety issue!
Alex, put a pack of long, but thin zipties in passenger side door for broken gas pumps -- just clip it off when you're done obviously...
na, you leave it on to screw over the next guy. yes, im that guy.
1-Truck name "TURQ" for turquoise
2-Diesels don't like gasoline
3-Axle Temp sensors are for your drive axles fwd and rear
4-fuel is 7 lbs a gallon and tandems slide on the trailer to move weight
5-never ride your brakes going down hill. Use your engine brakes. If the engine brakes aren't holding you slow enough then try for a lower gear and if you're
already going to fast then use stab technique where you brake fairly hard for just a few seconds and then let off so the brakes can cool down for a few seconds and repeat that until bottom of the hill.
6-watch where you grab back there on those trailer axles because rapidly moving parts can sure ruin your day/year/life
Cassie would be a good name for your truck. Short for Cascadia plus as your home on wheels it is a play on casa.
Alex I don't think you should get off the beaten path with your GPS you could get yourself in a bad situation.
I wouldn't go through some small towns if the road is closed I would find the nearest truck stop off i-80.
When I left the military installation I work on today there was a GP truck and trailer sitting right outside the gate.
I don’t understand why you worried about fueling with half a tank and your weights being legal. If you have a load of 39000 you can be fully fueled and still have room to work with. With a Cascadia and dry van you can haul approximately 45,000 lb load and still be under 80,000 if they load it right. Slide the tandems to make sure your drives and trailer tandems are under 34,000 and roll. Weigh stations are just making sure your total is under 80,000 and your under the 34,000 on your tandems and drives.
Remember when your fuel light comes on,you can go another 100 miles if you absolutely need to
Alex use a small Gatorade bottle next time you get a pump like that. Or maybe even a water bottle. Love the content brother. Keep em coming.
Love the content dude!
You going back through Virginia on 77again down Fancy Gap Mountain, down to Brintles Truck, be careful getting in and out of there. Godspeed from Virginia.
Love your videos man!
Slide your tandems for moving weight or slide your 5th slide
They must love their Alex
I learned from another youtuber that you can't replace just one tire. They would to replace the pair. Don't have to do them all but they have to do the pair.
Going down a hill alway keep the rpm at 1500 and use your jake to do that your in an automatic so no worry about blowing a shift
there is a 4 year old snowboarder on youtube, her dad attaches a mic to her and just lets her go and she talks to herself, sings, etc. she's super cute and really fun! This channel gives me those vibes!!! It would be so interesting to hear what your life was like as a child if you dad attached a mic to you and just let you do your thing!
Found her. Chasing Sage. Very funny. Wish I had thought of it. 👍
thats a weird comment
@@412hwc yeah, your comment is weird. Either you get it, or you don't!
You should be on a list. Actually you’re probably already on one if you’re watching videos with 4 year olds.
@@bendeleted9155 what a creep. If I knew you in public I’d add you to the list of missing pedophiles.
They seen the trailer needed more done. Its getting the season where D.O.T starts their unexpected all levels inspections and you want to keep your record clean and the company. Have a safe trip. Thanks for sharing. By the way whats the color is your truck called. Its like a blue but looks like it has a greenish tint to it ?
Awesome Video Man!
good luck for your work
Replace these things don't you know what they are. Your slack adjusters. Your S cams. That is an old trailer with drum breaks. You have to be careful In Winter time they freeze. And driving in the snow you have To be careful. And in Winter time make sure that you keep that 5th will Greece.
I went uphill in France with 580 up with 25 mls/hr... now THAT's slow!!!
Front axle temp is oil temp of front drive axle of tractor rear axle temp is oil temp of rear drive axle on tractor. Doesn't their company trucks have an engine brake? Stage two going down that hill would keep you at speed and barely use brakes. Your gross with 39000 on should have been 74 or 75000 full of fuel and def you and your stuff.
This is my youtube channel so didi you reply to this comment in whats app just making sure its you
Use your engine brake more going downhill if you use it correctly you'll barely have to tap on your service brake at all maybe get it to the speed you want
The gas cap normally will fit to hold the pump.
15:38 it’s the rear deferential oil.
Wow man this channel is inspiring me... I like to do vlogging like this man. But I don't have truck, lol.
Can’t wait to get my MC license in Australia to drive the big trucks
@@thobbs4526 yeah the road trains
Love your videos
Alex, I know good and well you’re not holding your brakes when you’re going down a mountain my guy. Be careful, you can lose your brakes if they get to hot
Yes if equipped with an engine brake (Jake Brake) he should definitely be using it down hill
@@Rev1Kev yes indeed
Alex don't use your brakes going down the mountains. Use your Jake brake
He's a new driver, he's not going to know everything immediately. Great marketing for GP Transco for sure.
He is doing a fine job my gosh Looks like he made it down, fancy gap. In regular,Virginia.🤣🤣🤣🤣Go go go .😂😂❤
Hey you ever come to South Dakota I work at a warehouse I’m a yard dog and I see a lot of GP drivers come through
Translate it to Spanish all vids and see ur views and etc. skyrocket 📈🚀🌕
I wish I could meat u I’m working for FFE currently have been watching you since before I started cdl school. Much love bro from Houston.
You mean they greased the slack tube and the slack adjuster
Alex, name your truck *"232074"* -- Oh, wait! It already has that name! (Even though you try to cover it with blue rectangles in your video editing) 😂🤣😂🤣😂🤣
Don't worry about that weight station they go after hot shots more there for some reason everytime I ride by theres always one in there getting dot inspection 😂
Stay safe Alex.
you have the coolest jackets and hoodies! :)
Hello just wanted to say I love your videos keep up the good work and be careful out there driver oh and I don't know if you're taking ideas for names but what about Frank short for Freightliner I know it doesn't match
Thats a Good Company that goes the distance
Split sleeper berth there's a tab in samsara that activates your sleeper berth...your supposed to play with samsara and get familiar with the program. It's in your settings.
Try using the engine brake to save your brakes