Thanks for the video ! The IMBZK installation went through flawlessly after watching your video. It's a fantastic protector, too. I threw away my Zagg hybrid fusion thingy. Even though it was so expensive.
I purchased the Whitestone Dome Glass with Liquid Adhesive because of this review. The instruction manual that came with is not as in-depth as this video, and I can't stress enough how much this hands-on how-to guide helped me out. Thank you. Also, I use an Otterbox Defender case, and it absolutely fits with this screen protector. I hope this comment helps whomever is going to be scouring the internet looking for the answer to the question, because I certainly did.
This the confirmation I have been looking for. I've been looking at getting the OtterBox defender case for it's protective attributes as well as the Whitestone dome glass screen protector but am worried they wouldn't be compatible. Thanks for your comment
Thank you for the video! Used to make my decision on the IMBZBK and to make sure I installed it correctly. Great video to make a decision, thanks for testing.
First timer to the channel and I must say, great video man! Thank you so much for all you did and do for ppl like me. It really helps that there are folks out there like you that are willing to do all this. You’ve got an awesome selection of screen protectors and I really appreciate all you did during the video. Definitely going to be picking up something through your links. Im leaning more towards the privacy glass screen protector, just because glass adhesive screen protectors give me anxiety, but you make me wanna try it. I’ll let you know which one I ended up going with and how it all turned out. Thanks again.
I've done a lot of research and didn't found any tempered glass that seem to be a good option.. only the really expensive whitestone. Thanks a lot for this video. Now I've ordered the IMBZBK for 30 euro.. it's expensive but better than 48 Euro(for whitestone)^^ hopefully it will work fine. I'm a mom of a 2 years old and really need the high protection for my phone 😅
I agree, the best options are going to be the ones that use liquid adhesive because of the curvature of the screen. The IMBZBK wasn’t a bad option, let me know how it works out for you when I get it on.
So well done. Thank you. My one concern buying the Pro is the curved edges and protecting it well in a case. You have shown there are solutions available.
7 Pro in the mail, never seen your channel until now but you sure as hell earned my subscription, so thorough! Picking IMBZBK glass with liquid adhesive, thank you :)
Thank you so much for all the effort you put into this video. You delivered very much useful information in a terrific format with no fluff. I understand screen protectors much better now. About the horizontal line: This is an inevitable result because these film protectors are in two parts - the top half and the bottom half. The line comes from the gap between the halves. There's only so much engineering that can go toward minimizing the gap without boosting the price unacceptably. One thing is for sure from the comments: There is no 'best' here, only what's best for you. Watching you apply the Whitestone Dome with liquid makes it seem do-able even to a klutz like me. But why couldn't they put the bridge in the center, so we don't have to entice the glue into that position?
Thanks for all the info. I went with the whitestone for my pixel 7 pro. Your video made it simple. I was so worried about putting adhesive on my phone, but it came out perfect!
Thank you so much for this!! I am going to try the Whitestone Film Hybrid. I have been using the Dome tempered glass screen protectors, but (due in large part to my physical disabilities, I'm sure) they are chipping on the edges and cracking. They're just too expensive for me to keep replacing them, plus, my screen actually got cracked while using them. Like I said, probably more my fault than theirs, but I'm going to see how I fare with the hybrid film this time. 😊 Thanks again!!
Superb video, i already ordered my IMBZBK protector (impossible to remember the acronym lol) yesterday, so i regret not being able to use your affiliate link
So what I gathered was the best glass protector would be the Whitestone dome, protects camara bar metal also. Number 2 would be IMBZBK Glass protector. Film would be AM film protector, Better Future AACL Film Protector, and Whitestone Dome UV Film Protector, in no particular order.
@@mArtinopapesso no, I would go for product 12... I don't have my P7Pro yet, but have used a similar product to IMBZBK's tempered glass for my P6Pro and the extra few dollars you pay for the Whitestone isn't worth it in my opinion
Wow! Seriously very thorough and informative! Before I found this video I bought an Arshek curved glass protector from Amazon. I dislike it--- only adheres on edges, really impairs screen sensitivity even with the right setting and it's a fingerprint magnet. I'm definitely going to buy something from a link on your site! Thank you!
I did see a very slight circle around the fingerprint sensor on the IMBZBK loca adhesive protector. If you watch closely you will see it and I am sure that is the reason for the added weighting device. I liked the leveling bubble on the guide also. I also noticed that the gap between the edges of the protector on the top and bottom appears to be narrower than it is on the Whitestone loca adhesive protector. I like that there are no circles to be seen over the fingerprint sensor on the Whitestone either. The Whitestone procedure of having to push down, and or lift up to make the loca move to the center seems very, very bad IMO. The bridge should drop the loca in the middle if you have to do that! Too much room for error. So then IMO the IMBZK has a better installation routine with a better guide and three protectors, and a narrower gap top and bottom, with a barely visible circle over the fingerprint sensor. The Whitestone has a harder installation method, larger gaps top and bottom, no circle around the fingerprint sensor and only two protectors in the package. To me the only down side of the IMBZBK protector is the barely visible circle over the fingerprint sensor. So even though I have the Whitestone on order (SMH) I give the IMBZBK protector the WIN over the Whitestone! One other thing that is better on the Whitestone, and the main reason I went with it over the IMBZBK protector is the CLEAR camera bump film protector. Those black glass ones are stupid unless you have the Obsidian color phone. Clear is the way to go!
Nice feedback, thanks!! IMBZBK definitely has the better installation. I kind of like the idea that the Whitestone has a little more gap.... that way more cases fit the device easier. I went with Whitestone, but hate that it's not releasing till Oct 31st. Luckily i found a code that gave me 20% off, so $31 total for 2 lifetime screen protectors isn't' horrible.
I just installed this one on my pixel 7 Pro. So far so good. Be sure to slide the glass protector up before using the UV light to better align it to the screen.
When I installed mine it just sped up the wait time of the liquid to the sides, I think they cover the fingerprint area to protect it while installing and double down by having you use the weight at that location that's protected and simultaneously making the adhesive as thin as possible at the fingerprint sensor to ensure it has minimal impact on the sensor itself. I can confirm my install went seamlessly and it's the best screen protector I've ever owned.
Looks like the only real option is to go with the ones that require adhesive, the others all seem fairly atrocious, I've gone through two sets of protector already and found my way to this video, thanks! (first one is a glass one with the ugly circle hole, couldn't take it, second one was a TPU one which scratches if you looked at it too hard).
First time I used the Whitestone dome screen protector was on my pixel 7 pro. If the protector edges weren't there, you'd honestly never know it was there. It feels almost exactly the same as the stock glass.
Thank you! Thank you! Thank you! This is one of the most helpful TH-cam videos I've seen in a very long time. Great job and thank you for all the time and effort you invested into it.
Thanks for the video! Just installed the LYWHL film for my pixel 7 pro. Was worried about getting the line in the middle but I actually didn't get the line in the middle of the screen which is great for $8. Maybe i got lucky and got a better QC screen from LYWHL. What did end up happening was a singular......singular!!!! piece of lint got stuck under the screen. Again, $8 bucks is worth it. I messed up the first screen because I wanted to see the fitment and didnt read the instruction or rewatched your video and the center green part stuck to the screen misaligned. Just and extra FYI i did install the second screen in the bathroom after streaming it up to prevent as much dust/lints possible.
That’s great to hear about no lines Poi, it’s usually my luck to get a tiny piece of dust as well. Thank you for the tip, I’ll have to try that myself sometime. Thank you for your support as well.
Was disappointed that there was no Spigen glass option. I contacted them ands they said they have no plans for it because of the curved shape. I ended up with Panzerglass which is expensive, and you only get one, but it does seem to work well. It too has a circular section for the fingerprint reader (one of the reasons I don't like in screen fingerprint readers), but I've yet to see a glass one which doesn't have that circular section. You seem to have greater choice than we do in the UK. Can't say I fancy the hassle of the UV curing liquid ones but they don't seem to have the fingerprint cutout which is nice.
@@josephseman5333 yes I did say that in my comment, but I'm not really keen on the hassle of having to have a special light bar to cure some glue which will then sit around gathering dust. It's a pretty wasteful system.
I just bought and received the LYWHL screen protector today. Went ahead and just installed it about 7mins ago. I didnt read the instructions. Just basically followed along with the video when he installed it. Installation went mostly smoothly. I only have one very tiny bubble towards the middle top of my phone. I think its because i probably didn't put slightly more pressure on it. Though the instructions and some of the Amazon review said to give it about 24-48hrs and the bubbles will work itself out. Even if it doesn't I'd still give this a 4.5/5 for the very simple installation and smooth feeling. Also I DO NOT have that faint line that is mentioned in the video. I actually thought i might which wouldn't have been a big deal. But its actually not on my installation AT ALL which is just a bigger plus. The protector feels very smooth almost like temper glass. I put my poetic case on it and had no issue, though i'm planning to switch to a encased phonecase in two days. Will try to update on the tiny bubble situation. Overall.. definitely recommend it. Plus its very cheap and i have a second screen protector if the bubbles annoy me :) UPDATE: Bubble went away in a few hours. So the installation went perfect. I did notice the screen is smooth but not like temper glass as I originally thought. It has a slight film feeling to it. Though I can still type normally. I'd say this is 10/10 for film protectors
Just installed my LYWHL too. I was lucky enough not to have any bubbles at all. I have an extremely faint line, but I need to hold the phone up to a light at the right angle with the screen turned off and spend 5 seconds tilting the phone back and forth with one eye closed to find it. I had a pack of two and wasted one because of my own misunderstanding of the application steps. I thoroughly cleaned the screen with the provided wipes and second attempt went great.
@@dhillaz mine didn't have the line but I think it's depending on how you start the process and how hard you use the squeegee. Also the bubble went away in like a few hours
Got the Supershieldz ones myself and they're perfectly fine. Was surprised they fit my Otterbox Defender Pro when the Zagg one I got at Best Buy popped it right out. And it's actual glass so it'll actually protect the display. Tempered glass is meant to act like Kevlar so when it breaks, you peel it off and get another one. Film doesn't do this. I would have gone with Whitedome but far too expensive and heard it's not compatible with some cases. (Otterbox is one of them)
Just got a pixel 7 pro (there was a massive discount from mint mobile). So basically the options are (because of the curved glass?) film with adhesive, tempered glass with a small amount of adhesive on the edges and the weird fingerprint cutout, and tempered glass with liquid curing? I don’t know if I should even use a screen protector. Film seems basically worthless to me as it’ll scratch/scuff up really easily (it’s plastic, so way more things will affect the surface compared to glass). The tempered glass with the little adhesive on the edges seem terrible. And the whole liquid glue curing process is such a hassle and far beyond what I’m comfortable with. I think I’ll be avoiding curved glass displays in the future.
Not everyone might need one. Id even take just the camera protector. I'm keeping the options in my back pocket and saving them only in case i feel i need one. I would get one for sure though if you're always in an a environment where you have the possibility for getting scratches or breaking the screen. Other wise alot of people go without. My pixel 5a 5g died on me, but before i sent it in, it had just a couple tiny scratches in the screen. small as a mouse, can't even tell its there unless you look straight at the phone and focus. Never had a screen protector for that one for the just over a year of it working. This is my replacement for it. Praying this one works unlike the 5a 😂
59:04 If it's going perfectly and spreading across the screen then don't touch it but if it looks like the liquid isn't reaching right across the screen then don't be afraid to lift up the plastic phone holder to encourage it to spread out more and if it's starting to harden and still won't go try encouraging it with a squeegy or the plastic black guide to get it to spread right across. If you fail the first installation, use alcohol whipes or alcoholic/anti bacterial liquid to loosen the hardened/jellified liquid off of the screen protector to be able to completely get it back to square 1 and try again with another liquid vile so you don't waste a screen protector. I messed up the installation first time then the second time the liquid still looked like it wasn't going to spread properly so i just said screw it, and picked the plastic holder up at one end and used the black sliding tool to encourage the liquid to the edges and it ended up fitting perfectly. Now that it's on, the screen protector is awesome but definitely watch the guide video a few times through before starting and don't be afraid to get hands on if the liquid isn't spreading across the screen properly.
Whitestone is the best one and perfect fit if you’re patient. The only guide I found how to fit the camera protector at the back too which is actually more fiddly than the screen protector lol
I have the Tocol, #8. The lines and Orange Peel effects disappear quickly as did the rubbery feeling but there is some peeling along one side that I have to repeatedly smooth back down
Thank you for this video... I've used Skinomi screen protectors in the past and never had a problem. I thought I was doing something wrong with this one since the sides would not stay down.
Wife and I also have Skinomi protectors. Problem I had was repositioning them and having to reapply the liquid. Eventually, it weakens whatever adhesive is on the sides and they won't stay down at all. You really need to be lucky, get it done in one go, and let it dry a bit before applying the sides. Even then... its a lot of effort. Was much easier on my flat P6 than it was on P7P.
Great review and presentation. Thank you. The AACL looks the best to me, in my opinion. Obviously, the tempered glass protectors are the best when it comes to protecting. But I've ruined too many installations, from unleveled surfaces to soft drops. It's simply too much work for the reward. The hybrid seems like a good compromise.
@@kuztardd That is a good point. But I'm assuming (maybe wrongfully so) that the line disappears over time. At least, that has been my experience when dealing with high quality TPM protectors. If the line stays, then my vote is out. I bought the AACL and will be giving it a try shortly. I'll update my comment with results.
@@franciss.fernandez7581 I'd appreciate some feedback on this too. Although TG is the best, the installation process is not guaranteed to be the best in my case and would rather go for the hybrid feel. AACL is what I want to go for but I'm not too sure about the horizontal line.
@@xalmak I'm installing the AACL today. I'll follow here and let you know. It'll probably be a day or two before I can tell if the "line" remains or disappears after a while.
The for you what is the best of the best? And what is the best like tempered glass? I dont care the finger scanner. I only want the best screen protector with the best sensibility. Tks
This is a great video and I used it to put the protector onto my phone last month! However, last night I dropped my phone and cracked the tempured glass. This morning when I went to take it off and replace it, a massive section in the shape of an oval is stuck to the screen. I got the glass off but the glue is still stuck. How did you get the adhesive off your phone screen once this video was completed??
Great reviews. In regards to the Dome Glass (the one at the end, not the film), was there any issue with the liquid getting under the glass where the camera was? Didnt see you have to wipe around there so I was curious. Thank you!
I’m looking for a USB-C splitter for my Pixel 7 Pro that can connect to its USB-C port. The splitter should have two female USB-C portss: one for connecting USB-C Apple EaarPods to make phone calls, and the other for charging the phone and supporting data transfer. This data transfer should enable USB debugging mode, allowing me to use the mirroring application, scrcpy. I’ve noticedd that most products on Amazon only support data transfer on the port that supports audio, but not on the charging port. Can you recommend a product that meets these requirements?
That is an option for sure , I just wish they made the protector for use without the liquid. It just makes the installation more difficult than it should be.
@HighTechCheck I thought we were supposed to put 2 guide stickers on the left hand side of the screen protector and then without peeling the screen protector plastic; position the screen protector to the phone. Stick the 2 guide stickers to the phone. Once it's taped on the phone and screen protector open it like a book and peel the back plastic on screen protector and drop the screen protector to phone.
When you use the phone with the white stone dome glass screen protector do you find your finger rubbing against the edge of the glass and if so do you find that annoying?
I have a pixel 7 pro and I'm wondering why you don't talk about the second most important issue with these screen protectors - image quality. Because of the curved glass, most of these screen protectors don't have full screen adhesion to the screen. You did mention that this results in low adhesion but the horrible image quality you get when you don't have full adhesion makes any screen protector without full adhesion and automatic no for me. The air gap between the screen protector and the screen causes internal reflections which ruin image quality.
I got the IMBZBK which has got to be the worst name in history. Applied it today, very happy except wish the back protector was clear. Works with my Spigen Clear bumper slim case. Highly recommended, looks great works excellent.
I think you should have made the Whitestone install a video on its own. More views for you! That camera cover, how the F did you figure that out!!?? I made a f'ing mess of mine. Baffling installation on that. I appreciate watching you after I made a mess of mine, although mine is on but with bubbles.
I love how all these have the exact same instructions and installation kits. Seems like the same chinese stuff branded and boxed differently. I'm gonna pick up the LYWHL film protector (#4) from your link. I've tried the Whitestone on my S21 Ultra and although it provides good protection, the second you get a crack on the edges you're done. It cracks and spreads because even though it's glass it is very thin.
In my experience the SuperShieldz Tempered Glass are horrible. I tried both in my pack & both came loose within a day and affected touch. I got the thinner ones without the fingerprint circle. 2nd one cracked in under an hour in my pocket with nothing else in my pocket. I'm currently using a knock-off brand of the WhiteStone liquid adhesive which seems to work great and is scratch resistant to my steel marking scratch awl which is hardened tool steel.
I love that you included purchase links in the description matching the chapters, makes it easier compare current prices to get the best value.
Thanks for the video ! The IMBZK installation went through flawlessly after watching your video. It's a fantastic protector, too. I threw away my Zagg hybrid fusion thingy. Even though it was so expensive.
I purchased the Whitestone Dome Glass with Liquid Adhesive because of this review. The instruction manual that came with is not as in-depth as this video, and I can't stress enough how much this hands-on how-to guide helped me out. Thank you.
Also, I use an Otterbox Defender case, and it absolutely fits with this screen protector. I hope this comment helps whomever is going to be scouring the internet looking for the answer to the question, because I certainly did.
This the confirmation I have been looking for. I've been looking at getting the OtterBox defender case for it's protective attributes as well as the Whitestone dome glass screen protector but am worried they wouldn't be compatible. Thanks for your comment
@@OzzCyrus1:08 1:10
this is the exact answer I was looking for, thank you.
By far the best reviews on screen protectors, thanks for taking the time and doing this. Saved me a bunch of money and time buying random ones to try.
Thank you for the video! Used to make my decision on the IMBZBK and to make sure I installed it correctly. Great video to make a decision, thanks for testing.
You're welcome! Thank you for your support 😁
First timer to the channel and I must say, great video man! Thank you so much for all you did and do for ppl like me. It really helps that there are folks out there like you that are willing to do all this. You’ve got an awesome selection of screen protectors and I really appreciate all you did during the video. Definitely going to be picking up something through your links. Im leaning more towards the privacy glass screen protector, just because glass adhesive screen protectors give me anxiety, but you make me wanna try it. I’ll let you know which one I ended up going with and how it all turned out. Thanks again.
Just tell us which one to get cmon mann
Make up your own mind man, that's the point
@@philh36ify1h
😂
The answer is the IMBZBK protector he just forgot to say.
I've done a lot of research and didn't found any tempered glass that seem to be a good option.. only the really expensive whitestone. Thanks a lot for this video. Now I've ordered the IMBZBK for 30 euro.. it's expensive but better than 48 Euro(for whitestone)^^ hopefully it will work fine. I'm a mom of a 2 years old and really need the high protection for my phone 😅
I agree, the best options are going to be the ones that use liquid adhesive because of the curvature of the screen. The IMBZBK wasn’t a bad option, let me know how it works out for you when I get it on.
I got the Whitestone Premium Glass and followed your video step-by-step to install it! It looks wonderful, thanks so much!! ❤️
I’m glad to hear you had a great experience with the install, thank you for your support!
So well done. Thank you. My one concern buying the Pro is the curved edges and protecting it well in a case. You have shown there are solutions available.
I had the same concern when I first got a phone with curved edges, the glass with liquid adhesive is definitely the way to go.
7 Pro in the mail, never seen your channel until now but you sure as hell earned my subscription, so thorough! Picking IMBZBK glass with liquid adhesive, thank you :)
Thank you for your support Joshua, I hope you enjoy your new phone. I love mine.
You sir are a legend. Thanks so much for taking the time to make this video - much appreciated! 🙌🙌🙌
Thank you for your support Greg! I appreciate you.
Thank you so much for all the effort you put into this video. You delivered very much useful information in a terrific format with no fluff. I understand screen protectors much better now.
About the horizontal line: This is an inevitable result because these film protectors are in two parts - the top half and the bottom half. The line comes from the gap between the halves. There's only so much engineering that can go toward minimizing the gap without boosting the price unacceptably.
One thing is for sure from the comments: There is no 'best' here, only what's best for you. Watching you apply the Whitestone Dome with liquid makes it seem do-able even to a klutz like me. But why couldn't they put the bridge in the center, so we don't have to entice the glue into that position?
Thanks for all the info. I went with the whitestone for my pixel 7 pro. Your video made it simple. I was so worried about putting adhesive on my phone, but it came out perfect!
Thank you so much for this!! I am going to try the Whitestone Film Hybrid. I have been using the Dome tempered glass screen protectors, but (due in large part to my physical disabilities, I'm sure) they are chipping on the edges and cracking. They're just too expensive for me to keep replacing them, plus, my screen actually got cracked while using them. Like I said, probably more my fault than theirs, but I'm going to see how I fare with the hybrid film this time. 😊 Thanks again!!
I bought the dome glass and it's perfect!
No bubbles or stripes and it feels good.
Your installation guide really made it easy to install
Thank you! Awesome video exactly what I needed!!! Keep em coming!
Thank you for the reviews ! I do wish you would have done a recap at the end on the best ones.
agreed quick summary of each at the end and if it was thumbs up or down
Superb video, i already ordered my IMBZBK protector (impossible to remember the acronym lol) yesterday, so i regret not being able to use your affiliate link
So what I gathered was the best glass protector would be the Whitestone dome, protects camara bar metal also. Number 2 would be IMBZBK Glass protector. Film would be AM film protector, Better Future AACL Film Protector, and Whitestone Dome UV Film Protector, in no particular order.
the winner is number 10?
really? i would put the IMBZBK Glass protector as #1 with the bumpers and a UV light that covers the entire device in one shot
@@dimm0k do you say you buy product 5 and product 10?
The product 10 you say to buy it for the UV light?
@@mArtinopapesso no, I would go for product 12... I don't have my P7Pro yet, but have used a similar product to IMBZBK's tempered glass for my P6Pro and the extra few dollars you pay for the Whitestone isn't worth it in my opinion
@@dimm0k HI,Is 12 the best product for you,please?
I use whitestone dome for every phone I get. Love it
Wow! Seriously very thorough and informative! Before I found this video I bought an Arshek curved glass protector from Amazon. I dislike it--- only adheres on edges, really impairs screen sensitivity even with the right setting and it's a fingerprint magnet. I'm definitely going to buy something from a link on your site! Thank you!
I did see a very slight circle around the fingerprint sensor on the IMBZBK loca adhesive protector. If you watch closely you will see it and I am sure that is the reason for the added weighting device. I liked the leveling bubble on the guide also. I also noticed that the gap between the edges of the protector on the top and bottom appears to be narrower than it is on the Whitestone loca adhesive protector. I like that there are no circles to be seen over the fingerprint sensor on the Whitestone either. The Whitestone procedure of having to push down, and or lift up to make the loca move to the center seems very, very bad IMO. The bridge should drop the loca in the middle if you have to do that! Too much room for error. So then IMO the IMBZK has a better installation routine with a better guide and three protectors, and a narrower gap top and bottom, with a barely visible circle over the fingerprint sensor. The Whitestone has a harder installation method, larger gaps top and bottom, no circle around the fingerprint sensor and only two protectors in the package. To me the only down side of the IMBZBK protector is the barely visible circle over the fingerprint sensor. So even though I have the Whitestone on order (SMH) I give the IMBZBK protector the WIN over the Whitestone! One other thing that is better on the Whitestone, and the main reason I went with it over the IMBZBK protector is the CLEAR camera bump film protector. Those black glass ones are stupid unless you have the Obsidian color phone. Clear is the way to go!
Nice feedback, thanks!! IMBZBK definitely has the better installation. I kind of like the idea that the Whitestone has a little more gap.... that way more cases fit the device easier. I went with Whitestone, but hate that it's not releasing till Oct 31st. Luckily i found a code that gave me 20% off, so $31 total for 2 lifetime screen protectors isn't' horrible.
I just installed this one on my pixel 7 Pro. So far so good. Be sure to slide the glass protector up before using the UV light to better align it to the screen.
There is no hole for the front facing camera. You don't have an issue with that? I do.
When I installed mine it just sped up the wait time of the liquid to the sides, I think they cover the fingerprint area to protect it while installing and double down by having you use the weight at that location that's protected and simultaneously making the adhesive as thin as possible at the fingerprint sensor to ensure it has minimal impact on the sensor itself. I can confirm my install went seamlessly and it's the best screen protector I've ever owned.
@@rjsoderlund81 did your IMBZBK have the circle around the fingerprint reader?
Looks like the only real option is to go with the ones that require adhesive, the others all seem fairly atrocious, I've gone through two sets of protector already and found my way to this video, thanks! (first one is a glass one with the ugly circle hole, couldn't take it, second one was a TPU one which scratches if you looked at it too hard).
Which one did you end up going with, and how do you like it?
First time I used the Whitestone dome screen protector was on my pixel 7 pro. If the protector edges weren't there, you'd honestly never know it was there. It feels almost exactly the same as the stock glass.
Are You talking about the UV protector or the adhesive one?
@@similette uv
@@_Davepocalypse thx!
Thank you! Thank you! Thank you! This is one of the most helpful TH-cam videos I've seen in a very long time. Great job and thank you for all the time and effort you invested into it.
Thanks for the video! Just installed the LYWHL film for my pixel 7 pro. Was worried about getting the line in the middle but I actually didn't get the line in the middle of the screen which is great for $8. Maybe i got lucky and got a better QC screen from LYWHL. What did end up happening was a singular......singular!!!! piece of lint got stuck under the screen. Again, $8 bucks is worth it. I messed up the first screen because I wanted to see the fitment and didnt read the instruction or rewatched your video and the center green part stuck to the screen misaligned. Just and extra FYI i did install the second screen in the bathroom after streaming it up to prevent as much dust/lints possible.
That’s great to hear about no lines Poi, it’s usually my luck to get a tiny piece of dust as well. Thank you for the tip, I’ll have to try that myself sometime. Thank you for your support as well.
This is exactly what I was looking for. Thanks....extremely helpful.
Curved screen designs need to go away. Whoever thought it's a good idea still needs to be immediately fired
Great Video. Used your link to buy the IMBZBK glass with liquid adhesive
Thanks for putting this video together. I especially liked that you showed how to remove the protectors. Very well done, helpful and informative.
Was disappointed that there was no Spigen glass option. I contacted them ands they said they have no plans for it because of the curved shape. I ended up with Panzerglass which is expensive, and you only get one, but it does seem to work well. It too has a circular section for the fingerprint reader (one of the reasons I don't like in screen fingerprint readers), but I've yet to see a glass one which doesn't have that circular section. You seem to have greater choice than we do in the UK. Can't say I fancy the hassle of the UV curing liquid ones but they don't seem to have the fingerprint cutout which is nice.
The Whitestone does NOT have any circle section for the FP sensor.
@@josephseman5333 yes I did say that in my comment, but I'm not really keen on the hassle of having to have a special light bar to cure some glue which will then sit around gathering dust. It's a pretty wasteful system.
@@stevepettifer4896 I think it comes with it, you don’t have to buy one.
I have Caseology (Spigen sister company) for pixel 7 and sadly, fingerprint don`t work most of the times.
@@stevepettifer4896 Lmao...you reuse it for when you reapply it. It comes in a 2 or 3 pack
I just bought and received the LYWHL screen protector today. Went ahead and just installed it about 7mins ago. I didnt read the instructions. Just basically followed along with the video when he installed it. Installation went mostly smoothly. I only have one very tiny bubble towards the middle top of my phone. I think its because i probably didn't put slightly more pressure on it. Though the instructions and some of the Amazon review said to give it about 24-48hrs and the bubbles will work itself out. Even if it doesn't I'd still give this a 4.5/5 for the very simple installation and smooth feeling. Also I DO NOT have that faint line that is mentioned in the video. I actually thought i might which wouldn't have been a big deal. But its actually not on my installation AT ALL which is just a bigger plus. The protector feels very smooth almost like temper glass. I put my poetic case on it and had no issue, though i'm planning to switch to a encased phonecase in two days. Will try to update on the tiny bubble situation. Overall.. definitely recommend it. Plus its very cheap and i have a second screen protector if the bubbles annoy me :)
UPDATE: Bubble went away in a few hours. So the installation went perfect. I did notice the screen is smooth but not like temper glass as I originally thought. It has a slight film feeling to it. Though I can still type normally. I'd say this is 10/10 for film protectors
Just installed my LYWHL too. I was lucky enough not to have any bubbles at all. I have an extremely faint line, but I need to hold the phone up to a light at the right angle with the screen turned off and spend 5 seconds tilting the phone back and forth with one eye closed to find it.
I had a pack of two and wasted one because of my own misunderstanding of the application steps. I thoroughly cleaned the screen with the provided wipes and second attempt went great.
@@dhillaz mine didn't have the line but I think it's depending on how you start the process and how hard you use the squeegee. Also the bubble went away in like a few hours
42:08 you need to treat those like you would window tint. A hairdryer on low setting should help the edges to cure faster and easier.
I have the PIxel 7...do you have recommendations for that phone? This video was very well done. Thank you for all you do!
great video. all i wanted before buying uv light liquid tempered glasses is how easy to remove them in case it cracks.
Got the Supershieldz ones myself and they're perfectly fine. Was surprised they fit my Otterbox Defender Pro when the Zagg one I got at Best Buy popped it right out.
And it's actual glass so it'll actually protect the display. Tempered glass is meant to act like Kevlar so when it breaks, you peel it off and get another one. Film doesn't do this.
I would have gone with Whitedome but far too expensive and heard it's not compatible with some cases. (Otterbox is one of them)
So , which is the best to use it with Otterbox Defender pro?
Just got a pixel 7 pro (there was a massive discount from mint mobile). So basically the options are (because of the curved glass?) film with adhesive, tempered glass with a small amount of adhesive on the edges and the weird fingerprint cutout, and tempered glass with liquid curing?
I don’t know if I should even use a screen protector. Film seems basically worthless to me as it’ll scratch/scuff up really easily (it’s plastic, so way more things will affect the surface compared to glass). The tempered glass with the little adhesive on the edges seem terrible. And the whole liquid glue curing process is such a hassle and far beyond what I’m comfortable with.
I think I’ll be avoiding curved glass displays in the future.
Not everyone might need one. Id even take just the camera protector. I'm keeping the options in my back pocket and saving them only in case i feel i need one. I would get one for sure though if you're always in an a environment where you have the possibility for getting scratches or breaking the screen. Other wise alot of people go without. My pixel 5a 5g died on me, but before i sent it in, it had just a couple tiny scratches in the screen. small as a mouse, can't even tell its there unless you look straight at the phone and focus. Never had a screen protector for that one for the just over a year of it working. This is my replacement for it. Praying this one works unlike the 5a 😂
With the AACL film you can use the squeegee after the curing to make the line even less visible.
Thank you for this video Im getting a p7p soon and needed this video :)
Am I the only one who was waiting for him to use the Moh's hardness picks on one of the film protectors? 😂
Very good video! Just what i wanted. Thanks :)
59:04 If it's going perfectly and spreading across the screen then don't touch it but if it looks like the liquid isn't reaching right across the screen then don't be afraid to lift up the plastic phone holder to encourage it to spread out more and if it's starting to harden and still won't go try encouraging it with a squeegy or the plastic black guide to get it to spread right across. If you fail the first installation, use alcohol whipes or alcoholic/anti bacterial liquid to loosen the hardened/jellified liquid off of the screen protector to be able to completely get it back to square 1 and try again with another liquid vile so you don't waste a screen protector. I messed up the installation first time then the second time the liquid still looked like it wasn't going to spread properly so i just said screw it, and picked the plastic holder up at one end and used the black sliding tool to encourage the liquid to the edges and it ended up fitting perfectly. Now that it's on, the screen protector is awesome but definitely watch the guide video a few times through before starting and don't be afraid to get hands on if the liquid isn't spreading across the screen properly.
Definitely looking for one to fit the OtterBox Defender. Anyone have an opinion outside of the supershieldz?
That USB plug guide is brilliant, they should all come with that.
Thanks for doing this but you really need to have a conclusion. Which do you recommend in the various categories?
Whitestone is the best one and perfect fit if you’re patient. The only guide I found how to fit the camera protector at the back too which is actually more fiddly than the screen protector lol
Thanks for the helpful video! Cases soon?
I do have some case videos coming, I don’t know if I’ll have enough to do a best and worst though. Thank you for your support!
Spigen
This is amazing video with a lot of great helpful works very you.
I have the Tocol, #8. The lines and Orange Peel effects disappear quickly as did the rubbery feeling but there is some peeling along one side that I have to repeatedly smooth back down
Thank you for this video...
I've used Skinomi screen protectors in the past and never had a problem.
I thought I was doing something wrong with this one since the sides would not stay down.
Wife and I also have Skinomi protectors. Problem I had was repositioning them and having to reapply the liquid. Eventually, it weakens whatever adhesive is on the sides and they won't stay down at all. You really need to be lucky, get it done in one go, and let it dry a bit before applying the sides. Even then... its a lot of effort. Was much easier on my flat P6 than it was on P7P.
Amazing video, thank you!
Wish I'd have seen this before going through four protectors that the fingerprint pad didn't work with. 🙄 Now I know exactly what to order!
Great review and presentation. Thank you. The AACL looks the best to me, in my opinion. Obviously, the tempered glass protectors are the best when it comes to protecting. But I've ruined too many installations, from unleveled surfaces to soft drops. It's simply too much work for the reward. The hybrid seems like a good compromise.
"AACL looks the best"... are you sure you'd be happy to have that line in the middle of your screen?
@@kuztardd That is a good point. But I'm assuming (maybe wrongfully so) that the line disappears over time. At least, that has been my experience when dealing with high quality TPM protectors. If the line stays, then my vote is out. I bought the AACL and will be giving it a try shortly. I'll update my comment with results.
@@franciss.fernandez7581 I'd appreciate some feedback on this too. Although TG is the best, the installation process is not guaranteed to be the best in my case and would rather go for the hybrid feel. AACL is what I want to go for but I'm not too sure about the horizontal line.
@@xalmak I'm installing the AACL today. I'll follow here and let you know. It'll probably be a day or two before I can tell if the "line" remains or disappears after a while.
@@franciss.fernandez7581 Thank you so much, I really appreciate it.
Hello, Which is best for the Matte Finish? I try the spigen neoflax but its glossy finish. Thank you for the video.
The for you what is the best of the best? And what is the best like tempered glass? I dont care the finger scanner. I only want the best screen protector with the best sensibility. Tks
This is a great video and I used it to put the protector onto my phone last month!
However, last night I dropped my phone and cracked the tempured glass. This morning when I went to take it off and replace it, a massive section in the shape of an oval is stuck to the screen. I got the glass off but the glue is still stuck.
How did you get the adhesive off your phone screen once this video was completed??
Great reviews. In regards to the Dome Glass (the one at the end, not the film), was there any issue with the liquid getting under the glass where the camera was? Didnt see you have to wipe around there so I was curious. Thank you!
They literally give you stickers to cover all the holes
Thanks for the review.
But I have to ask are you working in a clean room?
For film protectors, do the bubbles go away after 24 to 48 hours?
What case are you using?
It's wise to re do your fingerprints on the phone, after applying a screen protector.
Infact, it's logical...
Thanks for the Video
I’m looking for a USB-C splitter for my Pixel 7 Pro that can connect to its USB-C port. The splitter should have two female USB-C portss: one for connecting USB-C Apple EaarPods to make phone calls, and the other for charging the phone and supporting data transfer. This data transfer should enable USB debugging mode, allowing me to use the mirroring application, scrcpy. I’ve noticedd that most products on Amazon only support data transfer on the port that supports audio, but not on the charging port. Can you recommend a product that meets these requirements?
For the matte skins... I read from a guy that used a blow dryer to dry the film for the curved edges.
That is an option for sure , I just wish they made the protector for use without the liquid. It just makes the installation more difficult than it should be.
@@HighTechCheck agreed
@HighTechCheck I thought we were supposed to put 2 guide stickers on the left hand side of the screen protector and then without peeling the screen protector plastic; position the screen protector to the phone. Stick the 2 guide stickers to the phone. Once it's taped on the phone and screen protector open it like a book and peel the back plastic on screen protector and drop the screen protector to phone.
When you use the phone with the white stone dome glass screen protector do you find your finger rubbing against the edge of the glass and if so do you find that annoying?
I have a pixel 7 pro and I'm wondering why you don't talk about the second most important issue with these screen protectors - image quality. Because of the curved glass, most of these screen protectors don't have full screen adhesion to the screen. You did mention that this results in low adhesion but the horrible image quality you get when you don't have full adhesion makes any screen protector without full adhesion and automatic no for me. The air gap between the screen protector and the screen causes internal reflections which ruin image quality.
Sir please let me know how did you get the pitch black theme on your device. Because usually we do have a DARK theme instead of pure BLACK
Thanks for sharing
I got the IMBZBK which has got to be the worst name in history. Applied it today, very happy except wish the back protector was clear. Works with my Spigen Clear bumper slim case. Highly recommended, looks great works excellent.
How was the removal of the glass screen protector of the imzdbz? Did it left residue on the screen or was it difficult to remove the glue or residue?
No residue, easy to remove once you don't bite your finger nails 😅
All the amfilm type protectors are the same. They're all over amazon. Very satisfied with mine.
Would any know if the OtterBox Defender Series works with the IMBZBK glass and/or the Whitestone Dome Glass?
Why does this feel like such a stressful decision?!?!? I still don't know what option to go with :(
what case are you using?
I think you should have made the Whitestone install a video on its own. More views for you! That camera cover, how the F did you figure that out!!?? I made a f'ing mess of mine. Baffling installation on that. I appreciate watching you after I made a mess of mine, although mine is on but with bubbles.
IMBZBK glass with liquid adhesive one working great for me.
Can you drop the adhesive in the center without using the bridge on the whitedome? It seems more logical than playing the sliding game...
Which one have the smallest gap on the sides?
What case are you using
what caso do you use?
I love how all these have the exact same instructions and installation kits. Seems like the same chinese stuff branded and boxed differently. I'm gonna pick up the LYWHL film protector (#4) from your link. I've tried the Whitestone on my S21 Ultra and although it provides good protection, the second you get a crack on the edges you're done. It cracks and spreads because even though it's glass it is very thin.
I have the Whitestone Glass, why don't they put the bridge in the center? I had a little trouble with the puddle going past the center.... oye
So isn't the liquid uv method too much hassle and expense for something that will break and just cash weak?
Which do you recommend for a spigen tough armor ? I have a pixel 7 not pro so liquid versions are not available except really expensive whitestone...
Hmmmm if you don’t care about not having glass I might suggest the Whitestone UV gen film
that is too expensive $39.99 CAD
Can you do a video for the best and worst cases for Pixel 7/7 pro?
IMBZB link for liquid screen protector is no longer available; is there an updated link?
In my experience the SuperShieldz Tempered Glass are horrible. I tried both in my pack & both came loose within a day and affected touch. I got the thinner ones without the fingerprint circle. 2nd one cracked in under an hour in my pocket with nothing else in my pocket. I'm currently using a knock-off brand of the WhiteStone liquid adhesive which seems to work great and is scratch resistant to my steel marking scratch awl which is hardened tool steel.
I like the last one because of the camera protector
Does the IMBZBK affects the front camera since it doesn't have any camera cutout?
No, no issues with the FFC. I've had one installed since November
Do you know magsafe case for 7pro?
Mous and Moment are boring
very nice video
I refuse to think curing the hybrid film would make any difference whatsoever from the classic film protector.
I've tried the liquid method I bought one off Amazon and the glue got inside the ear piece 🙄 so I just stuck with film from armor suit
Could you please share your 'flash' wallpaper?
There are a bunch of glass screen protectors that are less than $10 on Amazon. Some of them are probably decent I would assume.
Not with an in screen finger print sensor
Any suggestions for a privacy screen that accepts finger prints
Were you able to find a good privacy protector? The IMBZBK had poor reviews on amazon, didn’t seem to be reliable
does the middle line disappear after a few days?
Whitestone is my favorite