How to fix a microwave that keeps blowing fuse even after changing the door switches
ฝัง
- เผยแพร่เมื่อ 9 มี.ค. 2023
- Link to switch assembly Check this out! a.co/d/3oQZUPj. Link to normally closed switch Check this out! a.co/d/0IeN4PO.
- แนวปฏิบัติและการใช้ชีวิต
Was not my issue unfortunately. I have the same model. I watched this great tutorial and bought both the switches and black holder together not to have to do the work twice. I tested and retested the switches while in place for proper opening / closing with the door open and closed. All was find. I plugged it in , turned it on, fuse blow in split second. Oh well. it is 14 years old. guess it is time for new one. Thanks again for this video and update.
Thanks Much for this really good video!! I was relieved there is a chance we don’t have to by a new microwave!!
i FINALLY FOUND A VIDEO THAT EXPLAINS THE SWITCH DIFFERENCES ABOUT OPEN AND CLOSED. i LOOKED AT AT LEAST 6 OR 8 VIDEOS THANKS FOR THE COMPLETE VIDEO
Where I have the same question
Just disconnect the middle switch and leave it unconnected to the switch. You will still have the other two switches for safety. This is bypassing the blown fuse.
Great video on this most common problem. In my case, the switch holder was slightly moving and making one switch break contact if you gently pulled on the door, blowing the fuse since the other two switches were still made. If you notice on the switch holder piece, there is a place for a third screw by the lower switch. I added a screw here and it took out the excess play and now works as intended. It sure looks like it was made for a third screw as the case has the hole also, GE just cut corners and left it out.
Thanks for the tips. Support the channel by subscribing.
Thanks a lot for the tip. I changed the door switch but I guess one of the wiring got mixed up as it keeps on blowing a fuse.
thank you!
In 2023 Not 27.00 anymore more like 72.00
Inflation sucks 😢.
It's showing $23 for me on amazon rn?