The Easy Way - Motorcycle Engine Installed - CRF300L
ฝัง
- เผยแพร่เมื่อ 28 ก.ค. 2024
- Install an Engine The Easy WAY! Fresh paint, fresh powder coat, we need to do this easy. The CRF300L (now XR301) is coming along. The big bore, ported head, and race cams are in and the motor is ready to go back in the frame. Is this over the top for a simple CRF300L? Who cares, this is fun!
OEM Parts - imp.i104546.net/Y9gKxm
Patron / thegardensnake
Merchandise www.jakethegardensnake.com
Rumble rumble.com/c/c-1996342
TH-cam / @thegardensnake
Twitter #!/thegardensnake
My Gear,
Helmet imp.i104546.net/doRPNy
Jacket imp.i104546.net/Xxjxg4
Gloves imp.i104546.net/MXEJ7n
Pants imp.i104546.net/MXzXP3
Boots imp.i104546.net/rngqkd
Cameras
Helmet www.insta360.com/sal/one_rs?i...
360 & Vlogging Cam www.insta360.com/sal/x3?insrc...
Use Code JAKE10 on RevZilla to save 10% on Exclusive Brands imp.i104546.net/6bkM1b
0:00 Intro
0:49 Engine Easy Install
6:06 Swingarm & Linkage
11:15 Engine Mounting Finishing
11:23 Ending
Business inquiries,
thegardensnakeyt@gmail.com - ยานยนต์และพาหนะ
Jake wanna hear something interesting? First time i watched your videos, i was in school, had no drivers license, barely made enough money to get myself with some friends lunch during recess and barely facial hair... Now, pretty much 10 years later, i have a car, a motorcycle, on the verge of being my own house and yes, facial hair... How time flies eh? 😂
I feel one million years old
SAME DUDE!
I rent tho...
But!
Own 3 bikes now!
Yz250
Grom
Shadow!
Loving it!
The life deal is always accelerating, that's why old folk put a date on things! Like ME! Enjoy it! 😉
I used to watch your videos religiously, but took a hiatus from motorbikes and lost interest. I've gotten a bike again, and I've been loving the series and watching your stuff again.
Thanks Jake!
Jake I GREASE THE ENTIRE SHAFT Garden Snake
This is the way
I always love these builds, is ace seeing someone put a bike together properly.... sure I can throw a spanner around, but seeing someone in a good garage, with room to swing a cat and them also knowing what they are talking about, well it is just enjoyable to watch, and far less stressful than my attempts in my grotty badly lit garage with rubbish English weather! 😀
I just put an engine in a freshly painted 1990 KDX200 frame on Sunday night, wish I would have waited until this video came out… brilliant
That is using your head for something other than a hat rack! Great job!
Well at least I know I’m not the only one who does things like watching the washer so a slow pole dance. Almost felt like I shoulda had some dollars ready. 😂✌️
This and the FZ-07 BSOS series made me buy a motorcycle for the first time, thank you Jake.
That washer moving was sick
This was satisfying to watch putting all new/freshly powdercoated parts together with brand new bearings and greasing everything well. I can't wait to watch the rest of the build and ride
After all that grease the bike finally has both groove and meaning.
I clicked 'like' for that clock.
I'm really digging the music choices you're making in the video... Damn dude!
This bike is gonna look so nice... you gonna make me go into a spending spree
I never would have thought to put a frame down over the engine like that, but I guess thats why you are there doing and I am here watching you (Wow, that just reads so wrong! But hay it is what it is.). It is looking great so far.
Haha didn’t seem wrong till I got the the part where you pointed it out 😂
OH MY GOD THE OLD GROM SHIRT!!
Jake! Great vid. Excited to see where the project goes. These 300l's are super appealing to me
Awesome build. This is looking sick.
That color looks so good!
Hey man I love the content you make, I’ve been watching you for a bit now and are a big reason I’m getting a 300L Rally. It’s supposed to be here end of April and will be my first bike. Thanks for making all the content. Appreciate it greatly.
Nice! You love it, gonna make you so many memories. Hope you haven’t had to wait forever to get it.
jake the bob ross of motorcyclez
🤣
Happy accidents
Ive never seen someone mount a motor in frame like that, pretty dam smart 4sure, great vid man can wait this thing is riipin
Learned that in the ol motorcycle mechanic school, great trick if you have the bike 100% apart.
@@TheGardenSnake we learn something new every day 👍🏾
Coming together nicely.
Looking good Jake.
Dayglo rims still would have looked good IMO but that is just me.
Love the build.
Wait till you see all finish up with graphics!
You take such care of you bikes for the next owner! Lol
Good
Love the content
We gonna see that bad boy at Zakar?
This is so satisfying to watch. Almost inspired me to do similar to my 250L Rally until I realised I am both too time poor and financially poor and have neither the patience or skill to pull it off 😂
Haha hey if it wasn’t my job.. Everything has got so expensive the last 6 months. I’m lucky I get to do this!
Had to lay 'er down
😂👍
I’ve been watching these vids since I was in middle school and seeing you ride around every now and then and always swearing I’d get a bike and come to the supermoto sundays. Sadly the age gap kinda missed that but we’re here anyways
I really thoughts the washer fall in slow motion 😅
When you first start it up, edit in 2 stroke engine noise. Would be funny.
omg I should have done that. Videos already up on patreon. I want to turn back time haha
WTF did you get a Silly Walks clock? Awesome. I need that for some reason
Dad got me that. amzn.to/3MjEkgX
When you heat something which has a hole, it's counterintuitive, but the hole gets smaller because it's expanding in all directions.
I hear what your saying but I've also seen it work. I've done it plenty of times without freezing the other part and only heating. It always makes it easier. Have you tired it?
@@TheGardenSnake no, I think it probably isn't making much difference. The freezing might be doing enough on its own.
Hole gets bigger when you warm it's surround metal.
All things and lines and holes go bigger like on the photo when you warm the metal.
The hole and bearrings goes smaller if you make it colder.
So you must warm the frame and hole while you freeze the bearrings to make it fit easily.
That is basic physics.
V2 of this bike is looking really good so far, love the frame color. Could the bolts get zinc coated or something similar that would protect from corrosion but not add too much material that they wouldn't thread properly?
Maybe, nothing I’ve ever messed with. But I sure do know how to grease some bolts up 👨🌾
Hey I know this guy!
Ohhhhh man ohhhhhhhhhhhhhhhh man ohman ohman ohman ohman ohman yippieeeeeeee!!!
Sorry for the schizo comment but this is real excitement
Miller Lite? And here I thought you drank BEER!
Naw just this cheap water
What about antiseize on the shank of the bolts to prevent corrosion? Would that work?
Yeah, I used that too on the threaded parts but didn’t show it cuz people will get annoying in the comments. They’re all locking nuts, properly torqued. They’re not going anywhere but people see you put that on and go silly.
Possibly a dumb question, and maybe you answered it before, but why didn't you also paint the bottom end?
Two reasons. It’s a pain without it taken apart. All those bolts just painted over isn’t my favorite way to do things. Secondly, there’s case covers going over the bottom end that are satin black. All together it looks black. Trust me, it’s actually done already.
Why don't you use like a small paint brush to spreading grease?
cuz I'm silly haha
@@TheGardenSnake my response to questions like that is usually “because this is what I had handy at the time”. But silly works too. 😂
Hey Jake do you think 10 hp more is possble with stock honda without big bore kit?
Port it, airintake from the CBR300, Akrapovic stainless header and titanium slip-on.
Maybe if you do some head work. But without going into the motor I doubt it.
Did you order new ss bolts?
No, that would probably be $50+ bolts of you could even find them. Most likely would have to custom order so the cost would double/triple. Greasing the old ones like this will be fine for this application.
Sorry Jake, I've joined your Patreon like three months ago, unfortunately never really had the time to watch more than like 5 videos in total in the first month but Patreon seems to charge me every month even if I don't watch the new videos you upload.
Is that how your Patreon works? I don't get it, I'd like to support you and your content but atm I'm confused, when I joined I thought I had to pay if I actually watch one or more videos....sorry
No that's not the way it works. When you join you get access to everything I've ever done on Patreon. Weather you watch zero or every video I've ever done on there you pay the same. Kinda like netflix or hulu, you pay a monthly rate. You can make it as low as $1 a month if you like by setting a cap. Sorry if that was unclear when you joined.
Wtf. Why aren't your videos showing up even tho I'm subscribed.
Ah the good old I had to layer down trick.