@@regixssxssin1007 my case here is bc I daily drive my car and I don't want to ruin it or decrease its value, so i like to keep it stock. it's also more fun stock imo
I do not have a racing simulator, nor a good pc in which I can play good games like dirt rally or project cars, but I love your videos, I subscribe, greetings from Argentina :D
very cool tutorial instead of cutting part of the head off the M10 screw, I threaded the hole through the middle with a M4 tap so now when you screw in the M4 into the M10 it can be tightened to the point where it wont rotate
Thanks for this video, you have helped me a lot with your modding videos! I just started playing Dirt Rally and I am interested about your settings in that game. What Logitech profile settings use and what ffb settings you have in game?
My shifter knob came with 3 adapters. The middle one didn’t fit by a few millimeters and the biggest one moved around too much so I heated up the middle one and slid it on and now it’s perfect, no waddling no nothing!
Finally I can put my extra STi shift knob on my sin setup. I've been trying for years (g27 too) to come up with a way to make it happen. Question, will the weight of the real knob affect the longevity of the shifter itself.
this will complete my g29 setup.. I have already done a handbrake but need a taller shift knob... even thinking of a Ken block style sequential shifter handle.. I have used a rubber oring and taller screws from the shifter base to hold the oring for sequential setup.. my handbrake sits higher than the shift knob
What is the dimensions or thread of the screw that fits into the original shifter ‘bar’ I’m going to buy an extension but don’t know what type of screw it is
I purchased the files for this adapter and printed it. I also ordered the same exact shift knob as you. But I am disappointed to say that upon installing, the shift knob got stuck and had to be removed with force. Now the 3 printed adapter is stuck inside of the shift knob that I just got in the mail yesterday. Now what?
Nick Cheng If you're TRULY about racing, and have raced in real life, Assetto Corsa will change your life. I was a die hard fan for GT 2-5, FH 1-3, and FM 3-6. I heard about AC, bought it and fell in love. If you don't like real driving in IRL, it might be a bit much.
Cutting the bolt turns out to be really difficult for me... I've spent a whole day, run through 5 cutting pads, and recharged my Dremel 3 times, and still haven't cut off the cap yet. But I'm getting there... It is frustrating to think that I still need to drill through it.
Bolts are high tensile steel so you'll need very strong cutting discs and strong rating drill bits (standard metal bits will likely go blunt very quickly)
St3fan Yeah a bit more complicated than it seems. If you have standard metal drill bits you could give it a go, start with a really small bit and just go very slowly otherwise it'll just overheat the bit and to blunt straight away - try and give the bit some time to breath every now and then. Just watch out it'll get very very hot as you already found out I suspect 😂
@@tounydu77 yes, according to 99% of people who answered the question in forums, as long as you do not open the internals of the shifter, changing the shifter knob ike this wont break your warranty
In the end... A little ball for gearshift instead of a little ball for gearshift... And so easy to do with a simple tool case. I'm going to do mine right now.
Ralliart shift knob, M10- 1.25 x 1.5cm and M4- 0.7 x 2.5cm for Logitech. The first bolt will depend on what shift knob you use. Check the description I have listed some car brands and sizes.
Hello, I was wondering something. This steering wheel uses electric motors with brushes, when these will consume as in all brush motors how do you do? 🙄
that moment when your sim racing setup has more mods than your actual car.
I can’t mod my actual car cause I share it with my brother😂 that’s why I have this
@@regixssxssin1007 my case here is bc I daily drive my car and I don't want to ruin it or decrease its value, so i like to keep it stock. it's also more fun stock imo
Can’t mod my car cuz I don’t have one lmao
@@lancia-037 I daily a slammed 03 corrola straight piped it's fun at times but can be misery😀😭
@@Griffinpowersports I love beater cars xD lol
Amazing tutorial , the shifter was feeling toy-like , but after applying a couple of your mods , it's great to say the least. Keep it up lad.
The size for the small screw is m4x 0.7
I only see M4x6mm or 8mm
Thanks
Can’t you just take the one from the knob that was originally installed?
@@captain_bow7672 you'll need a longer one
@@hijirirakuen6832 that's what she said
0:15 me : ah, impossible
lol he has a link for a 3d printed one i just bought it
didnt work with my kitchen knife ;(
Angle grinder
@@reconnaissance7372 dremel
i saw the and quit the video after i commented this.
you sir, are a legend, i love you from the deepest of my heart!
You're a genius.
I think the some thing.
A *Genius
@@erickwon8528 bla bla bla
@@erickwon8528 Mexican? Lol. Fucking idiot.
@@erickwon8528 why are you so toxic? Did your parents not give you enough attention?
I just want to say this is the smartest fucking thing I've seen all week man
Thanks Ethan!
what was so special about the thing you saw last week?
@@pimpampet9202 tiktok
Bro your content is getting better and better every time you upload! Good job mate.
If you fit the adapter bolt first into the knob, you can mark the right position to face the logo towards you. ;)
Peter M
If you're concerned with the logo direction, you could stick a washer on the bolt before you screw on the top.
Well, I can't make these myself, so had a friend do it for me from the instructions here, thanks a lot!
nice, love how you keep it al so simple
Haha, finally a reason to pull my ebay TRD shift knob off the shelf. Loving your content man! Doing this and the inverted pedals this week.
2:01 *Mitsubishi wants to know your location*
really really useful!I couldnt have done it without this video! :D
So simple, so easy, so smart. It's big brain time!
I do not have a racing simulator, nor a good pc in which I can play good games like dirt rally or project cars, but I love your videos, I subscribe, greetings from Argentina :D
I'm guessing this will work with G27? Still waiting on analog handbrake! Great video
Thanks, Yes will work with the g27 and g25. Will be starting on the analog project soon.
very cool tutorial
instead of cutting part of the head off the M10 screw, I threaded the hole through the middle with a M4 tap
so now when you screw in the M4 into the M10 it can be tightened to the point where it wont rotate
Well done. Thank you very much. Thumbs up!!!
Thanks for this video, you have helped me a lot with your modding videos! I just started playing Dirt Rally and I am interested about your settings in that game. What Logitech profile settings use and what ffb settings you have in game?
fantastic idea, thanks for sharing
with this mod i can use my sparco shifter knob !
Nice!
My shifter knob came with 3 adapters. The middle one didn’t fit by a few millimeters and the biggest one moved around too much so I heated up the middle one and slid it on and now it’s perfect, no waddling no nothing!
All your G920 videos are just perfect. Great work. I hope to see more. Thanks for sharing.
How did you go about getting such a clean cut on the head of the bolt. And what number bolt was it? And what number machine screw?
Thanks bro
Finally I can put my extra STi shift knob on my sin setup. I've been trying for years (g27 too) to come up with a way to make it happen. Question, will the weight of the real knob affect the longevity of the shifter itself.
Incredible!!! 😱❤
Will this work for the truck shifter mod as well??
amazing!!!! u help me alot!!!
Your welcome!
amstudio 😀
In dirt rally 2.0 I use sequentals and I use logitech shifter as a handbrake
Great idea . Thanks for sharing. I will make one at work tomorrow.
( Why would 19 people thumb down this idea?)
Hans Schtuk how do you see if people thumb down a comment?
@@flytdigforhelvede3961 the video
@@mysliphoto8400 a "COMMENT"
Link to the shift knob doesnt work. Will this work on any shift knob
this will complete my g29 setup.. I have already done a handbrake but need a taller shift knob... even thinking of a Ken block style sequential shifter handle.. I have used a rubber oring and taller screws from the shifter base to hold the oring for sequential setup.. my handbrake sits higher than the shift knob
Awesome work! Nice to hear my mods are being put to good use. Yeah a Ken Block shifter handle would look great!
thank you
Can I use this design to make a functional short shifter?
Can you please tell me where did you buy the speedometer?
where did you get the bolt from, bc your australian did you get it from bunnings
Fantastic
Is there any reason you have the hand brake upright and in that location? I always see them on their side and behind the shifter.
Where did you get the G29 gear knob
great job and very inventive.
whats the thread and pitch of the cut screw and the extended securing screw? cheers
All the bolt/screw sizes and pitch are in the description
Making my own stainless steal shift knob was wondering what size the smaller screw is
Do you have a SoundCloud? Where do you get your music?
just asking.. how on earth did you remove that from that screw ? and drill a hole through the screw ?
Yo fam wher did you got the steering wheel can you link me pls I want one too
link for the shifter knob?
@Amstudio Do you sell extra complete bolts? If so i could buy some since i don't have the tools to perform this mod.
goo.gl/cxJkcg 3D print versions available. You can use a local print service like 3dhubs if you don't own a 3d printer.
What is your handbrake? :)
Will the bolt you installed on the shifter fit any shifter knob?
Freakin Awsome Job Dude love You Videos consider doin' it on my knob
this is nice
What is the dimensions or thread of the screw that fits into the original shifter ‘bar’ I’m going to buy an extension but don’t know what type of screw it is
What game is that in the start?
Can you just get a metal cap to it?
Is that nut adapter can fit most of shift knob outhere?
No
Is that a 10mm screw?
I purchased the files for this adapter and printed it. I also ordered the same exact shift knob as you. But I am disappointed to say that upon installing, the shift knob got stuck and had to be removed with force. Now the 3 printed adapter is stuck inside of the shift knob that I just got in the mail yesterday. Now what?
What games are good for the G920? FM6 is horrible, and FH3 is manageable.
Are you on PC or Xbox? On Pc - Assetto Corsa and Dirt Rally are pretty good.
Xbox
Nick Cheng If you're TRULY about racing, and have raced in real life, Assetto Corsa will change your life. I was a die hard fan for GT 2-5, FH 1-3, and FM 3-6. I heard about AC, bought it and fell in love. If you don't like real driving in IRL, it might be a bit much.
Is that AC for PC or Xbox? If the Xbox version is decent, i'll probably get that instead of investing into a PC for now.
Nick Cheng It's for both. I have it for the Xbox. I don't have the drive to invest in a gaming computer setup.
Cutting the bolt turns out to be really difficult for me... I've spent a whole day, run through 5 cutting pads, and recharged my Dremel 3 times, and still haven't cut off the cap yet. But I'm getting there... It is frustrating to think that I still need to drill through it.
Bolts are high tensile steel so you'll need very strong cutting discs and strong rating drill bits (standard metal bits will likely go blunt very quickly)
I finally finished cutting the cap... but I have nothing that could drill through the bolt :(
St3fan Yeah a bit more complicated than it seems. If you have standard metal drill bits you could give it a go, start with a really small bit and just go very slowly otherwise it'll just overheat the bit and to blunt straight away - try and give the bit some time to breath every now and then. Just watch out it'll get very very hot as you already found out I suspect 😂
remember you can never use too much oil/water/spit for cooling, it makes a Huge difference, Huge.
some kid from Surrey Very very true! Great advice
Does it work with g27 too?
U can also use a euro adapter for a bmw or vw, because they clamp down on any shifter.
Hello, how you make that wheel? So cool
Buttons pannel* 😅
does this work with any shifter knob?
Will this break my logitech warranty?
Irshaad Shaikh did you found the answer of you r question ?
@@tounydu77 yes, according to 99% of people who answered the question in forums, as long as you do not open the internals of the shifter, changing the shifter knob ike this wont break your warranty
ok, thank's for the answer ^^ i will change mine to an aluminium one@@Ssh52
Can you fix the link to download the 3d printable version? It doesn't seem to lead anywhere
Cool mod, although you can save yourself the hassle and order a BMW/MINI stick shift adapter. This will make it so any threaded knob can be attached.
In the end... A little ball for gearshift instead of a little ball for gearshift... And so easy to do with a simple tool case. I'm going to do mine right now.
may I ask what the part sizes and links for all the parts you used ? just wondering.
Ralliart shift knob, M10- 1.25 x 1.5cm and M4- 0.7 x 2.5cm for Logitech. The first bolt will depend on what shift knob you use. Check the description I have listed some car brands and sizes.
amstudio Would you sell a complete kit of the White Ralliart knob with the bolts and everything already cut?
everything already pre made**
Yes please do this. I'm very lazy
May I ask what tool you use to cut the bolt?
Hacksaw then hand file.
What do u thing about wrc paddle shifter? 😏
Works like sq but in one paddle :D
whats that thing called thats under your monitor and where can i buy one/ make one?
lmao nevermind it says at the end
what should i use to cut the screw
Is there a other way then cutting the bolt?
Where did you get the shifter knob from
eBay link in description
Had my nismo done..i used a plastic reverse screw. Need to find a way to make it work with 7 speed cars...
would be nice to know the sizes
Genius is the one who invented the tape.
Longer shift movements must be great
Whats the size of the bolt?
Will this work on G27?
What size is the small bolt
Where did you buy the bolts etc?
Hardware Store. Home Depot etc.
Can you put any gearstick on it
Hello, I was wondering something. This steering wheel uses electric motors with brushes, when these will consume as in all brush motors how do you do? 🙄
Good job 👍
Please name games
thx but you must say that the little screw is not the one who come with the shifter . and you can say the thread size
Can you make a Video for making a diy Stifter?
bonjour belle vidéos merci tutoriel sur ton 300 svp
Anyone know the size of the bolt that holds the shifter knob down i lost mine and need a new one
Can I buy this from you our where can I buy this
what handbrake is that?
th-cam.com/video/kv0FTpRLFMY/w-d-xo.html
Link where you bought the knob?
Search for Ralliart Gear Knob
What size Bolt is the small one?
EXPLODING DRAGONS M4 x25mm stainless steel
can you make a setup video pleas?
ii brought the exact shifier but it doesn't fit on my adapter
does this void warranty?
Not sure, But seeing as logitech added customization to the pedals prob not
👏👏👏👏
What game is this?
The OEM bmw zhp shift knob doesn't screw on. I was going to get a zhp knob for this oh well