Hi This was a great tutorial for the Hangers, But I am facing a challeng when ever am using the hanger it is breaking the pipe into peaces. so that it decreases the pipe length to multiple peaces. If I Use 2 hangers for 3Mts of at 1Mtr and 2Mts then Iam getting 3 Peaces of the Pipe. And length also reduces in the pipe over all to 2.85mts bcz of the width of the hanger deducted. any alternative solution for this problem
Hi, Thanks for the video! when I load this into project, I'm getting "The family is connected in a network and can no longer keep connectivity. Disconnect family from the network?" error. What should I do?
Thank you, i'm trying with no solution to import cad into family but the only option is the "Ref. Level" and i need the imported CAD to other views like Front or Back... Etc. Please I need your valuable reply.
I´m putting the connectors in a part that is part of a family so, when I loaded it back into the family and then into a project, the connectors didn't show up. Could you tell me what I'm doing wrong?
Hi, Great tutorial, I'm just having problems because the insulation makes the pipe's diameter bigger. Do I add another extrusion around the pipe dimension itself in the family? I hope you can help me. Thanks!
Hi I am not sure if you have solved your issue with pipe insulation, what you can do is to create another parameter name it like Pdia than set your DOP to Pdia*1.2 and assign pipe connector dia meter to Pdia instead of DOP. I use steel pipe schedule 40 depending on the pipe nominal size the outer diameter changes. this not a full solution but it does work.
God jesus finaly someone said what shoud be said. there is something wrong in this hanger . part of the pipe in hanger is dismissed like it has never been existed😀. its a big mistake
@@ClickAndDesign. come on man! I didn't mean to bother you! just think about it for a minute. let's imagine that the thickness of your support is 5 cm and then in a long route, Let's imagine 50 m you have 15 of these supports, which means you are losing 15*5cm=75cm when BOM calculating Isn't that True???
one of the best tutorial on youtube for pipe hanger in revit
Thanks!
Hi This was a great tutorial for the Hangers, But I am facing a challeng when ever am using the hanger it is breaking the pipe into peaces. so that it decreases the pipe length to multiple peaces. If I Use 2 hangers for 3Mts of at 1Mtr and 2Mts then Iam getting 3 Peaces of the Pipe. And length also reduces in the pipe over all to 2.85mts bcz of the width of the hanger deducted. any alternative solution for this problem
You are the best, thank you for share your knowledge
Jabardast
Kindly Share and Subscribe the hard-work!
your tutorial are very usefull thanks for creating such content on youtube👌
It's my pleasure
Спасибо, что делишься с нами такими ценными знаниями!
wish you best!
Nice tutorials training. Intelligent works.
Thanks!
For the grooved fittings, go to the link in that particular video and you will find a separate folder for the fittings, i hope now you can.
Wow,,, its great bro. Its clear my all doubts.
Great job brother God bless u
el mejor tutorial que vi
Awesome tutorial Bro, more power to your channel and God bless.
Thank you!
Thank you. Great Tutorial!
Great Job done by you.... appreciate...;)
Great job, Thank you
You are welcome!
it was very useful thanks
Hi, Thanks for the video! when I load this into project, I'm getting "The family is connected in a network and can no longer keep connectivity. Disconnect family from the network?" error. What should I do?
Супер!
Thank you, i'm trying with no solution to import cad into family but the only option is the "Ref. Level" and i need the imported CAD to other views like Front or Back... Etc. Please I need your valuable reply.
is it posible to adjust to outside diameter of pipe. when placed on project.
What happens if you use attached to top or base of a roof, does it work even on sloped roofs ??
I´m putting the connectors in a part that is part of a family so, when I loaded it back into the family and then into a project, the connectors didn't show up. Could you tell me what I'm doing wrong?
Hi, Great tutorial, I'm just having problems because the insulation makes the pipe's diameter bigger. Do I add another extrusion around the pipe dimension itself in the family? I hope you can help me. Thanks!
Hi I am not sure if you have solved your issue with pipe insulation, what you can do is to create another parameter name it like Pdia than set your DOP to Pdia*1.2 and assign pipe connector dia meter to Pdia instead of DOP. I use steel pipe schedule 40 depending on the pipe nominal size the outer diameter changes. this not a full solution but it does work.
Hi, is it possible to get this family in 2019 Revit version? Hope you can post a link if possible, thanks.
Hey man! Could you take a question from me?
sir kindly share with me the copper pipe family plzz.
Sir when I connect the hanger to the pipe... The pipe is taking slope automatically.. How to fix this?
OTTIMO LAVORO. Peccato che è stato prodotto con il 2021 , io ho la versione 2020 e non posso aprirlo.
Hello Brother you did Pipe Hanger Connection showing wrong pipe was disconnting apply this
Assalamu'alaikum
the pipe hanger doesn't cut the pipe itself.
God jesus finaly someone said what shoud be said. there is something wrong in this hanger . part of the pipe in hanger is dismissed like it has never been existed😀. its a big mistake
Go make your own if you are such smart 😎
It’s a trick to get such type of hanger, common hangers exist in revit fabrication libraries.
@@ClickAndDesign. come on man! I didn't mean to bother you! just think about it for a minute. let's imagine that the thickness of your support is 5 cm and then in a long route, Let's imagine 50 m you have 15 of these supports, which means you are losing 15*5cm=75cm when BOM calculating Isn't that True???
If BOM is your main concern, you can use fabrication tools. And if more doubts so pls do a favour to unsubscribe my channel 😇
It is not convenient to cut pipes at every hanger.