What makes cycloidal gearboxes so amazing?

แชร์
ฝัง
  • เผยแพร่เมื่อ 18 ธ.ค. 2024

ความคิดเห็น • 74

  • @smellycat249
    @smellycat249 ปีที่แล้ว +155

    A cycloidal gear drive CAN be back driven. Yours was just not smooth enough to allow for the motion.

    • @GregorShapiro
      @GregorShapiro ปีที่แล้ว +16

      If the tolerances are fine enough and the surfaces of the right shape and surface fineness a cycloidal drive can be back driven. The (usually) high reduction of cycloidal gearsets makes for a high loss of torque and thus difficulty in back driving them. The fact that all *teeth* are in rolling contact with their counterparts means that a MUCH larger torque can be transmitted and the risk of shearing off a tooth on a pinion or bull gear disappears.

    • @kindaovermyhead
      @kindaovermyhead ปีที่แล้ว +15

      He also was not going to get enough torque by hand with that small shaft

    • @isaacnichols12
      @isaacnichols12 9 หลายเดือนก่อน

      Great content

    • @SWTORLOL87
      @SWTORLOL87 2 หลายเดือนก่อน

      He did it in the final shot.

  • @brettfafata3017
    @brettfafata3017 ปีที่แล้ว +23

    Have you shared these files anywhere? I would love to print one myself!

  • @Engineezy
    @Engineezy ปีที่แล้ว +7

    Awesome video! Excited to see it connected to a drill 🙌

  • @chadjensenster
    @chadjensenster 5 หลายเดือนก่อน +3

    Everybody talking about an imbalance, I made a 3d printed one for a robotic arm for my mechanical engineering senior project. I printed 2 rotors 180 degress out of phase. There was no vibration. Also, you can back drive them as when the robot lost power, the end of the arm would drop.

  • @BruceNielsen-pc6zl
    @BruceNielsen-pc6zl 5 วันที่ผ่านมา

    The oil pump in a engine uses this principal to pump at a fairly high pressure and volume. Its referred to as a trochoid oil pump.

  • @JakobDam
    @JakobDam 2 หลายเดือนก่อน

    Thanks for making these videos - I'm learning so much about gear types!

  • @ShawnColeman01
    @ShawnColeman01 ปีที่แล้ว +2

    Using this with steel encased with oil at higher RPM: Handheld? Vibration monster with some heavy waddle with the rpm ramp-up. Fixed machine - Very nice aside from that it's a Friction monster regarding sliding-friction (where it sort of slides at the apexes pointing inward from the orange gear), if it's smooth it will work nice, but the sliding-friction will create a lot of heat.
    Dirt & Grime: since the apexes of the blue gear seems to "press" into the wells of the orange gear, dirt and grime could cause incremental damage which would seize the system very shortly after first detection of any irregularity.
    Using pristine and pure material and-of utmost exquisite part-precision and lubrication you can have a very small high torque gearbox that WILL in fact last a very long time. Yet still, after the first detection of any irregularity, you will have a failing system in no time. It's very delicate, but still if you want very nice things you need to be prepared to lose them easily.
    This also seems ridiculously easy to replace, lots of replacements won't be a hassle in most machines and devices, the cost for this even with the best of everything you can get will still cost significantly less if you desire keeping spares and have the will to replace them when needed so.

  • @evanc8223
    @evanc8223 หลายเดือนก่อน

    Excellent 😊

  • @XInfinity2024
    @XInfinity2024 ปีที่แล้ว +3

    Good video. You should combine this print with the World's biggest gear ratio... video and tweak it and see if you can spin it and how many gears it will work with

  • @eduardoschroeder8502
    @eduardoschroeder8502 ปีที่แล้ว +3

    I have a doubt, on my project i was using planetary gears to make a reduction of 64:1, but the high RPM and friction kept destroying the teeth. Would a cycloidal gearbox be a good option?
    Nice video btw

  • @LovesM855A1
    @LovesM855A1 ปีที่แล้ว

    A oil control gear for a mustang looks very similar minus the strap on top etc… Coyooooooooooote baby!!

  • @recepkaraman6327
    @recepkaraman6327 11 หลายเดือนก่อน

    Hello, did you share the cad files of the cycloid reducer in the video anywhere?

  • @ralphmueller3725
    @ralphmueller3725 ปีที่แล้ว

    I wonder if a cycloidal engine would be possible? think like a rotary but using the action of the cycloidal interface as the engine rotor.

  • @peternickerson2911
    @peternickerson2911 ปีที่แล้ว +8

    I think this is very cool, however, there a very many drawbacks to cycloidal gearboxes with the biggest being manufacturing as well as vibrations. Do to all the rubbing that occurs they easily generate rough vibrations which is unacceptable in profession machinery. When it comes to manufacturing the process to mass produce gearboxes. A standard gear is very easy to manufacture, however a cycloidal gear requires a milling machine. This is okay for special cases but their is a reason why you rarely see cycloidal gear drives mass produced. (Also cycloidal gearboxes can be back driven)

    • @conorstewart2214
      @conorstewart2214 ปีที่แล้ว

      I think you mean precision machinery, not professional machinery.
      Standard spur gears often require milling to create them as well, especially if they need to be precise.

    • @Eric-lj8sw
      @Eric-lj8sw 5 หลายเดือนก่อน

      Vibration can be reduced with a second set out of phase.

    • @chadjensenster
      @chadjensenster 5 หลายเดือนก่อน +1

      A milling machine is more specialized than a gear hobbing machine? 😂😂

    • @Azukaae
      @Azukaae 2 หลายเดือนก่อน

      The vibration is the most apparent issue, and it is easily mitigated by a second gear set that is mirrored 180° so it cancelled the vibration the first gear made

  • @dineshsharma2010
    @dineshsharma2010 23 วันที่ผ่านมา

    fantastic

  • @antoniodomit2782
    @antoniodomit2782 8 หลายเดือนก่อน

    Is there a way to have your files to 3d print the drive? or can I buy one from you?. Thank you
    Antonio Domit

  • @BigWave69
    @BigWave69 ปีที่แล้ว

    How do 3D printed Cycloidal gearboxes hold up to wear versus planetary? I want to start getting into designs involving motors and rotation, but I want to stick to one dominant gearbox strategy to start, I I prioritize ease of printing and reliability.

    • @conorstewart2214
      @conorstewart2214 ปีที่แล้ว +1

      What ever you go for using some form of lubrication is always a good idea.
      I started with jus a compound spur gear, gear train and it worked well enough, especially with nylon and lithium grease. Then I tried a planetary gearbox and it worked well too, albeit being more difficult to assemble (part of that was just my design). I haven’t tried cycloidal yet, but I plan on doing it. You should just experiment and try a few, just small scale ones with small motors and see which ones work best for you, with all the gear generators you can get now it really isn’t that difficult to design them. You should also experiment with different gear profiles like helical or herringbone.
      Also when printing gears do it on rafts, any elephants foot could cause the gears to mesh incorrectly and may lead to excess friction or the gearbox just not working. I prefer printing gears with a 0.25 mm nozzle but 0.4 mm does work too, you just won’t be able to make gears quite as small.

    • @BigWave69
      @BigWave69 ปีที่แล้ว

      @@conorstewart2214 Excellent advice, thanks for typing that out for me

  • @MrArtimus1961
    @MrArtimus1961 ปีที่แล้ว +6

    Very simular to how an oil pump works in a vehicle.

    • @AlexDaDermahurr
      @AlexDaDermahurr ปีที่แล้ว

      Its also close In function to a rotary engine

    • @GregorShapiro
      @GregorShapiro ปีที่แล้ว +1

      Not at all. This is rotational speed reduction. Not fluid pumping. (though the internals do have some visual similarities).

  • @Xubor
    @Xubor ปีที่แล้ว +1

    I think why people rather use planetary gears is because they don't create an unbalance.

  • @wowgggearing
    @wowgggearing ปีที่แล้ว +1

    friction between blue gear & white shaft??

    • @conorstewart2214
      @conorstewart2214 ปีที่แล้ว

      There will be some. If the tolerance isn’t too tight then it won’t be an issue. Often people put a bearing in there and between the yellow piece and blue piece to help reduce friction. When you make any gearbox to actually use you should lubricate it and with 3D printing the gearbox will probably need to be “broken in”, just run it until it gets smoother.

  • @karldavidson9767
    @karldavidson9767 หลายเดือนก่อน

    Do you sell these?

  • @christianbureau6732
    @christianbureau6732 ปีที่แล้ว

    Thanks

  • @peterg902
    @peterg902 7 หลายเดือนก่อน

    Any fusion downloadable files so kids can play with it?

  • @BenSmith0
    @BenSmith0 9 หลายเดือนก่อน +3

    Cycloidal drives CAN be back-driven, as long as you don't weld the output shaft in place.

    • @supermodern
      @supermodern หลายเดือนก่อน

      Back driven means?

  • @HoodyKid100
    @HoodyKid100 ปีที่แล้ว

    Strain wave next

  • @McRootbeer
    @McRootbeer ปีที่แล้ว +2

    It would be cool to see a backdriveable/reversible cycloidal gearbox. And am I crazy or does this look like it could be turned into an electric motor?

    • @peternickerson2911
      @peternickerson2911 ปีที่แล้ว +5

      your crazy. This is a gear box, not an alternator or generator.

    • @MyHandleIsGood
      @MyHandleIsGood ปีที่แล้ว +2

      Could be attached to a motor in a fairly compact package, especially for the reduction. However, this is not, and never will be, a motor.

    • @GregorShapiro
      @GregorShapiro ปีที่แล้ว

      A well made cycloidal gear IS back drivable.
      th-cam.com/video/pn7XzPfCTxA/w-d-xo.html

    • @king_james_official
      @king_james_official ปีที่แล้ว +3

      wdym turned into a motor lol

  • @TheMoody876
    @TheMoody876 ปีที่แล้ว

    Looks like the inside to a ls engine oil pump

  • @umbratherios5614
    @umbratherios5614 3 หลายเดือนก่อน

    "basically no backlash..."
    3 seconds earlier...
    *Rattles the thing like a musical instrument*

  • @marcosmark3007
    @marcosmark3007 ปีที่แล้ว

    tanks, i send my LIKE!!!, maybe can share the stl?, thanks

  • @DoIGetTube
    @DoIGetTube ปีที่แล้ว

    Wondering whether the German engineer Herr Doktor Felix Wankel drew upon that principle to design his now legendary rotary internal combustion engine cannot be helped.

    • @DoIGetTube
      @DoIGetTube ปีที่แล้ว

      Nippon's Mazda Motors had employed the said engine in its RX series of motor cars for decades, and as of this response's time stamp date, it most likely still did.

  • @olegallito5742
    @olegallito5742 ปีที่แล้ว

    >it can't be back driven
    Nah, it's just the 1:8 ratio, pal. Add a handle, lube the thing up and try just a bit harder.

  • @thomasthemtman
    @thomasthemtman ปีที่แล้ว +1

    Seems like a ton of friction though 🤔

    • @designsforge4153
      @designsforge4153 9 หลายเดือนก่อน

      Isn't that where the torque comes from?

  • @goshaman1100
    @goshaman1100 3 หลายเดือนก่อน

    you did not just solder 3d printed parts together 💀

  • @NikolajLepka
    @NikolajLepka 7 หลายเดือนก่อน +2

    SO much friction in this design

  • @frenchperformer5401
    @frenchperformer5401 ปีที่แล้ว

    G R E A S E

  • @-rakie-
    @-rakie- ปีที่แล้ว +2

    Gears

  • @lawrencedoliveiro9104
    @lawrencedoliveiro9104 ปีที่แล้ว

    To those who can’t afford Fusion 360

  • @fasthelpru
    @fasthelpru ปีที่แล้ว

    Если он сделал ручку чтобы вращать, зачем вращал рукой? Бесит.

  • @JohnJaggerJack
    @JohnJaggerJack ปีที่แล้ว

    The fact that thing is over complicated and frail, when one could achieve the same result with a much more simple geneva mechanism....

  • @mee6helpcenter909
    @mee6helpcenter909 ปีที่แล้ว

    Bean

  • @TundeEszlari
    @TundeEszlari ปีที่แล้ว +1

    I love your contents, can I get a comment heart?

  • @recepkaraman6327
    @recepkaraman6327 11 หลายเดือนก่อน

    Hello, did you share the cad files of the cycloid reducer in the video anywhere?