Can you 3D Print a Mechanical Clock?

แชร์
ฝัง
  • เผยแพร่เมื่อ 24 ธ.ค. 2024

ความคิดเห็น • 704

  • @setautomation
    @setautomation ปีที่แล้ว +53

    About 12 years ago I looked around online to try and buy a clock kit because I wanted to make something like this. It did not exist. So I decided to build my own. Now these clocks are everywhere. It's so exciting to see so many peoples different ideas on how to make them. Especially with 3d printing now the designs are endless. You did a great job of explaining the different types of escapements and explaining the gear ratios. I so wish this video was around 12 years ago when I started searching. Keep up the great work.

    • @Engineezy
      @Engineezy  ปีที่แล้ว +7

      Thank you! Appreciate you watching

  • @tbren6707
    @tbren6707 2 ปีที่แล้ว +215

    So badass! Really great explanation of gear ratios and torque. I've never done a clock project like this, but I might have to give it a shot now. Awesome.

    • @Engineezy
      @Engineezy  2 ปีที่แล้ว +12

      Thanks Tom, definitely a fun endeavor!

    • @gkgeze
      @gkgeze ปีที่แล้ว +2

      You honestly should, I would assume doing something like this would be really fun

  • @SayonR
    @SayonR 2 ปีที่แล้ว +330

    This escapement series has been so fun and exciting to follow all this while! It looks so cool all together!

    • @Engineezy
      @Engineezy  2 ปีที่แล้ว +14

      Thanks for sticking around for the whole thing! Glad you enjoyed :)

    • @moji3812
      @moji3812 ปีที่แล้ว +1

      Yeah 👌

  • @MartinTemmink
    @MartinTemmink 2 หลายเดือนก่อน +3

    This week I bought the plans for this clock, printed the parts on a Prusa MK4S which only took less than 24 hours. Assembly is easy, as long as you are precise. However, making sure the clock ticks continuously, took a little bit longer than I expected (few hours), but eventually it runs. It's definitely worth the money for the plans. I also like that this clock runs 100% mechanically, instead of battery powered. And you learn a lot regarding gears, ratio and the mechanisme of a clock. Great model and a Fantastic from the Designer @Engineezy!

  • @StevenJonWest
    @StevenJonWest ปีที่แล้ว +72

    I love all the different unique sounds the escapement mechanisms make 🤩🤩🤩

    • @Engineezy
      @Engineezy  ปีที่แล้ว +6

      So satisfying eh

  • @useazebra
    @useazebra 2 ปีที่แล้ว +20

    I'm not sure if I should love or hate this, because now you've got me trying to learn CAD...

    • @Engineezy
      @Engineezy  2 ปีที่แล้ว +6

      Its such a useful skill- you might hate this in the short term, love it in the long term 😀

    • @poporbit2432
      @poporbit2432 ปีที่แล้ว +2

      Amen to that. I found tinkercad to be a good tool to learn one. It seemed very limited in capability but after experimenting on multiple gear designs I discovered some real

  • @kevinbowker2385
    @kevinbowker2385 ปีที่แล้ว +4

    This is seriously one of the coolest things I've ever seen.

  • @rampart1234
    @rampart1234 2 ปีที่แล้ว +40

    Your work is not only original but also awesome. Thank You.

    • @Engineezy
      @Engineezy  2 ปีที่แล้ว +3

      Thanks John!

  • @ultraslashism
    @ultraslashism ปีที่แล้ว +23

    I feel nothing but fully impressed. You are an amazing mechanical engineer and artist. I have watched several videos on how watch works, none of them explain better than you

  • @adamhaziqsalleh
    @adamhaziqsalleh ปีที่แล้ว +3

    I've been thinking about accuracy the whole time of watching this video and when you showed the screw thread on the pendulum is just so satisfying. What a great build and nice video

  • @ice_man1117
    @ice_man1117 ปีที่แล้ว +130

    Can you partner with bambu to make a kit

    • @waqar_bux
      @waqar_bux 3 หลายเดือนก่อน

      Yaaa pls do ittt

    • @BackDaws
      @BackDaws 2 หลายเดือนก่อน +1

      Omg I need these clocks ❤

    • @ABean56
      @ABean56 หลายเดือนก่อน +1

      You forgot the question mark

  • @DEtchells
    @DEtchells ปีที่แล้ว +9

    Wow, what a cool design; I’m gonna make one of these for my workshop!
    One minor point: If the clock is running fast, I’d think you’d want to move the pendulum weight down, to increase the period of the pendulum swing, no?
    Super work and a beautiful-looking design!

    • @Engineezy
      @Engineezy  ปีที่แล้ว +4

      Yes! I mixed it up in the vid 😬 thank you

  • @jhanzaibhumayun5782
    @jhanzaibhumayun5782 2 ปีที่แล้ว

    Thank you for this amazing tutorial!

    • @Engineezy
      @Engineezy  2 ปีที่แล้ว

      Thanks so much! Glad you enjoyed :)

  • @artart5404
    @artart5404 ปีที่แล้ว +1

    Thank you so much for not rushing of the different types of escapements

  • @larshinrichsen6581
    @larshinrichsen6581 ปีที่แล้ว +1

    Thanks for not just explaining the printing but the great mechanics behind such a "simple" thing like a clock. We should respect the great little inventions that took us to precise mechanic clocks.

    • @Engineezy
      @Engineezy  ปีที่แล้ว

      Thanks for watching and appreciating 👊👊

  • @y0utubeu5ername
    @y0utubeu5ername ปีที่แล้ว +12

    This is by far the best and most concise video I've seen explaining the various escapements and how a pendulum clock actually works. I really want to give this a try. Thanks so much for posting, excellent!

  • @Subcritical96
    @Subcritical96 ปีที่แล้ว

    Speaking from a mechanical engineering viewpoint, you’re brilliant!

  • @MissNebulosity
    @MissNebulosity 8 หลายเดือนก่อน +2

    this video completely demystified mechanical clocks for me. Thank you very, very much!! I finally get it!!!

  • @ezekielflores2149
    @ezekielflores2149 ปีที่แล้ว

    One of the best explanations of the time keeping mechanics I've seen yet.

  • @Grzzs
    @Grzzs 2 ปีที่แล้ว +45

    I'd love to see more detail on how to design some of the escapements in detail. Like the gear teeth or escapement teeth in SOLIDWORKS.

    • @Engineezy
      @Engineezy  2 ปีที่แล้ว +15

      Noted! Maybe in the future! Cheers :)

    • @animoose
      @animoose 2 ปีที่แล้ว +2

      Look for videos by Jacque Favre. He has a walkthrough in Fusion 360 and another in FreeCad.

  • @opiwaran354
    @opiwaran354 หลายเดือนก่อน

    Outrageously good explanation, very clean video, one can tell that you not only understand the topic very well but you also understand how to structure and explain the information clearly.
    Keep doing your thing, I'm subscribed!

  • @Dglinski2
    @Dglinski2 2 ปีที่แล้ว +2

    Dude stoked to see this all come together! Great job and beautiful design

  • @WRZ_450
    @WRZ_450 3 หลายเดือนก่อน

    This is the coolest project for 3D printers. Purchasing the model and starting on this immediately.

  • @Creative_Electronics
    @Creative_Electronics 2 ปีที่แล้ว +4

    Awesome project! Nice and interesting video!

    • @Engineezy
      @Engineezy  2 ปีที่แล้ว +1

      Thank you!

  • @Handskemager
    @Handskemager 2 ปีที่แล้ว

    That minute hand is Awesome! Well done!

  • @epoxyfloortoowoombapro7248
    @epoxyfloortoowoombapro7248 หลายเดือนก่อน

    Your videos are always a pleasure to watch.

  • @AJLaRocque54
    @AJLaRocque54 2 ปีที่แล้ว +1

    Dude! Outstanding. As soon as my printer gets here I will be making your clock. Thanks so much for this video.

    • @Engineezy
      @Engineezy  2 ปีที่แล้ว

      Thanks Joseph! Happy printing 😀

  • @rondoc1936
    @rondoc1936 ปีที่แล้ว

    Thanks!

  • @NonEuclideanTacoCannon
    @NonEuclideanTacoCannon ปีที่แล้ว +3

    When I was a kid there was a book at the bookstore, that was actually a paper clock kit. I always wanted it, parents always said no. It had pages of the same gear shapes, and you were supposed to cut them out, and glue them on top of each other in layers, until you had a gear rigid enough for a clock mechanism. I always thought it was a neat idea. I doubt 8 year old me could have completed the clock, though.

  • @OliviaSNava
    @OliviaSNava 2 ปีที่แล้ว +2

    Could you upload a normal speed video of this running for like an hour or two?
    I’d love to have this just clicking on in the background.
    Maybe a JBV Creative Extra’s channel or something.

    • @Engineezy
      @Engineezy  2 ปีที่แล้ว +1

      Haha I will see what I can do!

  • @MrWolfffgang
    @MrWolfffgang 10 หลายเดือนก่อน

    very nice profund explanations.I once had a company, making mechanical clocks by wood which was a big success. Perhaps i will print our top model exactly 1:1 or with small modifications. One important point is lifetime, where i have a big doubt if printed parts can compete.Our experience of our clocks is more than 30 years and they are still in use.
    Very nice engineering and presentation.

  • @EllenDeGuzman.86
    @EllenDeGuzman.86 4 หลายเดือนก่อน +1

    Im 🤯 Clocks and watches are 👌🏻 Thank you so much for showing each design and breaking it down. Thats why Every clock has a distinct sound. 😎 Awesome!

  • @3DPrinterAcademy
    @3DPrinterAcademy 2 ปีที่แล้ว

    so cool! (p.s. I'm assembling the marble escarpment now)

    • @Engineezy
      @Engineezy  2 ปีที่แล้ว

      Thanks Steven! Let me know how it turns out!

  • @ByronBuildsOfficial
    @ByronBuildsOfficial 2 ปีที่แล้ว

    This is my Christmas break project. Super excited to print and assemble.

    • @Engineezy
      @Engineezy  2 ปีที่แล้ว

      Awesome! Enjoy :) Happy holidays!

  • @mmmp1zza
    @mmmp1zza 2 ปีที่แล้ว +13

    I’ve been really enjoying this series, Jay, and this is a great finale video 🙂
    Couple of requests/ideas for standalone ‘how to’ videos:
    - how are you modelling gears? I’ve found ways, but not yet figured out a good easy way I’m happy with
    - your prints look really smooth - an overview of materials/techniques would be great
    - how do you deal with clearance, especially accounting for different printers?

    • @Engineezy
      @Engineezy  2 ปีที่แล้ว +1

      I appreciate you watching! And the video ideas :) Cheers

  • @Sungazerglass
    @Sungazerglass ปีที่แล้ว

    I was thrilled watching this, and then you added the “flyback” complication. So cool!

    • @Engineezy
      @Engineezy  ปีที่แล้ว

      Thank you! Glad you enjoyed it!

    • @Sungazerglass
      @Sungazerglass ปีที่แล้ว

      Which escapement gives the most satisfying tic-toc?

  • @jetw9522
    @jetw9522 ปีที่แล้ว +3

    Thank you so much, Jay. I find joy watching all your creations. It feels like the childhood that was missing.
    Really appreciate that you are sharing all these with us. Keep enjoying and creating! ❤🙏

    • @Engineezy
      @Engineezy  ปีที่แล้ว +1

      Glad you can enjoy! Thank you, I will 😀

  • @megafonmann
    @megafonmann 2 ปีที่แล้ว +4

    Thanks for this masterpiece! You´ve matched the perfect ratio of entertainment and informations, really enjoyed those 9 1/2 minutes

    • @Engineezy
      @Engineezy  2 ปีที่แล้ว +2

      So glad you enjoyed it!

  • @James68257
    @James68257 10 หลายเดือนก่อน

    That's awesome! So much thought and work must have gone into the project.

    • @Engineezy
      @Engineezy  10 หลายเดือนก่อน

      Thank you! Soo much 🥵🥵

  • @poporbit2432
    @poporbit2432 ปีที่แล้ว

    Fantastic, I've purchased your files and my wife will love the resulting clock. Next step figuring our which color pla to use.

    • @Engineezy
      @Engineezy  ปีที่แล้ว

      Appreciate your support 👊👊

  • @hayfahvytsen
    @hayfahvytsen 2 ปีที่แล้ว +1

    Awesome project. Nicely done!

  • @jonwheatley
    @jonwheatley 2 ปีที่แล้ว

    found my new youtube rabbit hole. This content is incredible.

    • @Engineezy
      @Engineezy  2 ปีที่แล้ว

      Thank you! Glad you can appreciate :)

  • @trangtt2410
    @trangtt2410 ปีที่แล้ว

    This is, like, BEAUTY! I really love it! This is awesome!

  • @TooTallToby
    @TooTallToby 2 ปีที่แล้ว +1

    Great job Jay - been loving this content on clocks and escapements!!

    • @Engineezy
      @Engineezy  2 ปีที่แล้ว

      Glad you've enjoyed it Toby!

  • @dagr8kerek
    @dagr8kerek 2 ปีที่แล้ว

    Oh wow! I didn’t even realize this was finished!! I need to make one!

  • @EvanPang-w4i
    @EvanPang-w4i ปีที่แล้ว

    Wow that’s one way of making a mechanical clock! Very cool

  • @adityakrishna4101
    @adityakrishna4101 2 ปีที่แล้ว

    You nailed it mn! Awesome clock

  • @mocarver
    @mocarver 9 หลายเดือนก่อน

    that's a really neat project - good job

    • @Engineezy
      @Engineezy  9 หลายเดือนก่อน

      Thank you!!

  • @egeoeris
    @egeoeris 2 ปีที่แล้ว +5

    I'm happy to see you tackle clocks, I've been working on a fully radial/symmetric, triple escapement system with an inverted escapement wheel for the better part of a year now It's nice to see others tackling similar mechanisms.

    • @Engineezy
      @Engineezy  2 ปีที่แล้ว +1

      Awesome! Good luck with the design!

    • @egeoeris
      @egeoeris 2 ปีที่แล้ว

      @@Engineezy If you're interested I also work in fusion, I can send you my current progress for inspiration.

  • @dennishines9996
    @dennishines9996 2 ปีที่แล้ว +1

    awesome video, keep up the good work

    • @Engineezy
      @Engineezy  2 ปีที่แล้ว

      Thanks Dennis!

  • @MaxHackbarth
    @MaxHackbarth ปีที่แล้ว +4

    Me actually understanding what is going on as he’s explaining it only too see the outro of a Timelapse of the clock and be like “yeah no”

  • @doublewestern7851
    @doublewestern7851 2 ปีที่แล้ว +2

    Just a tip for gear wear and longevity. It's best for a gear to not have tooth count that are multiply or factor of the other gear's tooth count that it is meshing with. This will promote even wear and minimize weak spot.

    • @tissuepaper9962
      @tissuepaper9962 ปีที่แล้ว +1

      Ideally, the numbers of teeth on the two gears should be "coprime", meaning that their greatest common divisor is equal to 1. This allows every tooth to mesh with every other tooth an equal number of times, causing all the teeth to approach their final "broken in" shape at the same rate.

  • @Tasarran
    @Tasarran ปีที่แล้ว +1

    In all the conventional clockmakers videos I've seen, they seem to be really obsessed with polishing and burnishing every point a metal shaft makes contact. I assume that's to reduce every little bit of torque reduction along the chain...
    Also, did you use any oil at all?

    • @Engineezy
      @Engineezy  ปีที่แล้ว +1

      That’s exactly right, this clock isn’t the most accurate for this reason. I used lithium grease on all the gears!

  • @ideaynojodas
    @ideaynojodas 2 ปีที่แล้ว

    Sir.. you are a MASTER! Well done!

  • @nicksantitoro
    @nicksantitoro ปีที่แล้ว +1

    Any more clock designs coming soon? It would be awesome to see some of your escarpments in an entire clock.

    • @Engineezy
      @Engineezy  ปีที่แล้ว

      Actually working on something for my next video! But I don’t think it will be what you’re expecting 😁

  • @stratusandco
    @stratusandco 2 ปีที่แล้ว

    I plan to start my own mechanical watch company and I know soon, I will offer special thanks to you

    • @Engineezy
      @Engineezy  2 ปีที่แล้ว

      Amazing! Looking forward to seeing it!

  • @cheesypufs
    @cheesypufs ปีที่แล้ว

    Unbelievably amazing!

  • @maxh4942
    @maxh4942 4 หลายเดือนก่อน

    Man I wish I had one of these this is amazing

  • @RoccosStuff
    @RoccosStuff ปีที่แล้ว

    Wow, super cool use for 3d printing

    • @Engineezy
      @Engineezy  ปีที่แล้ว

      🙌🙌👊👊

  • @takacsi
    @takacsi 11 หลายเดือนก่อน

    I dont know if I ever will be able print this, but this is the content why I have YT subcriptions, and I will buy the model from your site! Amazing, than you!

    • @Engineezy
      @Engineezy  11 หลายเดือนก่อน

      Appreciate it!! 👊👊👊

  • @psyfusion
    @psyfusion 2 ปีที่แล้ว

    Yet another great design

    • @Engineezy
      @Engineezy  2 ปีที่แล้ว

      Thanks Gary!

  • @herzogsbuick
    @herzogsbuick ปีที่แล้ว

    that was a treat, those escapements are incredibly creative.

    • @Engineezy
      @Engineezy  ปีที่แล้ว +1

      Thanks Jay! Great name btw

    • @herzogsbuick
      @herzogsbuick ปีที่แล้ว

      @@Engineezy yours too! it's not bias either, it's just plain fact.

  • @sikfreeze
    @sikfreeze 2 ปีที่แล้ว

    These are super impressive

  • @lmarquis518
    @lmarquis518 2 ปีที่แล้ว

    Just purchased the file and about to start printing on my Bambu X1! Your channel is awesome 👏🏽

    • @Engineezy
      @Engineezy  2 ปีที่แล้ว

      Thanks Logan! Enjoy the build!

  • @SaftTechnologies
    @SaftTechnologies ปีที่แล้ว

    This was a very useful video. I appreciate the tips! The brass insert was particularly useful.

  • @AndyScott
    @AndyScott 2 ปีที่แล้ว +5

    Fantastic work! I've heard many of these timepiece terms before but this does a great job in defining them visually for me. Appreciate the content. Gained a new subscriber 🙂

    • @Engineezy
      @Engineezy  2 ปีที่แล้ว

      Thanks Andy!!

  • @inertproductionsalternate9114
    @inertproductionsalternate9114 ปีที่แล้ว +2

    You should try to make a 24hr mechanical clock

  • @braydenmilburn9279
    @braydenmilburn9279 10 หลายเดือนก่อน

    I am currently saving up money to get a 3-D printer, and it is going to be the Bambu Labs X1 Carbon, when I do get this new printer I am going to probably try to print your clock so I can put it above my 3-D printer or in my room somewhere! I really love how it looks and how you can tell time with it! It is also really cool how you explained the escapement mechanism, it makes complete sense when I listen to you explain it very clearly. I love your clock, and I will try printing it love your videos man. You should do another video like this!

    • @Engineezy
      @Engineezy  10 หลายเดือนก่อน

      Glad you enjoyed this :) happy printing!

  • @Robinson8491
    @Robinson8491 3 หลายเดือนก่อน

    Dude this is amazing

  • @JasonLambert-d7d
    @JasonLambert-d7d 10 หลายเดือนก่อน

    Dude this is god dam amazing! great work. I've never 3D printed anything but I have access to some printers and I've always wanted a clock like this!

    • @Engineezy
      @Engineezy  10 หลายเดือนก่อน

      Thank you!!

  • @zer0her058
    @zer0her058 5 หลายเดือนก่อน

    Another thing you can do to increase the run time of the clock that doesn’t involve adding more string and elevating the clock higher and higher is to add additional gear mechanisms for days or weeks or even months and use a reduction gear to provide the torque to keep the clock running without increasing the weight used. Meaning its possible to make a clock that runs for an entire year off of a single wind up.

    • @Engineezy
      @Engineezy  5 หลายเดือนก่อน

      That would be sick! Gonna have to try that on the next one

  • @aiocafea
    @aiocafea 5 หลายเดือนก่อน

    0:28 minor thing but the analog to the potential energy stored by the weight+height would be the energy in the battery, not the power provided by the motor

  • @noelaruldas1152
    @noelaruldas1152 ปีที่แล้ว

    Thank you very much for your demonstration and explanation!

    • @Engineezy
      @Engineezy  ปีที่แล้ว +1

      Glad you enjoyed!

  • @Rouverius
    @Rouverius ปีที่แล้ว +1

    I'm naturally thinking about Thomas Jefferson's Great Clock that used cannonball weights. But, he had to cut holes in his floor to get it to run multiple days.
    The retrograde minute display is a really nice touch.

    • @Engineezy
      @Engineezy  ปีที่แล้ว +1

      Definitely a similar vibe! Thank you 👊

  • @Daniel_Wolf
    @Daniel_Wolf ปีที่แล้ว

    Genius!. Grettins from Argentina

    • @Engineezy
      @Engineezy  ปีที่แล้ว

      Thanks Daniel!

  • @TonyDrecaps
    @TonyDrecaps 2 ปีที่แล้ว

    Great job! I like the explanations & the numerical dials at the end

    • @Engineezy
      @Engineezy  2 ปีที่แล้ว +1

      Thank you!

  • @Mysda_
    @Mysda_ 2 ปีที่แล้ว

    Thats very cool, well done

    • @Engineezy
      @Engineezy  2 ปีที่แล้ว +1

      Thank you!

  • @joshuameldru4004
    @joshuameldru4004 2 ปีที่แล้ว +1

    So cool, looks like so much fun to make! It’s obvious you have a joy for thoughtful building!
    I bet this project really took some time to make, hahaha!! Get it!!
    Great great video and thank you for sharing

    • @Engineezy
      @Engineezy  2 ปีที่แล้ว

      😂😂😂 thanks Joshua!

  • @useazebra
    @useazebra 2 ปีที่แล้ว +1

    $7 for an STL is a steal.
    But I would pay $200+ to follow you in an instructional video series stepping me through how to make one of these in a CAD program.

  • @TimolaTesla
    @TimolaTesla 9 หลายเดือนก่อน +2

    In the video you said: "If your clock is running to fast, rise the pendulum. If it's running to slow lower it down" This is a mistake. Making the center of pendulum mass lower makes pendulum oscilation slower, and making it higher makes it faster.

  • @thecasualengineer99
    @thecasualengineer99 2 ปีที่แล้ว

    That minute hand is a nice retro touch

  • @cleisonarmandomanriqueagui9176
    @cleisonarmandomanriqueagui9176 ปีที่แล้ว

    Magnificent ... I 'll made mine , superb . Greetings from Peru arequipa

  • @Cole_Bradshaw
    @Cole_Bradshaw ปีที่แล้ว +2

    If I buy the clock files to print do I get instructions on how to put the clock together?

    • @Engineezy
      @Engineezy  ปีที่แล้ว

      Of course! Theres a full video on my second channel th-cam.com/video/MHcIQam6HsQ/w-d-xo.html

    • @Cole_Bradshaw
      @Cole_Bradshaw ปีที่แล้ว

      Ok thx

  • @jamesworth378
    @jamesworth378 หลายเดือนก่อน

    You just got me into 3D printing

    • @Engineezy
      @Engineezy  หลายเดือนก่อน

      LFG

  • @donaldasayers
    @donaldasayers ปีที่แล้ว

    Great clock. Clocks are tricky things to make.

  • @BoolrVids
    @BoolrVids 2 ปีที่แล้ว

    It's astonishing to me that you don't have millions of subs. Since subscribing, each time you post a video there's always something unique & even more interesting than the last.

    • @Engineezy
      @Engineezy  2 ปีที่แล้ว +1

      Appreciate it 👊👊

  • @mikejward
    @mikejward ปีที่แล้ว

    Brilliant. Saw an exhibit at the British Museum on the history of clocks. This would fit in well. 🙂

    • @Engineezy
      @Engineezy  ปีที่แล้ว

      Haha definitely could 😀

  • @bitzbox
    @bitzbox ปีที่แล้ว

    Absolutely incredible

  • @TheGoldPoppy
    @TheGoldPoppy ปีที่แล้ว

    Hey JBV!!!! I have an idea!!! you should make a chime of some kind. you could make it easy like just hitting a little bell with the minute hand every hour when it resets. Or you could make it your next serious project and design a wall mounted full chime that can ding once for every hour shown on the clock.

    • @TheGoldPoppy
      @TheGoldPoppy ปีที่แล้ว

      i bought your design and i love it. but i miss the chime.

    • @Engineezy
      @Engineezy  ปีที่แล้ว

      I challenge you to add one!

  • @andrerochachaves
    @andrerochachaves ปีที่แล้ว

    I Can't imagine How many times he had to re-print a piece or How many hours he spent srudying the Clocks mechanism.
    I respect this video!

  • @mumtazparveen1898
    @mumtazparveen1898 ปีที่แล้ว

    The Most Bazar CLOCK & Amazing 1:29 😸

  • @nighthawkj30A4
    @nighthawkj30A4 ปีที่แล้ว

    8:27 the clock you made reminds me of Time Piece from Castlevania symphony of the Night.

  • @ed94ro99
    @ed94ro99 8 หลายเดือนก่อน

    Earlier i was thinking about how doors with those boxes and arms attached to close themselfs probably see a lot of use. I was kept awake thinking you can probably link the wind up components of a clock like this to a door that sees alot of use so it can consistently be wound passively.

  • @ScottCalvinsClause
    @ScottCalvinsClause ปีที่แล้ว

    I would put a little bell on the zero-minute that way when the dial snaps back, you get a chime for the hour.

  • @theofficialczex1708
    @theofficialczex1708 2 ปีที่แล้ว +2

    8:33 I think you meant to say it the other way around. If the clock runs fast, the pendulum weight should be lowered to increase the period, and vice versa.

    • @Engineezy
      @Engineezy  2 ปีที่แล้ว +1

      Yess omg! My bad, good catch

    • @matemaciek
      @matemaciek 2 ปีที่แล้ว

      That got me confused also (-:

  • @Runedragonx
    @Runedragonx 3 หลายเดือนก่อน

    Idea for the minute face, leave a line for each quarter phase and a dot for each 5-minute phase, it should read (0| • • | • • | • • | • • |60), or use a bold dot for the quarter and a small dot for the 5s, reading (0• · · • · · • · · • · · •60)

  • @Geckur0
    @Geckur0 7 หลายเดือนก่อน

    this is like the "3d print a gun" thing. very interesting, i cant wait to see what people try to 3d print next.

  • @mradar5913
    @mradar5913 ปีที่แล้ว

    Wow! Great work.

  • @TheRealStructurer
    @TheRealStructurer 2 ปีที่แล้ว +1

    Very nice and inspiring! Thanks for sharing 👍🏼

    • @Engineezy
      @Engineezy  2 ปีที่แล้ว +1

      Glad you enjoyed!

  • @americanmichigander
    @americanmichigander 2 ปีที่แล้ว +1

    Couldn't you make it run longer with a few pulleys connected to the weight string?

    • @sebastienroche392
      @sebastienroche392 2 ปีที่แล้ว

      I was thinking the same. I suppose that Yes.

    • @Engineezy
      @Engineezy  2 ปีที่แล้ว

      It's a yes but you would need to add more weight!