This makes removing the front bumper SO much easier. www.ft86speedfactory.com/move-... -------- Instagram - / ft86speedfactory Facebook - / ft86speedfactory
This looks a lot like the Quik-Latch quick disconnect brand. They make the same thing to keep carbureted air filters secured without leaving an exposed bolt or nut showing.
Looks very useful but if that price shown is any indication, these are too expensive given the cost of manufacture and materials used which equate to two 4 bolts, a handful of washers and a decorative top. I just cannot personally justify paying more than ¥6000-¥8000 for these. I hope to find them at a lower cost later.
They look good and all but it seems like people have forgotten that there is military grade quick latch hardware at an affordable price point: DZUS Fastener. They are cheap and work very well. They are also weigh very little.
@@wajalama no sorry, these particular latches cost $25-35usd each. There are counterfeits of our products so BEWARE, they will only latch a few times and then garbage. The copy cat versions are not covered under our Lifetime Warranty either, so buyers beware we will not replace any counterfeit products. Our Latches are made from CNC Machined T6 6061 Aluminum made in the USA with a Limited Lifetime Warranty
@@artbycapone2710 The dzus requires a tool to remove every time. At the track we need things done fast and efficiently with the least amount of tools required to take off body parts. An example is that Hypercars like the McLaren P1 GTR use our latches on their body panels. Soon to be used by Lamborghini also
Quick question bro I have a clk500 and I’m going to be getting a customized after market bumper and I don’t want to have to add brackets and do all the extra work that needs to be done you think if I use this quick release set up the bumper will hold up with just the quick release set up or ?
It's mostly to make sure the bumper fits correctly. If you look at basically ANY FR-S, BRZ, or GT86, you'll see the bumper doesn't fit correctly next to the headlight, in front of the wheel arch. Older models show it worse usually.
Awesome video! What about the other bolts. Do these become a quick release, but you still need to unscrew all the rest of it? P.S. Something's off about the video quality.
Depends on what kind of driving you're doing. If you're taking the bumper on and off a frequently, loading the car on a trailer, drifting, taking it off at a show, you could just use the Quick Disconnect mounts, but if you're going to drive for a while on the interstate, there may be some flapping if the under panels aren't tucked in.
Hey I’m 17 and getting a brz very soon and I’m stoked! But I’m getting new rims as soon as I get it but I have no clue what im looking for I want wider tired but I have no clue where to start any help would be appreciated, thank you!
The max size we recommend is 18x9.5 +38mm wheel with a 255/35/18 tire. You may also want to watch out wheel fitment guide to get a better understanding of wheel sizes. th-cam.com/video/k1ToBRfw7jw/w-d-xo.html
I was looking to buy this, but when I saw $215! I backed off, that's A LOT for 4 bolts. I will have to look somewhere else or look another alternative, but I'm not paying $215 for bolts
Bro I love you guys and the pricing for most products but your customer service is abysmal. To wait over 24 hours for an email response with no number to call or anything is pretty ridiculous. Not trying to hate I just want you guys to improve you customer experience.
I remove my bumper every time I take my BRZ off road. I never plan for it to come off. It just usually ends up that way after it swallows a rock or a bush. 😂
@@cyrus.gonzales Just be ready to fight the dealership tooth and nail. They will find any and every reason to avoid fixing their mistake. Even if you show them "proof" it doesn't mean they will accept it.
*my $800 dollar bumper is too expensive to install an easy theft system on it. im keeping my screws and nuts. They wont be able to steal that without jacking the car up. $800 dollar just because its true carbon fiber. hit a chunk of ice at 30mph and plow through snow and not even a scratch.*
@@FTspeed the bolts that are already holding the bumper could have been the quick disconnect fitting that way you wouldn't need to drill extra holes. That's how the legit kits do it
On the FT86 platform they're super convenient. Not only do they re-align the bumper properlt you no longer have to remove the side signal light which is a bitch every time you remove and install the bumper. You simply disconnect the wire clip and remove bumper, light stays put
"yep, it's not going anywhere". It's not done unless this is said
Where did $215 come from im sorry thats expensive af lol
Are the charging for the machine that made them. Like damn haha
dammmm, i think i'll just use some bolts and nuts.
Damn $215 for a $10/$20 kit is a bit expensive 😅
I saw this on another channel before. But I'm glad you guys are showing it!
This looks a lot like the Quik-Latch quick disconnect brand. They make the same thing to keep carbureted air filters secured without leaving an exposed bolt or nut showing.
$20 rubber band ones that are not as nice, or $215 for something that is nicer but does literally the exact same thing. You decide
For sure saving up for these after the current mods I’m saving for! My front bumper has never fit the proper way after having removed it a few times!
eBay $20 bucks.... Same shit
Wrx? What kind of car?
subae FR-S
Hey so what was the name of the air freshener you guys used to send in with products when we ordered. I have only one left and I’d like to get more
Looks very useful but if that price shown is any indication, these are too expensive given the cost of manufacture and materials used which equate to two 4 bolts, a handful of washers and a decorative top. I just cannot personally justify paying more than ¥6000-¥8000 for these. I hope to find them at a lower cost later.
I'm pretty sure they sell the same exact thing on ebay for like, $20 bucks haha
They look good and all but it seems like people have forgotten that there is military grade quick latch hardware at an affordable price point: DZUS Fastener. They are cheap and work very well. They are also weigh very little.
@@wajalama no sorry, these particular latches cost $25-35usd each. There are counterfeits of our products so BEWARE, they will only latch a few times and then garbage. The copy cat versions are not covered under our Lifetime Warranty either, so buyers beware we will not replace any counterfeit products.
Our Latches are made from CNC Machined T6 6061 Aluminum made in the USA with a Limited Lifetime Warranty
@@artbycapone2710 The dzus requires a tool to remove every time. At the track we need things done fast and efficiently with the least amount of tools required to take off body parts. An example is that Hypercars like the McLaren P1 GTR use our latches on their body panels. Soon to be used by Lamborghini also
Quick question bro I have a clk500 and I’m going to be getting a customized after market bumper and I don’t want to have to add brackets and do all the extra work that needs to be done you think if I use this quick release set up the bumper will hold up with just the quick release set up or ?
You think you can do an install and review on the Crawford intake spacers and the torque solutions throttle body spacers?
Please 😇
The document from Move Over Racing now only has the first page, the rest of the document is missing.
Stupid question? But can they hold abit of weight? As my bracket on bumper is basically gone an too weak, an keeps falling
Where did you guys get the angle grommets?
These look a lot like the quik-latch I use on my bumper just way more expensive.
The poor souls who bought that expensive one probably didn't know any better. The thing probably costed them a few dollars to make
Hey, the install manual link is broken on your store page. it just links to an image of the first page of the PDF. not the whole thing. help?
Does this work on any type of cars ?
Do you guys sell upgrades for the auto trans
Great Video Guys!!!
How difficult is it to remove the bumper, and how often do you remove it that you find it necessary to install discos?
It's mostly to make sure the bumper fits correctly. If you look at basically ANY FR-S, BRZ, or GT86, you'll see the bumper doesn't fit correctly next to the headlight, in front of the wheel arch. Older models show it worse usually.
Hi bro.where can i get that item bro ?
Awesome video! What about the other bolts. Do these become a quick release, but you still need to unscrew all the rest of it?
P.S. Something's off about the video quality.
Depends on what kind of driving you're doing. If you're taking the bumper on and off a frequently, loading the car on a trailer, drifting, taking it off at a show, you could just use the Quick Disconnect mounts, but if you're going to drive for a while on the interstate, there may be some flapping if the under panels aren't tucked in.
Where can i buy this in the Philippines?
You only included 1/20 pages of their install manual on your website btw...
Ok but what about the disconnects from Move Bitch Get Out The Way Racing?
Do you have to reconnect the brackets holding the bumper in the front?
nope
Does the bumper sag still exist for the 2017+ models? Id love to hear more on your experiences with it and what you do about it
Ours hasnt really had the sag problem, but these quick disconnect would fix it if it did.
Does this sill work if my bumper is made of iron?
100%
By any chance, can you make another one for the rear bumper?
We're going to be running the 2018 brz bumper on this car. Which is the one I installed the quick disconnects on.
We have those too!
Hey I’m 17 and getting a brz very soon and I’m stoked! But I’m getting new rims as soon as I get it but I have no clue what im looking for I want wider tired but I have no clue where to start any help would be appreciated, thank you!
The max size we recommend is 18x9.5 +38mm wheel with a 255/35/18 tire. You may also want to watch out wheel fitment guide to get a better understanding of wheel sizes. th-cam.com/video/k1ToBRfw7jw/w-d-xo.html
look up fitment industries they have a huge gallery and help for your exact issue.
@@alexelder9600 thank you very much, I appreciate it
Update: I got my car and couldn’t be happier, 2013 grey brz with 37k miles got it for 16k and man it was worth it, it’s perfect.😁😁😁
Did you guys move your warehouse to Utah?
We do have another warehouse in Utah to cut down shipping times. But the shop where we make all our videos is still here in Iowa.
I love this video, more like this
do you get sag on the newer 2017+ cars?
Christopher Hernandez ours doesn’t have it a the moment.
not yet :D got it Oct. 2016
I was looking to buy this, but when I saw $215! I backed off, that's A LOT for 4 bolts. I will have to look somewhere else or look another alternative, but I'm not paying $215 for bolts
Amazons like $14 for 2 haha
Bro I love you guys and the pricing for most products but your customer service is abysmal. To wait over 24 hours for an email response with no number to call or anything is pretty ridiculous. Not trying to hate I just want you guys to improve you customer experience.
Hell yea!
I gotta do this with my G37
$215? i can get the exact thing on amazon for $20
I don’t see where the quality is up to 200 for these
Does one side*****
Anddddd there you go folks. 😅😅 you’re done. Enjoy the rest of your day. 🐙
UNCIVILIZED JAMAICAN haha for when you only need to be half as quick 💀
Does he really need to do both sides for you?
Woe do you really need to make that comment?
Wow that’s esphensive. I mean, it does look really convenient tho
Eshhhppenshhhive
Egspencyve
Ebay has them for $34 Aud and funny enough they work just as well..
I remove my bumper every time I take my BRZ off road. I never plan for it to come off. It just usually ends up that way after it swallows a rock or a bush. 😂
Getting my quick releases to unbutton is difficult
It may simply need adjusting or shoot us an email, we will be happy to help. They come with a Lifetime Warranty. Moveoverracing@gmail.com
I need one for a 370 z
I'm saving for some milspec hardware. They come with locks
Anyone else having issues with their 2013 Scion FR-S and Subaru BRZ after doing the recall?
Cyrus Gonzales my shit had so much smoke from the engine bay, and went inside my car from the vents🤦🏻♂️ they told me to drive through it smh
There are several threads on it the forums. So much so that other sites are starting to pick it up!
Mr. Wiggles yeah I saw all the forums. I saw it on a Facebook group and on an Instagram as proof. I submitted it all as proof to the dealership.
@@cyrus.gonzales Just be ready to fight the dealership tooth and nail. They will find any and every reason to avoid fixing their mistake. Even if you show them "proof" it doesn't mean they will accept it.
Mr. Wiggles yeah they were the last people to touch it. I had no issues until after the recall
Thomas the goat
That mark up tho 👀
its funny cause i think hes trying not to laugh at all the usage of the words balls and rod
lmao
Where are the April products 😭😭😭
I need that Video Thomas
It’s coming.
We’re going out to film the first Gridlife race at Mid Ohio this weekend. So shortly after that
af
p.s clean
This product is $27 at Quik Latch
5:24 your only aloud to say that when strapping something to a trailer
That price tho!!!!
You need the rubber bands then brotha, they're only like 10$ Made in China perfect for your build
No lie I found the same product less the 30 bucks....I was like wtf ft86speedfactory is fucking us up 😂
The profit margins tho.... let me get 50% of the company with 10% royalty for every unit sold or your dead to me
They’re rusted bad (after 6 years) and won’t completely come off!! These suck!!
215$ for some bolts and anodised aluminium toppers LMFAO
$215... it cost $2 to make...
*my $800 dollar bumper is too expensive to install an easy theft system on it. im keeping my screws and nuts. They wont be able to steal that without jacking the car up. $800 dollar just because its true carbon fiber. hit a chunk of ice at 30mph and plow through snow and not even a scratch.*
Odd flex
"Should take an hour and a half" me looking at my audi a4 b5...
Bro please nobody buy these from this website 😭 in what world would a couple screws and bolts cost $200. Go to eBay
$215 dollars for that??? Lmfao yeah fucking right
$250, screw off!
Wow! $215 for those stupid buttons? I can just buy a brand new bumper!
$200+ and I have to drill holes in my bumper... No thanks
How else do you expect there to be a quick disconnect? 😅
@@FTspeed the bolts that are already holding the bumper could have been the quick disconnect fitting that way you wouldn't need to drill extra holes. That's how the legit kits do it
And I am asking myself all the time, why should I do this 😂😂
On the FT86 platform they're super convenient. Not only do they re-align the bumper properlt you no longer have to remove the side signal light which is a bitch every time you remove and install the bumper. You simply disconnect the wire clip and remove bumper, light stays put
Too much yak yak
Those cheap shit ass push buttons! Lost a bumper at the track. Cant beat DZUS fasteners
215$ for that bro are you serious ebay for life
😂