I got the same setup, but with a ported + balanced true 85cc (110cc). Pwk 21, shift kit, mz65 clone (nasty jack). I'm just in the final stages of assembly. After watching this video, now I can't wait to ride it. 😍 What is the cc of the pk80?
That's great. You are going to love it. I have the falcon 911 nikasl plated cylinder. I can't remember what CC it is. I think it's around 90cc but I may be wrong.
How many kms does it pull ? ? ? { if you run a smart phone app, start a trip meter , it will give you top speed , average speed , ect) Sweet ride and very impressive disc brake stopping power👌2:39
I will have to test one day with an app but my buddy cruised along side me and i was doing around 85km/h on a flat before i added the falcon 911 and bigger intake and carb. So it should get over 90km/h on a flat surface, but thats really too fast for a bicycle. Check out my other channel dedicated to this bicycle. youtube.com/@MotorizedBicycle1?si=zkn-Hxvueg4D_BfH
Nice ride bro 🔥💨💨💪 where did you get that silencer for the MZ pipe ? Also Did the silencer slip right into the MZ pipe or you had to do some modifications?
It's a universal carbon canister from aliexpress. Made a stainless adapter plate to fit it to the mz pipe. Both silencer and mz are 22mm if I remember correctly.
I am a fan of this type of videos of motorized bicycle with jack shaft and to improve it is a video driving as it is due to and something else scared the truck hahaha
I thought that the bakkie (truck) was parked in the driveway and I didn't see anyone in the vehicle. That's was really a miracle for me. I don't know how I stopped so fast.
@LoadingHB i used two Topeak defender fenders. Standard fitment on the front. For the rear i only the rear portion of a Topeak defender front mudguard, i then used a cheap aliexpress universal rear fender and some fabrication with aluminium flat bar with which i made i custom rear fender.
I am busy creating a new channel which will be dedicated to motorized bicycles. Mods, upgrades, ride alone videos. Subscribe so long if you are interested. Videos will come in the near future. youtube.com/@MotorizedBicycle1?si=zkn-Hxvueg4D_BfH
@@FishingEasternCapeSA the spring sounds like a good idea. I tried those black rubber pads with white string in them. They suck. They look like they're made from old tire rubber. Btw... The bike sounds amazing! 👍✌️
I use the pink Chinese pads. Spring is a must as it kept slipping. I also cut grooves in the clutch pressure plate, similar to what you see with car clutches. It has never slipped since but I think the spring is what helped the most.
Can you tell me how to route that carb? I'm confused what those 2 brass nipples on opposite ends are for.... leave it alone? Plug it up? Route hoses from it?
i think you may be speaking about the power jet circuit. The two brass nibble need to be piped together. Google OKO 21mm diagram and you will find a description.
@@FishingEasternCapeSA OK, how do I make the throttle cable fit? It isn't long enough to stick it in the slide, even if the spring is compressed entirely! Even if I'm able to fit it in, wouldn't the spring be too compressed to wear I cant even give it any throttle input? Did you cut the spring?
UPDATE : I took off the cable at the throttle tube side and fitted the carb end first.... but then when I went back to try and install the cable at the throttle tube, it's too short now. How do people with oversized carbs make the cable work?
@@tonykartracer8032 i got a cable made to custom length. We have a local cable repair shop. My cable was also the incorrect length. I think mine was too long if I recall correctly. Just as long as you are completely adjusting all adjustments point all the way in, if you still can't get it to on then make the core a bit longer.
@@FishingEasternCapeSA Was wondering how everyone with aftermarket oversized carbs got their cable to work properly.... I suppose everyone had to have their custom made to length. Just thought there was an easier solution that I missed out on. Anyway, thanks for the help man, I appreciate it!
That exhaust has to burn the piss out of you all the time* and what is going on with that clutch box? I've never seen one with an exterior cover attachment that seems to create a chain shaft extension adapter.. wHaT iS tHaT caLleD {{I saw your jackshaft video}}
The cover is just a guard for the jackshaft sprocket. The exhaust doesn't get hot enough to burn. I can touch it with my hand even after a long ride on a hot day. So never had an issue.
It's South Africa so it's the correct side of the road. I did see the bakkie (truck) but I thought it was parked. I didn't run into the truck, it pulled out in front of me. It's always easy to judge when you sit there watching the footage afterwards, but you make incorrect assumptions.
Dude that build is a beauty!
Thanks bud. Check out my other channel dedicated to this motorized bicycle youtube.com/@MotorizedBicycle1?si=zkn-Hxvueg4D_BfH
That's the ultimate fishing mobile that will get you everywhere in a little creek
That is one adventurous vid mate! Great job on the build, that thing sounds like 250cc two stroke racing machine.
Lekker bud glad you enjoyed it. Check out my other channel dedicated to this bicycle if you like: www.youtube.com/@MotorizedBicycle1
@@FishingEasternCapeSAhow much is jackshaft an gears so u can shift
@demonic2534 unfortunately cant buy anymore. Sickbikeparts.com closed for good. Future builds need full custom fabrication.
Great video bro you got lucky that crash wasn’t worse
For sure man! I thank God for His hand in my life, always.
Definitely bro I build bikes to there a blast stay safe bro
@@Littleevil9975 thanks, you too ☺️
Welcome bro and will do
love the build nice work!
Thats a super nice bike and sounds just as good.
Great work.....
thanks bud
Started the video with my riding nightmare. Good 👍
I got the same setup, but with a ported + balanced true 85cc (110cc). Pwk 21, shift kit, mz65 clone (nasty jack). I'm just in the final stages of assembly. After watching this video, now I can't wait to ride it. 😍
What is the cc of the pk80?
That's great. You are going to love it. I have the falcon 911 nikasl plated cylinder. I can't remember what CC it is. I think it's around 90cc but I may be wrong.
That bike is just about perfect. Great job! Ant work done to the internals?
Upgraded sealed bearing in the clutch, replaced all those loose ball bearing. Everything else is basically bolt on parts. Standard PK80 crank.
A1 golden bro sounds f****** sweet too bad there wasn't any Creeks around your place where you could show us how good climbs basic little hills
Great video close call great job on the bike
Thanks buddy!
That’s sick I hope to get my built up like that
Great video that cylinder is pretty good! Gotta pay close attention to everyone else out there. Happy new year bud 🚴💨💨💨
Thanks. Happy New year to you too! Yes the flacon 911 is really awesome. Proper quality.
Thanks for the ride.
How many kms does it pull ? ? ? { if you run a smart phone app, start a trip meter , it will give you top speed , average speed , ect)
Sweet ride and very impressive disc brake stopping power👌2:39
I will have to test one day with an app but my buddy cruised along side me and i was doing around 85km/h on a flat before i added the falcon 911 and bigger intake and carb. So it should get over 90km/h on a flat surface, but thats really too fast for a bicycle. Check out my other channel dedicated to this bicycle.
youtube.com/@MotorizedBicycle1?si=zkn-Hxvueg4D_BfH
Thanks for the ride. Godspeed
Nice ride out...thank God you ok bud
For sure! It could have been bad 🙏🏼🙏🏼🙏🏼
Dam that bike is sick lucky you ain't get hurt ot mess your bike io when I got hit completely ruined my front wheel
Sounds great, what engine
Thanks Jeff. It is based on a PK80. Major mods are described in the video.
Nice ride bro 🔥💨💨💪 where did you get that silencer for the MZ pipe ? Also Did the silencer slip right into the MZ pipe or you had to do some modifications?
It's a universal carbon canister from aliexpress. Made a stainless adapter plate to fit it to the mz pipe. Both silencer and mz are 22mm if I remember correctly.
And I shortened and repacked the silencer. New staines steel rivets and better packing.
Seems nice, how many kilometers can it do before needing a refill?
haven't measured yet but obviously will vary a lot depending on what speed im doing
I am a fan of this type of videos of motorized bicycle with jack shaft and to improve it is a video driving as it is due to and something else scared the truck hahaha
Would that installation of changes wear out the bike chain more? And how often will you need to change it?
i use a kmc ebike chain. Haven't needed to replace it yet and still not showing much wear. They are very strong
Sounds nice seems fast .. falcon911???
yes falcon 911. really good cylinders
@@FishingEasternCapeSA wen they restock on Ebay I plan on getting 1 ...sold out reed type ..like urs rn
How much is jackshadt kit with gears
Cant buy them anymore. Sickbikeparts.com closed down. You have to custom fabricate now.
2:39 What hapen You not see the pickup truck come out
I thought that the bakkie (truck) was parked in the driveway and I didn't see anyone in the vehicle. That's was really a miracle for me. I don't know how I stopped so fast.
@@FishingEasternCapeSA adrenaline make You stop fast
it was parked halfway in the driveway
Where ya get the tank decals?
I made them, cut the out of vinyl and used stickers I had from a drone shop called flying robot.
What fenders are those?
@LoadingHB i used two Topeak defender fenders. Standard fitment on the front. For the rear i only the rear portion of a Topeak defender front mudguard, i then used a cheap aliexpress universal rear fender and some fabrication with aluminium flat bar with which i made i custom rear fender.
Does one need a license
I am busy creating a new channel which will be dedicated to motorized bicycles. Mods, upgrades, ride alone videos. Subscribe so long if you are interested. Videos will come in the near future. youtube.com/@MotorizedBicycle1?si=zkn-Hxvueg4D_BfH
What kit did you buy?
It's a sick bike parts kit.
I need to know what engine this is that allows u to use the bikes gears
Sickbikeparts jackshaft kit on a pk80 motor with a LOT of upgrades and custom work .
Are you using stock clutch pads? 👍
Im a using slightly upgraded Chinese pads with a custom updraded spring. Much stronger spring.
@@FishingEasternCapeSA the spring sounds like a good idea. I tried those black rubber pads with white string in them. They suck. They look like they're made from old tire rubber.
Btw... The bike sounds amazing! 👍✌️
I use the pink Chinese pads. Spring is a must as it kept slipping. I also cut grooves in the clutch pressure plate, similar to what you see with car clutches. It has never slipped since but I think the spring is what helped the most.
That's for the info
Can you tell me how to route that carb? I'm confused what those 2 brass nipples on opposite ends are for.... leave it alone? Plug it up? Route hoses from it?
i think you may be speaking about the power jet circuit. The two brass nibble need to be piped together. Google OKO 21mm diagram and you will find a description.
@@FishingEasternCapeSA OK, how do I make the throttle cable fit? It isn't long enough to stick it in the slide, even if the spring is compressed entirely! Even if I'm able to fit it in, wouldn't the spring be too compressed to wear I cant even give it any throttle input? Did you cut the spring?
UPDATE : I took off the cable at the throttle tube side and fitted the carb end first.... but then when I went back to try and install the cable at the throttle tube, it's too short now. How do people with oversized carbs make the cable work?
@@tonykartracer8032 i got a cable made to custom length. We have a local cable repair shop. My cable was also the incorrect length. I think mine was too long if I recall correctly. Just as long as you are completely adjusting all adjustments point all the way in, if you still can't get it to on then make the core a bit longer.
@@FishingEasternCapeSA Was wondering how everyone with aftermarket oversized carbs got their cable to work properly.... I suppose everyone had to have their custom made to length. Just thought there was an easier solution that I missed out on. Anyway, thanks for the help man, I appreciate it!
Where did you get that custom piston sleeve with the reed valve built in?
Ebay. Its a Falcon 911. Made in brasil. High quality nikasil plated cylinder.
Top speed and mpg?
90km/h on a flat. Never measured fuel consumption. Its not light on fuel though.
You have good brake thanks god
We're is this?
Eastern Cape South Africa 🇿🇦
@@FishingEasternCapeSA 👍
What is your top speed ? cause it looks like your going at least 40mph
That exhaust has to burn the piss out of you all the time* and what is going on with that clutch box? I've never seen one with an exterior cover attachment that seems to create a chain shaft extension adapter.. wHaT iS tHaT caLleD {{I saw your jackshaft video}}
The cover is just a guard for the jackshaft sprocket. The exhaust doesn't get hot enough to burn. I can touch it with my hand even after a long ride on a hot day. So never had an issue.
I need that bike damn
крутой байк !!!
Muito top
😮
Luckily you have disc brakes that crash couldve been way worse 😅
Very true!
I would have handle that white truck deal completely different.
Well we have to forgive and forget brother. God determines the day we die 🙏🏼 can't live this life in conflict. Peace and love in Jesus.
@@FishingEasternCapeSA Amen.
I saw that from a mile away...
Riding on the wrong side of the road come on dude how did you run into that truck wtf😂
It's South Africa so it's the correct side of the road. I did see the bakkie (truck) but I thought it was parked. I didn't run into the truck, it pulled out in front of me. It's always easy to judge when you sit there watching the footage afterwards, but you make incorrect assumptions.
Compa I see what you do and I do the same but I jit the car
Sorry brother
It's a Ripper
You could’ve easily went around the truck.
Sure bud 😆
Bro i would kill for that bike
You can make one 😊
Death mobile
They are dangerous yes but I suppose all bikes are.
You could avoided that crash if you were paying attention
I thought the bakkie was parked in the driveway with nobody in it.
true but the driver should have looked