Ur professors goal is to introduce you to the lecture, I don’t think they’re trying to make you get it, if you get it you get it, if you don’t review it. Sadly
I have a biomedical electric circuit exam, I did take 8 lessons this semester and 4 weeks till midterm passed like racing.. I am really grateful to you that you taught me everything in 2 days. From current bla bla to loops nodes, nodal analys, mesh current problems, max power thevenin.. Dude you are freaking superman of teachers. Not electric, definitely you are good at teaching. Thanks a lot.. No matter passing the exam.
whoa you could start a whole new series on nodal analysis with different methods and solve complex circuits , this video was so fun to watch , pls make more circuit analysis
Another great video; you explained with this video somewhat better the utility of the Thevenin Voltage and Thevenin Resistance. Also, I liked how you showed which current source would be dominant by examining voltage drops through the different resistors!
Thevenin equivalent resistance Rm (in ohms) at terminals (a, b) is Ph a b. 0 R1 9% If v, 2 v, R1 4 ohms, and R2 10 ohms, the current li (in amperes) is b. 0 c. 1.5 d. 3 e. 10 R1 If Vs = 9 V and R = 10 ohms
You are calculating the net resistance between point A and B so , u can see how current can move from B to A and the mentioned current cannot reach point A without going through 17 ohm resistor
10:13 Why the amperage in the 4 Ω resistor is Ι=5 Α. I get that the amperage source is givinge 5 A, but doesn't the voltage source influence the current?
No because two things, there is no current flowing through the 7 ohm so there must be 5 amps flowing thru the 4 ohm, since 5 amps enters that node. And it doesn't matter what the voltage source does, the current source will adjust it's voltage so that there is 5A always flowing thru it's branch. Which includes the 4 ohm in this case too as there isn't even a node between the 5A source and the 4 ohm because, the 7 ohm isn't connected to anything rn.
hey for real... i am studying mechanical engineering and if i see you have a vid on one of my subjects i feel so much relive keep up the good work :) afther i grad will make a donation if you have a paypal or paytrion :)
I have an unrelated question please. I wanna review Organic chemistry but I found 2 playlists. I don't know which one I should pick. What is the difference between the new and the old playlist? Thanks a lot!
at 6:45 why did we remove current source? , like we are ignoring the voltage supply and short circuiting the circuit , but why not do the same for current source?
It may be a little late, but here is the reason. A voltage source turns into a short, because the internal resistance is 0, whereas a current source disappears because the internal resistance is infinite. I don't know exactly why, but that is just what it is.
For two resistors to be in series, it needs to be on the same branch carrying the same current. The 6-ohm and 12-ohm resistors are not on the same branch. If you simply pull the 6-ohm resistor and place it on the left-most vertical branch, it is easier to notice that it is parallel to the 12-ohm resistor.
I don't get it: 1. how is it possible that the current passing through the 6 ohm resistor is not twice as big as the current passing through the 12 ohms resistor since the voltage and current are the same in point D? 2. how can you have a bigger voltage inside your circuit compared to what the source can provide?
I don't quite understand it myself either though I used an app for macOS called iCircuit to create the circuit and his results are correct. I wonder if an analogy would be to a river that receives tributaries and at certain points along the river the contributing flow of water creates separate sections or pools where there would be more water present at some particular points than at others?That's my guess ‼🤕😵💫🤯🤷
Thing is i think sometimes this guy is just bs. Not gonna lie I have studied his shit for a while and they may help at times. but mostly it's just he uses these formulas that don't ake any sense. Like this scenario where Pmax=1/4*vth^2/rth. We know that Pmax is when the rth=rl so p=vth^2/rth...what does the 1/4 do here? In another unrelated topic under probability, when using z table to get confidence levels, he used a simple technique to get AL when that isn't even the way to do it. You just made me look like an idiot trying to explain to my professor how I got my answer.
Final Exams and Video Playlists: www.video-tutor.net/
This man teaches me more than my professor does, thank you sir! (2)
Ur professors goal is to introduce you to the lecture, I don’t think they’re trying to make you get it, if you get it you get it, if you don’t review it. Sadly
@@BiggMOE-jv5jltrue. people think you go to school to learn, you go there to get introduced to topics
@@BiggMOE-jv5jl Your professor's goal is to get their paycheck's
Damn, who is also watching this one day before the exams?😂😂
☝️
You are not alone 😅
That’s bad habit 😊😊😊😊
the hour before exams🥲
Exam is in 30 minutes 😢
I have a biomedical electric circuit exam, I did take 8 lessons this semester and 4 weeks till midterm passed like racing.. I am really grateful to you that you taught me everything in 2 days. From current bla bla to loops nodes, nodal analys, mesh current problems, max power thevenin.. Dude you are freaking superman of teachers. Not electric, definitely you are good at teaching. Thanks a lot.. No matter passing the exam.
😊1
How's Biomedical going for you! - an Undergrad in BME
Hey Where Are You Doing Biomedical? Any Suggestions On How To Survive? 😢
@@Panda...98 he failed
@@Panda...98survival is just an illusion mortal. You must embrace the void
Thank you for your service to humanity.
whoa you could start a whole new series on nodal analysis with different methods and solve complex circuits , this video was so fun to watch , pls make more circuit analysis
th-cam.com/channels/Cmfa1VGGdqnQ1D7q_MOzfA.html
I never understood my lecturer but this man has made me understand everything
Man I dont know your name, but may God bless you everyday!
You have no idea how your videos are helpful for students!
bro just tell me who tf are you. youre the creator of every video im looking for
Another great video; you explained with this video somewhat better the utility of the Thevenin Voltage and Thevenin Resistance. Also, I liked how you showed which current source would be dominant by examining voltage drops through the different resistors!
At 4:08, why can we use the voltage-divider theorem while the two resistors are parallel?
Our professor said at point C, potential is zero. But when I did node analysis it is not zero as you mentioned in video. Thank you!
2 years and still useful, like bro loved the video 🙇🏻♂️
is there a deeper explanation video for these equations?
Very well explained. Really thankful to you for this video.
Finally im looking for this thanks Prof.
I don't knw y anytime I watch ur video
I feel happy
U have charmed me 😂😂😂😂
At 12:28, why not transpose -48 to the right side of the expression?
You have a video for everything, WOW! Thank you sir !
In 7:06 why did he took the 7 ohm resistor? I thought it’ll be zero cause it’s an open circuit?
Pls correct my information
not zero
He is not talking about current , current would be zero
Resistance would not.
Thevenin equivalent resistance Rm (in ohms) at terminals (a, b) is Ph a b. 0 R1 9% If v, 2 v, R1 4 ohms, and R2 10 ohms, the current li (in amperes) is b. 0 c. 1.5 d. 3 e. 10 R1 If Vs = 9 V and R = 10 ohms
I've been waiting for this last year. 🙃 now finally it happens
Regarding at the 2:00 timestamp, shouldn't the 17 ohm resistor cancel out? Since terminals A and B are open.
That's what I thought
You are calculating the net resistance between point A and B so , u can see how current can move from B to A and the mentioned current cannot reach point A without going through 17 ohm resistor
10:13 Why the amperage in the 4 Ω resistor is Ι=5 Α. I get that the amperage source is givinge 5 A, but doesn't the voltage source influence the current?
No because two things, there is no current flowing through the 7 ohm so there must be 5 amps flowing thru the 4 ohm, since 5 amps enters that node. And it doesn't matter what the voltage source does, the current source will adjust it's voltage so that there is 5A always flowing thru it's branch. Which includes the 4 ohm in this case too as there isn't even a node between the 5A source and the 4 ohm because, the 7 ohm isn't connected to anything rn.
hey for real... i am studying mechanical engineering and if i see you have a vid on one of my subjects i feel so much relive keep up the good work :) afther i grad will make a donation if you have a paypal or paytrion :)
did you grad
he died last year in a motorcycle accident
@@steven22
I have an unrelated question please. I wanna review Organic chemistry but I found 2 playlists. I don't know which one I should pick. What is the difference between the new and the old playlist?
Thanks a lot!
Love you bro, truly a master at your craft its inspiring to see
thank you so much, really appreciate your tutorials
uff at last, i have found my medicine for the exam tomorrow🤧🤧
Watching On exam day
Excellent explanation.thank you so much.keep it up❤
Sir can u do a full overview on thermodynamics please . I have many doubts in it
Balamurugan P plz
could you show examples with dependent sources pls
Can any I explain why current due to current source and voltage source is not being added in arm DC?
Hey sir how do you find the percentage of the power supplied the voltage source
how th youmade these become so easy? tysm
is it possible for this circuit to be solved with consecutively Thevenin theorem to find the Vthev and not Kirchhoff?
At 14:25, I used the source transformation method and I arrived at 36V for Vth not 56V.
I actually used source transformation and was able to get 56V
I also obtained Vth as 56V
this guy is my messiah
Why do you multiply by a quarter when you calculate the power from where it comes from?
For the first example whats the methos called when u basically combined the 17R and 24R to have a simpler circuit to solve for Vth
thanks for the great video
THIS NIGGA ALWAYS SAVES ME IN MY FINALS
at 6:45 why did we remove current source? , like we are ignoring the voltage supply and short circuiting the circuit , but why not do the same for current source?
It may be a little late, but here is the reason. A voltage source turns into a short, because the internal resistance is 0, whereas a current source disappears because the internal resistance is infinite. I don't know exactly why, but that is just what it is.
GREAT. job know I understand how Thevenin theorem works.
Thanks from Somalia
Nice lecture keep it up
I love this man
it looks simple
Please cover all the science topics
What do u mean by PL/RL
Thank you very very much.
If power =V*I , indicates which values of V & I are the maximum power point
Thank you so much!
Why need to change the resistance from 1/6 same as 2/12? Why must change it?
Just to simplify the calculations since he's not using a calculator. You can use it directly no problem
On 6:58, he says that the 6ohm is parallel with the 12 ohm. How come the 6 ohm and 12 ohm aren’t in series but are parallel?
For two resistors to be in series, it needs to be on the same branch carrying the same current. The 6-ohm and 12-ohm resistors are not on the same branch. If you simply pull the 6-ohm resistor and place it on the left-most vertical branch, it is easier to notice that it is parallel to the 12-ohm resistor.
Thank you sir.
😁😁😁😁you are just awesome 😁😁😁.... Nothing to say
I don't get it:
1. how is it possible that the current passing through the 6 ohm resistor is not twice as big as the current passing through the 12 ohms resistor since the voltage and current are the same in point D?
2. how can you have a bigger voltage inside your circuit compared to what the source can provide?
I don't quite understand it myself either though I used an app for macOS called iCircuit to create the circuit and his results are correct. I wonder if an analogy would be to a river that receives tributaries and at certain points along the river the contributing flow of water creates separate sections or pools where there would be more water present at some particular points than at others?That's my guess ‼🤕😵💫🤯🤷
why was there no current flowing through the 17 ohm resistor
thank you so much but please try to make "t" better ... it look like V(t+h).
but love you !!!!!! 🥰
thank you pretty much!
Thank You
WHY IS THE 12 OHM RESISTOR IS IN PARALLEL WITH THE 24 OHM RESISTOR RATHER THAN IN SERIES
thanks prof.
what do u mean PL
/RL=0
good video
Tell me please::
device name you writing 📝📝📝✍✍✍🙏
Lakshan Chamod did he tell you in person
Your work in electronics is a mile wide and an inch deep. I hope actual EE students aren’t miss lead by a high school level treatment. They will fail.
I am an EE student in college and these videos have been saving me, although I am only in the first class in my Universities EE line.
Now I know thevenin !
I love your voice
Bro but seriously how tf do you have all these knowledge
Great.. Thanks :)
Van mesh be applied to donit
thank youuuu
There was a mistake in Pmax expression. Here is the correct one Pmax = 1/8 (Vth^2)/Rth
He is crt
Couldn’t you just use source transformation to simplify this. Seems rather tedious using pure nodal analysis
I love you !!
Genius
source transformation
is there anything that you can't teach. 🤯🤯
❤️
woah i’m kinda early
JEE EXAM 😆
Ok
Comment
you beautiful bastard
First
Thing is i think sometimes this guy is just bs. Not gonna lie I have studied his shit for a while and they may help at times. but mostly it's just he uses these formulas that don't ake any sense. Like this scenario where Pmax=1/4*vth^2/rth. We know that Pmax is when the rth=rl so p=vth^2/rth...what does the 1/4 do here? In another unrelated topic under probability, when using z table to get confidence levels, he used a simple technique to get AL when that isn't even the way to do it. You just made me look like an idiot trying to explain to my professor how I got my answer.
You are dead wrong, 1/4 is needed.
Your the best 🫂🫂🫂🫂