I was looking for this steering wheel because my previous owner put it onto an 86 GMC. The Hayne's manual and parts store didn't match up to this horn button cover. Now I have to figure out if it's just the steering wheel they Frankensteined in or the whole steering column. Troubleshooting my horn. This was extremely informative.
thank you ~ thank you ~ thank you ~ thank you ~ i really appreciate your video. restoring my 1993 Astro Van - i bought brand new in 1993. thank you ~ again
So the MUCH easier way to do that harness is to bring a string through when you pull the wires back. That way, you have a lead to pull the other way and don't have to worry about damaging anything with that screwdriver you used...
Thank you! I have a 1993 Chevy k1500 Suburban and I am pretty new to fixing automotive issues. It has been exciting to slowly tackle each issue myself. Thank you for helping me learn more and be able to fix my horn too!
VERY NICE VIDEO !!! Thank you for making it and posting it. (You forgot to re-install your Emergency Flashers button, on the side.) Here's a tip, for you. You can very easily make a connector to hold your cell-phone to your shirt, so you can do videos like this, with a squeeze type paper clip (with the fold down squeeze handles), and 2 thick rubber band's and a little strip of tissue paper. Do a Lark's head knot with the rubber-bands, each thru each clip handle. Then put the tissue around your cell-phone and then the rubber-bands around that; split the difference from the ends of the unit. *DONT cover the camera*! (The tissue is to protect the phone from the rubber band and clip. You can skip that protection if you want). Then, just clip the spring clip to what you want to. You MAY need to put something behind the unit(inside your shirt), so it will aim where you want it to, like a roll of socks. . What little set-up it takes beats trying to hold a cam and do everything one handed. This can be applied and removed quickly. (( Be careful not to let the clip scratch your phone that's one of the things the tissue is for. )) Thanks again for your video !
You just saved my ass. I couldn’t remember where the copper forked flat wires went and it turns out it’s behind the turn signal control ring. Haha oops
@@9thGenAccord thank you for your understanding and willingness to help repair a turn signal clutch. I do appreciate your information on removing and replacing it though.
Have a question the right turn single on my 1989 Chevy truck is not working it won’t go all the way up to but also my right taillights is not Turing on when but my question is can I put a switch from any year like from 90-98 or will it have to be a 89
Just wanted to say thank you, my switch got stuck on high beam and my high beams lights went out. I thought I wasn't going to be able to drive my truck at night. Watching your video I can see that rod to switch it manually underneath the steering column.
@@zedapro1231 I haven't fixed my turn signal switch yet but I was able to change from high beam to low beam but grabbing the switch rod and pushing it manually underneath the steering column.
I have a 1988 Chevrolet Silverado c1500 2wd 5.7 engine my steering wheel is like the one you have . I'm having a problem with getting the horn wire hooked up where it locks in the white part . Anything you can tell me would be great
I have a 91 and I'm having problems with the turn signal indicator not responding... sometimes it works... sometimes it doesn't... the fuse is good... Watching you take this apart is making me think, this is what my problem is; Was this the same problem you had?... that you needed to replace the insides?
Do you know how I can disconnect the whole horn? Mine is stuck on when i turn the steering wheel. I removed the fuse but that caused other issues. I cant find the relay or wire inside the steering column. I already removed the wire from the steering wheel. 89 chevy silverado
What if whenever I turn my steering wheel left the horn goes off? It’s not always like that either if I move it up and down and be careful with it because it’s sensitive it’ll continue to work normally but I’ve been having to remove the fuse which disabled my dashboard lights and brake lights as well. Any ideas it would be greatly appreciated the previous owner put an aftermarket steering wheel on and I’m wondering if that has something to do with it.
Hi. I have a 1989 gmc and when I turn on my turn signal left or right and I press the brake the turn signal just pauses. When I let go of the brake the turn signal resumes blinking. Thanks in advance
![[LIVE] : ONE ลุมพินี 78 | คู่เอก "ปกรณ์ vs ฟาบิโอ"](http://i.ytimg.com/vi/LSOmgl0Th2c/mqdefault.jpg)
Clear, concise, well explained! Nice job. Thank you. Mine was a '91 C1500.
I was looking for this steering wheel because my previous owner put it onto an 86 GMC. The Hayne's manual and parts store didn't match up to this horn button cover. Now I have to figure out if it's just the steering wheel they Frankensteined in or the whole steering column. Troubleshooting my horn. This was extremely informative.
thank you ~ thank you ~ thank you ~ thank you ~ i really appreciate your video. restoring my 1993 Astro Van - i bought brand new in 1993. thank you ~ again
Please add the ac delco part numbers used. Very helpful video, thanks
Thank you so much sir, a lot of the videos I've watched just flew through, I fixed my turn signals and horn very quickly thanks to you
So the MUCH easier way to do that harness is to bring a string through when you pull the wires back. That way, you have a lead to pull the other way and don't have to worry about damaging anything with that screwdriver you used...
Thanks man I’m 16 and I fixed my own horn because of you thanks
What’s the part name with the white shaft the horn plugs into?
Thank you, you made the job so much easier. On my 94 Chevy Silverado the lever broke, the one that holds the turn signal lever in place. Great video👍
Thank you! I have a 1993 Chevy k1500 Suburban and I am pretty new to fixing automotive issues. It has been exciting to slowly tackle each issue myself. Thank you for helping me learn more and be able to fix my horn too!
absolute life saver. best steering wheel teardown on these trucks
ACDelco D6262D Professional Turn Signal Switch
Thanks I have an 86 Silverado which is pretty much the same but this really helped
thank god finally a video thats exactly my truck and what i need to do to it. my drugee dad ruined all these parts by hotwiring my truck
Good vidoe. Thanks
This was extremely helpful. Thank you👍🏻👍🏻👍🏻
Looks like I know what I’m doin next weekend. Now that I know what the problem is. Thanks for the vid. I’m gonna be watching this as I do it.
VERY NICE VIDEO !!! Thank you for making it and posting it.
(You forgot to re-install your Emergency Flashers button, on the side.)
Here's a tip, for you. You can very easily make a connector to hold your cell-phone to your shirt, so you can do videos like this, with a squeeze type paper clip (with the fold down squeeze handles), and 2 thick rubber band's and a little strip of tissue paper. Do a Lark's head knot with the rubber-bands, each thru each clip handle. Then put the tissue around your cell-phone and then the rubber-bands around that; split the difference from the ends of the unit. *DONT cover the camera*! (The tissue is to protect the phone from the rubber band and clip. You can skip that protection if you want). Then, just clip the spring clip to what you want to.
You MAY need to put something behind the unit(inside your shirt), so it will aim where you want it to, like a roll of socks. .
What little set-up it takes beats trying to hold a cam and do everything one handed. This can be applied and removed quickly. (( Be careful not to let the clip scratch your phone that's one of the things the tissue is for. ))
Thanks again for your video !
Very helpful. I have no horn hopefully replacing the plastic horn part fixes my horn
Fixed my horn. Thank you.
Great video; clear and concise. Thank you!
Thanks, man. That was extremely helpful.
Thanks good video. This will help with my gmc van.
This one was the most useful video yet for this job, thanks.
You just saved my ass. I couldn’t remember where the copper forked flat wires went and it turns out it’s behind the turn signal control ring. Haha oops
Wow. You smacked right past the part of separating the two parts that make the guts. Thanks.
Sorry I guess I did not get that check you mailed! How bout putting it in the mail and then I can cater to just YOU since its all about you!
@@9thGenAccord thank you for your understanding and willingness to help repair a turn signal clutch. I do appreciate your information on removing and replacing it though.
Great video, need to fix my truck's turn signal
Just what I needed! I appreciate it. Thanks
Turn signal cam
Is the white thingy with the plastic shaft that the horn plugs into
Have a question the right turn single on my 1989 Chevy truck is not working it won’t go all the way up to but also my right taillights is not Turing on when but my question is can I put a switch from any year like from 90-98 or will it have to be a 89
Very very good details video
Superb video, thanks for sharing!
Dorman horn wire 41319 ac delco turn signal cancel 26047013
horn wire 49319
Great video! Very helpful!
Just wanted to say thank you, my switch got stuck on high beam and my high beams lights went out. I thought I wasn't going to be able to drive my truck at night. Watching your video I can see that rod to switch it manually underneath the steering column.
how did you fix it? my highbeams dont work and im trying to figure out how to fix it. i would appreciate your help
@@zedapro1231 I haven't fixed my turn signal switch yet but I was able to change from high beam to low beam but grabbing the switch rod and pushing it manually underneath the steering column.
Very well done, gonna help immensely.
You forgot to put the hazardous light switch back on.
Thank you Sir
Very good video,thanks for your time the video is amazing
Thank you very much!!!!
I have a 1988 Chevrolet Silverado c1500 2wd 5.7 engine my steering wheel is like the one you have . I'm having a problem with getting the horn wire hooked up where it locks in the white part . Anything you can tell me would be great
i have a hard time setting the Horn string into that hole. how did you do it??
Not a lot of older truck steering wheel videos. Looks like ne keys? did you replace lock cylinder?
How can i look for this parts? Do you have part numbers or someting. My major problem is that my horn and my high beams dont work
Do you know whats the number part for the clip that makes a bell noise when you put the key too the steering wheel ? By any chance?
Good job have to do mine thanks for the video 👍🏻☝️😀
Perfect
Very Good-Thanks a lot.
What size bolt did you end up using for the puller? The puller I rented does not seem to have the right size bolt.
I enjoyed that thank you. I even more enjoyed looking at how good shape your 88 is. I have an 88 2500 and bringing it back. Very impressive interior !
Damn this is exactly what’s wrong with my truck as well
I'am Your Newest Subscriber Great Videos
Best video
I have a 91 and I'm having problems with the turn signal indicator not responding... sometimes it works... sometimes it doesn't... the fuse is good... Watching you take this apart is making me think, this is what my problem is; Was this the same problem you had?... that you needed to replace the insides?
My steering wheel is off center, does the steering wheel have a “keyed” spline or can I simply pull it and reposition it? Gary in Northwest Nebraska
Thank you!
Do you know how I can disconnect the whole horn? Mine is stuck on when i turn the steering wheel. I removed the fuse but that caused other issues. I cant find the relay or wire inside the steering column. I already removed the wire from the steering wheel. 89 chevy silverado
Very good video 👍
What if whenever I turn my steering wheel left the horn goes off? It’s not always like that either if I move it up and down and be careful with it because it’s sensitive it’ll continue to work normally but I’ve been having to remove the fuse which disabled my dashboard lights and brake lights as well. Any ideas it would be greatly appreciated the previous owner put an aftermarket steering wheel on and I’m wondering if that has something to do with it.
Lol you ever figure it out I’m having the same problem
what is the cancel ring part number? any ideas where to buy one?
Is there a way to move the steering wheel to move it up or down?
It has tilt steering.
How did u know to do all of this to fix your horn I have a 1994 blazer full size and my horn doesn’t work
IDK I just am really good a repairing stuff.
Does anyone know what the black plastic cover is called or even a part # the one that the second puller is used for
Now I hope I can do mine.
For the horn wire is the black tube supposed to go all the way or stick out?
You have the part number for the horn wire cam by chance..? 🤔 Or a link to order it..? Lol
90Silverado truck has new feel pump new sensor and only one break light it turns one only when it wants too and no Horn new help with my trouble
You forgot a piece in your steering wheel. It's a big piece towards the end that needs to go back on there
How do I look for cancel ring
What’s the bolt pattern on wheel?? I’m showing around for new 1 and have no idea what it is
What is the thread size for the 2 bolts that went into sterring wheel.
Been waiting for a video like this thankss
Do i need the horn cap contact ring ? I don’t find the part number can you help me?
Anyone one where i can find a cancel ring for a 1994 silverado or how is it actually called
Sounds lime dan harmon's doing car tutorials
What was the cost replacement share if you don’t mind.
I had to remove 2 screws to get the plate off on 93 blazer
So we replaced the multi switch. And still the same problem. Not sure what is wrong
do you have the part number for the cancel ring (the part with the white plastic)?
Found it; ACDelco 26047013 Turn Signal Cancel Cam
Where did you get the plastic that the horn wire goes into?
ACDelco 26047013 GM Original Equipment Turn Signal Cancel Cam on Amazon for $20
At 0:33 how tf did u pull that top part off bc mine wont come off
What are the parts that I change called?
Hi. I have a 1989 gmc and when I turn on my turn signal left or right and I press the brake the turn signal just pauses. When I let go of the brake the turn signal resumes blinking. Thanks in advance
Your out of blinker fluid
I didn't see the part number for that horn part or the switch unless i missed it
I don’t see anywhere the turning signal number part 😩
88-98 wrong. They changed along the way. My 93 is a lot different. 95 and up are different yet.
Why don’t you have a friend film while you do the work?
You move tomach on the video you can't do everything alone. Everybody have two hands.and you used only one
Do you happen to know what part number(s)for the horn?
Where’s the airbag
It doesn’t have airbags. Cars made before 1998 didn’t need to have them.
No air bag
Rent the tools from auto zone free
Great video very informative thanks for making!