RAMPS 1.4 - Basics
ฝัง
- เผยแพร่เมื่อ 22 ต.ค. 2017
- A basic introduction to the functionality of RAMPS 1.4 and how to program with Marlin firmware.
One Time Tips, You Can PayPal Me:
www.paypal.me/EBraiman
Discord:
/ discord
Patreon:
/ edbraiman
buymeacoffee:
www.buymeacoffee.com/ebraiman
Required hardware:
RAMPS 1.4 board
Arduino MEGA 2560
USB Cable
Required software:
Arduino IDE (version 1.8.2 or higher)
www.arduino.cc/
Marlin Firmware (version 1.1.6)
marlinfw.org/
Patreon:
patreon.com/ebraiman
Thanks for showing how everything works - giving me the confidence to do a Hypercube build!
Np,
I have to say that your videos are the best I have seen on this subject .Being an old fella with 50 yrs in the joinery trade to keep the old grey matter working I am trying something new CNC router self build and a 3D printer self build keeping my pockets empty and my head all agog (fantastic) thanks to you for your straight forward easy to follow videos keep up the great work
Thank you.
Thank You was the only viceo I found that was straight forward with the procss. I messed up and attempted this with the ramps piggybacked, no go.
+RJ Myers no problem. I'll be posting more subscribe and suggest content you want to see.
thanks for the video most people talk to fast and i found you are very easy to understand and you show people on how easy it is to do it going to make my work a lot better and if i follow you i will not stuff it up 10/10
+Dale Branch Thank you, the video quality will be getting better. I've got lighting booms coming, sound dampening form for the bounce I hear in preproduction and a new external mic for this camera. And finally in a couple of weeks I'll be increasing the resolution with a better camera. If most people have not seen all the RAMPS videos are CC in 70 or more languages. I'm trying to improve the viewers understand and my skills at presentation. So just a small hint another tutorial series is being planned, but I'm going to remain quiet on the details until 50% is in the film can.
just keep doing what you are doing its great mate just to let you got as far as Australia and if someone wants info i will show them to your videos
I am converting a bricked xyz da Vinci jr 1.0 from the proprietary software to Ramps (my first 3d printer), and your videos have been invaluable so far. I will work my way through them one by one as I am offically on the wiring phase, and ill be taking notes on your videos where to reference to make the software adjustments. Thanks for putting all these together, breaking TONS of information down into more manageable pieces.
You're welcome.
heyy, ditto, how did it go? I'm just getting ready to convert a Pro 1.0A (junior) myself :D
@@TheMrPopper69 Good and not so good. I could never get the optical sensors to work and I don't have a 3D printer to make brackets for mechanical switches, but I was hoping to work around that temporarily. I got the rest of the wiring completely finished and operational, the reason this is still a bricked unit is because I could never figure out the configurations on the software. If I had more experience with the programming side of 3D printers, I can get this working... I think.
Many thanks Edward. Really great explaination, appreciate... Happy to see your series as the first thing i found via Google and RAMPS was that most ppl are damaging their 5volt regulator on the Arduino so I was not sure how to power up / programm without damaging... Simply questions like do I am allowed to connect the Arduino via USB while 12 v is connected ? All the connection stuff I was a bit scared not to damage anything. Your explaination here clearly shows how to progress. Really appreciate. Next to go to add the drivers and motors and I just figured out thats also the next on your video list :-)
+Thomas Bauer ty
This is all very new to me, but I have a question. I'm building a small 3-axis cnc plasma table using nema 17 motors and v-slot extrusions. I ordered three motor drivers and an EC-300 Ethernet control board (ethernet seems less affected by the high frequency interference of the plasma arc than usb). I see your Ramp setup doesn't use separate motor drivers like a cnc machine does. Is there a reason a 3d printer can connect the x,y,z motors to a single board but cnc machines have to run a separate driver for each motor? Seems like the Ramp card serves as an easier setup but maybe it's a power requirement issue? Just curious since this will be the first time I wired a cnc machine. Thanks. Subscribed.
Hi, Thank you for your very to the point, and simple explanation of all Ramps Board. I'm new at this ( as I'm sure you've heard a million times ), and i'm very good at building things, but it's the electronics ( software / hardware ) that i need to learn. I'm pretty proficient with the basics of 3D printer build, but i'm wanting to venture into Laser build using this board setup. Would you have the time to help me learn how to setup the board, and software for a laser? Any help would be much appreciated.
I'm planning on doing a video someday on lasers, but there are many dangers involved. First ventilation, second eye protection, third fire. If you can address these first look in board.h file with Marlin firmware. Then research gcodes for for command codes. My fear is people injuring themselves, so I've avoided the subject.
Edward Braiman yes I fully understand those points, to the extent the first thing I did when I got my cheap 2W to play with, was to throw away the worthless glasses they give. Basically just plastic. I spent the $$ on once from a reputable laser company.
Well if you do end up doing a guide to basic hardware software setup, I'll be watching it.
B.
I still need to purchase a laser and figure out safe way to dissipate the beam. Maybe tube of water, but I'll need to research all aspects of it first.
Thanks for the video.
I am kinda noobie in this but I need help with testing this part
how can I know if the Arduino and the shield working well!!
my 3d printer was working well until it stopped
there is electricity in it but no led blinks or anything is that normal?
Sometimes in the printer software like Pronterface or OctoPrint you can turn on more messages. My guess is something is occuring with a thermistor. Seeing the stop code might help you diagnose the issue.
Hi, I'm using ramps 1.6 and from last few days extruder not heating.
thank you! just wondering if we can connect to arduino/RAMPs wirelessly
It's possible.
You can with UNIVERSAL GCODE SENDER, enable the http bridge to serial port.
Hello. I have done all the steps you did I did not link endstop and hotend. While printing the model, the motors run for a while and then stop. Should be linked hotend and andstop ?
Printer stopping can have many reasons from thermistor failure to overheating steppers. Normally there's an error code that displays.
I wanted to see if the motors were running fine. I used nema 17 and a4988 with 1.4 rampes shield and arduino mega but it didn't work. Should I connect hotend and endstop too?
@@EdwardBraiman th-cam.com/video/qlu-RA1gDnU/w-d-xo.html
@@mohmoh-wk7ke So is there a message in Pronterface?
hello I would like to know how to connect probe pinda v2 and sensor filament on the plate ramps 1.6 could help me.
Do you have a link to probe?
thank you !
I have a problem with my card was working normally and suddenly it stopped working and a red light lit up. Can you help me . thanks
What seems to be the problem? Could you give me more detail on the card that seemed to stop working? Is only 5 volts being used?
The problem is card Arduino gets hot , the ramps lunch on 12 v , if we can communicate on social media will be easier . Thanks again 😁
What's connected to RAMPS board be specific?
Don’t know where to post this but on my ramps 1.4 is plugged in to the usb the screen is fine but when I apply power from the power supply unet the screen goes all pickselated
Not sure I understand what under is? Can you post a link to what's occuring in TH-cam?
Can i use USB ASP programmer in RAMPS 1.4
If you're referring to Arduino studios ide or VScode with PlatformIO, then yes.
Hello. Does ramps + arduino mega + marlin make it so you can run gcode instead of sketches?
Yes, but Marlin's version of gcodes
@@EdwardBraiman Great! Thanks! I use a marlin setting generally. Very helpful ;)
You're welcome.
We need a video on the BTT TFT35 E3 V3 udisc is giving cold extrusion error and the stops printing,
One which motherboard?
@@EdwardBraiman I am using the skr v2 and the tft35 e3 v3 I have it installed on my ender 6. Thanks for all your videos by the way you are awesome!! Keep up the good work!! I am going to try a firmware update on the TFT35 as soon as my print finishes. I will let you know if it helps the problem. It looks like an update came out 3 days ago.
You're welcome.
@@EdwardBraiman upgrading the firmware didn't help I'm still getting cold extrusion warnings and print stops because it has lost temp. This only happens when printing from udisk I have another tft35 that I bought for my ender 5 so I will try switching screens and see if there is a problem with the screen itself but I doubt it. To be clear the print starts out fine but after a little while it starts losing temp and then gives a cold extrusion error.
It might be easier to troubleshoot this on my Discord link in description below.
what power supply do you use ?
Here is the link for RepRap ... reprap.org/wiki/Power_Supply ... Remember it's only 12v on this board.
can this 1.4 ramps be used for cnc routers?
Yes.
I going to use it to make my own filemant
Interesting.
Hi, I have a problem..my when I connect the ramps1.4 to the arduino mega then via usb cable to my pc...the ramps' led don't light ;(
Do you see the Arduino in device manager on your computer? Do you have Arduino IDE loaded on your computer? What type of operating system are you using? Do you know if USB cable is good?
@@EdwardBraiman I have all this.. When I connect my arduino to the pc.. It read it normaly but when I mount the ramps on the arduino no thing happens
Sounds like RAMPS board has an issue. Check what's connected to RAMPS and remove everything you can. If it starts working then one component is bad maybe. Also what components are connected to RAMPS board?
@@EdwardBraiman no thing changes sir.. I think my ramps damaged
It appears to be. Remove jumpers just in case and try one last time.
can this setup be flashed with GRBL?
From what I just read online for GRBL, yes. Based on it will work with the mega2560. Keep in mind I've not worked with this firmware.
@@EdwardBraiman ok thanks for the reply!
You're welcome.
My stepper cant reverse why. I have been for a cable, thats ok replace motor , but axis y cant reverse.?
I gave a signal to the left he turned to the left and I gave a signal to the right the motor kept turning to the left
Was it homed to the endstop? It might not know position in space.
@@EdwardBraiman not on endstop, do you have a telegram so I can send the video., Please help me
Only on Discord, there's a link on channel.
Are jumpers compulsory?
Depends on what you're doing.
For 3d printing?
hi, a question, how clone steper motor in Y axis with 2 motors in ramps 1.4 ?
Stepper extender or split output. There is a tutorial one one or both in RAMPS playlist.
Sorry but My Bad English, You are beautiful
Can You give me link to video please ?
Go-to to www.edwardbraiman.com and it's in a Playlist.
@@EdwardBraiman i can't see video of clone axis Y :(
Bonjour 🤝
Merci pour vôtre vidéo
Quelle est la différence entre ces cartes:
Mega 2560 R3
L293D
UNO R3
rampes 1.4
rampes1.5
rampes1.6
Merci
La différence entre MEGA2560 et UnO est le traitement de la prower.
@@EdwardBraiman Merci de ta réponse mais je me suis mal exprimé.
Si je veux fabriquer une imprimante 3D quelle carte je peux prendre?
Est-ce la même si je fabrique un graveur laser, un routeur ?
merci
Can we use E0 and E1 as x and y clones 🤔🤔🤔🤔
Interesting question, yes. It's in the advanced tab of Marlin firmware.
@@EdwardBraiman Related to the previous question, I am building as cheap as possible a MPCNC and I will use all drivers (5) using Marlin, the steppers will be 2 Amps each, is it possible to feed the board with 12 Volts/12Amps on both power terminals and make all steppers works?
thx you
Depends on type of power supply rating.
Edward Braiman max amps that will be used is about 10 Amps (5 times 2Amps) so I figure out that 12V/12A will do it .
Again thx
You might want to check out the reprap wiki page for the recommended power supply.
Are-Dooo-Eeee-No
Just saying...
Why do you say "Adruino" instead of "Arduino"?
Thanks.
Hey again! I am building a delta 3d printer and i dont think marlin is the right firmware. Do you have and alternatives? If marlin can run a delta, please explain how. Thanks!
Marlin firmware can run Delta 3d. I've not yet built a Delta 3d, but look in the Marlin folders for examples. File compare configuration.h file with fresh configuration.h file to see what was changed. This will give you clues on what to configure. Good luck.
Hey again. Sorry i guess i did not understand. You mean i go in configuration.h and look for delta settings? Maybe this could be a good video topic because i cant find anything to help me with marlin combined with delta style 3d printing. Thanks
If you navigate to the folder path in the Marlin/example_configurations/Delta/generic . I would do a tutorial, but I do not have a Delta type printer, mostly because I print wide based models.
@@EdwardBraiman Great! Thanks
You're welcome
Adrino, mispronounced, it is ARE DOino, or you can start spelling it Adraino
Thanks.
That IS NOT an "adrino". It's an ARDUINO.
ARR + DUE + EENO.
Or a Italian bar.
Adrino...
You keep using that word, I don't think the word is what you think it is. (I know, not a perfect quote but best I could do).
Clone mk2.5 Prusa
Why don't 32 bit boards have this many Servo ports Step backwards in technology
It's based on an open source design, so the designer seemed to think it wasn't required. I agree four or five servos would be nice. In some respects the stepper motors can do some of the same functionality, but with more pins.
He keeps saying Adrino. Come on man WTF?
Thanks.
are-dweno ! not adwerno !
Thanks.
Arduino = Ard-joo-WEEN-o. Not Uh-DREEN-o. It's only 7 letters.
Dude you really need to learn how to say "Arduino", not "Adrino". Its actually annoying lol
Thanks.